Mercurial > public > ostc4

view Documentations/dump-disc.cfg @ 1072:8b97003dbb60 Icon_Integration

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Improve CO2 calibration: The most common calibration environment for diving is fresh air => ~400ppm co2. Some sensors do not have this setting as default => Calibration to 0ppm. To make sure that a proper calibration reference is set the common used value of 400ppm is not set before starting the calibration. For implementation new states were added to the co2 protocol state maschine. In addition the rx processor is now able to handle two responds parameters.
author Ideenmodellierer
date Thu, 19 Feb 2026 21:37:34 +0100
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f427IIT6
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

puts "Flash banks:"
flash banks

#puts "Reading FIRMWARE..."
# Requires OpenOCD 0.10.0 / released January 2017 ?
#flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000

#puts "Done."
exit