Mercurial > public > ostc4
view Common/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dma2d.h @ 946:80ae8ea7f0a0 Evo_2_23
GNSS set to full power at startup:
In case of an reset the module would continue in sleep mode if it was in this state. To avoid this the module will now always set to full power at startup of the RTE.
author | Ideenmodellierer |
---|---|
date | Sun, 22 Dec 2024 20:52:08 +0100 |
parents | c78bcbd5deda |
children |
line wrap: on
line source
/** ****************************************************************************** * @file stm32f4xx_ll_dma2d.h * @author MCD Application Team * @brief Header file of DMA2D LL module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_LL_DMA2D_H #define __STM32F4xx_LL_DMA2D_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx.h" /** @addtogroup STM32F4xx_LL_Driver * @{ */ #if defined (DMA2D) /** @defgroup DMA2D_LL DMA2D * @{ */ /* Private types -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private constants ---------------------------------------------------------*/ /* Private macros ------------------------------------------------------------*/ #if defined(USE_FULL_LL_DRIVER) /** @defgroup DMA2D_LL_Private_Macros DMA2D Private Macros * @{ */ /** * @} */ #endif /*USE_FULL_LL_DRIVER*/ /* Exported types ------------------------------------------------------------*/ #if defined(USE_FULL_LL_DRIVER) /** @defgroup DMA2D_LL_ES_Init_Struct DMA2D Exported Init structures * @{ */ /** * @brief LL DMA2D Init Structure Definition */ typedef struct { uint32_t Mode; /*!< Specifies the DMA2D transfer mode. - This parameter can be one value of @ref DMA2D_LL_EC_MODE. This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetMode().*/ uint32_t ColorMode; /*!< Specifies the color format of the output image. - This parameter can be one value of @ref DMA2D_LL_EC_OUTPUT_COLOR_MODE. This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColorMode(). */ uint32_t OutputBlue; /*!< Specifies the Blue value of the output image. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if RGB565 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration function @ref LL_DMA2D_ConfigOutputColor(). */ uint32_t OutputGreen; /*!< Specifies the Green value of the output image. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x3F if RGB565 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration function @ref LL_DMA2D_ConfigOutputColor(). */ uint32_t OutputRed; /*!< Specifies the Red value of the output image. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if RGB565 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration function @ref LL_DMA2D_ConfigOutputColor(). */ uint32_t OutputAlpha; /*!< Specifies the Alpha channel of the output image. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x01 if ARGB1555 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. - This parameter is not considered if RGB888 or RGB565 color mode is selected. This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration function @ref LL_DMA2D_ConfigOutputColor(). */ uint32_t OutputMemoryAddress; /*!< Specifies the memory address. - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFFFFFF. This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputMemAddr(). */ uint32_t LineOffset; /*!< Specifies the output line offset value. - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetLineOffset(). */ uint32_t NbrOfLines; /*!< Specifies the number of lines of the area to be transferred. - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetNbrOfLines(). */ uint32_t NbrOfPixelsPerLines; /*!< Specifies the number of pixels per lines of the area to be transfered. - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetNbrOfPixelsPerLines(). */ } LL_DMA2D_InitTypeDef; /** * @brief LL DMA2D Layer Configuration Structure Definition */ typedef struct { uint32_t MemoryAddress; /*!< Specifies the foreground or background memory address. - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFFFFFF. This parameter can be modified afterwards using unitary functions - @ref LL_DMA2D_FGND_SetMemAddr() for foreground layer, - @ref LL_DMA2D_BGND_SetMemAddr() for background layer. */ uint32_t LineOffset; /*!< Specifies the foreground or background line offset value. - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. This parameter can be modified afterwards using unitary functions - @ref LL_DMA2D_FGND_SetLineOffset() for foreground layer, - @ref LL_DMA2D_BGND_SetLineOffset() for background layer. */ uint32_t ColorMode; /*!< Specifies the foreground or background color mode. - This parameter can be one value of @ref DMA2D_LL_EC_INPUT_COLOR_MODE. This parameter can be modified afterwards using unitary functions - @ref LL_DMA2D_FGND_SetColorMode() for foreground layer, - @ref LL_DMA2D_BGND_SetColorMode() for background layer. */ uint32_t CLUTColorMode; /*!< Specifies the foreground or background CLUT color mode. - This parameter can be one value of @ref DMA2D_LL_EC_CLUT_COLOR_MODE. This parameter can be modified afterwards using unitary functions - @ref LL_DMA2D_FGND_SetCLUTColorMode() for foreground layer, - @ref LL_DMA2D_BGND_SetCLUTColorMode() for background layer. */ uint32_t CLUTSize; /*!< Specifies the foreground or background CLUT size. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. This parameter can be modified afterwards using unitary functions - @ref LL_DMA2D_FGND_SetCLUTSize() for foreground layer, - @ref LL_DMA2D_BGND_SetCLUTSize() for background layer. */ uint32_t AlphaMode; /*!< Specifies the foreground or background alpha mode. - This parameter can be one value of @ref DMA2D_LL_EC_ALPHA_MODE. This parameter can be modified afterwards using unitary functions - @ref LL_DMA2D_FGND_SetAlphaMode() for foreground layer, - @ref LL_DMA2D_BGND_SetAlphaMode() for background layer. */ uint32_t Alpha; /*!< Specifies the foreground or background Alpha value. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. This parameter can be modified afterwards using unitary functions - @ref LL_DMA2D_FGND_SetAlpha() for foreground layer, - @ref LL_DMA2D_BGND_SetAlpha() for background layer. */ uint32_t Blue; /*!< Specifies the foreground or background Blue color value. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. This parameter can be modified afterwards using unitary functions - @ref LL_DMA2D_FGND_SetBlueColor() for foreground layer, - @ref LL_DMA2D_BGND_SetBlueColor() for background layer. */ uint32_t Green; /*!< Specifies the foreground or background Green color value. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. This parameter can be modified afterwards using unitary functions - @ref LL_DMA2D_FGND_SetGreenColor() for foreground layer, - @ref LL_DMA2D_BGND_SetGreenColor() for background layer. */ uint32_t Red; /*!< Specifies the foreground or background Red color value. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. This parameter can be modified afterwards using unitary functions - @ref LL_DMA2D_FGND_SetRedColor() for foreground layer, - @ref LL_DMA2D_BGND_SetRedColor() for background layer. */ uint32_t CLUTMemoryAddress; /*!