Mercurial > public > ostc4

view Documentations/dump-disc.cfg @ 1014:8c0134a287da GasConsumption

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Add a log data event to the scrubber timer at the start of the dive and every time the timer (in minutes) is decremented. The event contains a 12 bit signed integer for the remaining scrubber duration, and two flags for scrubber warning (0x2000, <= 30 minutes remaining) and scrubber error (0x4000, <= 0 minutes remaining). (mikeller)
author heinrichsweikamp
date Sun, 11 May 2025 16:18:20 +0200
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f427IIT6
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

puts "Flash banks:"
flash banks

#puts "Reading FIRMWARE..."
# Requires OpenOCD 0.10.0 / released January 2017 ?
#flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000

#puts "Done."
exit