view Discovery/Src/t5_gauge.c @ 250:822416168585 bm-2

Buelmann: new implementation for ceiling Since my first functional fix in the ceiling computation in commit ceecabfddb57, I noticed that the computation used a linear search, that became rather computational expensive after that commit. The simple question is: why not a binary search? So, this commit implements the binary search. But there is a long story attached to this. Comparing ceiling results from hwOS and this OSTC4 code were very different. Basically, the original OSTC4 algorithm computed the ceiling using the same GFlow to GFhigh slope, in such a way, that the ceiling was in sync with the presented deco stops, where the hwOS code presents a GFhigh based ceiling. This said, it is more logical when the OSTC4 and hwOS code give similar results. This new recursive algorithm gives very similar results for the ceiling compared to hwOS. To be complete here, the Buelmann ceiling is the depth to which you can ascend, so that the leading tissue reaches GFhigh. This also explains why the deepest deco stop is normally deeper than the ceiling (unless one dives with GF like 80/80). The code implemented here is rather straightforward recursion. Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
author Jan Mulder <jlmulder@xs4all.nl>
date Thu, 11 Apr 2019 17:48:48 +0200
parents 9da7dd50e2ec
children 39c147e47c1c
line wrap: on
line source

///////////////////////////////////////////////////////////////////////////////
/// -*- coding: UTF-8 -*-
///
/// \file   Discovery/Src/t5_gauge.c
/// \brief  dive screen for Gauge mode
/// \author Heinrichs Weikamp gmbh
/// \date   1-Feb-2017
///
/// \details
///
/// $Id$
///////////////////////////////////////////////////////////////////////////////
/// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh
///
///     This program is free software: you can redistribute it and/or modify
///     it under the terms of the GNU General Public License as published by
///     the Free Software Foundation, either version 3 of the License, or
///     (at your option) any later version.
///
///     This program is distributed in the hope that it will be useful,
///     but WITHOUT ANY WARRANTY; without even the implied warranty of
///     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
///     GNU General Public License for more details.
///
///     You should have received a copy of the GNU General Public License
///     along with this program.  If not, see <http://www.gnu.org/licenses/>.
//////////////////////////////////////////////////////////////////////////////

/* Includes ------------------------------------------------------------------*/
#include "t5_gauge.h"

#include "data_exchange_main.h"
#include "decom.h"
#include "gfx_fonts.h"
#include "math.h"
#include "tHome.h"
#include "simulation.h"
#include "timer.h"
#include "unit.h"


/* Private variables ---------------------------------------------------------*/
GFX_DrawCfgScreen	t5screen;
GFX_DrawCfgWindow	t5l1;
GFX_DrawCfgWindow	t5r1;
GFX_DrawCfgWindow	t5c1;
GFX_DrawCfgWindow	t5c2;
GFX_DrawCfgWindow	t5c3; // for menu text

uint8_t t5_selection_customview = 0;

/* Importend function prototypes ---------------------------------------------*/
//extern uint8_t write_gas(char *text, uint8_t oxygen, uint8_t helium);

/* Private types -------------------------------------------------------------*/

#define CUSTOMBOX_LINE_LEFT (250)
#define CUSTOMBOX_LINE_RIGHT (549)
#define CUSTOMBOX_INSIDE_OFFSET (2)
#define CUSTOMBOX_OUTSIDE_OFFSET (2)

#define TEXTSIZE 16

const uint8_t t5_customviewsStandard[] =
{
    CVIEW_sensors,
    CVIEW_Compass,
    CVIEW_T3_MaxDepth,
    CVIEW_T3_StopWatch,
    CVIEW_T3_Temperature,
    CVIEW_T3_GasList,
    CVIEW_T3_Decostop,
    CVIEW_T3_END
};


const uint8_t *t5_customviews = t5_customviewsStandard;

/* Private function prototypes -----------------------------------------------*/
void t5_refresh_divemode(void);
void t5_refresh_customview(float depth);

uint8_t t5_test_customview_warnings(void);
//void t5_show_customview_warnings(void);
//void t5_compass(uint16_t ActualHeading, uint16_t UserSetHeading);

