Mercurial > public > ostc4
view RefPrj/RTE/.cproject @ 634:7c73f066cd16
Enable sensor check for Analog PPO2 mode:
Checks which may trigger a fallback warning were not activated in previous versions. Beside enabling the checks the test logic has been changed. Before the change an avarage was build automatically using the remaining both sensors if one sensor failed. The scenario that also one of the remaining sensors may be out of bounds was not covered. The new implementation allows an out of bounds detection for all sensors in parallel. In that special case the last valid value will be used until the diver takes action (Fallback warning)
| author | Ideenmodellierer |
|---|---|
| date | Wed, 24 Feb 2021 19:18:26 +0100 |
| parents | 1f24022345d1 |
| children | 61f14abce25d |
line wrap: on
line source
<?xml version="1.0" encoding="UTF-8" standalone="no"?> <?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage"> <storageModule moduleId="org.eclipse.cdt.core.settings"> <cconfiguration id="fr.ac6.managedbuild.config.gnu.cross.exe.debug.2145655687"> <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="fr.ac6.managedbuild.config.gnu.cross.exe.debug.2145655687" moduleId="org.eclipse.cdt.core.settings" name="Debug"> <externalSettings/> <extensions> <extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/> <extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> <extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> <extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> <extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/> <extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> </extensions> </storageModule> <storageModule moduleId="cdtBuildSystem" version="4.0.0"> <configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.debug" cleanCommand="rm -rf" description="" id="fr.ac6.managedbuild.config.gnu.cross.exe.debug.2145655687" name="Debug" parent="fr.ac6.managedbuild.config.gnu.cross.exe.debug" postannouncebuildStep="Generating binary and Printing size information:" postbuildStep="arm-none-eabi-objcopy -O binary "${BuildArtifactFileBaseName}.elf" "${BuildArtifactFileBaseName}.bin"; arm-none-eabi-size "${BuildArtifactFileName}""> <folderInfo id="fr.ac6.managedbuild.config.gnu.cross.exe.debug.2145655687." name="/" resourcePath=""> <toolChain id="fr.ac6.managedbuild.toolchain.gnu.cross.exe.debug.773919339" name="Ac6 STM32 MCU GCC" superClass="fr.ac6.managedbuild.toolchain.gnu.cross.exe.debug"> <option id="fr.ac6.managedbuild.option.gnu.cross.mcu.1069997727" name="Mcu" superClass="fr.ac6.managedbuild.option.gnu.cross.mcu" useByScannerDiscovery="false" value="STM32F411RETx" valueType="string"/> <option id="fr.ac6.managedbuild.option.gnu.cross.fpu.1337322285" name="Floating point hardware" superClass="fr.ac6.managedbuild.option.gnu.cross.fpu" useByScannerDiscovery="false" value="fr.ac6.managedbuild.option.gnu.cross.fpu.fpv4-sp-d16" valueType="enumerated"/> <option id="fr.ac6.managedbuild.option.gnu.cross.floatabi.2128124622" name="Floating-point ABI" superClass="fr.ac6.managedbuild.option.gnu.cross.floatabi" useByScannerDiscovery="false" value="fr.ac6.managedbuild.option.gnu.cross.floatabi.hard" valueType="enumerated"/> <option id="fr.ac6.managedbuild.option.gnu.cross.board.719527989" name="Board" superClass="fr.ac6.managedbuild.option.gnu.cross.board" useByScannerDiscovery="false" value="OSTC4_RTE2" valueType="string"/> <targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="fr.ac6.managedbuild.targetPlatform.gnu.cross.2036507469" isAbstract="false" osList="all" superClass="fr.ac6.managedbuild.targetPlatform.gnu.cross"/> <builder buildPath="${workspace_loc:/OSTC4_RTE}/Debug" id="fr.ac6.managedbuild.builder.gnu.cross.646520610" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="fr.ac6.managedbuild.builder.gnu.cross"/> <tool id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.1064816811" name="MCU