Mercurial > public > ostc4
view Small_CPU/Inc/tm_stm32f4_otp.h @ 250:822416168585 bm-2
Buelmann: new implementation for ceiling
Since my first functional fix in the ceiling computation in
commit ceecabfddb57, I noticed that the computation used a
linear search, that became rather computational expensive after
that commit. The simple question is: why not a binary search?
So, this commit implements the binary search. But there is a long
story attached to this. Comparing ceiling results from hwOS and this
OSTC4 code were very different. Basically, the original OSTC4
algorithm computed the ceiling using the same GFlow to GFhigh
slope, in such a way, that the ceiling was in sync with the
presented deco stops, where the hwOS code presents a GFhigh
based ceiling.
This said, it is more logical when the OSTC4 and hwOS code give
similar results. This new recursive algorithm gives very similar
results for the ceiling compared to hwOS.
To be complete here, the Buelmann ceiling is the depth to which
you can ascend, so that the leading tissue reaches GFhigh. This
also explains why the deepest deco stop is normally deeper than
the ceiling (unless one dives with GF like 80/80).
The code implemented here is rather straightforward recursion.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
author | Jan Mulder <jlmulder@xs4all.nl> |
---|---|
date | Thu, 11 Apr 2019 17:48:48 +0200 |
parents | 5f11787b4f42 |
children |
line wrap: on
line source
/** * @author Tilen Majerle * @email tilen@majerle.eu * @website http://stm32f4-discovery.com * @link http://stm32f4-discovery.com/2015/01/library-49-one-time-programmable-otp-bytes-on-stm32f4xx * @version v1.0 * @ide Keil uVision * @license GNU GPL v3 * @brief OTP (One-Time Programmable) flash section library for STM32F4xx * @verbatim ---------------------------------------------------------------------- Copyright (C) Tilen Majerle, 2015 This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. ---------------------------------------------------------------------- @endverbatim */ #ifndef TM_STM32F4_OPT_H #define TM_STM32F4_OPT_H /* C++ detection */ #ifdef __cplusplus extern "C" { #endif /** * @addtogroup TM_STM32F4xx_Libraries * @{ */ /** * @defgroup TM_OTP * @brief OTP (One-Time Programmable) flash section library for STM32F4xx - http://stm32f4-discovery.com/2015/01/library-49-one-time-programmable-otp-bytes-on-stm32f4xx * @{ * * \par Changelog * @verbatim Version 1.0 - First release @endverbatim * * \par Dependencies * @verbatim - STM32F4xx - STM32F4xx RCC - STM32F4xx FLASH - defines.h @endverbatim */ //#include "stm32f4xx.h" //#include "stm32f4xx_rcc.h" //#include "stm32f4xx_flash.h" //#include "defines.h" #include "stm32f4xx_hal.h" /** * @defgroup TM_OTP_Macros * @brief Library defines * @{ */ /** * @brief OTP memory start address */ #define OTP_START_ADDR (0x1FFF7800) /** * @brief OTP memory lock address */ #define OTP_LOCK_ADDR (0x1FFF7A00) /** * @brief Number of OTP blocks */ #define OTP_BLOCKS 16 /** * @brief Number of bytes in one block */ #define OTP_BYTES_IN_BLOCK 32 /** * @brief Number of all OTP bytes */ #define OTP_SIZE (OTP_BLOCKS * OTP_BYTES_IN_BLOCK) /** * @} */ /** * @defgroup TM_OTP_Functions * @brief Library Functions * @{ */ /** * @brief Writes one-time data to specific block and specific byte in this block * @note You can only ONCE write data at desired byte in specific block, if you will try to do it more times, you can have broken data at this location. * @param block: OTP block number, 0 to 15 is allowed * @param byte: OTP byte inside one block, 0 to 31 is allowed * @param data: Data to be written to OTP memory * @retval Member of @ref TM_OTP_Result_t enumeration */ HAL_StatusTypeDef TM_OTP_Write(uint8_t block, uint8_t byte, uint8_t data); /** * @brief Reads data from specific block and specific byte in this block * @note You can read data unlimited times from locations * @param block: OTP block number, 0 to 15 is allowed * @param byte: OTP byte inside one block, 0 to 31 is allowed * @retval Value at specific block and byte location, or 0 if location is invalid */ uint8_t TM_OTP_Read(uint8_t block, uint8_t byte); /** * @} */ /** * @} */ /** * @} */ /* C++ detection */ #ifdef __cplusplus } #endif #endif // TM_STM32F4_OPT_H