< Specifies the foreground or background CLUT memory address. - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFFFFFF. This parameter can be modified afterwards using unitary functions - @ref LL_DMA2D_FGND_SetCLUTMemAddr() for foreground layer, - @ref LL_DMA2D_BGND_SetCLUTMemAddr() for background layer. */ } LL_DMA2D_LayerCfgTypeDef; /** * @brief LL DMA2D Output Color Structure Definition */ typedef struct { uint32_t ColorMode; /*!< Specifies the color format of the output image. - This parameter can be one value of @ref DMA2D_LL_EC_OUTPUT_COLOR_MODE. This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColorMode(). */ uint32_t OutputBlue; /*!< Specifies the Blue value of the output image. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if RGB565 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration function @ref LL_DMA2D_ConfigOutputColor(). */ uint32_t OutputGreen; /*!< Specifies the Green value of the output image. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x3F if RGB565 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration function @ref LL_DMA2D_ConfigOutputColor(). */ uint32_t OutputRed; /*!< Specifies the Red value of the output image. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if RGB565 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration function @ref LL_DMA2D_ConfigOutputColor(). */ uint32_t OutputAlpha; /*!< Specifies the Alpha channel of the output image. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x01 if ARGB1555 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. - This parameter is not considered if RGB888 or RGB565 color mode is selected. This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration function @ref LL_DMA2D_ConfigOutputColor(). */ } LL_DMA2D_ColorTypeDef; /** * @} */ #endif /* USE_FULL_LL_DRIVER */ /* Exported constants --------------------------------------------------------*/ /** @defgroup DMA2D_LL_Exported_Constants DMA2D Exported Constants * @{ */ /** @defgroup DMA2D_LL_EC_GET_FLAG Get Flags Defines * @brief Flags defines which can be used with LL_DMA2D_ReadReg function * @{ */ #define LL_DMA2D_FLAG_CEIF DMA2D_ISR_CEIF /*!< Configuration Error Interrupt Flag */ #define LL_DMA2D_FLAG_CTCIF DMA2D_ISR_CTCIF /*!< CLUT Transfer Complete Interrupt Flag */ #define LL_DMA2D_FLAG_CAEIF DMA2D_ISR_CAEIF /*!< CLUT Access Error Interrupt Flag */ #define LL_DMA2D_FLAG_TWIF DMA2D_ISR_TWIF /*!< Transfer Watermark Interrupt Flag */ #define LL_DMA2D_FLAG_TCIF DMA2D_ISR_TCIF /*!< Transfer Complete Interrupt Flag */ #define LL_DMA2D_FLAG_TEIF DMA2D_ISR_TEIF /*!< Transfer Error Interrupt Flag */ /** * @} */ /** @defgroup DMA2D_LL_EC_IT IT Defines * @brief IT defines which can be used with LL_DMA2D_ReadReg and LL_DMA2D_WriteReg functions * @{ */ #define LL_DMA2D_IT_CEIE DMA2D_CR_CEIE /*!< Configuration Error Interrupt */ #define LL_DMA2D_IT_CTCIE DMA2D_CR_CTCIE /*!< CLUT Transfer Complete Interrupt */ #define LL_DMA2D_IT_CAEIE DMA2D_CR_CAEIE /*!< CLUT Access Error Interrupt */ #define LL_DMA2D_IT_TWIE DMA2D_CR_TWIE /*!< Transfer Watermark Interrupt */ #define LL_DMA2D_IT_TCIE DMA2D_CR_TCIE /*!< Transfer Complete Interrupt */ #define LL_DMA2D_IT_TEIE DMA2D_CR_TEIE /*!< Transfer Error Interrupt */ /** * @} */ /** @defgroup DMA2D_LL_EC_MODE Mode * @{ */ #define LL_DMA2D_MODE_M2M 0x00000000U /*!< DMA2D memory to memory transfer mode */ #define LL_DMA2D_MODE_M2M_PFC DMA2D_CR_MODE_0 /*!< DMA2D memory to memory with pixel format conversion transfer mode */ #define LL_DMA2D_MODE_M2M_BLEND DMA2D_CR_MODE_1 /*!< DMA2D memory to memory with blending transfer mode */ #define LL_DMA2D_MODE_R2M DMA2D_CR_MODE /*!< DMA2D register to memory transfer mode */ /** * @} */ /** @defgroup DMA2D_LL_EC_OUTPUT_COLOR_MODE Output Color Mode * @{ */ #define LL_DMA2D_OUTPUT_MODE_ARGB8888 0x00000000U /*!< ARGB8888 */ #define LL_DMA2D_OUTPUT_MODE_RGB888 DMA2D_OPFCCR_CM_0 /*!< RGB888 */ #define LL_DMA2D_OUTPUT_MODE_RGB565 DMA2D_OPFCCR_CM_1 /*!< RGB565 */ #define LL_DMA2D_OUTPUT_MODE_ARGB1555 (DMA2D_OPFCCR_CM_0|DMA2D_OPFCCR_CM_1) /*!< ARGB1555 */ #define LL_DMA2D_OUTPUT_MODE_ARGB4444 DMA2D_OPFCCR_CM_2 /*!< ARGB4444 */ /** * @} */ /** @defgroup DMA2D_LL_EC_INPUT_COLOR_MODE Input Color Mode * @{ */ #define LL_DMA2D_INPUT_MODE_ARGB8888 0x00000000U /*!< ARGB8888 */ #define LL_DMA2D_INPUT_MODE_RGB888 DMA2D_FGPFCCR_CM_0 /*!< RGB888 */ #define LL_DMA2D_INPUT_MODE_RGB565 DMA2D_FGPFCCR_CM_1 /*!< RGB565 */ #define LL_DMA2D_INPUT_MODE_ARGB1555 (DMA2D_FGPFCCR_CM_0|DMA2D_FGPFCCR_CM_1) /*!< ARGB1555 */ #define LL_DMA2D_INPUT_MODE_ARGB4444 DMA2D_FGPFCCR_CM_2 /*!< ARGB4444 */ #define LL_DMA2D_INPUT_MODE_L8 (DMA2D_FGPFCCR_CM_0|DMA2D_FGPFCCR_CM_2) /*!< L8 */ #define LL_DMA2D_INPUT_MODE_AL44 (DMA2D_FGPFCCR_CM_1|DMA2D_FGPFCCR_CM_2) /*!< AL44 */ #define LL_DMA2D_INPUT_MODE_AL88 (DMA2D_FGPFCCR_CM_0|DMA2D_FGPFCCR_CM_1|DMA2D_FGPFCCR_CM_2) /*!< AL88 */ #define LL_DMA2D_INPUT_MODE_L4 DMA2D_FGPFCCR_CM_3 /*!< L4 */ #define LL_DMA2D_INPUT_MODE_A8 (DMA2D_FGPFCCR_CM_0|DMA2D_FGPFCCR_CM_3) /*!< A8 */ #define LL_DMA2D_INPUT_MODE_A4 (DMA2D_FGPFCCR_CM_1|DMA2D_FGPFCCR_CM_3) /*!< A4 */ /** * @} */ /** @defgroup DMA2D_LL_EC_ALPHA_MODE Alpha Mode * @{ */ #define LL_DMA2D_ALPHA_MODE_NO_MODIF 0x00000000U /*!< No modification of the alpha channel value */ #define LL_DMA2D_ALPHA_MODE_REPLACE DMA2D_FGPFCCR_AM_0 /*!< Replace original alpha channel value by programmed alpha value */ #define LL_DMA2D_ALPHA_MODE_COMBINE DMA2D_FGPFCCR_AM_1 /*!< Replace original alpha channel value by programmed alpha value with original alpha channel value */ /** * @} */ /** @defgroup DMA2D_LL_EC_CLUT_COLOR_MODE CLUT Color Mode * @{ */ #define LL_DMA2D_CLUT_COLOR_MODE_ARGB8888 0x00000000U /*!< ARGB8888 */ #define LL_DMA2D_CLUT_COLOR_MODE_RGB888 DMA2D_FGPFCCR_CCM /*!< RGB888 */ /** * @} */ /** * @} */ /* Exported macro ------------------------------------------------------------*/ /** @defgroup DMA2D_LL_Exported_Macros DMA2D Exported Macros * @{ */ /** @defgroup DMA2D_LL_EM_WRITE_READ Common Write and read registers Macros * @{ */ /** * @brief Write a value in DMA2D register. * @param __INSTANCE__ DMA2D Instance * @param __REG__ Register to be written * @param __VALUE__ Value to be written in the register * @retval None */ #define LL_DMA2D_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) /** * @brief Read a value in DMA2D register. * @param __INSTANCE__ DMA2D Instance * @param __REG__ Register to be read * @retval Register value */ #define LL_DMA2D_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) /** * @} */ /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @defgroup DMA2D_LL_Exported_Functions DMA2D Exported Functions * @{ */ /** @defgroup DMA2D_LL_EF_Configuration Configuration Functions * @{ */ /** * @brief Start a DMA2D transfer. * @rmtoll CR START LL_DMA2D_Start * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_Start(DMA2D_TypeDef *DMA2Dx) { SET_BIT(DMA2Dx->CR, DMA2D_CR_START); } /** * @brief Indicate if a DMA2D transfer is ongoing. * @rmtoll CR START LL_DMA2D_IsTransferOngoing * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsTransferOngoing(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->CR, DMA2D_CR_START) == (DMA2D_CR_START)); } /** * @brief