GCC Compiler" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler"> <option id="fr.ac6.managedbuild.gnu.c.compiler.option.optimization.level.587576579" name="Optimization Level" superClass="fr.ac6.managedbuild.gnu.c.compiler.option.optimization.level" useByScannerDiscovery="false" value="fr.ac6.managedbuild.gnu.c.optimization.level.debug" valueType="enumerated"/> <option id="gnu.c.compiler.option.debugging.level.493106502" name="Debug Level" superClass="gnu.c.compiler.option.debugging.level" useByScannerDiscovery="false" value="gnu.c.debugging.level.max" valueType="enumerated"/> <option id="gnu.c.compiler.option.preprocessor.def.symbols.1649922014" name="Defined symbols (-D)" superClass="gnu.c.compiler.option.preprocessor.def.symbols" useByScannerDiscovery="false" valueType="definedSymbols"> <listOptionValue builtIn="false" value="STM32"/> <listOptionValue builtIn="false" value="STM32F4"/> <listOptionValue builtIn="false" value="STM32F411xE"/> </option> <option id="gnu.c.compiler.option.include.paths.1618459940" name="Include paths (-I)" superClass="gnu.c.compiler.option.include.paths" useByScannerDiscovery="false" valueType="includePath"> <listOptionValue builtIn="false" value=""${workspace_loc:/ostc4/Small_CPU/Inc}""/> <listOptionValue builtIn="false" value=""${workspace_loc:/ostc4/Discovery/Inc}""/> <listOptionValue builtIn="false" value=""${workspace_loc:/ostc4/Common/Drivers/STM32F4xx_HAL_Driver/Inc}""/> <listOptionValue builtIn="false" value=""${workspace_loc:/ostc4/Common/Drivers/STM32F4xx/Include}""/> <listOptionValue builtIn="false" value=""${workspace_loc:/ostc4/Common/Drivers/CMSIS/Include}""/> <listOptionValue builtIn="false" value=""${workspace_loc:/ostc4/Common/Inc}""/> </option> <option id="gnu.c.compiler.option.dialect.std.224885314" name="Language standard" superClass="gnu.c.compiler.option.dialect.std" useByScannerDiscovery="true" value="gnu.c.compiler.dialect.default" valueType="enumerated"/> <inputType id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.c.2126749510" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.c"/> <inputType id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.s.1160433093" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.s"/> </tool> <tool id="fr.ac6.managedbuild.tool.gnu.cross.cpp.compiler.697561463" name="MCU G++ Compiler" superClass="fr.ac6.managedbuild.tool.gnu.cross.cpp.compiler"> <option id="fr.ac6.managedbuild.gnu.cpp.compiler.option.optimization.level.453622205" name="Optimization Level" superClass="fr.ac6.managedbuild.gnu.cpp.compiler.option.optimization.level" useByScannerDiscovery="false"/> <option id="gnu.cpp.compiler.option.debugging.level.1059605192" name="Debug Level" superClass="gnu.cpp.compiler.option.debugging.level" useByScannerDiscovery="false" value="gnu.cpp.compiler.debugging.level.max" valueType="enumerated"/> </tool> <tool id="fr.ac6.managedbuild.tool.gnu.cross.c.linker.829628376" name="MCU GCC Linker" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.linker"> <option id="fr.ac6.managedbuild.tool.gnu.cross.c.linker.script.1343275553" name="Linker Script (-T)" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.linker.script" useByScannerDiscovery="false" value="${ProjDirPath}\..\ostc4\Small_CPU\CPU2-RTE.ld" valueType="string"/> <option id="gnu.c.link.option.nodeflibs.1383905067" name="Do not use default libraries (-nodefaultlibs)" superClass="gnu.c.link.option.nodeflibs" useByScannerDiscovery="false" value="false" valueType="boolean"/> <inputType id="cdt.managedbuild.tool.gnu.c.linker.input.60862160" superClass="cdt.managedbuild.tool.gnu.c.linker.input"> <additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/> <additionalInput kind="additionalinput" paths="$(LIBS)"/> </inputType> </tool> <tool id="fr.ac6.managedbuild.tool.gnu.cross.cpp.linker.234916389" name="MCU