Mercurial > public > ostc4
view Discovery/Src/externCPU2bootloader.c @ 1007:65d35e66efb9 GasConsumption
Improve compass calibration dialog:
The previous calibration dialog showed some "magic" numbers and a 60 second count down. The new version is trying to guide the user through the calibration process: first rotate pitch, then roll and at last yaw angle. A step to the next angle is taken when enough data per angle is collected (change from red to green). To enable the yaw visualization a simple calibration is done while rotating the axis.
The function behind the calibration was not modified => the suggested process can be ignored and the same handling as the with old dialog may be applied. With the new process the dialog may be left early. Anyhow it will still be left after 60 seconds and the fine calibration is performed in the same way as before.
| author | Ideenmodellierer |
|---|---|
| date | Mon, 05 May 2025 21:02:34 +0200 |
| parents | 01f40cb1057e |
| children |
line wrap: on
line source
/** ****************************************************************************** * @file externCPU2bootloader.c Template * @author heinrichs weikamp gmbh * @version V0.0.1 * @date 23-Oct-2014 * @version V0.0.1 * @since 23-Oct-2014 * @brief Main Template to communicate with the second CPU in bootloader mode * bootloader ROM build by ST and defined in AN4286 * @verbatim ============================================================================== ##### How to use ##### ============================================================================== @endverbatim ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2016 heinrichs weikamp</center></h2> * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal.h" #include "stdio.h" #include "ostc.h" #include "settings.h" #include "externCPU2bootloader.h" #include "externLogbookFlash.h" #include "tComm.h" /* Exported variables --------------------------------------------------------*/ /* Private types -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private function prototypes -----------------------------------------------*/ static uint8_t boot_sync_frame(void); static uint8_t boot_ack(void); static uint8_t boot_get_id(uint8_t *RxBuffer); static uint8_t boot_get_version(uint8_t *RxBuffer); static uint8_t boot_write_memory(uint32_t address, uint8_t length_minus_1, uint8_t *data); static uint8_t boot_erase_memory(void); static void Bootloader_send_command(uint8_t command); static void Bootloader_spi_single(uint8_t TxByte); static void Bootloader_spi(uint16_t lengthData, uint8_t *aTxBuffer, uint8_t *aRxBuffer); //static void Bootloader_Error_Handler(void); /* Exported functions --------------------------------------------------------*/ uint8_t extCPU2bootloader_start(uint8_t *version, uint16_t *chipID) { uint8_t aRxBuffer[256] = { 0 }; HAL_GPIO_WritePin(SMALLCPU_CSB_GPIO_PORT,SMALLCPU_CSB_PIN,GPIO_PIN_RESET); boot_sync_frame(); boot_get_version(aRxBuffer); *version = aRxBuffer[1]; HAL_Delay(10); boot_get_id(aRxBuffer); *chipID = ((uint16_t)aRxBuffer[2]) << 8; *chipID += (uint16_t)aRxBuffer[3]; HAL_Delay(10); if((*chipID == 0x431) && (*version > 10) && (*version < 32)) return 1; else return 0; } uint8_t extCPU2bootloader_internal(uint8_t* buffer, uint32_t length, char* display_text) { uint8_t version = 0; uint16_t chipID = 0; if(!extCPU2bootloader_start(&version,&chipID)) return 0; if(!boot_erase_memory()) return 0; HAL_Delay(100); uint16_t i=0; uint32_t lengthsave = length; uint8_t percent = 0; while(length) { percent = (100 * (i * 256)) /lengthsave; tComm_verlauf(percent); if(length > 256) { if( !boot_write_memory(0x08000000 + (i * 256), 255, &buffer[i * 256]) ) return 0;; length -= 256; } else { if(!boot_write_memory(0x08000000 + (i * 256), length - 1, &buffer[i * 256])) return 0; length = 0; } i++; } return 2; } uint8_t extCPU2bootloader(uint8_t* buffer, uint32_t