Suspend DMA2D transfer. * @note This API can be used to suspend automatic foreground or background CLUT loading. * @rmtoll CR SUSP LL_DMA2D_Suspend * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_Suspend(DMA2D_TypeDef *DMA2Dx) { MODIFY_REG(DMA2Dx->CR, DMA2D_CR_SUSP | DMA2D_CR_START, DMA2D_CR_SUSP); } /** * @brief Resume DMA2D transfer. * @note This API can be used to resume automatic foreground or background CLUT loading. * @rmtoll CR SUSP LL_DMA2D_Resume * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_Resume(DMA2D_TypeDef *DMA2Dx) { CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_SUSP | DMA2D_CR_START); } /** * @brief Indicate if DMA2D transfer is suspended. * @note This API can be used to indicate whether or not automatic foreground or * background CLUT loading is suspended. * @rmtoll CR SUSP LL_DMA2D_IsSuspended * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsSuspended(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->CR, DMA2D_CR_SUSP) == (DMA2D_CR_SUSP)); } /** * @brief Abort DMA2D transfer. * @note This API can be used to abort automatic foreground or background CLUT loading. * @rmtoll CR ABORT LL_DMA2D_Abort * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_Abort(DMA2D_TypeDef *DMA2Dx) { MODIFY_REG(DMA2Dx->CR, DMA2D_CR_ABORT | DMA2D_CR_START, DMA2D_CR_ABORT); } /** * @brief Indicate if DMA2D transfer is aborted. * @note This API can be used to indicate whether or not automatic foreground or * background CLUT loading is aborted. * @rmtoll CR ABORT LL_DMA2D_IsAborted * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsAborted(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->CR, DMA2D_CR_ABORT) == (DMA2D_CR_ABORT)); } /** * @brief Set DMA2D mode. * @rmtoll CR MODE LL_DMA2D_SetMode * @param DMA2Dx DMA2D Instance * @param Mode This parameter can be one of the following values: * @arg @ref LL_DMA2D_MODE_M2M * @arg @ref LL_DMA2D_MODE_M2M_PFC * @arg @ref LL_DMA2D_MODE_M2M_BLEND * @arg @ref LL_DMA2D_MODE_R2M * @retval None */ __STATIC_INLINE void LL_DMA2D_SetMode(DMA2D_TypeDef *DMA2Dx, uint32_t Mode) { MODIFY_REG(DMA2Dx->CR, DMA2D_CR_MODE, Mode); } /** * @brief Return DMA2D mode * @rmtoll CR MODE LL_DMA2D_GetMode * @param DMA2Dx DMA2D Instance * @retval Returned value can be one of the following values: * @arg @ref LL_DMA2D_MODE_M2M * @arg @ref LL_DMA2D_MODE_M2M_PFC * @arg @ref LL_DMA2D_MODE_M2M_BLEND * @arg @ref LL_DMA2D_MODE_R2M */ __STATIC_INLINE uint32_t LL_DMA2D_GetMode(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->CR, DMA2D_CR_MODE)); } /** * @brief Set DMA2D output color mode. * @rmtoll OPFCCR CM LL_DMA2D_SetOutputColorMode * @param DMA2Dx DMA2D Instance * @param ColorMode This parameter can be one of the following values: * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB8888 * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB888 * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB565 * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB1555 * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB4444 * @retval None */ __STATIC_INLINE void LL_DMA2D_SetOutputColorMode(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode) { MODIFY_REG(DMA2Dx->OPFCCR, DMA2D_OPFCCR_CM, ColorMode); } /** * @brief Return DMA2D output color mode. * @rmtoll OPFCCR CM LL_DMA2D_GetOutputColorMode * @param DMA2Dx DMA2D Instance * @retval Returned value can be one of the following values: * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB8888 * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB888 * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB565 * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB1555 * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB4444 */ __STATIC_INLINE uint32_t LL_DMA2D_GetOutputColorMode(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->OPFCCR, DMA2D_OPFCCR_CM)); } /** * @brief Set DMA2D line offset, expressed on 14 bits ([13:0] bits). * @rmtoll OOR LO LL_DMA2D_SetLineOffset * @param DMA2Dx DMA2D Instance * @param LineOffset Value between Min_Data=0 and Max_Data=0x3FFF * @retval None */ __STATIC_INLINE void LL_DMA2D_SetLineOffset(DMA2D_TypeDef *DMA2Dx, uint32_t LineOffset) { MODIFY_REG(DMA2Dx->OOR, DMA2D_OOR_LO, LineOffset); } /** * @brief Return DMA2D line offset, expressed on 14 bits ([13:0] bits). * @rmtoll OOR LO LL_DMA2D_GetLineOffset * @param DMA2Dx DMA2D Instance * @retval Line offset value between Min_Data=0 and Max_Data=0x3FFF */ __STATIC_INLINE uint32_t LL_DMA2D_GetLineOffset(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->OOR, DMA2D_OOR_LO)); } /** * @brief Set DMA2D number of pixels per lines, expressed on 14 bits ([13:0] bits). * @rmtoll NLR PL LL_DMA2D_SetNbrOfPixelsPerLines * @param DMA2Dx DMA2D Instance * @param NbrOfPixelsPerLines Value between Min_Data=0 and Max_Data=0x3FFF * @retval None */ __STATIC_INLINE void LL_DMA2D_SetNbrOfPixelsPerLines(DMA2D_TypeDef *DMA2Dx, uint32_t NbrOfPixelsPerLines) { MODIFY_REG(DMA2Dx->NLR, DMA2D_NLR_PL, (NbrOfPixelsPerLines << DMA2D_NLR_PL_Pos)); } /** * @brief Return DMA2D number of pixels per lines, expressed on 14 bits ([13:0] bits) * @rmtoll NLR PL LL_DMA2D_GetNbrOfPixelsPerLines * @param DMA2Dx DMA2D Instance * @retval Number of pixels per lines value between Min_Data=0 and Max_Data=0x3FFF */ __STATIC_INLINE uint32_t LL_DMA2D_GetNbrOfPixelsPerLines(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->NLR, DMA2D_NLR_PL) >> DMA2D_NLR_PL_Pos); } /** * @brief Set DMA2D number of lines, expressed on 16 bits ([15:0] bits). * @rmtoll NLR NL LL_DMA2D_SetNbrOfLines * @param DMA2Dx DMA2D Instance * @param NbrOfLines Value between Min_Data=0 and Max_Data=0xFFFF * @retval None */ __STATIC_INLINE void LL_DMA2D_SetNbrOfLines(DMA2D_TypeDef *DMA2Dx, uint32_t NbrOfLines) { MODIFY_REG(DMA2Dx->NLR, DMA2D_NLR_NL, NbrOfLines); } /** * @brief Return DMA2D number of lines, expressed on 16 bits ([15:0] bits). * @rmtoll NLR NL LL_DMA2D_GetNbrOfLines * @param DMA2Dx DMA2D Instance * @retval Number of lines value between Min_Data=0 and Max_Data=0xFFFF */ __STATIC_INLINE uint32_t LL_DMA2D_GetNbrOfLines(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->NLR, DMA2D_NLR_NL)); } /** * @brief Set DMA2D output memory address, expressed on 32 bits ([31:0] bits). * @rmtoll OMAR MA LL_DMA2D_SetOutputMemAddr * @param DMA2Dx DMA2D Instance * @param OutputMemoryAddress Value between Min_Data=0 and Max_Data=0xFFFFFFFF * @retval None */ __STATIC_INLINE void LL_DMA2D_SetOutputMemAddr(DMA2D_TypeDef *DMA2Dx, uint32_t OutputMemoryAddress) { LL_DMA2D_WriteReg(DMA2Dx, OMAR, OutputMemoryAddress); } /** * @brief Get DMA2D output memory address, expressed on 32 bits ([31:0] bits). * @rmtoll OMAR MA LL_DMA2D_GetOutputMemAddr * @param DMA2Dx DMA2D Instance * @retval Output memory address value between Min_Data=0 and Max_Data=0xFFFFFFFF */ __STATIC_INLINE uint32_t LL_DMA2D_GetOutputMemAddr(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(LL_DMA2D_ReadReg(DMA2Dx, OMAR)); } /** * @brief Set DMA2D output color, expressed on 32 bits ([31:0] bits). * @note Output color format depends on output color mode, ARGB8888, RGB888, * RGB565, ARGB1555 or ARGB4444. * @note