view ostc4pack/src/checksum_final_add_fletcher.cpp @ 503:734f7ad46bca

Bugfix display of disabled screen. It is possible to select a screen as default which is in parallel disabled in the selection view. To avoid this the enable / disable state is not also checked when entering dive mode. The check function was depending on an ACTION. The functionality has been changed to allow the function call without ACTION. Changed setting of compass circle position from constant position to variable This was needed to reuse the same function in several views with different compass position Added new views Navigation and Depth data Both views were basically already available but the idea behind the layout is to combine all information needed for navigation dives (compass + timer) in one view. The classic maxdepth view just showed the maxdepth with a black box on the right side. this box is now used for display of average depth (shown in classic view Stopwatch) Minor changes in compass paint function to improve code readability Use same Y offset for all views While switching across the views some number were shown ~20 pixel higher than others. This was caused by the usage of the line selection which works for some fonts but not for all => set linenumber to 0 for all views
author Ideenmodellierer
date Mon, 24 Aug 2020 19:53:27 +0200
parents 1e707b34667e
children 01f40cb1057e
line wrap: on
line source

#include <iostream>
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <time.h>

void fletcher16(unsigned char *result1, unsigned char *result2, unsigned char const *data, size_t bytes )
{
        unsigned short sum1 = 0xff, sum2 = 0xff;
        size_t tlen;
 
        while (bytes) {
                tlen = bytes >= 20 ? 20 : bytes;
                bytes -= tlen;
                do {
                        sum2 += sum1 += *data++;
                } while (--tlen);
                sum1 = (sum1 & 0xff) + (sum1 >> 8);
                sum2 = (sum2 & 0xff) + (sum2 >> 8);
        }
        /* Second reduction step to reduce sums to 8 bits */
        sum1 = (sum1 & 0xff) + (sum1 >> 8);
        sum2 = (sum2 & 0xff) + (sum2 >> 8);
        *result2 = (sum2 & 0xff);
        *result1 = (sum1 & 0xff);
//        return sum2 << 8 | sum1;
}


// This is a variant of fletcher16 with a 16 bit sum instead of an 8 bit sum,
// and modulo 2^16 instead of 2^16-1
void
hw_ostc3_firmware_checksum (unsigned char *result1, unsigned char *result2, unsigned char *result3, unsigned char *result4, unsigned char const *data, size_t bytes )
{
	unsigned short low = 0;
	unsigned short high = 0;
	for (unsigned int i = 0; i < bytes; i++) {
		low  += data[i];
		high += low;
	}
        *result1 = (low & 0xff);
        *result2 = (low/256 & 0xff);
        *result3 = (unsigned char)(high & 0xff);
        *result4 = (unsigned char)((high/256) & 0xff);
//	return (((unsigned int)high) << 16) + low;
}


int main(int argc, char** argv) {
	
	
	FILE *fp, * fpout;
	size_t lenTotal,lenTemp;
	unsigned char buf[2000000];
	char *file = argv[1];
	char *file2 =  argv[2];
	char *file3 =  argv[3];
	unsigned int pruefsumme;
	unsigned char buf2[4];

   	printf("1: %s\n",  file);
   	printf("2: %s\n",  file2);
   	printf("3: %s\n",  file3);
   	printf("\n");
     
	
		//write File with length and cheksum
	char filename[500], filenameout[510] ;
	sprintf(filename,"%s",file);
	int filelength = strlen(filename);
	filename[filelength -4] = 0;
	
	lenTotal = 0;
	if (NULL == (fp = fopen(file, "rb")))
	{
	    printf("Unable to open %s for reading\n", file);
	    return -1;
	}
	lenTemp = fread(&buf[lenTotal], sizeof(char), sizeof(buf), fp);
//	lenTemp = fread(buf, sizeof(char), sizeof(buf), fp);
	lenTotal = lenTemp;
	printf("%d bytes read (hex: %#x )\n", lenTemp,lenTemp);
	fclose(fp);

	if(file2)
	{
		if (NULL == (fp = fopen(file2, "rb")))
		{
		    printf("Unable to open %s for reading\n", file2);
		    return -1;
		}
		lenTemp = fread(&buf[lenTotal], sizeof(char), sizeof(buf)-lenTotal, fp);
		lenTotal += lenTemp;
		printf("%d bytes read (hex: %#x )\n", lenTemp,lenTemp);
		fclose(fp);
	}
	if(file3)
	{
		if (NULL == (fp = fopen(file3, "rb")))
		{
		    printf("Unable to open %s for reading\n", file3);
		    return -1;
		}
		lenTemp = fread(&buf[lenTotal], sizeof(char), sizeof(buf)-lenTotal, fp);
		lenTotal += lenTemp;
		printf("%d bytes read (hex: %#x )\n", lenTemp,lenTemp);
		fclose(fp);
	}

   	printf("\n");
	printf("%d bytes read (hex: %#x ) total \n", lenTotal,lenTotal);

	time_t rawtime;
	time (&rawtime);
	struct tm *timeinfo;
	timeinfo = localtime(&rawtime);
	
//	sprintf(filenameout,"fwupdate_%s.bin",ctime(&rawtime));
	sprintf(filenameout,"OSTC4update_%02u%02u%02u.bin",timeinfo->tm_year-100,timeinfo->tm_mon+1,timeinfo->tm_mday);

    fpout = fopen(filenameout, "wb");     
    for(int i = 0;i <lenTotal;i++)
    {
    	if(fwrite(&buf[i],1,1,fpout) != 1)
     	printf("error writing\n");
	}
	
	hw_ostc3_firmware_checksum(&buf2[0],&buf2[1],&buf2[2],&buf2[3],buf,lenTotal);
	printf("checksum  %#x %#x %#x %#x\n", buf2[0],buf2[1], buf2[2], buf2[3]);
   	if(fwrite(&buf2[0],1,4,fpout) != 4)
    	printf("error writing checksum\n");
    ;
	fclose(fpout);
}