Mercurial > public > ostc4

view Documentations/dump-disc.cfg @ 1042:7efc8baa3ffa GasConsumption

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Reset timeout after Bluetooth disconnect: The counter triggering the shutdown for the OSTC was not reseted after closing the Bluetooth connection. As result an unintendet shutdown could happen. To avoid this the counter is now reseted during disconnection.
author Ideenmodellierer
date Mon, 27 Oct 2025 20:06:27 +0100
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f427IIT6
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

puts "Flash banks:"
flash banks

#puts "Reading FIRMWARE..."
# Requires OpenOCD 0.10.0 / released January 2017 ?
#flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000

#puts "Done."
exit