view Small_CPU/Inc/uartProtocol_GNSS.h @ 1040:74be24428049 GasConsumption

Bugfix Fontpack update for large blocks: The update of a font pack with a size > 768000 byte was interrupted and a manuel switch to bootloader had to be performed to get the font pack flashed. Rootcause was a missing address adjustment during the block read back function which caused a false error detection. Blocks > 768000 are read in two step while only one buffer is used for comparation. To fill the correct data into this buffer a dummy read of the flash data was added to get the data pointers to the correct offset. Another bug was regardings the read back itself where only the first byte was checked. After array indexing the complete buffer is noch verified.
author Ideenmodellierer
date Mon, 13 Oct 2025 20:54:25 +0200
parents efb7d18cc564
children
line wrap: on
line source

/**
  ******************************************************************************
  * @file    uartProtocol_GNSS.h
  * @author  heinrichs weikamp gmbh
  * @version V0.0.1
  * @date    30-Sep-2024
  * @brief	 Interface functionality for operation of gnss devices
  *
  @verbatim
  ==============================================================================
                        ##### How to use #####
  ==============================================================================
  @endverbatim
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2014 heinrichs weikamp</center></h2>
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef UART_PROTOCOL_GNSS_H
#define UART_PROTOCOL_GNSS_H

#ifdef __cplusplus
 extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "configuration.h"
#include "stm32f4xx_hal.h"

 typedef enum
  {
		UART_GNSS_INIT = 0,		/* Default Status for every sensor type */
		UART_GNSS_IDLE,			/* sensor detected and no communication pending */
		UART_GNSS_ERROR,		/* Error message received from sensor */
		UART_GNSS_WARMUP = 10,
		UART_GNSS_INACTIVE,		/* no requests to the receiver */
		UART_GNSS_LOADCONF_0,
		UART_GNSS_LOADCONF_1,
		UART_GNSS_LOADCONF_2,
		UART_GNSS_SETMODE_MOBILE,
		UART_GNSS_SETDATE_TIME,
		UART_GNSS_SET_POSITION,
		UART_GNSS_PWRDOWN,
		UART_GNSS_PWRUP,
		UART_GNSS_SETCONF,		/* save configuration */
		UART_GNSS_GET_PVT,
		UART_GNSS_GET_SAT
  } uartGnssStatus_t;

  typedef enum
  {
  	GNSSRX_READY = 0,			/* Initial state */
	GNSSRX_DETECT_HEADER_0,
	GNSSRX_DETECT_HEADER_1,
	GNSSRX_DETECT_HEADER_2,
	GNSSRX_DETECT_HEADER_3,
	GNSSRX_DETECT_LENGTH_0,
	GNSSRX_DETECT_LENGTH_1,
	GNSSRX_DETECT_ACK_0,
	GNSSRX_DETECT_ACK_1,
	GNSSRX_DETECT_ACK_2,
	GNSSRX_DETECT_ACK_3,
	GNSSRX_READ_DATA,
	GNSSRX_READ_CK_A,
	GNSSRX_READ_CK_B,
  } receiveStateGnss_t;


  typedef enum
  {
  	GNSSCMD_LOADCONF_0 = 0,
	GNSSCMD_LOADCONF_1,
	GNSSCMD_LOADCONF_2,
	GNSSCMD_SETMOBILE,
	GNSSCMD_SETDATETIME,
	GNSSCMD_SET_POSITION,
	GNSSCMD_MODE_PWS,
	GNSSCMD_MODE_NORMAL,
	GNSSCMD_SET_CONFIG,
	GNSSCMD_GET_NAV_DATA,
	GNSSCMD_GET_PVT_DATA,
	GNSSCMD_GET_POSLLH_DATA,
	GNSSCMD_GET_NAVSAT_DATA
  } gnssSensorCmd_t;

  typedef struct
  {
    uint8_t class;
    uint8_t id;
  } gnssRequest_s;

void uartGnss_ReqPowerDown(uint8_t request);
uint8_t uartGnss_isPowerDownRequested(void);
uartGnssStatus_t uartGnss_GetState(void);
void uartGnss_SetState(uartGnssStatus_t newState);
void uartGnss_Control(void);
void uartGnss_ProcessData(uint8_t data);
uint8_t uartGnss_isSensorConnected();
void uartGnss_SendCmd(uint8_t GnssCmd);

#endif /* UART_PROTOCOL_GNSS_H */