Mercurial > public > ostc4
view Common/Drivers/STM32F4xx_HAL_DRIVER_v120/Inc/stm32f4xx_hal_dma2d.h @ 114:79b19d56ab08 FlipDisplay
Eliminate warnings
author | Ideenmodellierer |
---|---|
date | Thu, 03 Jan 2019 18:35:11 +0100 |
parents | 5f11787b4f42 |
children |
line wrap: on
line source
/** ****************************************************************************** * @file stm32f4xx_hal_dma2d.h * @author MCD Application Team * @version V1.2.0 * @date 26-December-2014 * @brief Header file of DMA2D HAL module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_DMA2D_H #define __STM32F4xx_HAL_DMA2D_H #ifdef __cplusplus extern "C" { #endif #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal_def.h" /** @addtogroup STM32F4xx_HAL_Driver * @{ */ /** @defgroup DMA2D DMA2D * @brief DMA2D HAL module driver * @{ */ /* Exported types ------------------------------------------------------------*/ /** @defgroup DMA2D_Exported_Types DMA2D Exported Types * @{ */ #define MAX_DMA2D_LAYER 2 /** * @brief DMA2D color Structure definition */ typedef struct { uint32_t Blue; /*!< Configures the blue value. This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */ uint32_t Green; /*!< Configures the green value. This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */ uint32_t Red; /*!< Configures the red value. This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */ } DMA2D_ColorTypeDef; /** * @brief DMA2D CLUT Structure definition */ typedef struct { uint32_t *pCLUT; /*!< Configures the DMA2D CLUT memory address.*/ uint32_t CLUTColorMode; /*!< configures the DMA2D CLUT color mode. This parameter can be one value of @ref DMA2D_CLUT_CM */ uint32_t Size; /*!< configures the DMA2D CLUT size. This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.*/ } DMA2D_CLUTCfgTypeDef; /** * @brief DMA2D Init structure definition */ typedef struct { uint32_t Mode; /*!< configures the DMA2D transfer mode. This parameter can be one value of @ref DMA2D_Mode */ uint32_t ColorMode; /*!< configures the color format of the output image. This parameter can be one value of @ref DMA2D_Color_Mode */ uint32_t OutputOffset; /*!< Specifies the Offset value. This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. */ } DMA2D_InitTypeDef; /** * @brief DMA2D Layer structure definition */ typedef struct { uint32_t InputOffset; /*!< configures the DMA2D foreground offset. This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. */ uint32_t InputColorMode; /*!< configures the DMA2D foreground color mode . This parameter can be one value of @ref DMA2D_Input_Color_Mode */ uint32_t AlphaMode; /*!< configures the DMA2D foreground alpha mode. This parameter can be one value of @ref DMA2D_ALPHA_MODE */ uint32_t InputAlpha; /*!< Specifies the DMA2D foreground alpha value and color value in case of A8 or A4 color mode. This parameter must be a number between Min_Data = 0x00000000 and Max_Data = 0xFFFFFFFF in case of A8 or A4 color mode (ARGB). Otherwise, This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.*/ } DMA2D_LayerCfgTypeDef; /** * @brief HAL DMA2D State structures definition */ typedef enum { HAL_DMA2D_STATE_RESET = 0x00, /*!< DMA2D not yet initialized or disabled */ HAL_DMA2D_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ HAL_DMA2D_STATE_BUSY = 0x02, /*!< an internal process is ongoing */ HAL_DMA2D_STATE_TIMEOUT = 0x03, /*!< Timeout state */ HAL_DMA2D_STATE_ERROR = 0x04, /*!< DMA2D state error */ HAL_DMA2D_STATE_SUSPEND = 0x05 /*!