G++ Linker" superClass="fr.ac6.managedbuild.tool.gnu.cross.cpp.linker"/> <tool id="fr.ac6.managedbuild.tool.gnu.archiver.885152779" name="MCU GCC Archiver" superClass="fr.ac6.managedbuild.tool.gnu.archiver"/> <tool id="fr.ac6.managedbuild.tool.gnu.cross.assembler.806069457" name="MCU GCC Assembler" superClass="fr.ac6.managedbuild.tool.gnu.cross.assembler"> <inputType id="cdt.managedbuild.tool.gnu.assembler.input.1281355774" superClass="cdt.managedbuild.tool.gnu.assembler.input"/> <inputType id="fr.ac6.managedbuild.tool.gnu.cross.assembler.input.1270831598" superClass="fr.ac6.managedbuild.tool.gnu.cross.assembler.input"/> </tool> </toolChain> </folderInfo> <sourceEntries> <entry excluding="Drivers/STM32F4xx/Source/Templates/system_stm32f4xx.c|Drivers/STM32F4xx/Source/Templates/iar|Drivers/STM32F4xx/Source/Templates/gcc|Drivers/STM32F4xx/Source/Templates/arm|Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_timebase_tim_template.c|Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_timebase_rtc_wakeup_template.c|Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_timebase_rtc_alarm_template.c|Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_msp_template.c|Drivers/STM32F4xx_v220/Source/Templates|Drivers/STM32F4xx_HAL_DRIVER_v120/Src/stm32f4xx_hal_msp_template.c" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Common"/> <entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Small_CPU"/> </sourceEntries> </configuration> </storageModule> <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/> </cconfiguration> <cconfiguration id="fr.ac6.managedbuild.config.gnu.cross.exe.release.1176875035"> <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="fr.ac6.managedbuild.config.gnu.cross.exe.release.1176875035" moduleId="org.eclipse.cdt.core.settings" name="Release"> <externalSettings/> <extensions> <extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/> <extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> <extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> <extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> <extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/> <extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> </extensions> </storageModule> <storageModule moduleId="cdtBuildSystem" version="4.0.0"> <configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.release" cleanCommand="rm -rf" description="" id="fr.ac6.managedbuild.config.gnu.cross.exe.release.1176875035" name="Release" parent="fr.ac6.managedbuild.config.gnu.cross.exe.release" postannouncebuildStep="Generating binary and Printing size information:" postbuildStep="arm-none-eabi-objcopy -O binary "${BuildArtifactFileBaseName}.elf" "${BuildArtifactFileBaseName}.bin"; arm-none-eabi-size -B "${BuildArtifactFileName}""> <folderInfo id="fr.ac6.managedbuild.config.gnu.cross.exe.release.1176875035." name="/" resourcePath=""> <toolChain id="fr.ac6.managedbuild.toolchain.gnu.cross.exe.release.644592221" name="Ac6 STM32 MCU GCC" superClass="fr.ac6.managedbuild.toolchain.gnu.cross.exe.release"> <option id="fr.ac6.managedbuild.option.gnu.cross.mcu.981843125" name="Mcu" superClass="fr.ac6.managedbuild.option.gnu.cross.mcu" useByScannerDiscovery="false" value="STM32F411RETx" valueType="string"/> <option id="fr.ac6.managedbuild.option.gnu.cross.fpu.795390711" name="Floating point hardware" superClass="fr.ac6.managedbuild.option.gnu.cross.fpu" useByScannerDiscovery="false" value="fr.ac6.managedbuild.option.gnu.cross.fpu.fpv4-sp-d16" valueType="enumerated"/> <option id="fr.ac6.managedbuild.option.gnu.cross.floatabi.195981684" name="Floating-point ABI" superClass="fr.ac6.managedbuild.option.gnu.cross.floatabi" useByScannerDiscovery="false" value="fr.ac6.managedbuild.option.gnu.cross.floatabi.hard" valueType="enumerated"/> <option