Mercurial > public > ostc4
view Discovery/Src/display.c @ 741:6a35e2e97bfb
Added button lock after wakeup in surface mode:
During setup of diveequipment the OSTC4 is sometimes operated unintended (e.g. while equipping the jaket). To avoid this it is now possible to activate a button lock in the button lock sensitivity menu. The OSTC4 will then wakeup as usuall but if the diver wants to oerate the menus he has to press the buttons in a certain order. The button to be pressed is indicated by a blue bar. The button lock is deactivated in dive mode.
author | Ideenmodellierer |
---|---|
date | Thu, 02 Feb 2023 17:35:54 +0100 |
parents | 5ca177d2df5d |
children | f7318457df4d |
line wrap: on
line source
#include "stm32f4xx_hal.h" /* for HAL_Delay() */ #include "ostc.h" #include "display.h" #define ENABLE_EXTENDED_COMMANDS 0xB9 #define SET_POWER 0xB1 #define SLEEP_OUT 0x11 #define DISPLAY_INVERSION_OFF 0x20 #define MEMORY_ACCESS_ONTROL 0x36 #define INTERFACE_PIXEL_FORMAT 0x3A #define SET_RGB_INTERFACE_RELATED 0xB3 #define SET_DISPLAY_WAVEFORM 0xB4 #define SET_PANEL 0xCC #define SET_GAMMA_CURVE_RELATED 0xE0 #define DISPLAY_ON 0x29 #define DISPLAY_OFF 0x28 #define SLEEP_IN 0x10 static void Display_Error_Handler(void); void display_power_on__1_of_2__pre_RGB(void) { /* reset system */ HAL_GPIO_WritePin(DISPLAY_CSB_GPIO_PORT,DISPLAY_CSB_PIN,GPIO_PIN_SET); // chip select HAL_GPIO_WritePin(DISPLAY_RESETB_GPIO_PORT,DISPLAY_RESETB_PIN,GPIO_PIN_RESET); HAL_Delay(10); HAL_GPIO_WritePin(DISPLAY_RESETB_GPIO_PORT,DISPLAY_RESETB_PIN,GPIO_PIN_SET); HAL_Delay(10); /* RGB signals should be now for 2 frames or more (datasheet) */ } static void send(uint8_t *pData, uint16_t inputlength) { HAL_GPIO_WritePin(DISPLAY_CSB_GPIO_PORT,DISPLAY_CSB_PIN,GPIO_PIN_RESET); // chip select if(HAL_SPI_Transmit(&hspiDisplay,(uint8_t*)pData, inputlength, 10000) != HAL_OK) Display_Error_Handler(); while (HAL_SPI_GetState(&hspiDisplay) != HAL_SPI_STATE_READY) { } HAL_GPIO_WritePin(DISPLAY_CSB_GPIO_PORT,DISPLAY_CSB_PIN,GPIO_PIN_SET); // chip select } static uint16_t convert8to9to8(uint8_t *pInput, uint8_t *pOutput,uint16_t inputlength) { uint16_t outputlength; uint8_t readbit = 0x80;//0b1000000; uint8_t writebit = 0x40;//0b0100000; uint16_t i,j,k; outputlength = ((inputlength+7)/8)*9; for(i=0;i<outputlength;i++) pOutput[i] = 0; k = 0; for(i=0;i<inputlength;i++) { if(i != 0) { pOutput[k] |= writebit; // 9. bit writebit = writebit >> 1; if(writebit == 0) { writebit = 0x80; k++; } } for(j=0;j<8;j++) { if((pInput[i] & readbit) != 0) { pOutput[k] |= writebit; } readbit = readbit >> 1; if(readbit == 0) readbit = 0x80; writebit = writebit >> 1; if(writebit == 0) { writebit = 0x80; k++; } } } return outputlength; } void display_power_on__2_of_2__post_RGB(void) { uint8_t aTxBuffer[32]; uint8_t bTxBuffer[36]; uint16_t i,length; for(i=0;i<32;i++) aTxBuffer[i] = 0; for(i=0;i<36;i++) bTxBuffer[i] = 0; aTxBuffer[0] = ENABLE_EXTENDED_COMMANDS; aTxBuffer[1] = 0xFF; aTxBuffer[2] = 0x83; aTxBuffer[3] = 0x63; length = convert8to9to8((uint8_t*)aTxBuffer,(uint8_t*)bTxBuffer,4); send((uint8_t*)bTxBuffer, length); aTxBuffer[0] = SET_POWER; aTxBuffer[1] = 0x81; aTxBuffer[2] = 0x24; aTxBuffer[3] = 0x04; aTxBuffer[4] = 0x02; aTxBuffer[5] = 0x02; aTxBuffer[6] = 0x03; aTxBuffer[7] = 0x10; aTxBuffer[8] = 0x10; aTxBuffer[9] = 0x34; aTxBuffer[10] = 0x3C; aTxBuffer[11] = 0x3F; aTxBuffer[12] = 0x3F; length = convert8to9to8((uint8_t*)aTxBuffer,(uint8_t*)bTxBuffer,13); send((uint8_t*)bTxBuffer, length); aTxBuffer[0] = SLEEP_OUT; length = convert8to9to8((uint8_t*)aTxBuffer,(uint8_t*)bTxBuffer,1); send((uint8_t*)bTxBuffer, length); HAL_Delay(5+1); aTxBuffer[0] = DISPLAY_INVERSION_OFF; length = convert8to9to8((uint8_t*)aTxBuffer,(uint8_t*)bTxBuffer,1); send((uint8_t*)bTxBuffer, length); aTxBuffer[0] = MEMORY_ACCESS_ONTROL; aTxBuffer[1] = 0x00; length = convert8to9to8((uint8_t*)aTxBuffer,(uint8_t*)bTxBuffer,2); send((uint8_t*)bTxBuffer, length); aTxBuffer[0] = INTERFACE_PIXEL_FORMAT; aTxBuffer[1] = 0x70; length = convert8to9to8((uint8_t*)aTxBuffer,(uint8_t*)bTxBuffer,2); send((uint8_t*)bTxBuffer, length); HAL_Delay(120+20); aTxBuffer[0] = SET_POWER; aTxBuffer[1] = 0x78; aTxBuffer[2] = 0x24; aTxBuffer[3] = 0x04, aTxBuffer[4] = 0x02; aTxBuffer[5] = 0x02; aTxBuffer[6] = 0x03; aTxBuffer[7] = 0x10; aTxBuffer[8] = 0x10; aTxBuffer[9] = 0x34; aTxBuffer[10] = 0x3C; aTxBuffer[11] = 0x3F; aTxBuffer[12] = 0x3F; length = convert8to9to8((uint8_t*)aTxBuffer,(uint8_t*)bTxBuffer,13); send((uint8_t*)bTxBuffer, length); aTxBuffer[0] = SET_RGB_INTERFACE_RELATED; aTxBuffer[1] = 0x01; length = convert8to9to8((uint8_t*)aTxBuffer,(uint8_t*)bTxBuffer,2); send((uint8_t*)bTxBuffer, length); aTxBuffer[0] = SET_DISPLAY_WAVEFORM; aTxBuffer[1] = 0x00; aTxBuffer[2] = 0x08; aTxBuffer[3] = 0x56; aTxBuffer[4] = 0x07; aTxBuffer[5] = 0x01; aTxBuffer[6] = 0x01; aTxBuffer[7] = 0x4D; aTxBuffer[8] = 0x01; aTxBuffer[9] = 0x42; length = convert8to9to8((uint8_t*)aTxBuffer,(uint8_t*)bTxBuffer,10); send((uint8_t*)bTxBuffer, length); aTxBuffer[0] = SET_PANEL; aTxBuffer[1] = 0x0B; length = convert8to9to8((uint8_t*)aTxBuffer,(uint8_t*)bTxBuffer,2); send((uint8_t*)bTxBuffer, length); aTxBuffer[0] = SET_GAMMA_CURVE_RELATED; aTxBuffer[1] = 0x01; aTxBuffer[2] = 0x48; aTxBuffer[3] = 0x4D; aTxBuffer[4] = 0x4E; aTxBuffer[5] = 0x58; aTxBuffer[6] = 0xF6; aTxBuffer[7] = 0x0B; aTxBuffer[8] = 0x4E; aTxBuffer[9] = 0x12; aTxBuffer[10] = 0xD5; aTxBuffer[11] = 0x15; aTxBuffer[12] = 0x95; aTxBuffer[13] = 0x55; aTxBuffer[14] = 0x8E; aTxBuffer[15] = 0x11; aTxBuffer[16] = 0x01; aTxBuffer[17] = 0x48; aTxBuffer[18] = 0x4D; aTxBuffer[19] = 0x55; aTxBuffer[20] = 0x5F; aTxBuffer[21] = 0xFD; aTxBuffer[22] = 0x0A; aTxBuffer[23] = 0x4E; aTxBuffer[24] = 0x51; aTxBuffer[25] = 0xD3; aTxBuffer[26] = 0x17; aTxBuffer[27] = 0x95; aTxBuffer[28] = 0x96; aTxBuffer[29] = 0x4E; aTxBuffer[30] = 0x11; length = convert8to9to8((uint8_t*)aTxBuffer,(uint8_t*)bTxBuffer,31); send((uint8_t*)bTxBuffer, length); HAL_Delay(5+1); aTxBuffer[0] = DISPLAY_ON; length = convert8to9to8((uint8_t*)aTxBuffer,(uint8_t*)bTxBuffer,1); send((uint8_t*)bTxBuffer, length); } static void Display_Error_Handler(void) { while(1) { } }