< DMA2D process is suspended */ }HAL_DMA2D_StateTypeDef; /** * @brief DMA2D handle Structure definition */ typedef struct __DMA2D_HandleTypeDef { DMA2D_TypeDef *Instance; /*!< DMA2D Register base address */ DMA2D_InitTypeDef Init; /*!< DMA2D communication parameters */ void (* XferCpltCallback)(struct __DMA2D_HandleTypeDef * hdma2d); /*!< DMA2D transfer complete callback */ void (* XferErrorCallback)(struct __DMA2D_HandleTypeDef * hdma2d); /*!< DMA2D transfer error callback */ DMA2D_LayerCfgTypeDef LayerCfg[MAX_DMA2D_LAYER]; /*!< DMA2D Layers parameters */ HAL_LockTypeDef Lock; /*!< DMA2D Lock */ __IO HAL_DMA2D_StateTypeDef State; /*!< DMA2D transfer state */ __IO uint32_t ErrorCode; /*!< DMA2D Error code */ } DMA2D_HandleTypeDef; /** * @} */ /* Exported constants --------------------------------------------------------*/ /** @defgroup DMA2D_Exported_Constants DMA2D Exported Constants * @{ */ /** @defgroup DMA2D_Error_Code DMA2D Error Code * @{ */ #define HAL_DMA2D_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ #define HAL_DMA2D_ERROR_TE ((uint32_t)0x00000001) /*!< Transfer error */ #define HAL_DMA2D_ERROR_CE ((uint32_t)0x00000002) /*!< Configuration error */ #define HAL_DMA2D_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */ /** * @} */ /** @defgroup DMA2D_Mode DMA2D Mode * @{ */ #define DMA2D_M2M ((uint32_t)0x00000000) /*!< DMA2D memory to memory transfer mode */ #define DMA2D_M2M_PFC ((uint32_t)0x00010000) /*!< DMA2D memory to memory with pixel format conversion transfer mode */ #define DMA2D_M2M_BLEND ((uint32_t)0x00020000) /*!< DMA2D memory to memory with blending transfer mode */ #define DMA2D_R2M ((uint32_t)0x00030000) /*!< DMA2D register to memory transfer mode */ /** * @} */ /** @defgroup DMA2D_Color_Mode DMA2D Color Mode * @{ */ #define DMA2D_ARGB8888 ((uint32_t)0x00000000) /*!< ARGB8888 DMA2D color mode */ #define DMA2D_RGB888 ((uint32_t)0x00000001) /*!< RGB888 DMA2D color mode */ #define DMA2D_RGB565 ((uint32_t)0x00000002) /*!< RGB565 DMA2D color mode */ #define DMA2D_ARGB1555 ((uint32_t)0x00000003) /*!< ARGB1555 DMA2D color mode */ #define DMA2D_ARGB4444 ((uint32_t)0x00000004) /*!< ARGB4444 DMA2D color mode */ /** * @} */ /** @defgroup DMA2D_COLOR_VALUE DMA2D COLOR VALUE * @{ */ #define COLOR_VALUE ((uint32_t)0x000000FF) /*!< color value mask */ /** * @} */ /** @defgroup DMA2D_SIZE DMA2D SIZE * @{ */ #define DMA2D_PIXEL (DMA2D_NLR_PL >> 16) /*!< DMA2D pixel per line */ #define DMA2D_LINE DMA2D_NLR_NL /*!< DMA2D number of line */ /** * @} */ /** @defgroup DMA2D_Offset DMA2D Offset * @{ */ #define DMA2D_OFFSET DMA2D_FGOR_LO /*!< Line Offset */ /** * @} */ /** @defgroup DMA2D_Input_Color_Mode DMA2D Input Color Mode * @{ */ #define CM_ARGB8888 ((uint32_t)0x00000000) /*!< ARGB8888 color mode */ #define CM_RGB888 ((uint32_t)0x00000001) /*!< RGB888 color mode */ #define CM_RGB565 ((uint32_t)0x00000002) /*!< RGB565 color mode */ #define CM_ARGB1555 ((uint32_t)0x00000003) /*!< ARGB1555 color mode */ #define CM_ARGB4444 ((uint32_t)0x00000004) /*!< ARGB4444 color mode */ #define CM_L8 ((uint32_t)0x00000005) /*!< L8 color mode */ #define CM_AL44 ((uint32_t)0x00000006) /*!< AL44 color mode */ #define CM_AL88 ((uint32_t)0x00000007) /*!< AL88 color mode */ #define CM_L4 ((uint32_t)0x00000008) /*!< L4 color mode */ #define CM_A8 ((uint32_t)0x00000009) /*!< A8 color mode */ #define CM_A4 ((uint32_t)0x0000000A) /*!< A4 color mode */ /** * @} */ /** @defgroup DMA2D_ALPHA_MODE DMA2D ALPHA MODE * @{ */ #define DMA2D_NO_MODIF_ALPHA ((uint32_t)0x00000000) /*!