view Common/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s.h @ 909:6902bb4b6b2e Evo_2_23

Define state of new GPIO out pins: Some new GPIO pins were initialized but not used. This may cause some random activations e.g. of the red debug LED. To avoid this the output levels are set to inactive levels (e.g. to LED_OFF)
author Ideenmodellierer
date Tue, 15 Oct 2024 19:07:19 +0200
parents c78bcbd5deda
children
line wrap: on
line source

/**
  ******************************************************************************
  * @file    stm32f4xx_hal_i2s.h
  * @author  MCD Application Team
  * @brief   Header file of I2S HAL module.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_I2S_H
#define __STM32F4xx_HAL_I2S_H

#ifdef __cplusplus
 extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"

/** @addtogroup STM32F4xx_HAL_Driver
  * @{
  */

/** @addtogroup I2S I2S
  * @{
  */

/* Exported types ------------------------------------------------------------*/
/** @defgroup I2S_Exported_Types I2S Exported Types
  * @{
  */

/**
  * @brief I2S Init structure definition
  */
typedef struct
{
  uint32_t Mode;            /*!< Specifies the I2S operating mode.
                                 This parameter can be a value of @ref I2S_Mode */

  uint32_t Standard;        /*!< Specifies the standard used for the I2S communication.
                                 This parameter can be a value of @ref I2S_Standard */

  uint32_t DataFormat;      /*!< Specifies the data format for the I2S communication.
                                 This parameter can be a value of @ref I2S_Data_Format */

  uint32_t MCLKOutput;      /*!< Specifies whether the I2S MCLK output is enabled or not.
                                 This parameter can be a value of @ref I2S_MCLK_Output */

  uint32_t AudioFreq;       /*!< Specifies the frequency selected for the I2S communication.
                                 This parameter can be a value of @ref I2S_Audio_Frequency */

  uint32_t CPOL;            /*!< Specifies the idle state of the I2S clock.
                                 This parameter can be a value of @ref I2S_Clock_Polarity */

  uint32_t ClockSource;     /*!< Specifies the I2S Clock Source.
                                 This parameter can be a value of @ref I2S_Clock_Source */

  uint32_t FullDuplexMode;  /*!< Specifies the I2S FullDuplex mode.
                                 This parameter can be a value of @ref I2S_FullDuplex_Mode */

}I2S_InitTypeDef;

/**
  * @brief  HAL State structures definition
  */
typedef enum
{
  HAL_I2S_STATE_RESET      = 0x00U,  /*!< I2S not yet initialized or disabled                */
  HAL_I2S_STATE_READY      = 0x01U,  /*!< I2S initialized and ready for use                  */
  HAL_I2S_STATE_BUSY       = 0x02U,  /*!< I2S internal process is ongoing                    */
  HAL_I2S_STATE_BUSY_TX    = 0x03U,  /*!< Data Transmission process is ongoing               */
  HAL_I2S_STATE_BUSY_RX    = 0x04U,  /*!< Data Reception process is ongoing                  */
  HAL_I2S_STATE_BUSY_TX_RX = 0x05U,  /*!< Data Transmission and Reception process is ongoing */
  HAL_I2S_STATE_TIMEOUT    = 0x06U,  /*!< I2S timeout state                                  */
  HAL_I2S_STATE_ERROR      = 0x07U   /*!< I2S error state                                    */

}HAL_I2S_StateTypeDef;

/**
  * @brief I2S handle Structure definition
  */
typedef struct __I2S_HandleTypeDef
{
  SPI_TypeDef                *Instance;    /*!< I2S registers base address        */

  I2S_InitTypeDef            Init;         /*!< I2S communication parameters      */

  uint16_t                   *pTxBuffPtr;  /*!< Pointer to I2S Tx transfer buffer */

  __IO uint16_t              TxXferSize;   /*!< I2S Tx transfer size              */

  __IO uint16_t              TxXferCount;  /*!< I2S Tx transfer Counter           */

  uint16_t                   *pRxBuffPtr;  /*!< Pointer to I2S Rx transfer buffer */

  __IO uint16_t              RxXferSize;   /*!< I2S Rx transfer size              */

  __IO uint16_t              RxXferCount;  /*!< I2S Rx transfer counter
                                              (This field is initialized at the
                                               same value as transfer size at the
                                               beginning of the transfer and
                                               decremented when a sample is received
                                               NbSamplesReceived = RxBufferSize-RxBufferCount) */

  void (*IrqHandlerISR)      (struct __I2S_HandleTypeDef *hi2s);   /*!< I2S function pointer on IrqHandler   */

  DMA_HandleTypeDef          *hdmatx;      /*!< I2S Tx DMA handle parameters      */

