Mercurial > public > ostc4
view Documentations/dump-disc.cfg @ 400:7bcbbaa42cbf ImproveBluetooth
Added retry through power off/on cycle:
During tests sometime (<10%) the initialization of the module failed which was visible due to a deactivated Bluetooth option. Manual activation was always successfull. To improve the startup behavior a retry by using a module power off / on cycle has been added
author | ideenmodellierer |
---|---|
date | Sat, 28 Dec 2019 19:42:04 +0100 |
parents | 01cc5959f199 |
children |
line wrap: on
line source
#! openocd -f # Define the prob used: source [find interface/stlink-v2.cfg] set WORKAREASIZE 0x8000 transport select hla_swd # Reset options set ENABLE_LOW_POWER 1 set STOP_WATCHDOG 1 reset_config srst_only srst_nogate connect_assert_srst # Seelct the right chip set CHIPNAME stm32f427IIT6 set CONNECT_UNDER_RESET 1 source [find target/stm32f4x.cfg] # Allow to continue execution after a connection: init_reset run puts "Flash banks:" flash banks #puts "Reading FIRMWARE..." # Requires OpenOCD 0.10.0 / released January 2017 ? #flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000 #puts "Done." exit