/**+
−
  ******************************************************************************+
−
  * @file    uartProtocol_O2.h+
−
  * @author  heinrichs weikamp gmbh+
−
  * @version V0.0.1+
−
  * @date    18-Jun-2023+
−
  * @brief	 Interface functionality to handle external, UART based O2 sensors+
−
  *+
−
  @verbatim+
−
  ==============================================================================+
−
                        ##### How to use #####+
−
  ==============================================================================+
−
  @endverbatim+
−
  ******************************************************************************+
−
  * @attention+
−
  *+
−
  * <h2><center>&copy; COPYRIGHT(c) 2014 heinrichs weikamp</center></h2>+
−
  *+
−
  ******************************************************************************+
−
  */+
−
+
−
/* Define to prevent recursive inclusion -------------------------------------*/+
−
#ifndef UART_PROTOCOL_O2_H+
−
#define UART_PROTOCOL_O2_H+
−
+
−
#ifdef __cplusplus+
−
 extern "C" {+
−
#endif+
−
+
−
/* Includes ------------------------------------------------------------------*/+
−
#include "configuration.h"+
−
#include "stm32f4xx_hal.h"+
−
+
−
 typedef enum+
−
 {+
−
 	UART_COMMON_INIT = 0,	/* Default Status for every sensor type */+
−
	UART_COMMON_IDLE,		/* sensor detected and no communication pending */+
−
	UART_COMMON_ERROR,		/* Error message received from sensor */+
−
 } uartCommonStatus_t;+
−
+
−
 typedef enum+
−
 {+
−
	UART_O2_INIT = UART_COMMON_INIT,		/* Default Status for every sensor type */+
−
	UART_O2_IDLE = UART_COMMON_IDLE,		/* sensor detected and no communication pending */+
−
	UART_O2_ERROR = UART_COMMON_ERROR,		/* Error message received from sensor */+
−
 	UART_O2_CHECK,							/* send blink command and check if sensor answers */+
−
 	UART_O2_REQ_INFO,						/* request information about available internal sensors of sensor */+
−
	UART_O2_REQ_ID,							/* request ID of sensor */+
−
 	UART_O2_REQ_O2,							/* O2 value has been requested and is in receiption progress */+
−
	UART_O2_REQ_RAW,						/* Request O2 and extended raw data */+
−
 } uartO2Status_t;+
−
+
−
+
−
 typedef enum+
−
  {+
−
	O2RX_IDLE = 0,			/* no reception pending */+
−
	O2RX_CONFIRM,			/* check the command echo */+
−
	O2RX_GETNR,				/* extract the sensor number */+
−
	O2RX_GETO2,				/* extract the ppo2 */+
−
	O2RX_GETTEMP,			/* extract the temperature */+
−
	O2RX_GETSTATUS,			/* extract the sensor status */+
−
	O2RX_GETTYPE,			/* extract the sensor type (should be 8) */+
−
	O2RX_GETCHANNEL,		/* extract the number of sensor channels (should be 1) */+
−
	O2RX_GETVERSION,		/* extract the sensor version */+
−
	O2RX_GETSUBSENSORS,		/* extract the available measures (O2, temperature, humidity etc) */+
−
	O2RX_GETDPHI,			/* extract phase shift */+
−
	O2RX_INTENSITY,			/* extract intensity of signal */+
−
	O2RX_AMBIENTLIGHT,		/* extract the intensity of the ambient light */+
−
	O2RX_PRESSURE,			/* extract pressure within the sensor housing */+
−
	O2RX_HUMIDITY			/* extract humidity within the sensor housing */+
−
  } uartO2RxState_t;+
−
+
−
void uartO2_Control(void);+
−
void uartO2_ProcessData(uint8_t data);+
−
void uartO2_SetChannel(uint8_t channel);+
−
uint8_t uartO2_isSensorConnected();+
−
+
−
+
−
+
−
+
−
#endif /* EXTERNAL_INTERFACE_H */+
−