Mercurial > public > ostc4
view OtherSources/data_exchange_main_mini.c @ 276:8e9c502c0b06 IPC_Sync_Improvment_3
Rework pressure/ temperature data aquisition
The data data provided by the I2C data had been used for calculation independend if transmission was successfull or not => state evaluation added
In the previous version data with resolution 0.5mBar and temperature was requested per cycle inparallel. This has been replaced by a requested resolution of 1mBar and an alternating aquisition (pressure / temp update every 200ms instead every 100ms) => reducing busy wait time and power consumption
author | ideenmodellierer |
---|---|
date | Sun, 28 Apr 2019 10:06:27 +0200 |
parents | 7801c5d8a562 |
children |
line wrap: on
line source
/** ****************************************************************************** * @file data_exchange_main.c * @author heinrichs weikamp gmbh * @date 13-Oct-2014 * @version V0.0.2 * @since 27-May-2015 * @brief Communication with the second CPU == RTE system * @verbatim ============================================================================== ##### How to use ##### ============================================================================== ============================================================================== ##### Device Data ##### ============================================================================== main CPU always sends the device data info that it has at the moment on start it is INT32_MIN, INT32_MAX and 0 as initialized in data_central.c variable declaration second small CPU gets request to send its device data on receiption the data is merged with the data in externLogbookFlash, stored on the externLogbookFlash and from now on send to small CPU @endverbatim ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2014 heinrichs weikamp</center></h2> * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include <string.h> // for memcopy #include "stm32f4xx_hal.h" #include "stdio.h" #include "ostc.h" #include "data_central.h" #include "data_exchange_main.h" #include "base.h" #include "externLogbookFlash.h" /* Expoted variables --------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ SDataReceiveFromMaster dataOut; SDataExchangeSlaveToMaster dataIn; uint8_t data_old__lost_connection_to_slave_counter_temp = 0; /* Private types -------------------------------------------------------------*/ uint8_t DataEX_check_header_and_footer_ok(void); void DataEX_control_connection_while_asking_for_sleep(void); /* Exported functions --------------------------------------------------------*/ uint8_t DataEX_call(void) { DataEX_control_connection_while_asking_for_sleep(); for(int i=0;i<EXCHANGE_BUFFERSIZE;i++) *(uint8_t *)(((uint32_t)&dataOut) + i) = 0; dataOut.mode = MODE_SHUTDOWN; dataOut.header.checkCode[0] = 0xBB; dataOut.header.checkCode[1] = 0x01; dataOut.header.checkCode[2] = 0x01; dataOut.header.checkCode[3] = 0xBB; dataOut.footer.checkCode[0] = 0xF4; dataOut.footer.checkCode[1] = 0xF3; dataOut.footer.checkCode[2] = 0xF2; dataOut.footer.checkCode[3] = 0xF1; HAL_GPIO_WritePin(SMALLCPU_CSB_GPIO_PORT,SMALLCPU_CSB_PIN,GPIO_PIN_SET); delayMicros(10); if(data_old__lost_connection_to_slave_counter_temp >= 3) { data_old__lost_connection_to_slave_counter_temp = 0; } else { HAL_GPIO_WritePin(SMALLCPU_CSB_GPIO_PORT,SMALLCPU_CSB_PIN,GPIO_PIN_RESET); } HAL_SPI_TransmitReceive_DMA(&cpu2DmaSpi, (uint8_t *)&dataOut, (uint8_t *)&dataIn, EXCHANGE_BUFFERSIZE+1); return 1; } void DataEX_control_connection_while_asking_for_sleep(void) { if(!DataEX_check_header_and_footer_ok()) { data_old__lost_connection_to_slave_counter_temp += 1; } } uint8_t DataEX_check_header_and_footer_ok(void) { if(dataIn.header.checkCode[0] != 0xA1) return 0; if(dataIn.header.checkCode[1] != 0xA2) return 0; if(dataIn.header.checkCode[2] != 0xA3) return 0; if(dataIn.header.checkCode[3] != 0xA4) return 0; if(dataIn.footer.checkCode[0] != 0xE1) return 0; if(dataIn.footer.checkCode[1] != 0xE2) return 0; if(dataIn.footer.checkCode[2] != 0xE3) return 0; if(dataIn.footer.checkCode[3] != 0xE4) return 0; return 1; }