id="fr.ac6.managedbuild.option.gnu.cross.board.851813776" name="Board" superClass="fr.ac6.managedbuild.option.gnu.cross.board" useByScannerDiscovery="false" value="OTSTC4_RTE" valueType="string"/> <targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="fr.ac6.managedbuild.targetPlatform.gnu.cross.2038367534" isAbstract="false" osList="all" superClass="fr.ac6.managedbuild.targetPlatform.gnu.cross"/> <builder buildPath="${workspace_loc:/OSTC4_RTE}/Release" id="fr.ac6.managedbuild.builder.gnu.cross.402721682" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="fr.ac6.managedbuild.builder.gnu.cross"/> <tool id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.1223896604" name="MCU GCC Compiler" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler"> <option id="fr.ac6.managedbuild.gnu.c.compiler.option.optimization.level.1077587409" name="Optimization Level" superClass="fr.ac6.managedbuild.gnu.c.compiler.option.optimization.level" useByScannerDiscovery="false" value="fr.ac6.managedbuild.gnu.c.optimization.level.more" valueType="enumerated"/> <option id="gnu.c.compiler.option.debugging.level.1256562145" name="Debug Level" superClass="gnu.c.compiler.option.debugging.level" useByScannerDiscovery="false" value="gnu.c.debugging.level.none" valueType="enumerated"/> <option id="gnu.c.compiler.option.preprocessor.def.symbols.787678213" name="Defined symbols (-D)" superClass="gnu.c.compiler.option.preprocessor.def.symbols" useByScannerDiscovery="false" valueType="definedSymbols"> <listOptionValue builtIn="false" value="STM32"/> <listOptionValue builtIn="false" value="STM32F4"/> <listOptionValue builtIn="false" value="STM32F411xE"/> </option> <option id="gnu.c.compiler.option.include.paths.1685792522" name="Include paths (-I)" superClass="gnu.c.compiler.option.include.paths" useByScannerDiscovery="false" valueType="includePath"> <listOptionValue builtIn="false" value=""${workspace_loc:/ostc4/Small_CPU/Inc}""/> <listOptionValue builtIn="false" value=""${workspace_loc:/ostc4/Discovery/Inc}""/> <listOptionValue builtIn="false" value=""${workspace_loc:/ostc4/Common/Drivers/STM32F4xx_HAL_Driver/Inc}""/> <listOptionValue builtIn="false" value=""${workspace_loc:/ostc4/Common/Drivers/STM32F4xx/Include}""/> <listOptionValue builtIn="false" value=""${workspace_loc:/ostc4/Common/Drivers/CMSIS/Include}""/> <listOptionValue builtIn="false" value=""${workspace_loc:/ostc4/Common/Inc}""/> </option> <inputType id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.c.925384553" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.c"/> <inputType id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.s.1417131239" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.s"/> </tool> <tool id="fr.ac6.managedbuild.tool.gnu.cross.cpp.compiler.1725959452" name="MCU G++ Compiler" superClass="fr.ac6.managedbuild.tool.gnu.cross.cpp.compiler"> <option id="fr.ac6.managedbuild.gnu.cpp.compiler.option.optimization.level.352827930" name="Optimization Level" superClass="fr.ac6.managedbuild.gnu.cpp.compiler.option.optimization.level" useByScannerDiscovery="false" value="fr.ac6.managedbuild.gnu.cpp.optimization.level.most" valueType="enumerated"/> <option id="gnu.cpp.compiler.option.debugging.level.1980132124" name="Debug Level" superClass="gnu.cpp.compiler.option.debugging.level" useByScannerDiscovery="false" value="gnu.cpp.compiler.debugging.level.none" valueType="enumerated"/> </tool> <tool id="fr.ac6.managedbuild.tool.gnu.cross.c.linker.1224776758" name="MCU GCC Linker" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.linker"> <option id="fr.ac6.managedbuild.tool.gnu.cross.c.linker.script.477531566" name="Linker Script (-T)" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.linker.script" useByScannerDiscovery="false" value="${ProjDirPath}\..