/* Exported functions --------------------------------------------------------*/

// for tHomeDiveMenuControl() in tHome.c
uint8_t t5_getCustomView(void)
{
    return t5_selection_customview;
}


void t5_init(void)
{
    t5_selection_customview = t5_customviewsStandard[0];

    t5screen.FBStartAdress = 0;
    t5screen.ImageHeight = 480;
    t5screen.ImageWidth = 800;
    t5screen.LayerIndex = 1;

    t5l1.Image = &t5screen;
    t5l1.WindowNumberOfTextLines = 2;
    t5l1.WindowLineSpacing = 19; // Abstand von Y0
    t5l1.WindowTab = 100;
    t5l1.WindowX0 = 0;
    t5l1.WindowX1 = BigFontSeperationLeftRight - 5;
    t5l1.WindowY0 = BigFontSeperationTopBottom + 5;
    t5l1.WindowY1 = 479;

    t5r1.Image = &t5screen;
    t5r1.WindowNumberOfTextLines = t5l1.WindowNumberOfTextLines;
    t5r1.WindowLineSpacing = t5l1.WindowLineSpacing;
    t5r1.WindowTab = t5l1.WindowTab;
    t5r1.WindowX0 = BigFontSeperationLeftRight + 5;
    t5r1.WindowX1 = 799;
    t5r1.WindowY0 = t5l1.WindowY0;
    t5r1.WindowY1 = t5l1.WindowY1;

    t5c1.Image = &t5screen;
    t5c1.WindowNumberOfTextLines = 2;
    t5c1.WindowLineSpacing = t5l1.WindowLineSpacing;
    t5c1.WindowX0 = 0;
    t5c1.WindowX1 = 799;
    t5c1.WindowY0 = 0;
    t5c1.WindowY1 = BigFontSeperationTopBottom - 5;

    t5c2.Image = &t5screen;
    t5c2.WindowNumberOfTextLines = 3;
    t5c2.WindowLineSpacing = 58;
    t5c2.WindowX0 = 370;
    t5c2.WindowX1 = 799;
    t5c2.WindowY0 = 0;
    t5c2.WindowY1 = BigFontSeperationTopBottom - 5;
    t5c2.WindowTab = 600;

    t5c3.Image = &t5screen;
    t5c3.WindowNumberOfTextLines = 1;
    t5c3.WindowLineSpacing = 0; // Abstand von Y0
    t5c3.WindowTab = 100;
    t5c3.WindowX0 = CUSTOMBOX_LINE_LEFT + CUSTOMBOX_INSIDE_OFFSET;
    t5c3.WindowX1 = CUSTOMBOX_LINE_RIGHT - CUSTOMBOX_INSIDE_OFFSET;
    t5c3.WindowY0 = 0;
    t5c3.WindowY1 = 69;
}


void t5_refresh(void)
{
    static uint8_t last_mode = MODE_SURFACE;

    SStateList status;
    get_globalStateList(&status);

    if(stateUsed->mode != MODE_DIVE)
    {
        last_mode = MODE_SURFACE;
        settingsGetPointer()->design = 7;
        if(t5screen.FBStartAdress)
        {
            releaseFrame(24,t5screen.FBStartAdress);
            t5screen.FBStartAdress = 0;
        }
        return;
    }

    if(status.base != BaseHome)
        return;

    t5screen.FBStartAdress = getFrame(24);

    if(last_mode != MODE_DIVE)
    {
        last_mode = MODE_DIVE;
        t5_selection_customview = *t5_customviews;
    }

    if(status.page == PageSurface)
        set_globalState(StD);

    t5_refresh_divemode();
    GFX_SetFramesTopBottom(t5screen.FBStartAdress, 0,480);
    releaseAllFramesExcept(24,t5screen.FBStartAdress);
}


/* Private functions ---------------------------------------------------------*/

void t5_refresh_divemode(void)
{
    char text[512];
    uint8_t  customview_warnings = 0;
    float depth_meter = 0.0;

    // everything like lines, depth, ascent graph and divetime
    depth_meter = t3_basics_lines_depth_and_divetime(&t5screen, &t5l1, &t5r1, DIVEMODE_Gauge);

