view Documentations/dump-disc.cfg @ 796:75ace7af8212

Expanded Sensor map structure: In the previous version the number of possible sensors were set to 5 based on the assumption that ADC slots are shared with digital O2 sensors. As result three of five slots would have been limited to O2 measurement usecase, leaving just two slots left for other sensors (e.g. CO2). In order to have as much flexibility (and less risk for data structure changes) the number of sensors has been set to 7 (3 ADC + 4 UART MUX)
author Ideenmodellierer
date Mon, 31 Jul 2023 20:00:06 +0200
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f427IIT6
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

puts "Flash banks:"
flash banks

#puts "Reading FIRMWARE..."
# Requires OpenOCD 0.10.0 / released January 2017 ?
#flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000

#puts "Done."
exit