Mercurial > public > ostc4
view OtherSources/data_central_mini.c @ 726:8f3a8c85a6c4
Bugfix data synchronization after RTE start:
In previous version invalid data may be transferred in case the communication is corrupted directly after RTE startup. Root cause was that the data was evaluated without caring if a communication error was reported. In the new version the startup condition and evaluation of data is only done if valid data has been received by the RTE => SPI communication is up and runnig.
author | Ideenmodellierer |
---|---|
date | Sat, 14 Jan 2023 20:35:40 +0100 |
parents | 7801c5d8a562 |
children |
line wrap: on
line source
/** ****************************************************************************** * @copyright heinrichs weikamp * @file data_central_mini.c - bootloader only - * @author heinrichs weikamp gmbh * @date 10-November-2014 * @version V1.0.3 * @since 10-Nov-2014 * @brief * @bug * @warning @verbatim @endverbatim ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2015 heinrichs weikamp</center></h2> * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include <string.h> #include "data_central.h" #include "stm32f4xx_hal.h" #include "crcmodel.h" void translateDate(uint32_t datetmpreg, RTC_DateTypeDef *sDate) { datetmpreg = (uint32_t)(datetmpreg & RTC_DR_RESERVED_MASK); /* Fill the structure fields with the read parameters */ sDate->Year = (uint8_t)((datetmpreg & (RTC_DR_YT | RTC_DR_YU)) >> 16); sDate->Month = (uint8_t)((datetmpreg & (RTC_DR_MT | RTC_DR_MU)) >> 8); sDate->Date = (uint8_t)(datetmpreg & (RTC_DR_DT | RTC_DR_DU)); sDate->WeekDay = (uint8_t)((datetmpreg & (RTC_DR_WDU)) >> 13); /* Convert the date structure parameters to Binary format */ sDate->Year = (uint8_t)RTC_Bcd2ToByte(sDate->Year); sDate->Month = (uint8_t)RTC_Bcd2ToByte(sDate->Month); sDate->Date = (uint8_t)RTC_Bcd2ToByte(sDate->Date); } void translateTime(uint32_t tmpreg, RTC_TimeTypeDef *sTime) { tmpreg = (uint32_t)(tmpreg & RTC_TR_RESERVED_MASK); /* Fill the structure fields with the read parameters */ sTime->Hours = (uint8_t)((tmpreg & (RTC_TR_HT | RTC_TR_HU)) >> 16); sTime->Minutes = (uint8_t)((tmpreg & (RTC_TR_MNT | RTC_TR_MNU)) >>8); sTime->Seconds = (uint8_t)(tmpreg & (RTC_TR_ST | RTC_TR_SU)); sTime->TimeFormat = (uint8_t)((tmpreg & (RTC_TR_PM)) >> 16); /* Convert the time structure parameters to Binary format */ sTime->Hours = (uint8_t)RTC_Bcd2ToByte(sTime->Hours); sTime->Minutes = (uint8_t)RTC_Bcd2ToByte(sTime->Minutes); sTime->Seconds = (uint8_t)RTC_Bcd2ToByte(sTime->Seconds); sTime->SubSeconds = 0; } /* This is derived from crc32b but does table lookup. First the table itself is calculated, if it has not yet been set up. Not counting the table setup (which would probably be a separate function), when compiled to Cyclops with GCC, this function executes in 7 + 13n instructions, where n is the number of bytes in the input message. It should be doable in 4 + 9n instructions. In any case, two of the 13 or 9 instrucions are load byte. This is Figure 14-7 in the text. */ /* http://www.hackersdelight.org/ i guess ;-) *hw */ uint32_t crc32c_checksum(uint8_t* message, uint16_t length, uint8_t* message2, uint16_t length2) { int i, j; uint32_t byte, crc, mask; static unsigned int table[256] = {0}; /* Set up the table, if necessary. */ if (table[1] == 0) { for (byte = 0; byte <= 255; byte++) { crc = byte; for (j = 7; j >= 0; j--) { // Do eight times. mask = -(crc & 1); crc = (crc >> 1) ^ (0xEDB88320 & mask); } table[byte] = crc; } } /* Through with table setup, now calculate the CRC. */ i = 0; crc = 0xFFFFFFFF; while (length--) { byte = message[i]; crc = (crc >> 8) ^ table[(crc ^ byte) & 0xFF]; i = i + 1; } if(length2) { i = 0; while (length2--) { byte = message2[i]; crc = (crc >> 8) ^ table[(crc ^ byte) & 0xFF]; i = i + 1; } } return ~crc; } uint32_t CRC_CalcBlockCRC_moreThan768000(uint32_t *buffer1, uint32_t *buffer2, uint32_t words) { cm_t crc_model; uint32_t word_to_do; uint8_t byte_to_do; int i; // Values for the STM32F generator. crc_model.cm_width = 32; // 32-bit CRC crc_model.cm_poly = 0x04C11DB7; // CRC-32 polynomial crc_model.cm_init = 0xFFFFFFFF; // CRC initialized to 1's crc_model.cm_refin = FALSE; // CRC calculated MSB first crc_model.cm_refot = FALSE; // Final result is not bit-reversed crc_model.cm_xorot = 0x00000000; // Final result XOR'ed with this cm_ini(&crc_model); while (words--) { // The STM32F10x hardware does 32-bit words at a time!!! if(words > (768000/4)) word_to_do = *buffer2++; else word_to_do = *buffer1++; // Do all bytes in the 32-bit word. for (i = 0; i < sizeof(word_to_do); i++) { // We calculate a *byte* at a time. If the CRC is MSB first we // do the next MS byte and vica-versa. if (crc_model.cm_refin == FALSE) { // MSB first. Do the next MS byte. byte_to_do = (uint8_t) ((word_to_do & 0xFF000000) >> 24); word_to_do <<= 8; } else { // LSB first. Do the next LS byte. byte_to_do = (uint8_t) (word_to_do & 0x000000FF); word_to_do >>= 8; } cm_nxt(&crc_model, byte_to_do); } } // Return the final result. return (cm_crc(&crc_model)); } uint32_t CRC_CalcBlockCRC(uint32_t *buffer, uint32_t words) { cm_t crc_model; uint32_t word_to_do; uint8_t byte_to_do; int i; // Values for the STM32F generator. crc_model.cm_width = 32; // 32-bit CRC crc_model.cm_poly = 0x04C11DB7; // CRC-32 polynomial crc_model.cm_init = 0xFFFFFFFF; // CRC initialized to 1's crc_model.cm_refin = FALSE; // CRC calculated MSB first crc_model.cm_refot = FALSE; // Final result is not bit-reversed crc_model.cm_xorot = 0x00000000; // Final result XOR'ed with this cm_ini(&crc_model); while (words--) { // The STM32F10x hardware does 32-bit words at a time!!! word_to_do = *buffer++; // Do all bytes in the 32-bit word. for (i = 0; i < sizeof(word_to_do); i++) { // We calculate a *byte* at a time. If the CRC is MSB first we // do the next MS byte and vica-versa. if (crc_model.cm_refin == FALSE) { // MSB first. Do the next MS byte. byte_to_do = (uint8_t) ((word_to_do & 0xFF000000) >> 24); word_to_do <<= 8; } else { // LSB first. Do the next LS byte. byte_to_do = (uint8_t) (word_to_do & 0x000000FF); word_to_do >>= 8; } cm_nxt(&crc_model, byte_to_do); } } // Return the final result. return (cm_crc(&crc_model)); }