    // customview
    if(stateUsed->warnings.numWarnings)
        customview_warnings = t5_test_customview_warnings();

    if(customview_warnings && warning_count_high_time)
        t3_basics_show_customview_warnings(&t5c1);
    else
        t5_refresh_customview(depth_meter);

    if(stateUsed->warnings.lowBattery)
        t3_basics_battery_low_customview_extra(&t5c1);


    /* Menu Selection (and gas mix) */
    if(get_globalState() == StDBEAR)
    {
        snprintf(text,TEXTSIZE,"\a\001%c%c", TXT_2BYTE, TXT2BYTE_DiveBearingQ);
        GFX_write_string_color(&FontT48,&t5c3,text,0,CLUT_WarningYellow);
    }
    else
    if(get_globalState() == StDRAVG)
    {
        snprintf(text,TEXTSIZE,"\a\001%c%c", TXT_2BYTE, TXT2BYTE_DiveResetAvgQ);
        GFX_write_string_color(&FontT48,&t5c3,text,0,CLUT_WarningYellow);
    }
//	else
//	if(get_globalState() == StDMENU)
//	{
//		snprintf(text,TEXTSIZE,"\a\001%c%c", TXT_2BYTE, TXT2BYTE_DiveMenuQ);
//		GFX_write_string_color(&FontT48,&t5c3,text,0,CLUT_WarningYellow);
//	}
    else
    if(get_globalState() == StDSIM1)
    {
        snprintf(text,TEXTSIZE,"\a\001%c%c", TXT_2BYTE, TXT2BYTE_DiveQuitQ);
        GFX_write_string_color(&FontT48,&t5c3,text,0,CLUT_WarningYellow);
    }
    else
    if(get_globalState() == StDSIM2)
    {
        if(settingsGetPointer()->nonMetricalSystem)
            snprintf(text,TEXTSIZE,"\a\001" " Sim:-3.33ft ");
        else
            snprintf(text,TEXTSIZE,"\a\001" " Sim:-1m ");
        GFX_write_string_color(&FontT48,&t5c3,text,0,CLUT_WarningYellow);
        snprintf(text,TEXTSIZE,"\a\f %u %c%c"
            , unit_depth_integer(simulation_get_aim_depth())
            , unit_depth_char1()
            , unit_depth_char2()
            );
        GFX_write_string_color(&FontT42,&t5l1,text,0,CLUT_WarningYellow);

    }
    else
    if(get_globalState() == StDSIM3)
    {
        if(settingsGetPointer()->nonMetricalSystem)
            snprintf(text,TEXTSIZE,"\a\001" " Sim:+3.33ft ");
        else
            snprintf(text,TEXTSIZE,"\a\001" " Sim:+1m ");
        GFX_write_string_color(&FontT48,&t5c3,text,0,CLUT_WarningYellow);
        snprintf(text,TEXTSIZE,"\a\f %u %c%c"
            , unit_depth_integer(simulation_get_aim_depth())
            , unit_depth_char1()
            , unit_depth_char2()
            );
        GFX_write_string_color(&FontT42,&t5l1,text,0,CLUT_WarningYellow);
    }
    else
    if(get_globalState() == StDSIM4)
    {
        snprintf(text,TEXTSIZE,"\a\001" " Sim:+5' ");
        GFX_write_string_color(&FontT48,&t5c3,text,0,CLUT_WarningYellow);
        snprintf(text,TEXTSIZE,"\a\f %u %c%c"
            , unit_depth_integer(simulation_get_aim_depth())
            , unit_depth_char1()
            , unit_depth_char2()
            );
        GFX_write_string_color(&FontT42,&t5l1,text,0,CLUT_WarningYellow);
    }
    else
    {
        // keep empty
    }
}


void t5_change_customview(void)
{
    t3_basics_change_customview(&t5_selection_customview, t5_customviews);
}


void t5_refresh_customview(float depth)
{
    if((t5_selection_customview == CVIEW_sensors) &&(stateUsed->diveSettings.ccrOption == 0))
        t5_change_customview();

    t3_basics_refresh_customview(depth, t5_selection_customview, &t5screen, &t5c1, &t5c2, DIVEMODE_Gauge);
}


uint8_t t5_test_customview_warnings(void)
{
    uint8_t count = 0;

    count = 0;
    return count;
}