< No modification of the alpha channel value */ #define DMA2D_REPLACE_ALPHA ((uint32_t)0x00000001) /*!< Replace original alpha channel value by programmed alpha value */ #define DMA2D_COMBINE_ALPHA ((uint32_t)0x00000002) /*!< Replace original alpha channel value by programmed alpha value with original alpha channel value */ /** * @} */ /** @defgroup DMA2D_CLUT_CM DMA2D CLUT CM * @{ */ #define DMA2D_CCM_ARGB8888 ((uint32_t)0x00000000) /*!< ARGB8888 DMA2D C-LUT color mode */ #define DMA2D_CCM_RGB888 ((uint32_t)0x00000001) /*!< RGB888 DMA2D C-LUT color mode */ /** * @} */ /** @defgroup DMA2D_Size_Clut DMA2D Size Clut * @{ */ #define DMA2D_CLUT_SIZE (DMA2D_FGPFCCR_CS >> 8) /*!< DMA2D C-LUT size */ /** * @} */ /** @defgroup DMA2D_DeadTime DMA2D DeadTime * @{ */ #define LINE_WATERMARK DMA2D_LWR_LW /** * @} */ /** @defgroup DMA2D_Interrupts DMA2D Interrupts * @{ */ #define DMA2D_IT_CE DMA2D_CR_CEIE /*!< Configuration Error Interrupt */ #define DMA2D_IT_CTC DMA2D_CR_CTCIE /*!< C-LUT Transfer Complete Interrupt */ #define DMA2D_IT_CAE DMA2D_CR_CAEIE /*!< C-LUT Access Error Interrupt */ #define DMA2D_IT_TW DMA2D_CR_TWIE /*!< Transfer Watermark Interrupt */ #define DMA2D_IT_TC DMA2D_CR_TCIE /*!< Transfer Complete Interrupt */ #define DMA2D_IT_TE DMA2D_CR_TEIE /*!< Transfer Error Interrupt */ /** * @} */ /** @defgroup DMA2D_Flag DMA2D Flag * @{ */ #define DMA2D_FLAG_CE DMA2D_ISR_CEIF /*!< Configuration Error Interrupt Flag */ #define DMA2D_FLAG_CTC DMA2D_ISR_CTCIF /*!< C-LUT Transfer Complete Interrupt Flag */ #define DMA2D_FLAG_CAE DMA2D_ISR_CAEIF /*!< C-LUT Access Error Interrupt Flag */ #define DMA2D_FLAG_TW DMA2D_ISR_TWIF /*!< Transfer Watermark Interrupt Flag */ #define DMA2D_FLAG_TC DMA2D_ISR_TCIF /*!< Transfer Complete Interrupt Flag */ #define DMA2D_FLAG_TE DMA2D_ISR_TEIF /*!< Transfer Error Interrupt Flag */ /** * @} */ /** * @} */ /* Exported macro ------------------------------------------------------------*/ /** @defgroup DMA2D_Exported_Macros DMA2D Exported Macros * @{ */ /** @brief Reset DMA2D handle state * @param __HANDLE__: specifies the DMA2D handle. * @retval None */ #define __HAL_DMA2D_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA2D_STATE_RESET) /** * @brief Enable the DMA2D. * @param __HANDLE__: DMA2D handle * @retval None. */ #define __HAL_DMA2D_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DMA2D_CR_START) /** * @brief Disable the DMA2D. * @param __HANDLE__: DMA2D handle * @retval None. */ #define __HAL_DMA2D_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~DMA2D_CR_START) /* Interrupt & Flag management */ /** * @brief Get the DMA2D pending flags. * @param __HANDLE__: DMA2D handle * @param __FLAG__: Get the specified flag. * This parameter can be any combination of the following values: * @arg DMA2D_FLAG_CE: Configuration error flag * @arg DMA2D_FLAG_CTC: C-LUT transfer complete flag * @arg DMA2D_FLAG_CAE: C-LUT access error flag * @arg DMA2D_FLAG_TW: Transfer Watermark flag * @arg DMA2D_FLAG_TC: Transfer complete flag * @arg DMA2D_FLAG_TE: Transfer error flag * @retval The state of FLAG. */ #define __HAL_DMA2D_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__)) /** * @brief Clears the DMA2D pending flags. * @param __HANDLE__: DMA2D handle * @param __FLAG__: specifies the flag to clear. * This parameter can be any combination of the following values: * @arg DMA2D_FLAG_CE: Configuration error flag * @arg DMA2D_FLAG_CTC: C-LUT transfer complete flag * @arg DMA2D_FLAG_CAE: C-LUT access error flag * @arg DMA2D_FLAG_TW: Transfer Watermark flag * @arg DMA2D_FLAG_TC: