Improve compass calibration dialog: The previous calibration dialog showed some "magic" numbers and a 60 second count down. The new version is trying to guide the user through the calibration process: first rotate pitch, then roll and at last yaw angle. A step to the next angle is taken when enough data per angle is collected (change from red to green). To enable the yaw visualization a simple calibration is done while rotating the axis. The function behind the calibration was not modified => the suggested process can be ignored and the same handling as the with old dialog may be applied. With the new process the dialog may be left early. Anyhow it will still be left after 60 seconds and the fine calibration is performed in the same way as before.

# How to Create From Scratch a Project for _CPU1-Upper_ Code #

The main CPU (aka. _CPU1 Discovery_) firmware is splitted in two parts:
- The proper _CPU1 Discovery_ firmware, with the main code.
- The _protected upper memory_ firmware, which is programmed during _OSTC4_ production, and contains (amongst other things) code used to upload and install firmware upgrades.

## Make a specific project ##

Follow the same procedure than for [CPU1-Discovery](Detailed CPU1-Discovery Project.md), (same processor, same includes) but include the `CPU1-Upper` source directory.

**
NOT FINISHED YET... BE PATIENT
**