LL_DMA2D_ConfigOutputColor() API may be used instead if colors values formatting * with respect to color mode is not done by the user code. * @rmtoll OCOLR BLUE LL_DMA2D_SetOutputColor\n * OCOLR GREEN LL_DMA2D_SetOutputColor\n * OCOLR RED LL_DMA2D_SetOutputColor\n * OCOLR ALPHA LL_DMA2D_SetOutputColor * @param DMA2Dx DMA2D Instance * @param OutputColor Value between Min_Data=0 and Max_Data=0xFFFFFFFF * @retval None */ __STATIC_INLINE void LL_DMA2D_SetOutputColor(DMA2D_TypeDef *DMA2Dx, uint32_t OutputColor) { MODIFY_REG(DMA2Dx->OCOLR, (DMA2D_OCOLR_BLUE_1 | DMA2D_OCOLR_GREEN_1 | DMA2D_OCOLR_RED_1 | DMA2D_OCOLR_ALPHA_1), \ OutputColor); } /** * @brief Get DMA2D output color, expressed on 32 bits ([31:0] bits). * @note Alpha channel and red, green, blue color values must be retrieved from the returned * value based on the output color mode (ARGB8888, RGB888, RGB565, ARGB1555 or ARGB4444) * as set by @ref LL_DMA2D_SetOutputColorMode. * @rmtoll OCOLR BLUE LL_DMA2D_GetOutputColor\n * OCOLR GREEN LL_DMA2D_GetOutputColor\n * OCOLR RED LL_DMA2D_GetOutputColor\n * OCOLR ALPHA LL_DMA2D_GetOutputColor * @param DMA2Dx DMA2D Instance * @retval Output color value between Min_Data=0 and Max_Data=0xFFFFFFFF */ __STATIC_INLINE uint32_t LL_DMA2D_GetOutputColor(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->OCOLR, \ (DMA2D_OCOLR_BLUE_1 | DMA2D_OCOLR_GREEN_1 | DMA2D_OCOLR_RED_1 | DMA2D_OCOLR_ALPHA_1))); } /** * @brief Set DMA2D line watermark, expressed on 16 bits ([15:0] bits). * @rmtoll LWR LW LL_DMA2D_SetLineWatermark * @param DMA2Dx DMA2D Instance * @param LineWatermark Value between Min_Data=0 and Max_Data=0xFFFF * @retval None */ __STATIC_INLINE void LL_DMA2D_SetLineWatermark(DMA2D_TypeDef *DMA2Dx, uint32_t LineWatermark) { MODIFY_REG(DMA2Dx->LWR, DMA2D_LWR_LW, LineWatermark); } /** * @brief Return DMA2D line watermark, expressed on 16 bits ([15:0] bits). * @rmtoll LWR LW LL_DMA2D_GetLineWatermark * @param DMA2Dx DMA2D Instance * @retval Line watermark value between Min_Data=0 and Max_Data=0xFFFF */ __STATIC_INLINE uint32_t LL_DMA2D_GetLineWatermark(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->LWR, DMA2D_LWR_LW)); } /** * @brief Set DMA2D dead time, expressed on 8 bits ([7:0] bits). * @rmtoll AMTCR DT LL_DMA2D_SetDeadTime * @param DMA2Dx DMA2D Instance * @param DeadTime Value between Min_Data=0 and Max_Data=0xFF * @retval None */ __STATIC_INLINE void LL_DMA2D_SetDeadTime(DMA2D_TypeDef *DMA2Dx, uint32_t DeadTime) { MODIFY_REG(DMA2Dx->AMTCR, DMA2D_AMTCR_DT, (DeadTime << DMA2D_AMTCR_DT_Pos)); } /** * @brief Return DMA2D dead time, expressed on 8 bits ([7:0] bits). * @rmtoll AMTCR DT LL_DMA2D_GetDeadTime * @param DMA2Dx DMA2D Instance * @retval Dead time value between Min_Data=0 and Max_Data=0xFF */ __STATIC_INLINE uint32_t LL_DMA2D_GetDeadTime(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->AMTCR, DMA2D_AMTCR_DT) >> DMA2D_AMTCR_DT_Pos); } /** * @brief Enable DMA2D dead time functionality. * @rmtoll AMTCR EN LL_DMA2D_EnableDeadTime * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_EnableDeadTime(DMA2D_TypeDef *DMA2Dx) { SET_BIT(DMA2Dx->AMTCR, DMA2D_AMTCR_EN); } /** * @brief Disable DMA2D dead time functionality. * @rmtoll AMTCR EN LL_DMA2D_DisableDeadTime * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_DisableDeadTime(DMA2D_TypeDef *DMA2Dx) { CLEAR_BIT(DMA2Dx->AMTCR, DMA2D_AMTCR_EN); } /** * @brief Indicate if DMA2D dead time functionality is enabled. * @rmtoll AMTCR EN LL_DMA2D_IsEnabledDeadTime * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsEnabledDeadTime(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->AMTCR, DMA2D_AMTCR_EN) == (DMA2D_AMTCR_EN)); } /** @defgroup DMA2D_LL_EF_FGND_Configuration Foreground Configuration Functions * @{ */ /** * @brief Set DMA2D foreground memory address, expressed on 32 bits ([31:0] bits). * @rmtoll FGMAR MA LL_DMA2D_FGND_SetMemAddr * @param DMA2Dx DMA2D Instance * @param MemoryAddress Value between Min_Data=0 and Max_Data=0xFFFFFFFF * @retval None */ __STATIC_INLINE void LL_DMA2D_FGND_SetMemAddr(DMA2D_TypeDef *DMA2Dx, uint32_t MemoryAddress) { LL_DMA2D_WriteReg(DMA2Dx, FGMAR, MemoryAddress); } /** * @brief Get DMA2D foreground memory address, expressed on 32 bits ([31:0] bits). * @rmtoll FGMAR MA LL_DMA2D_FGND_GetMemAddr * @param DMA2Dx DMA2D Instance * @retval Foreground memory address value between Min_Data=0 and Max_Data=0xFFFFFFFF */ __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetMemAddr(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(LL_DMA2D_ReadReg(DMA2Dx, FGMAR)); } /** * @brief Enable DMA2D foreground CLUT loading. * @rmtoll FGPFCCR START LL_DMA2D_FGND_EnableCLUTLoad * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_FGND_EnableCLUTLoad(DMA2D_TypeDef *DMA2Dx) { SET_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_START); } /** * @brief Indicate if DMA2D foreground CLUT loading is enabled. * @rmtoll FGPFCCR START LL_DMA2D_FGND_IsEnabledCLUTLoad * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_FGND_IsEnabledCLUTLoad(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_START) == (DMA2D_FGPFCCR_START)); } /** * @brief Set DMA2D foreground color mode. * @rmtoll FGPFCCR CM LL_DMA2D_FGND_SetColorMode * @param DMA2Dx DMA2D Instance * @param ColorMode This parameter can be one of the following values: * @arg @ref LL_DMA2D_INPUT_MODE_ARGB8888 * @arg @ref LL_DMA2D_INPUT_MODE_RGB888 * @arg @ref LL_DMA2D_INPUT_MODE_RGB565 * @arg @ref LL_DMA2D_INPUT_MODE_ARGB1555 * @arg @ref LL_DMA2D_INPUT_MODE_ARGB4444 * @arg @ref LL_DMA2D_INPUT_MODE_L8 * @arg @ref LL_DMA2D_INPUT_MODE_AL44 * @arg @ref LL_DMA2D_INPUT_MODE_AL88 * @arg @ref LL_DMA2D_INPUT_MODE_L4 * @arg @ref LL_DMA2D_INPUT_MODE_A8 * @arg @ref LL_DMA2D_INPUT_MODE_A4 * @retval None */ __STATIC_INLINE void LL_DMA2D_FGND_SetColorMode(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode) { MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CM, ColorMode); } /** * @brief Return DMA2D foreground color mode. * @rmtoll FGPFCCR CM LL_DMA2D_FGND_GetColorMode * @param DMA2Dx DMA2D Instance * @retval Returned value can be one of the following values: * @arg @ref LL_DMA2D_INPUT_MODE_ARGB8888 * @arg @ref LL_DMA2D_INPUT_MODE_RGB888 * @arg @ref LL_DMA2D_INPUT_MODE_RGB565 * @arg @ref LL_DMA2D_INPUT_MODE_ARGB1555 * @arg @ref LL_DMA2D_INPUT_MODE_ARGB4444 * @arg @ref LL_DMA2D_INPUT_MODE_L8 * @arg @ref LL_DMA2D_INPUT_MODE_AL44 * @arg @ref LL_DMA2D_INPUT_MODE_AL88 * @arg @ref LL_DMA2D_INPUT_MODE_L4 * @arg @ref LL_DMA2D_INPUT_MODE_A8 * @arg @ref LL_DMA2D_INPUT_MODE_A4 */ __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetColorMode(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CM)); } /** * @brief Set DMA2D foreground alpha mode. * @rmtoll FGPFCCR AM LL_DMA2D_FGND_SetAlphaMode * @param DMA2Dx DMA2D Instance * @param AphaMode This parameter can be one of the following values: * @arg @ref LL_DMA2D_ALPHA_MODE_NO_MODIF * @arg @ref LL_DMA2D_ALPHA_MODE_REPLACE * @arg @ref LL_DMA2D_ALPHA_MODE_COMBINE * @retval None */ __STATIC_INLINE void LL_DMA2D_FGND_SetAlphaMode(DMA2D_TypeDef *DMA2Dx, uint32_t AphaMode) { MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_AM, AphaMode); } /** * @brief