  DMA_HandleTypeDef          *hdmarx;      /*!< I2S Rx DMA handle parameters      */

  __IO HAL_LockTypeDef       Lock;         /*!< I2S locking object                */

  __IO HAL_I2S_StateTypeDef  State;        /*!< I2S communication state           */

  __IO uint32_t              ErrorCode;    /*!< I2S Error code
                                              This parameter can be a value of @ref I2S_ErrorCode */

}I2S_HandleTypeDef;
/**
  * @}
  */

/* Exported constants --------------------------------------------------------*/
/** @defgroup I2S_Exported_Constants I2S Exported Constants
  * @{
  */
/**
  * @defgroup  I2S_ErrorCode I2S Error Code
  * @{
  */
#define HAL_I2S_ERROR_NONE               (0x00000000U)  /*!< No error                    */
#define HAL_I2S_ERROR_TIMEOUT            (0x00000001U)  /*!< Timeout error               */
#define HAL_I2S_ERROR_OVR                (0x00000002U)  /*!< OVR error                   */
#define HAL_I2S_ERROR_UDR                (0x00000004U)  /*!< UDR error                   */
#define HAL_I2S_ERROR_DMA                (0x00000008U)  /*!< DMA transfer error          */
#define HAL_I2S_ERROR_PRESCALER          (0x00000010U)  /*!< Prescaler Calculation error */
/**
  * @}
  */

/** @defgroup I2S_Mode I2S Mode
  * @{
  */
#define I2S_MODE_SLAVE_TX                (0x00000000U)
#define I2S_MODE_SLAVE_RX                (0x00000100U)
#define I2S_MODE_MASTER_TX               (0x00000200U)
#define I2S_MODE_MASTER_RX               (0x00000300U)
/**
  * @}
  */

/** @defgroup I2S_Standard I2S Standard
  * @{
  */
#define I2S_STANDARD_PHILIPS             (0x00000000U)
#define I2S_STANDARD_MSB                 (0x00000010U)
#define I2S_STANDARD_LSB                 (0x00000020U)
#define I2S_STANDARD_PCM_SHORT           (0x00000030U)
#define I2S_STANDARD_PCM_LONG            (0x000000B0U)
/**
  * @}
  */

/** @defgroup I2S_Data_Format I2S Data Format
  * @{
  */
#define I2S_DATAFORMAT_16B               (0x00000000U)
#define I2S_DATAFORMAT_16B_EXTENDED      (0x00000001U)
#define I2S_DATAFORMAT_24B               (0x00000003U)
#define I2S_DATAFORMAT_32B               (0x00000005U)
/**
  * @}
  */

/** @defgroup I2S_MCLK_Output I2S Mclk Output
  * @{
  */
#define I2S_MCLKOUTPUT_ENABLE            SPI_I2SPR_MCKOE
#define I2S_MCLKOUTPUT_DISABLE          (0x00000000U)
/**
  * @}
  */

/** @defgroup I2S_Audio_Frequency I2S Audio Frequency
  * @{
  */
#define I2S_AUDIOFREQ_192K               (192000U)
#define I2S_AUDIOFREQ_96K                (96000U)
#define I2S_AUDIOFREQ_48K                (48000U)
#define I2S_AUDIOFREQ_44K                (44100U)
#define I2S_AUDIOFREQ_32K                (32000U)
#define I2S_AUDIOFREQ_22K                (22050U)
#define I2S_AUDIOFREQ_16K                (16000U)
#define I2S_AUDIOFREQ_11K                (11025U)
#define I2S_AUDIOFREQ_8K                 (8000U)
#define I2S_AUDIOFREQ_DEFAULT            (2U)
/**
  * @}
  */

/** @defgroup I2S_FullDuplex_Mode I2S FullDuplex Mode
  * @{
  */
#define I2S_FULLDUPLEXMODE_DISABLE                   (0x00000000U)
#define I2S_FULLDUPLEXMODE_ENABLE                    (0x00000001U)
/**
  * @}
  */

/** @defgroup I2S_Clock_Polarity  I2S Clock Polarity
  * @{
  */
#define I2S_CPOL_LOW                    (0x00000000U)
#define I2S_CPOL_HIGH                   (SPI_I2SCFGR_CKPOL)
/**
  * @}
  */

/** @defgroup I2S_Interrupts_Definition I2S Interrupts Definition
  * @{
  */
#define I2S_IT_TXE                      SPI_CR2_TXEIE
#define I2S_IT_RXNE                     SPI_CR2_RXNEIE
#define I2S_IT_ERR                      SPI_CR2_ERRIE
/**
  * @}
  */