\ostc4\Small_CPU\CPU2-RTE.ld" valueType="string"/> <option id="gnu.c.link.option.nodeflibs.1006660034" name="Do not use default libraries (-nodefaultlibs)" superClass="gnu.c.link.option.nodeflibs" useByScannerDiscovery="false" value="false" valueType="boolean"/> <inputType id="cdt.managedbuild.tool.gnu.c.linker.input.1337752943" superClass="cdt.managedbuild.tool.gnu.c.linker.input"> <additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/> <additionalInput kind="additionalinput" paths="$(LIBS)"/> </inputType> </tool> <tool id="fr.ac6.managedbuild.tool.gnu.cross.cpp.linker.310177802" name="MCU G++ Linker" superClass="fr.ac6.managedbuild.tool.gnu.cross.cpp.linker"/> <tool id="fr.ac6.managedbuild.tool.gnu.archiver.1360710289" name="MCU GCC Archiver" superClass="fr.ac6.managedbuild.tool.gnu.archiver"/> <tool id="fr.ac6.managedbuild.tool.gnu.cross.assembler.exe.release.2054790329" name="MCU GCC Assembler" superClass="fr.ac6.managedbuild.tool.gnu.cross.assembler.exe.release"> <inputType id="cdt.managedbuild.tool.gnu.assembler.input.374478413" superClass="cdt.managedbuild.tool.gnu.assembler.input"/> <inputType id="fr.ac6.managedbuild.tool.gnu.cross.assembler.input.1353421818" superClass="fr.ac6.managedbuild.tool.gnu.cross.assembler.input"/> </tool> </toolChain> </folderInfo> <sourceEntries> <entry excluding="Drivers/STM32F4xx/Source/Templates/system_stm32f4xx.c|Drivers/STM32F4xx/Source/Templates/iar|Drivers/STM32F4xx/Source/Templates/gcc|Drivers/STM32F4xx/Source/Templates/arm|Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_timebase_tim_template.c|Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_timebase_rtc_wakeup_template.c|Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_timebase_rtc_alarm_template.c|Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_msp_template.c|Drivers/STM32F4xx_v220/Source/Templates|Drivers/STM32F4xx_HAL_DRIVER_v120/Src/stm32f4xx_hal_msp_template.c" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Common"/> <entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Small_CPU"/> </sourceEntries> </configuration> </storageModule> <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/> </cconfiguration> </storageModule> <storageModule moduleId="cdtBuildSystem" version="4.0.0"> <project id="OSTC4_RTE.fr.ac6.managedbuild.target.gnu.cross.exe.126223660" name="Executable" projectType="fr.ac6.managedbuild.target.gnu.cross.exe"/> </storageModule> <storageModule moduleId="scannerConfiguration"> <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/> <scannerConfigBuildInfo instanceId="fr.ac6.managedbuild.config.gnu.cross.exe.debug.2145655687;fr.ac6.managedbuild.config.gnu.cross.exe.debug.2145655687.;fr.ac6.managedbuild.tool.gnu.cross.c.compiler.1064816811;fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.c.2126749510"> <autodiscovery enabled="false" problemReportingEnabled="true" selectedProfileId=""/> </scannerConfigBuildInfo> <scannerConfigBuildInfo instanceId="fr.ac6.managedbuild.config.gnu.cross.exe.release.1176875035;fr.ac6.managedbuild.config.gnu.cross.exe.release.1176875035.;fr.ac6.managedbuild.tool.gnu.cross.c.compiler.1223896604;fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.c.925384553"> <autodiscovery enabled="false" problemReportingEnabled="true" selectedProfileId=""/> </scannerConfigBuildInfo> </storageModule> <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/> <storageModule moduleId="refreshScope" versionNumber="2"> <configuration configurationName="Multiple configurations"> <resource resourceType="PROJECT" workspacePath="/OSTC4_RTE"/> </configuration> <configuration configurationName="Debug"> <resource resourceType="PROJECT" workspacePath="/OSTC4_RTE"/> </configuration> <configuration configurationName="Release"> <resource resourceType="PROJECT" workspacePath="/OSTC4_RTE"/> </configuration> </storageModule> <storageModule moduleId="org.eclipse.cdt.make.core.buildtargets"/> <storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/> </cproject>