Transfer complete flag * @arg DMA2D_FLAG_TE: Transfer error flag * @retval None */ #define __HAL_DMA2D_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->IFCR = (__FLAG__)) /** * @brief Enables the specified DMA2D interrupts. * @param __HANDLE__: DMA2D handle * @param __INTERRUPT__: specifies the DMA2D interrupt sources to be enabled. * This parameter can be any combination of the following values: * @arg DMA2D_IT_CE: Configuration error interrupt mask * @arg DMA2D_IT_CTC: C-LUT transfer complete interrupt mask * @arg DMA2D_IT_CAE: C-LUT access error interrupt mask * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask * @arg DMA2D_IT_TC: Transfer complete interrupt mask * @arg DMA2D_IT_TE: Transfer error interrupt mask * @retval None */ #define __HAL_DMA2D_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) /** * @brief Disables the specified DMA2D interrupts. * @param __HANDLE__: DMA2D handle * @param __INTERRUPT__: specifies the DMA2D interrupt sources to be disabled. * This parameter can be any combination of the following values: * @arg DMA2D_IT_CE: Configuration error interrupt mask * @arg DMA2D_IT_CTC: C-LUT transfer complete interrupt mask * @arg DMA2D_IT_CAE: C-LUT access error interrupt mask * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask * @arg DMA2D_IT_TC: Transfer complete interrupt mask * @arg DMA2D_IT_TE: Transfer error interrupt mask * @retval None */ #define __HAL_DMA2D_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) /** * @brief Checks whether the specified DMA2D interrupt has occurred or not. * @param __HANDLE__: DMA2D handle * @param __INTERRUPT__: specifies the DMA2D interrupt source to check. * This parameter can be one of the following values: * @arg DMA2D_IT_CE: Configuration error interrupt mask * @arg DMA2D_IT_CTC: C-LUT transfer complete interrupt mask * @arg DMA2D_IT_CAE: C-LUT access error interrupt mask * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask * @arg DMA2D_IT_TC: Transfer complete interrupt mask * @arg DMA2D_IT_TE: Transfer error interrupt mask * @retval The state of INTERRUPT. */ #define __HAL_DMA2D_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR & (__INTERRUPT__)) /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @defgroup DMA2D_Exported_Functions DMA2D Exported Functions * @{ */ /* Initialization and de-initialization functions *******************************/ HAL_StatusTypeDef HAL_DMA2D_Init(DMA2D_HandleTypeDef *hdma2d); HAL_StatusTypeDef HAL_DMA2D_DeInit (DMA2D_HandleTypeDef *hdma2d); void HAL_DMA2D_MspInit(DMA2D_HandleTypeDef* hdma2d); void HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef* hdma2d); /* IO operation functions *******************************************************/ HAL_StatusTypeDef HAL_DMA2D_Start(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height); HAL_StatusTypeDef HAL_DMA2D_BlendingStart(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width, uint32_t Height); HAL_StatusTypeDef HAL_DMA2D_Start_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height); HAL_StatusTypeDef HAL_DMA2D_BlendingStart_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width, uint32_t Height); HAL_StatusTypeDef HAL_DMA2D_Suspend(DMA2D_HandleTypeDef *hdma2d); HAL_StatusTypeDef HAL_DMA2D_Resume(DMA2D_HandleTypeDef *hdma2d); HAL_StatusTypeDef HAL_DMA2D_Abort(DMA2D_HandleTypeDef *hdma2d); HAL_StatusTypeDef HAL_DMA2D_PollForTransfer(DMA2D_HandleTypeDef *hdma2d, uint32_t Timeout); void HAL_DMA2D_IRQHandler(DMA2D_HandleTypeDef *hdma2d); /* Peripheral