/** @defgroup I2S_Flags_Definition I2S Flags Definition
  * @{
  */
#define I2S_FLAG_TXE                    SPI_SR_TXE
#define I2S_FLAG_RXNE                   SPI_SR_RXNE

#define I2S_FLAG_UDR                    SPI_SR_UDR
#define I2S_FLAG_OVR                    SPI_SR_OVR
#define I2S_FLAG_FRE                    SPI_SR_FRE

#define I2S_FLAG_CHSIDE                 SPI_SR_CHSIDE
#define I2S_FLAG_BSY                    SPI_SR_BSY
/**
  * @}
  */
/** @defgroup I2S_Clock_Source I2S Clock Source Definition
  * @{
  */
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
    defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F469xx) || \
    defined(STM32F479xx)
#define I2S_CLOCK_PLL                     (0x00000000U)
#define I2S_CLOCK_EXTERNAL                (0x00000001U)
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
          STM32F401xC || STM32F401xE || STM32F411xE || STM32F469xx || STM32F479xx */

#if defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\
    defined(STM32F413xx) || defined(STM32F423xx)
#define I2S_CLOCK_PLL                     (0x00000000U)
#define I2S_CLOCK_EXTERNAL                (0x00000001U)
#define I2S_CLOCK_PLLR                    (0x00000002U)
#define I2S_CLOCK_PLLSRC                  (0x00000003U)
#endif /* STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */

#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
#define I2S_CLOCK_PLLSRC                  (0x00000000U)
#define I2S_CLOCK_EXTERNAL                (0x00000001U)
#define I2S_CLOCK_PLLR                    (0x00000002U)
#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
/**
  * @}
  */

/**
  * @}
  */

/* Exported macro ------------------------------------------------------------*/
/** @defgroup I2S_Exported_Macros I2S Exported Macros
  * @{
  */

/** @brief Reset I2S handle state
  * @param  __HANDLE__ specifies the I2S Handle.
  * @retval None
  */
#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET)

/** @brief  Enable or disable the specified SPI peripheral (in I2S mode).
  * @param  __HANDLE__ specifies the I2S Handle.
  * @retval None
  */
#define __HAL_I2S_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR |= SPI_I2SCFGR_I2SE)
#define __HAL_I2S_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR &=(uint16_t)(~SPI_I2SCFGR_I2SE))

/** @brief  Enable or disable the specified I2S interrupts.
  * @param  __HANDLE__ specifies the I2S Handle.
  * @param  __INTERRUPT__ specifies the interrupt source to enable or disable.
  *         This parameter can be one of the following values:
  *            @arg I2S_IT_TXE: Tx buffer empty interrupt enable
  *            @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
  *            @arg I2S_IT_ERR: Error interrupt enable
  * @retval None
  */
#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &=(uint16_t)(~(__INTERRUPT__)))

/** @brief  Checks if the specified I2S interrupt source is enabled or disabled.
  * @param  __HANDLE__ specifies the I2S Handle.
  *         This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral.
  * @param  __INTERRUPT__ specifies the I2S interrupt source to check.
  *          This parameter can be one of the following values:
  *            @arg I2S_IT_TXE: Tx buffer empty interrupt enable
  *            @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
  *            @arg I2S_IT_ERR: Error interrupt enable
  * @retval The new state of __IT__ (TRUE or FALSE).
  */
#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)

/** @brief  Checks whether the specified I2S flag is set or not.
  * @param  __HANDLE__ specifies the I2S Handle.
  * @param  __FLAG__ specifies the flag to check.
  *         This parameter can be one of the following values:
  *            @arg I2S_FLAG_RXNE: Receive buffer not empty flag
  *            @arg I2S_FLAG_TXE: Transmit buffer empty flag
  *            @arg I2S_FLAG_UDR: Underrun flag
  *            @arg I2S_FLAG_OVR: Overrun flag
  *            @arg I2S_FLAG_FRE: Frame error flag
  *            @arg I2S_FLAG_CHSIDE: Channel Side flag
  *            @arg I2S_FLAG_BSY: Busy flag
  * @retval The new state of __FLAG__ (TRUE or FALSE).
  */
#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))

/** @brief Clears the I2S OVR pending flag.
  * @param  __HANDLE__ specifies the I2S Handle.
  * @retval None
  */
#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__)     \
  do{                                           \
    __IO uint32_t tmpreg = 0x00U;               \
    tmpreg = (__HANDLE__)->Instance->DR;        \
    tmpreg = (__HANDLE__)->Instance->SR;        \
    UNUSED(tmpreg);                             \
  } while(0)

/** @brief Clears the I2S UDR pending flag.
  * @param  __HANDLE__ specifies the I2S Handle.
  * @retval None
  */
#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__)     \
  do{                                           \
  __IO uint32_t tmpreg = 0x00U;                 \
  tmpreg = (__HANDLE__)->Instance->SR;          \
  UNUSED(tmpreg);                               \
  } while(0)
/**
  * @}
  */

