view Small_CPU/Src/tm_stm32f4_otp.c @ 701:8c48553a0176

Bugfix display of deactivated sensors: In the previous version disabled sensors had been show after startup. Rootcause was that the deactivation state was taken from the divesettings instead of the common setting. After startup divesettings are not initialized and therefore all three sensors were displayed even if one or more were disabled. This has been fixed by using the common settings in case that the OSTC is not in divemode.
author Ideenmodellierer
date Fri, 28 Oct 2022 19:39:20 +0200
parents 5f11787b4f42
children
line wrap: on
line source

/**	
 * |----------------------------------------------------------------------
 * | Copyright (C) Tilen Majerle, 2014
 * | 
 * | This program is free software: you can redistribute it and/or modify
 * | it under the terms of the GNU General Public License as published by
 * | the Free Software Foundation, either version 3 of the License, or
 * | any later version.
 * |  
 * | This program is distributed in the hope that it will be useful,
 * | but WITHOUT ANY WARRANTY; without even the implied warranty of
 * | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * | GNU General Public License for more details.
 * | 
 * | You should have received a copy of the GNU General Public License
 * | along with this program.  If not, see <http://www.gnu.org/licenses/>.
 * |----------------------------------------------------------------------
 */
#include "tm_stm32f4_otp.h"

HAL_StatusTypeDef TM_OTP_Write(uint8_t block, uint8_t byte, uint8_t data)
{
	HAL_StatusTypeDef answer;

	/* Check input parameters */
	if (
		block >= OTP_BLOCKS ||
		byte >= OTP_BYTES_IN_BLOCK
	) {
		/* Invalid parameters */
		return HAL_ERROR;
	}

	if(*(uint8_t *)(OTP_START_ADDR + block * OTP_BYTES_IN_BLOCK + byte) != 0xFF)
		return HAL_ERROR;	

	/* Unlock FLASH */
	HAL_FLASH_Unlock();

	answer = HAL_FLASH_Program(FLASH_TYPEPROGRAM_BYTE, (OTP_START_ADDR + block * OTP_BYTES_IN_BLOCK + byte), data);

	/* Lock FLASH */
	HAL_FLASH_Lock();

	return answer;
}


uint8_t TM_OTP_Read(uint8_t block, uint8_t byte) {
	uint8_t data;
	
	/* Check input parameters */
	if (
		block >= OTP_BLOCKS ||
		byte >= OTP_BYTES_IN_BLOCK
	) {
		/* Invalid parameters */
		return HAL_ERROR;
	}
	
	/* Get value */
	data = *(__IO uint8_t *)(OTP_START_ADDR + block * OTP_BYTES_IN_BLOCK + byte);
	
	/* Return data */
	return data;
}