Mercurial > public > ostc4

view Documentations/dump-disc.cfg @ 483:90d1f793dcf2 FixLayout_Header_LogView

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Development option only read bottledata: If the header divisor is set (in my case because of switching between development and main versions) the samples need to be read considering the bottle values, too. Divelogs written by a SW not supporting bottle pressure have the divisor set to 0 => no impact to main SW Bugfix header memory layout: The batterygaugeregisters were not used and will be reused for other information. To keep the OSTC3 format up and running the datafield is not filled with "0x00"
author ideenmodellierer
date Tue, 26 May 2020 21:12:02 +0200
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f427IIT6
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

puts "Flash banks:"
flash banks

#puts "Reading FIRMWARE..."
# Requires OpenOCD 0.10.0 / released January 2017 ?
#flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000

#puts "Done."
exit