/* Include I2S Extension module */
#include "stm32f4xx_hal_i2s_ex.h"

/* Exported functions --------------------------------------------------------*/
/** @defgroup I2S_Exported_Functions I2S Exported Functions
  * @{
  */

/** @defgroup I2S_Exported_Functions_Group1 I2S Initialization and de-initialization functions
  * @{
  */
/* Initialization/de-initialization functions  **********************************/
HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s);
HAL_StatusTypeDef HAL_I2S_DeInit (I2S_HandleTypeDef *hi2s);
void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s);
void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s);
/**
  * @}
  */

/** @defgroup I2S_Exported_Functions_Group2 I2S IO operation functions
  * @{
  */
/* I/O operation functions  *****************************************************/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);

 /* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s);

/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);

HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s);
HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s);
HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s);

/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/
void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s);
void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s);
void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s);
/**
  * @}
  */

/** @defgroup I2S_Exported_Functions_Group3 I2S Peripheral Control and State functions
  * @{
  */
/* Peripheral Control and State functions  ************************************/
HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s);
uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s);
/**
  * @}
  */

/**
  * @}
  */

/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup I2S_Private_Constants I2S Private Constants
  * @{
  */

/**
  * @}
  */

/* Private macros ------------------------------------------------------------*/
/** @defgroup I2S_Private_Macros I2S Private Macros
  * @{
  */
#define IS_I2S_MODE(MODE) (((MODE) == I2S_MODE_SLAVE_TX)  || \
                           ((MODE) == I2S_MODE_SLAVE_RX)  || \
                           ((MODE) == I2S_MODE_MASTER_TX) || \
                           ((MODE) == I2S_MODE_MASTER_RX))

#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_STANDARD_PHILIPS)   || \
                                   ((STANDARD) == I2S_STANDARD_MSB)       || \
                                   ((STANDARD) == I2S_STANDARD_LSB)       || \
                                   ((STANDARD) == I2S_STANDARD_PCM_SHORT) || \
                                   ((STANDARD) == I2S_STANDARD_PCM_LONG))

#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DATAFORMAT_16B)          || \
                                    ((FORMAT) == I2S_DATAFORMAT_16B_EXTENDED) || \
                                    ((FORMAT) == I2S_DATAFORMAT_24B)          || \
                                    ((FORMAT) == I2S_DATAFORMAT_32B))

#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOUTPUT_ENABLE) || \
                                    ((OUTPUT) == I2S_MCLKOUTPUT_DISABLE))

#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AUDIOFREQ_8K) && \
                                  ((FREQ) <= I2S_AUDIOFREQ_192K)) || \
                                  ((FREQ) == I2S_AUDIOFREQ_DEFAULT))

#define IS_I2S_FULLDUPLEX_MODE(MODE) (((MODE) == I2S_FULLDUPLEXMODE_DISABLE) || \
                                      ((MODE) == I2S_FULLDUPLEXMODE_ENABLE))

#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_LOW) || \
                           ((CPOL) == I2S_CPOL_HIGH))

#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
    defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F469xx) || \
    defined(STM32F479xx)
#define IS_I2S_CLOCKSOURCE(CLOCK) (((CLOCK) == I2S_CLOCK_EXTERNAL) ||\
                                   ((CLOCK) == I2S_CLOCK_PLL))
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
          STM32F401xC || STM32F401xE || STM32F411xE || STM32F469xx || STM32F479xx */

#if defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx)  ||\
    defined(STM32F412Rx) || defined(STM32F412Cx) || defined (STM32F413xx) ||\
    defined(STM32F423xx)
#define IS_I2S_CLOCKSOURCE(CLOCK) (((CLOCK) == I2S_CLOCK_EXTERNAL) ||\
                                   ((CLOCK) == I2S_CLOCK_PLL)      ||\
                                   ((CLOCK) == I2S_CLOCK_PLLSRC)   ||\
                                   ((CLOCK) == I2S_CLOCK_PLLR))
#endif /* STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */

#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
#define IS_I2S_CLOCKSOURCE(CLOCK) (((CLOCK) == I2S_CLOCK_EXTERNAL) ||\
                                   ((CLOCK) == I2S_CLOCK_PLLSRC)     ||\
                                   ((CLOCK) == I2S_CLOCK_PLLR))
#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */

/**
  * @}
  */

/* Private functions ---------------------------------------------------------*/
/**
  * @}
  */

/**
  * @}
  */

#ifdef __cplusplus
}
#endif


#endif /* __STM32F4xx_HAL_I2S_H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/