Return DMA2D foreground alpha mode. * @rmtoll FGPFCCR AM LL_DMA2D_FGND_GetAlphaMode * @param DMA2Dx DMA2D Instance * @retval Returned value can be one of the following values: * @arg @ref LL_DMA2D_ALPHA_MODE_NO_MODIF * @arg @ref LL_DMA2D_ALPHA_MODE_REPLACE * @arg @ref LL_DMA2D_ALPHA_MODE_COMBINE */ __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetAlphaMode(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_AM)); } /** * @brief Set DMA2D foreground alpha value, expressed on 8 bits ([7:0] bits). * @rmtoll FGPFCCR ALPHA LL_DMA2D_FGND_SetAlpha * @param DMA2Dx DMA2D Instance * @param Alpha Value between Min_Data=0 and Max_Data=0xFF * @retval None */ __STATIC_INLINE void LL_DMA2D_FGND_SetAlpha(DMA2D_TypeDef *DMA2Dx, uint32_t Alpha) { MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_ALPHA, (Alpha << DMA2D_FGPFCCR_ALPHA_Pos)); } /** * @brief Return DMA2D foreground alpha value, expressed on 8 bits ([7:0] bits). * @rmtoll FGPFCCR ALPHA LL_DMA2D_FGND_GetAlpha * @param DMA2Dx DMA2D Instance * @retval Alpha value between Min_Data=0 and Max_Data=0xFF */ __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetAlpha(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_ALPHA) >> DMA2D_FGPFCCR_ALPHA_Pos); } /** * @brief Set DMA2D foreground line offset, expressed on 14 bits ([13:0] bits). * @rmtoll FGOR LO LL_DMA2D_FGND_SetLineOffset * @param DMA2Dx DMA2D Instance * @param LineOffset Value between Min_Data=0 and Max_Data=0x3FF * @retval None */ __STATIC_INLINE void LL_DMA2D_FGND_SetLineOffset(DMA2D_TypeDef *DMA2Dx, uint32_t LineOffset) { MODIFY_REG(DMA2Dx->FGOR, DMA2D_FGOR_LO, LineOffset); } /** * @brief Return DMA2D foreground line offset, expressed on 14 bits ([13:0] bits). * @rmtoll FGOR LO LL_DMA2D_FGND_GetLineOffset * @param DMA2Dx DMA2D Instance * @retval Foreground line offset value between Min_Data=0 and Max_Data=0x3FF */ __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetLineOffset(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->FGOR, DMA2D_FGOR_LO)); } /** * @brief Set DMA2D foreground color values, expressed on 24 bits ([23:0] bits). * @rmtoll FGCOLR RED LL_DMA2D_FGND_SetColor * @rmtoll FGCOLR GREEN LL_DMA2D_FGND_SetColor * @rmtoll FGCOLR BLUE LL_DMA2D_FGND_SetColor * @param DMA2Dx DMA2D Instance * @param Red Value between Min_Data=0 and Max_Data=0xFF * @param Green Value between Min_Data=0 and Max_Data=0xFF * @param Blue Value between Min_Data=0 and Max_Data=0xFF * @retval None */ __STATIC_INLINE void LL_DMA2D_FGND_SetColor(DMA2D_TypeDef *DMA2Dx, uint32_t Red, uint32_t Green, uint32_t Blue) { MODIFY_REG(DMA2Dx->FGCOLR, (DMA2D_FGCOLR_RED | DMA2D_FGCOLR_GREEN | DMA2D_FGCOLR_BLUE), \ ((Red << DMA2D_FGCOLR_RED_Pos) | (Green << DMA2D_FGCOLR_GREEN_Pos) | Blue)); } /** * @brief Set DMA2D foreground red color value, expressed on 8 bits ([7:0] bits). * @rmtoll FGCOLR RED LL_DMA2D_FGND_SetRedColor * @param DMA2Dx DMA2D Instance * @param Red Value between Min_Data=0 and Max_Data=0xFF * @retval None */ __STATIC_INLINE void LL_DMA2D_FGND_SetRedColor(DMA2D_TypeDef *DMA2Dx, uint32_t Red) { MODIFY_REG(DMA2Dx->FGCOLR, DMA2D_FGCOLR_RED, (Red << DMA2D_FGCOLR_RED_Pos)); } /** * @brief Return DMA2D foreground red color value, expressed on 8 bits ([7:0] bits). * @rmtoll FGCOLR RED LL_DMA2D_FGND_GetRedColor * @param DMA2Dx DMA2D Instance * @retval Red color value between Min_Data=0 and Max_Data=0xFF */ __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetRedColor(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->FGCOLR, DMA2D_FGCOLR_RED) >> DMA2D_FGCOLR_RED_Pos); } /** * @brief Set DMA2D foreground green color value, expressed on 8 bits ([7:0] bits). * @rmtoll FGCOLR GREEN LL_DMA2D_FGND_SetGreenColor * @param DMA2Dx DMA2D Instance * @param Green Value between Min_Data=0 and Max_Data=0xFF * @retval None */ __STATIC_INLINE void LL_DMA2D_FGND_SetGreenColor(DMA2D_TypeDef *DMA2Dx, uint32_t Green) { MODIFY_REG(DMA2Dx->FGCOLR, DMA2D_FGCOLR_GREEN, (Green << DMA2D_FGCOLR_GREEN_Pos)); } /** * @brief Return DMA2D foreground green color value, expressed on 8 bits ([7:0] bits). * @rmtoll FGCOLR GREEN LL_DMA2D_FGND_GetGreenColor * @param DMA2Dx DMA2D Instance * @retval Green color value between Min_Data=0 and Max_Data=0xFF */ __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetGreenColor(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->FGCOLR, DMA2D_FGCOLR_GREEN) >> DMA2D_FGCOLR_GREEN_Pos); } /** * @brief Set DMA2D foreground blue color value, expressed on 8 bits ([7:0] bits). * @rmtoll FGCOLR BLUE LL_DMA2D_FGND_SetBlueColor * @param DMA2Dx DMA2D Instance * @param Blue Value between Min_Data=0 and Max_Data=0xFF * @retval None */ __STATIC_INLINE void LL_DMA2D_FGND_SetBlueColor(DMA2D_TypeDef *DMA2Dx, uint32_t Blue) { MODIFY_REG(DMA2Dx->FGCOLR, DMA2D_FGCOLR_BLUE, Blue); } /** * @brief Return DMA2D foreground blue color value, expressed on 8 bits ([7:0] bits). * @rmtoll FGCOLR BLUE LL_DMA2D_FGND_GetBlueColor * @param DMA2Dx DMA2D Instance * @retval Blue color value between Min_Data=0 and Max_Data=0xFF */ __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetBlueColor(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->FGCOLR, DMA2D_FGCOLR_BLUE)); } /** * @brief Set DMA2D foreground CLUT memory address, expressed on 32 bits ([31:0] bits). * @rmtoll FGCMAR MA LL_DMA2D_FGND_SetCLUTMemAddr * @param DMA2Dx DMA2D Instance * @param CLUTMemoryAddress Value between Min_Data=0 and Max_Data=0xFFFFFFFF * @retval None */ __STATIC_INLINE void LL_DMA2D_FGND_SetCLUTMemAddr(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTMemoryAddress) { LL_DMA2D_WriteReg(DMA2Dx, FGCMAR, CLUTMemoryAddress); } /** * @brief Get DMA2D foreground CLUT memory address, expressed on 32 bits ([31:0] bits). * @rmtoll FGCMAR MA LL_DMA2D_FGND_GetCLUTMemAddr * @param DMA2Dx DMA2D Instance * @retval Foreground CLUT memory address value between Min_Data=0 and Max_Data=0xFFFFFFFF */ __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetCLUTMemAddr(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(LL_DMA2D_ReadReg(DMA2Dx, FGCMAR)); } /** * @brief Set DMA2D foreground CLUT size, expressed on 8 bits ([7:0] bits). * @rmtoll FGPFCCR CS LL_DMA2D_FGND_SetCLUTSize * @param DMA2Dx DMA2D Instance * @param CLUTSize Value between Min_Data=0 and Max_Data=0xFF * @retval None */ __STATIC_INLINE void LL_DMA2D_FGND_SetCLUTSize(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTSize) { MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CS, (CLUTSize << DMA2D_FGPFCCR_CS_Pos)); } /** * @brief Get DMA2D foreground CLUT size, expressed on 8 bits ([7:0] bits). * @rmtoll FGPFCCR CS LL_DMA2D_FGND_GetCLUTSize * @param DMA2Dx DMA2D Instance * @retval Foreground CLUT size value between Min_Data=0 and Max_Data=0xFF */ __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetCLUTSize(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CS) >> DMA2D_FGPFCCR_CS_Pos); } /** * @brief Set DMA2D foreground CLUT color mode. * @rmtoll FGPFCCR CCM LL_DMA2D_FGND_SetCLUTColorMode * @param DMA2Dx DMA2D Instance * @param CLUTColorMode This parameter can be one of the following values: * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_ARGB8888 * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_RGB888 * @retval None */ __STATIC_INLINE void LL_DMA2D_FGND_SetCLUTColorMode(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTColorMode) { MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CCM, CLUTColorMode); } /** * @brief Return DMA2D foreground CLUT color mode. * @rmtoll FGPFCCR CCM LL_DMA2D_FGND_GetCLUTColorMode * @param DMA2Dx DMA2D Instance * @retval Returned value can be one of the following values: * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_ARGB8888 * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_RGB888 */ __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetCLUTColorMode(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CCM)); } /** * @} */ /** @defgroup DMA2D_LL_EF_BGND_Configuration Background Configuration Functions * @{ */ /** * @brief Set DMA2D background memory address, expressed on 32 bits ([31:0] bits). * @rmtoll BGMAR MA LL_DMA2D_BGND_SetMemAddr * @param DMA2Dx DMA2D Instance * @param MemoryAddress Value between Min_Data=0 and Max_Data=0xFFFFFFFF * @retval None */ __STATIC_INLINE void LL_DMA2D_BGND_SetMemAddr(DMA2D_TypeDef *DMA2Dx, uint32_t MemoryAddress) { LL_DMA2D_WriteReg(DMA2Dx, BGMAR, MemoryAddress); } /** * @brief Get DMA2D background memory address, expressed on 32 bits ([31:0] bits). * @rmtoll BGMAR MA LL_DMA2D_BGND_GetMemAddr * @param DMA2Dx DMA2D Instance * @retval Background memory address value between Min_Data=0 and Max_Data=0xFFFFFFFF */ __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetMemAddr(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(LL_DMA2D_ReadReg(DMA2Dx, BGMAR)); } /** * @brief Enable DMA2D background CLUT loading. * @rmtoll BGPFCCR START LL_DMA2D_BGND_EnableCLUTLoad * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_BGND_EnableCLUTLoad(DMA2D_TypeDef *DMA2Dx) { SET_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_START); } /** * @brief Indicate if DMA2D background CLUT loading is enabled. * @rmtoll BGPFCCR START LL_DMA2D_BGND_IsEnabledCLUTLoad * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_BGND_IsEnabledCLUTLoad(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_START) == (DMA2D_BGPFCCR_START)); } /** * @brief Set DMA2D background color mode. * @rmtoll BGPFCCR CM LL_DMA2D_BGND_SetColorMode * @param DMA2Dx DMA2D Instance * @param ColorMode This parameter can be one of the following values: * @arg @ref LL_DMA2D_INPUT_MODE_ARGB8888 * @arg @ref LL_DMA2D_INPUT_MODE_RGB888 * @arg @ref LL_DMA2D_INPUT_MODE_RGB565 * @arg @ref LL_DMA2D_INPUT_MODE_ARGB1555 * @arg @ref LL_DMA2D_INPUT_MODE_ARGB4444 * @arg @ref LL_DMA2D_INPUT_MODE_L8 * @arg @ref LL_DMA2D_INPUT_MODE_AL44 * @arg @ref LL_DMA2D_INPUT_MODE_AL88 * @arg @ref LL_DMA2D_INPUT_MODE_L4 * @arg @ref LL_DMA2D_INPUT_MODE_A8 * @arg @ref LL_DMA2D_INPUT_MODE_A4 * @retval None */ __STATIC_INLINE void LL_DMA2D_BGND_SetColorMode(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode) { MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CM, ColorMode); } /** * @brief Return DMA2D background color mode. * @rmtoll BGPFCCR CM LL_DMA2D_BGND_GetColorMode * @param DMA2Dx DMA2D Instance * @retval Returned value can be one of the following values: * @arg @ref LL_DMA2D_INPUT_MODE_ARGB8888 * @arg @ref LL_DMA2D_INPUT_MODE_RGB888 * @arg @ref LL_DMA2D_INPUT_MODE_RGB565 * @arg @ref LL_DMA2D_INPUT_MODE_ARGB1555 * @arg @ref LL_DMA2D_INPUT_MODE_ARGB4444 * @arg @ref LL_DMA2D_INPUT_MODE_L8 * @arg @ref LL_DMA2D_INPUT_MODE_AL44 * @arg @ref LL_DMA2D_INPUT_MODE_AL88 * @arg @ref LL_DMA2D_INPUT_MODE_L4 * @arg @ref LL_DMA2D_INPUT_MODE_A8 * @arg @ref LL_DMA2D_INPUT_MODE_A4 */ __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetColorMode(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CM)); } /** * @brief Set DMA2D background alpha mode. * @rmtoll BGPFCCR AM LL_DMA2D_BGND_SetAlphaMode * @param DMA2Dx DMA2D Instance * @param AphaMode This parameter can be one of the following values: * @arg @ref LL_DMA2D_ALPHA_MODE_NO_MODIF * @arg @ref LL_DMA2D_ALPHA_MODE_REPLACE * @arg @ref LL_DMA2D_ALPHA_MODE_COMBINE * @retval None */ __STATIC_INLINE void LL_DMA2D_BGND_SetAlphaMode(DMA2D_TypeDef *DMA2Dx, uint32_t AphaMode) { MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_AM, AphaMode); } /** * @brief Return DMA2D background alpha mode. * @rmtoll BGPFCCR AM LL_DMA2D_BGND_GetAlphaMode * @param DMA2Dx DMA2D Instance * @retval Returned value can be one of the following values: * @arg @ref LL_DMA2D_ALPHA_MODE_NO_MODIF * @arg @ref LL_DMA2D_ALPHA_MODE_REPLACE * @arg @ref LL_DMA2D_ALPHA_MODE_COMBINE */ __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetAlphaMode(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_AM)); } /** * @brief Set DMA2D background alpha value, expressed on 8 bits ([7:0] bits). * @rmtoll BGPFCCR ALPHA LL_DMA2D_BGND_SetAlpha * @param DMA2Dx DMA2D Instance * @param Alpha Value between Min_Data=0 and Max_Data=0xFF * @retval None */ __STATIC_INLINE void LL_DMA2D_BGND_SetAlpha(DMA2D_TypeDef *DMA2Dx, uint32_t Alpha) { MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_ALPHA, (Alpha << DMA2D_BGPFCCR_ALPHA_Pos)); } /** * @brief Return DMA2D background alpha value, expressed on 8 bits ([7:0] bits). * @rmtoll BGPFCCR ALPHA LL_DMA2D_BGND_GetAlpha * @param DMA2Dx DMA2D Instance * @retval Alpha value between Min_Data=0 and Max_Data=0xFF */ __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetAlpha(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_ALPHA) >> DMA2D_BGPFCCR_ALPHA_Pos); } /** * @brief Set DMA2D background line offset, expressed on 14 bits ([13:0] bits). * @rmtoll BGOR LO LL_DMA2D_BGND_SetLineOffset * @param DMA2Dx DMA2D Instance * @param LineOffset Value between Min_Data=0 and Max_Data=0x3FF * @retval None */ __STATIC_INLINE void LL_DMA2D_BGND_SetLineOffset(DMA2D_TypeDef *DMA2Dx, uint32_t LineOffset) { MODIFY_REG(DMA2Dx->BGOR, DMA2D_BGOR_LO, LineOffset); } /** * @brief Return DMA2D background line offset, expressed on 14 bits ([13:0] bits). * @rmtoll BGOR LO LL_DMA2D_BGND_GetLineOffset * @param DMA2Dx DMA2D Instance * @retval Background line offset value between Min_Data=0 and Max_Data=0x3FF */ __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetLineOffset(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->BGOR, DMA2D_BGOR_LO)); } /** * @brief Set DMA2D background color values, expressed on 24 bits ([23:0] bits). * @rmtoll BGCOLR RED LL_DMA2D_BGND_SetColor * @rmtoll BGCOLR GREEN LL_DMA2D_BGND_SetColor * @rmtoll BGCOLR BLUE LL_DMA2D_BGND_SetColor * @param DMA2Dx DMA2D Instance * @param Red Value between Min_Data=0 and Max_Data=0xFF * @param Green Value between Min_Data=0 and Max_Data=0xFF * @param Blue Value between Min_Data=0 and Max_Data=0xFF * @retval None */ __STATIC_INLINE void LL_DMA2D_BGND_SetColor(DMA2D_TypeDef *DMA2Dx, uint32_t Red, uint32_t Green, uint32_t Blue) { MODIFY_REG(DMA2Dx->BGCOLR, (DMA2D_BGCOLR_RED | DMA2D_BGCOLR_GREEN | DMA2D_BGCOLR_BLUE), \ ((Red << DMA2D_BGCOLR_RED_Pos) | (Green << DMA2D_BGCOLR_GREEN_Pos) | Blue)); } /** * @brief Set DMA2D background red color value, expressed on 8 bits ([7:0] bits). * @rmtoll BGCOLR RED LL_DMA2D_BGND_SetRedColor * @param DMA2Dx DMA2D Instance * @param Red Value between Min_Data=0 and Max_Data=0xFF * @retval None */ __STATIC_INLINE void LL_DMA2D_BGND_SetRedColor(DMA2D_TypeDef *DMA2Dx, uint32_t Red) { MODIFY_REG(DMA2Dx->BGCOLR, DMA2D_BGCOLR_RED, (Red << DMA2D_BGCOLR_RED_Pos)); } /** * @brief Return DMA2D background red color value, expressed on 8 bits ([7:0] bits). * @rmtoll BGCOLR RED LL_DMA2D_BGND_GetRedColor * @param DMA2Dx DMA2D Instance * @retval Red color value between Min_Data=0 and Max_Data=0xFF */ __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetRedColor(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->BGCOLR, DMA2D_BGCOLR_RED) >> DMA2D_BGCOLR_RED_Pos); } /** * @brief Set DMA2D background green color value, expressed on 8 bits ([7:0] bits). * @rmtoll BGCOLR GREEN LL_DMA2D_BGND_SetGreenColor * @param DMA2Dx DMA2D Instance * @param Green Value between Min_Data=0 and Max_Data=0xFF * @retval None */ __STATIC_INLINE void LL_DMA2D_BGND_SetGreenColor(DMA2D_TypeDef *DMA2Dx, uint32_t Green) { MODIFY_REG(DMA2Dx->BGCOLR, DMA2D_BGCOLR_GREEN, (Green << DMA2D_BGCOLR_GREEN_Pos)); } /** * @brief Return DMA2D background green color value, expressed on 8 bits ([7:0] bits). * @rmtoll BGCOLR GREEN LL_DMA2D_BGND_GetGreenColor * @param DMA2Dx DMA2D Instance * @retval Green color value between Min_Data=0 and Max_Data=0xFF */ __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetGreenColor(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->BGCOLR, DMA2D_BGCOLR_GREEN) >> DMA2D_BGCOLR_GREEN_Pos); } /** * @brief Set DMA2D background blue color value, expressed on 8 bits ([7:0] bits). * @rmtoll BGCOLR BLUE LL_DMA2D_BGND_SetBlueColor * @param DMA2Dx DMA2D Instance * @param Blue Value between Min_Data=0 and Max_Data=0xFF * @retval None */ __STATIC_INLINE void LL_DMA2D_BGND_SetBlueColor(DMA2D_TypeDef *DMA2Dx, uint32_t Blue) { MODIFY_REG(DMA2Dx->BGCOLR, DMA2D_BGCOLR_BLUE, Blue); } /** * @brief Return DMA2D background blue color value, expressed on 8 bits ([7:0] bits). * @rmtoll BGCOLR BLUE LL_DMA2D_BGND_GetBlueColor * @param DMA2Dx DMA2D Instance * @retval Blue color value between Min_Data=0 and Max_Data=0xFF */ __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetBlueColor(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->BGCOLR, DMA2D_BGCOLR_BLUE)); } /** * @brief Set DMA2D background CLUT memory address, expressed on 32 bits ([31:0] bits). * @rmtoll BGCMAR MA LL_DMA2D_BGND_SetCLUTMemAddr * @param DMA2Dx DMA2D Instance * @param CLUTMemoryAddress Value between Min_Data=0 and Max_Data=0xFFFFFFFF * @retval None */ __STATIC_INLINE void LL_DMA2D_BGND_SetCLUTMemAddr(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTMemoryAddress) { LL_DMA2D_WriteReg(DMA2Dx, BGCMAR, CLUTMemoryAddress); } /** * @brief Get DMA2D background CLUT memory address, expressed on 32 bits ([31:0] bits). * @rmtoll BGCMAR MA LL_DMA2D_BGND_GetCLUTMemAddr * @param DMA2Dx DMA2D Instance * @retval Background CLUT memory address value between Min_Data=0 and Max_Data=0xFFFFFFFF */ __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetCLUTMemAddr(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(LL_DMA2D_ReadReg(DMA2Dx, BGCMAR)); } /** * @brief Set DMA2D background CLUT size, expressed on 8 bits ([7:0] bits). * @rmtoll BGPFCCR CS LL_DMA2D_BGND_SetCLUTSize * @param DMA2Dx DMA2D Instance * @param CLUTSize Value between Min_Data=0 and Max_Data=0xFF * @retval None */ __STATIC_INLINE void LL_DMA2D_BGND_SetCLUTSize(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTSize) { MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CS, (CLUTSize << DMA2D_BGPFCCR_CS_Pos)); } /** * @brief Get DMA2D background CLUT size, expressed on 8 bits ([7:0] bits). * @rmtoll BGPFCCR CS LL_DMA2D_BGND_GetCLUTSize * @param DMA2Dx DMA2D Instance * @retval Background CLUT size value between Min_Data=0 and Max_Data=0xFF */ __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetCLUTSize(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CS) >> DMA2D_BGPFCCR_CS_Pos); } /** * @brief Set DMA2D background CLUT color mode. * @rmtoll BGPFCCR CCM LL_DMA2D_BGND_SetCLUTColorMode * @param DMA2Dx DMA2D Instance * @param CLUTColorMode This parameter can be one of the following values: * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_ARGB8888 * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_RGB888 * @retval None */ __STATIC_INLINE void LL_DMA2D_BGND_SetCLUTColorMode(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTColorMode) { MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CCM, CLUTColorMode); } /** * @brief Return DMA2D background CLUT color mode. * @rmtoll BGPFCCR CCM LL_DMA2D_BGND_GetCLUTColorMode * @param DMA2Dx DMA2D Instance * @retval Returned value can be one of the following values: * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_ARGB8888 * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_RGB888 */ __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetCLUTColorMode(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CCM)); } /** * @} */ /** * @} */ /** @defgroup DMA2D_LL_EF_FLAG_MANAGEMENT Flag Management * @{ */ /** * @brief Check if the DMA2D Configuration Error Interrupt Flag is set or not * @rmtoll ISR CEIF LL_DMA2D_IsActiveFlag_CE * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_CE(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->ISR, DMA2D_ISR_CEIF) == (DMA2D_ISR_CEIF)); } /** * @brief Check if the DMA2D CLUT Transfer Complete Interrupt Flag is set or not * @rmtoll ISR CTCIF LL_DMA2D_IsActiveFlag_CTC * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_CTC(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->ISR, DMA2D_ISR_CTCIF) == (DMA2D_ISR_CTCIF)); } /** * @brief Check if the DMA2D CLUT Access Error Interrupt Flag is set or not * @rmtoll ISR CAEIF LL_DMA2D_IsActiveFlag_CAE * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_CAE(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->ISR, DMA2D_ISR_CAEIF) == (DMA2D_ISR_CAEIF)); } /** * @brief Check if the DMA2D Transfer Watermark Interrupt Flag is set or not * @rmtoll ISR TWIF LL_DMA2D_IsActiveFlag_TW * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_TW(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->ISR, DMA2D_ISR_TWIF) == (DMA2D_ISR_TWIF)); } /** * @brief Check if the DMA2D Transfer Complete Interrupt Flag is set or not * @rmtoll ISR TCIF LL_DMA2D_IsActiveFlag_TC * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_TC(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->ISR, DMA2D_ISR_TCIF) == (DMA2D_ISR_TCIF)); } /** * @brief Check if the DMA2D Transfer Error Interrupt Flag is set or not * @rmtoll ISR TEIF LL_DMA2D_IsActiveFlag_TE * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_TE(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->ISR, DMA2D_ISR_TEIF) == (DMA2D_ISR_TEIF)); } /** * @brief Clear DMA2D Configuration Error Interrupt Flag * @rmtoll IFCR CCEIF LL_DMA2D_ClearFlag_CE * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_ClearFlag_CE(DMA2D_TypeDef *DMA2Dx) { WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CCEIF); } /** * @brief Clear DMA2D CLUT Transfer Complete Interrupt Flag * @rmtoll IFCR CCTCIF LL_DMA2D_ClearFlag_CTC * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_ClearFlag_CTC(DMA2D_TypeDef *DMA2Dx) { WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CCTCIF); } /** * @brief Clear DMA2D CLUT Access Error Interrupt Flag * @rmtoll IFCR CAECIF LL_DMA2D_ClearFlag_CAE * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_ClearFlag_CAE(DMA2D_TypeDef *DMA2Dx) { WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CAECIF); } /** * @brief Clear DMA2D Transfer Watermark Interrupt Flag * @rmtoll IFCR CTWIF LL_DMA2D_ClearFlag_TW * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_ClearFlag_TW(DMA2D_TypeDef *DMA2Dx) { WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CTWIF); } /** * @brief Clear DMA2D Transfer Complete Interrupt Flag * @rmtoll IFCR CTCIF LL_DMA2D_ClearFlag_TC * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_ClearFlag_TC(DMA2D_TypeDef *DMA2Dx) { WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CTCIF); } /** * @brief Clear DMA2D Transfer Error Interrupt Flag * @rmtoll IFCR CTEIF LL_DMA2D_ClearFlag_TE * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_ClearFlag_TE(DMA2D_TypeDef *DMA2Dx) { WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CTEIF); } /** * @} */ /** @defgroup DMA2D_LL_EF_IT_MANAGEMENT Interruption Management * @{ */ /** * @brief Enable Configuration Error Interrupt * @rmtoll CR CEIE LL_DMA2D_EnableIT_CE * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_EnableIT_CE(DMA2D_TypeDef *DMA2Dx) { SET_BIT(DMA2Dx->CR, DMA2D_CR_CEIE); } /** * @brief Enable CLUT Transfer Complete Interrupt * @rmtoll CR CTCIE LL_DMA2D_EnableIT_CTC * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_EnableIT_CTC(DMA2D_TypeDef *DMA2Dx) { SET_BIT(DMA2Dx->CR, DMA2D_CR_CTCIE); } /** * @brief Enable CLUT Access Error Interrupt * @rmtoll CR CAEIE LL_DMA2D_EnableIT_CAE * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_EnableIT_CAE(DMA2D_TypeDef *DMA2Dx) { SET_BIT(DMA2Dx->CR, DMA2D_CR_CAEIE); } /** * @brief Enable Transfer Watermark Interrupt * @rmtoll CR TWIE LL_DMA2D_EnableIT_TW * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_EnableIT_TW(DMA2D_TypeDef *DMA2Dx) { SET_BIT(DMA2Dx->CR, DMA2D_CR_TWIE); } /** * @brief Enable Transfer Complete Interrupt * @rmtoll CR TCIE LL_DMA2D_EnableIT_TC * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_EnableIT_TC(DMA2D_TypeDef *DMA2Dx) { SET_BIT(DMA2Dx->CR, DMA2D_CR_TCIE); } /** * @brief Enable Transfer Error Interrupt * @rmtoll CR TEIE LL_DMA2D_EnableIT_TE * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_EnableIT_TE(DMA2D_TypeDef *DMA2Dx) { SET_BIT(DMA2Dx->CR, DMA2D_CR_TEIE); } /** * @brief Disable Configuration Error Interrupt * @rmtoll CR CEIE LL_DMA2D_DisableIT_CE * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_DisableIT_CE(DMA2D_TypeDef *DMA2Dx) { CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_CEIE); } /** * @brief Disable CLUT Transfer Complete Interrupt * @rmtoll CR CTCIE LL_DMA2D_DisableIT_CTC * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_DisableIT_CTC(DMA2D_TypeDef *DMA2Dx) { CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_CTCIE); } /** * @brief Disable CLUT Access Error Interrupt * @rmtoll CR CAEIE LL_DMA2D_DisableIT_CAE * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_DisableIT_CAE(DMA2D_TypeDef *DMA2Dx) { CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_CAEIE); } /** * @brief Disable Transfer Watermark Interrupt * @rmtoll CR TWIE LL_DMA2D_DisableIT_TW * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_DisableIT_TW(DMA2D_TypeDef *DMA2Dx) { CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_TWIE); } /** * @brief Disable Transfer Complete Interrupt * @rmtoll CR TCIE LL_DMA2D_DisableIT_TC * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_DisableIT_TC(DMA2D_TypeDef *DMA2Dx) { CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_TCIE); } /** * @brief Disable Transfer Error Interrupt * @rmtoll CR TEIE LL_DMA2D_DisableIT_TE * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_DisableIT_TE(DMA2D_TypeDef *DMA2Dx) { CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_TEIE); } /** * @brief Check if the DMA2D Configuration Error interrupt source is enabled or disabled. * @rmtoll CR CEIE LL_DMA2D_IsEnabledIT_CE * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_CE(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->CR, DMA2D_CR_CEIE) == (DMA2D_CR_CEIE)); } /** * @brief Check if the DMA2D CLUT Transfer Complete interrupt source is enabled or disabled. * @rmtoll CR CTCIE LL_DMA2D_IsEnabledIT_CTC * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_CTC(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->CR, DMA2D_CR_CTCIE) == (DMA2D_CR_CTCIE)); } /** * @brief Check if the DMA2D CLUT Access Error interrupt source is enabled or disabled. * @rmtoll CR CAEIE LL_DMA2D_IsEnabledIT_CAE * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_CAE(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->CR, DMA2D_CR_CAEIE) == (DMA2D_CR_CAEIE)); } /** * @brief Check if the DMA2D Transfer Watermark interrupt source is enabled or disabled. * @rmtoll CR TWIE LL_DMA2D_IsEnabledIT_TW * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_TW(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->CR, DMA2D_CR_TWIE) == (DMA2D_CR_TWIE)); } /** * @brief Check if the DMA2D Transfer Complete interrupt source is enabled or disabled. * @rmtoll CR TCIE LL_DMA2D_IsEnabledIT_TC * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_TC(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->CR, DMA2D_CR_TCIE) == (DMA2D_CR_TCIE)); } /** * @brief Check if the DMA2D Transfer Error interrupt source is enabled or disabled. * @rmtoll CR TEIE LL_DMA2D_IsEnabledIT_TE * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_TE(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->CR, DMA2D_CR_TEIE) == (DMA2D_CR_TEIE)); } /** * @} */ #if defined(USE_FULL_LL_DRIVER) /** @defgroup DMA2D_LL_EF_Init_Functions Initialization and De-initialization Functions * @{ */ ErrorStatus LL_DMA2D_DeInit(DMA2D_TypeDef *DMA2Dx); ErrorStatus LL_DMA2D_Init(DMA2D_TypeDef *DMA2Dx, LL_DMA2D_InitTypeDef *DMA2D_InitStruct); void LL_DMA2D_StructInit(LL_DMA2D_InitTypeDef *DMA2D_InitStruct); void LL_DMA2D_ConfigLayer(DMA2D_TypeDef *DMA2Dx, LL_DMA2D_LayerCfgTypeDef *DMA2D_LayerCfg, uint32_t LayerIdx); void LL_DMA2D_LayerCfgStructInit(LL_DMA2D_LayerCfgTypeDef *DMA2D_LayerCfg); void LL_DMA2D_ConfigOutputColor(DMA2D_TypeDef *DMA2Dx, LL_DMA2D_ColorTypeDef *DMA2D_ColorStruct); uint32_t LL_DMA2D_GetOutputBlueColor(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode); uint32_t LL_DMA2D_GetOutputGreenColor(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode); uint32_t LL_DMA2D_GetOutputRedColor(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode); uint32_t LL_DMA2D_GetOutputAlphaColor(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode); void LL_DMA2D_ConfigSize(DMA2D_TypeDef *DMA2Dx, uint32_t NbrOfLines, uint32_t NbrOfPixelsPerLines); /** * @} */ #endif /* USE_FULL_LL_DRIVER */ /** * @} */ /** * @} */ #endif /* defined (DMA2D) */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32F4xx_LL_DMA2D_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/