view Small_CPU/Src/tm_stm32f4_otp.c @ 634:7c73f066cd16

Enable sensor check for Analog PPO2 mode: Checks which may trigger a fallback warning were not activated in previous versions. Beside enabling the checks the test logic has been changed. Before the change an avarage was build automatically using the remaining both sensors if one sensor failed. The scenario that also one of the remaining sensors may be out of bounds was not covered. The new implementation allows an out of bounds detection for all sensors in parallel. In that special case the last valid value will be used until the diver takes action (Fallback warning)
author Ideenmodellierer
date Wed, 24 Feb 2021 19:18:26 +0100
parents 5f11787b4f42
children
line wrap: on
line source

/**	
 * |----------------------------------------------------------------------
 * | Copyright (C) Tilen Majerle, 2014
 * | 
 * | This program is free software: you can redistribute it and/or modify
 * | it under the terms of the GNU General Public License as published by
 * | the Free Software Foundation, either version 3 of the License, or
 * | any later version.
 * |  
 * | This program is distributed in the hope that it will be useful,
 * | but WITHOUT ANY WARRANTY; without even the implied warranty of
 * | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * | GNU General Public License for more details.
 * | 
 * | You should have received a copy of the GNU General Public License
 * | along with this program.  If not, see <http://www.gnu.org/licenses/>.
 * |----------------------------------------------------------------------
 */
#include "tm_stm32f4_otp.h"

HAL_StatusTypeDef TM_OTP_Write(uint8_t block, uint8_t byte, uint8_t data)
{
	HAL_StatusTypeDef answer;

	/* Check input parameters */
	if (
		block >= OTP_BLOCKS ||
		byte >= OTP_BYTES_IN_BLOCK
	) {
		/* Invalid parameters */
		return HAL_ERROR;
	}

	if(*(uint8_t *)(OTP_START_ADDR + block * OTP_BYTES_IN_BLOCK + byte) != 0xFF)
		return HAL_ERROR;	

	/* Unlock FLASH */
	HAL_FLASH_Unlock();

	answer = HAL_FLASH_Program(FLASH_TYPEPROGRAM_BYTE, (OTP_START_ADDR + block * OTP_BYTES_IN_BLOCK + byte), data);

	/* Lock FLASH */
	HAL_FLASH_Lock();

	return answer;
}


uint8_t TM_OTP_Read(uint8_t block, uint8_t byte) {
	uint8_t data;
	
	/* Check input parameters */
	if (
		block >= OTP_BLOCKS ||
		byte >= OTP_BYTES_IN_BLOCK
	) {
		/* Invalid parameters */
		return HAL_ERROR;
	}
	
	/* Get value */
	data = *(__IO uint8_t *)(OTP_START_ADDR + block * OTP_BYTES_IN_BLOCK + byte);
	
	/* Return data */
	return data;
}