Control functions *************************************************/ HAL_StatusTypeDef HAL_DMA2D_ConfigLayer(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx); HAL_StatusTypeDef HAL_DMA2D_ConfigCLUT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx); HAL_StatusTypeDef HAL_DMA2D_EnableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx); HAL_StatusTypeDef HAL_DMA2D_DisableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx); HAL_StatusTypeDef HAL_DMA2D_ProgramLineEvent(DMA2D_HandleTypeDef *hdma2d, uint32_t Line); /* Peripheral State functions ***************************************************/ HAL_DMA2D_StateTypeDef HAL_DMA2D_GetState(DMA2D_HandleTypeDef *hdma2d); uint32_t HAL_DMA2D_GetError(DMA2D_HandleTypeDef *hdma2d); /** * @} */ /* Private types -------------------------------------------------------------*/ /** @defgroup DMA2D_Private_Types DMA2D Private Types * @{ */ /** * @} */ /* Private defines -------------------------------------------------------------*/ /** @defgroup DMA2D_Private_Defines DMA2D Private Defines * @{ */ /** * @} */ /* Private variables ---------------------------------------------------------*/ /** @defgroup DMA2D_Private_Variables DMA2D Private Variables * @{ */ /** * @} */ /* Private constants ---------------------------------------------------------*/ /** @defgroup DMA2D_Private_Constants DMA2D Private Constants * @{ */ /** * @} */ /* Private macros ------------------------------------------------------------*/ /** @defgroup DMA2D_Private_Macros DMA2D Private Macros * @{ */ #define IS_DMA2D_LAYER(LAYER) ((LAYER) <= MAX_DMA2D_LAYER) #define IS_DMA2D_MODE(MODE) (((MODE) == DMA2D_M2M) || ((MODE) == DMA2D_M2M_PFC) || \ ((MODE) == DMA2D_M2M_BLEND) || ((MODE) == DMA2D_R2M)) #define IS_DMA2D_CMODE(MODE_ARGB) (((MODE_ARGB) == DMA2D_ARGB8888) || ((MODE_ARGB) == DMA2D_RGB888) || \ ((MODE_ARGB) == DMA2D_RGB565) || ((MODE_ARGB) == DMA2D_ARGB1555) || \ ((MODE_ARGB) == DMA2D_ARGB4444)) #define IS_DMA2D_COLOR(COLOR) ((COLOR) <= COLOR_VALUE) #define IS_DMA2D_LINE(LINE) ((LINE) <= DMA2D_LINE) #define IS_DMA2D_PIXEL(PIXEL) ((PIXEL) <= DMA2D_PIXEL) #define IS_DMA2D_OFFSET(OOFFSET) ((OOFFSET) <= DMA2D_OFFSET) #define IS_DMA2D_INPUT_COLOR_MODE(INPUT_CM) (((INPUT_CM) == CM_ARGB8888) || ((INPUT_CM) == CM_RGB888) || \ ((INPUT_CM) == CM_RGB565) || ((INPUT_CM) == CM_ARGB1555) || \ ((INPUT_CM) == CM_ARGB4444) || ((INPUT_CM) == CM_L8) || \ ((INPUT_CM) == CM_AL44) || ((INPUT_CM) == CM_AL88) || \ ((INPUT_CM) == CM_L4) || ((INPUT_CM) == CM_A8) || \ ((INPUT_CM) == CM_A4)) #define IS_DMA2D_ALPHA_MODE(AlphaMode) (((AlphaMode) == DMA2D_NO_MODIF_ALPHA) || \ ((AlphaMode) == DMA2D_REPLACE_ALPHA) || \ ((AlphaMode) == DMA2D_COMBINE_ALPHA)) #define IS_DMA2D_CLUT_CM(CLUT_CM) (((CLUT_CM) == DMA2D_CCM_ARGB8888) || ((CLUT_CM) == DMA2D_CCM_RGB888)) #define IS_DMA2D_CLUT_SIZE(CLUT_SIZE) ((CLUT_SIZE) <= DMA2D_CLUT_SIZE) #define IS_DMA2D_LineWatermark(LineWatermark) ((LineWatermark) <= LINE_WATERMARK) /** * @} */ /* Private functions prototypes ---------------------------------------------------------*/ /** @defgroup DMA2D_Private_Functions_Prototypes DMA2D Private Functions Prototypes * @{ */ /** * @} */ /* Private functions ---------------------------------------------------------*/ /** @defgroup DMA2D_Private_Functions DMA2D Private Functions * @{ */ /** * @} */ /** * @} */ /** * @} */ #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ #ifdef __cplusplus } #endif #endif /* __STM32F4xx_HAL_DMA2D_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/