length, char* display_text) { uint8_t result = 0; MX_SmallCPU_Reset_To_Boot(); result = extCPU2bootloader_internal(buffer,length,display_text); MX_SmallCPU_Reset_To_Standard(); return result; } /* Private functions --------------------------------------------------------*/ static uint8_t boot_sync_frame(void) { Bootloader_spi_single(0x5a); return boot_ack(); } static uint8_t boot_get_version(uint8_t *RxBuffer) { Bootloader_spi_single(0x5a); Bootloader_send_command(0x01); if(!boot_ack()) return 0; Bootloader_spi(3, NULL, RxBuffer); return boot_ack(); } static uint8_t boot_get_id(uint8_t *RxBuffer) { Bootloader_spi_single(0x5a); Bootloader_send_command(0x02); if(!boot_ack()) return 0; Bootloader_spi(5, NULL, RxBuffer); return boot_ack(); } uint8_t boot_write_memory(uint32_t address, uint8_t length_minus_1, uint8_t *data) { uint8_t addressNew[4]; uint8_t checksum = 0; uint16_t length; Bootloader_spi_single(0x5a); Bootloader_send_command(0x31); if(!boot_ack()) return 1; HAL_Delay(5); addressNew[0] = (uint8_t)((address >> 24) & 0xFF); addressNew[1] = (uint8_t)((address >> 16) & 0xFF); addressNew[2] = (uint8_t)((address >> 8) & 0xFF); addressNew[3] = (uint8_t)((address >> 0) & 0xFF); Bootloader_spi(4, addressNew, NULL); checksum = 0; checksum ^= addressNew[0]; checksum ^= addressNew[1]; checksum ^= addressNew[2]; checksum ^= addressNew[3]; Bootloader_spi_single(checksum); if(!boot_ack()) return 0; HAL_Delay(1); Bootloader_spi_single(length_minus_1); length = ((uint16_t)length_minus_1) + 1; Bootloader_spi(length, data, NULL); HAL_Delay(26); checksum = 0; checksum ^= length_minus_1; for(int i=0;i<length;i++) checksum ^= data[i]; Bootloader_spi_single(checksum); if(!boot_ack()) return 0; HAL_Delay(1); return 1; } static uint8_t boot_erase_memory(void) { uint8_t special_erase_with_checksum[3] = {0xFF, 0xFF, 0x00}; Bootloader_spi_single(0x5a); Bootloader_send_command(0x44); if(!boot_ack()) return 0; Bootloader_spi(3, special_erase_with_checksum, NULL); HAL_Delay(11000); /* 5.5 to 11 seconds */ if(!boot_ack()) return 0; return 1; } /* write unprotect does reset the system !! */ uint8_t boot_write_unprotect(void) { Bootloader_spi_single(0x5a); Bootloader_send_command(0x73); if(!boot_ack()) return 0; return boot_ack(); } static uint8_t boot_ack(void) { uint8_t answer = 0; Bootloader_spi_single(0x00); for(int i=0; i< 1000; i++) { Bootloader_spi(1, NULL, &answer); if((answer == 0x79) || (answer == 0x1F)) { Bootloader_spi_single(0x79); break; } HAL_Delay(10); } if(answer == 0x79) return 1; else return 0; } static void Bootloader_send_command(uint8_t command) { uint8_t send[2]; uint8_t receive[2]; send[0] = command; send[1] = 0xFF ^ command; Bootloader_spi(2, send, receive); } static void Bootloader_spi_single(uint8_t TxByte) { Bootloader_spi(1,&TxByte, 0); } static void Bootloader_spi(uint16_t lengthData, uint8_t *aTxBuffer, uint8_t *aRxBuffer) { uint8_t dummy[256] = { 0 }; uint8_t *tx_data; uint8_t *rx_data; tx_data = aTxBuffer; rx_data = aRxBuffer; if(aTxBuffer == NULL) tx_data = dummy; if(aRxBuffer == NULL) rx_data = dummy; //HAL_GPIO_WritePin(OSCILLOSCOPE_GPIO_PORT,OSCILLOSCOPE_PIN,GPIO_PIN_RESET); // only for testing with Oscilloscope HAL_SPI_TransmitReceive(&cpu2DmaSpi, (uint8_t *)tx_data, (uint8_t *)rx_data, (uint16_t)lengthData,1000); /* if(HAL_SPI_TransmitReceive_DMA(&cpu2DmaSpi, (uint8_t *)tx_data, (uint8_t *)rx_data, (uint16_t)lengthData) != HAL_OK) if(HAL_SPI_TransmitReceive_DMA(&cpu2DmaSpi, (uint8_t *)tx_data, (uint8_t *)rx_data, (uint16_t)lengthData) != HAL_OK) Bootloader_Error_Handler(); while (HAL_SPI_GetState(&cpu2DmaSpi) != HAL_SPI_STATE_READY)// only for testing with Oscilloscope { } HAL_GPIO_WritePin(OSCILLOSCOPE_GPIO_PORT,OSCILLOSCOPE_PIN,GPIO_PIN_SET); // only for testing with Oscilloscope */ } /* static void Bootloader_Error_Handler(void) { while(1); } */
