Mercurial > public > ostc4

view Discovery/Src/demo.c @ 1007:65d35e66efb9 GasConsumption

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Improve compass calibration dialog: The previous calibration dialog showed some "magic" numbers and a 60 second count down. The new version is trying to guide the user through the calibration process: first rotate pitch, then roll and at last yaw angle. A step to the next angle is taken when enough data per angle is collected (change from red to green). To enable the yaw visualization a simple calibration is done while rotating the axis. The function behind the calibration was not modified => the suggested process can be ignored and the same handling as the with old dialog may be applied. With the new process the dialog may be left early. Anyhow it will still be left after 60 seconds and the fine calibration is performed in the same way as before.
author Ideenmodellierer
date Mon, 05 May 2025 21:02:34 +0200
parents 5f11787b4f42
children 5865f0aeb438
line wrap: on
line source

/**
  ******************************************************************************
	* @copyright	heinrichs weikamp gmbh
  * @file    		demo.c
  * @author  		heinrichs weikamp gmbh
	* @date    		26-Nov-2015
  * @version 		0.1
  * @since	 		26-Nov-2015
  * @brief   		f�r die Messe und die Vitrine
	* @bug
	* @warning
  @verbatim
  ==============================================================================
	

	==============================================================================
  @endverbatim
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2015 heinrichs weikamp</center></h2>
  *
  ******************************************************************************
  */

#include "demo.h"
#include "base.h" // for BUTTON_BACK, ...
#include "data_exchange_main.h" // for time_elapsed_ms()
#include "settings.h"
#include "ostc.h"

#ifndef DEMOMODE

/* Exported functions --------------------------------------------------------*/

uint8_t demoGetCommand(void) { return 0; }
uint8_t demoModeActive(void) { return 0; }
void demoSendCommand(uint8_t action) { return; }


#else

/* Private variables with external access ------------------------------------*/

uint8_t demoModeActiveStatus = 1;
uint32_t systickDemoMode;

uint16_t demoModeActual = 0;

#define BUTTON_BACK (BUTTON_BACK_PIN | 0x80)
#define BUTTON_NEXT (BUTTON_NEXT_PIN | 0x80)
#define BUTTON_ENTER (BUTTON_ENTER_PIN | 0x80)

/* Private typedef -----------------------------------------------------------*/

#define MAXCOMMANDS 200

#ifdef SHOWCCRMODE
const uint8_t commandlist[MAXCOMMANDS][3] = 
{
/* Button, deci-seconds to wait */

	// start for both
	{0, 40},
	// start OC, activate CC
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_ENTER, 0},
	{BUTTON_ENTER, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_ENTER, 0}, // Change to CC
	{BUTTON_ENTER, 0}, // Leave Edit
	{BUTTON_BACK, 0}, 	// Cursor
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_BACK, 0},
	{0, 0},
	{0, 0},
	{0, 0},
	{0, 0},
	{0, 0},
	{0, 0},
	// start CC @ 20, set cursor to Sim  Menu
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_BACK, 50},
	{0, 0},
	// re-loop @ 30
	{0, 3},
	// Logbook
	{BUTTON_BACK, 	0},
	{BUTTON_ENTER, 20},
	{BUTTON_NEXT, 	20},
	{BUTTON_BACK, 	0},
	{BUTTON_BACK, 	0},
	{BUTTON_BACK, 	0},
	// surface screen
	{0, 2},
	// menu
	{BUTTON_NEXT, 	0},
	{BUTTON_NEXT, 	0},
	{BUTTON_NEXT, 	0},
	{BUTTON_NEXT, 	0},
	{BUTTON_NEXT, 	0},
	{BUTTON_NEXT, 	0},
	{BUTTON_NEXT, 	0},
	{BUTTON_NEXT, 	0},
	{BUTTON_NEXT, 	0},
	{BUTTON_ENTER, 30},
	{BUTTON_ENTER, 0},
	// simulator
	{0, 10},
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 10},
	
	{BUTTON_NEXT, 	0},
	{BUTTON_NEXT, 	0},
	{BUTTON_ENTER, 0},
	{BUTTON_ENTER, 0},
	// the end, repeat from start
	{255, 0}
};
#else // OC Mode Demo
const uint8_t commandlist[MAXCOMMANDS][2] = 
{
/* Button, seconds to wait */

	// start for both
	{0, 50}, // wait IS IMPORTANT
	// start CC, activate OC
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_ENTER, 0},
	{BUTTON_ENTER, 0},
	{BUTTON_ENTER, 0},
	{BUTTON_ENTER, 0},
	{BUTTON_BACK, 0},	// Leave Cursor Mode
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0}, // OC
	{BUTTON_BACK, 0},
	{0, 0},
	{0, 0},
	{0, 0},
	{0, 0},
	// start OC @ line 20
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0}, // OC -> SIM
	{BUTTON_BACK, 0}, // Exit Menu
	{0, 0},
	{0, 0},
	{0, 0},
	// re-loop @ 30
	{0, 10},
	// Logbook
	{BUTTON_BACK, 	4},
	{BUTTON_NEXT, 	0},
	{BUTTON_NEXT, 	10},
	{BUTTON_ENTER, 20},
	{BUTTON_NEXT, 	20},
	{BUTTON_NEXT, 	20},
	{BUTTON_BACK, 	0},
	{BUTTON_BACK, 	5},
	{BUTTON_BACK, 	0}, // Exit Logbook Mode
	// surface screen
	{0, 10},
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 10},

	// menu
	// activate Configure Deco Gas
	{BUTTON_NEXT, 	0}, // Start Menu
	{BUTTON_NEXT, 	2}, // SIM -> OC
	{BUTTON_ENTER, 2},
	{BUTTON_NEXT, 	1},
	{BUTTON_ENTER, 0},
	{BUTTON_ENTER, 0},
	// Mix 30 -> 90
	{BUTTON_NEXT, 	0},
	{BUTTON_NEXT, 	0},
	{BUTTON_NEXT, 	0},
	{BUTTON_NEXT, 	0},
	{BUTTON_NEXT, 	0},
	{BUTTON_NEXT, 	0},
	{BUTTON_ENTER, 0},
	// Mix 90 -> 99
	{BUTTON_BACK, 	0},
	{BUTTON_ENTER, 0},
	{BUTTON_ENTER, 0},
	{BUTTON_ENTER, 5},
	// First -> Deco
	{BUTTON_NEXT, 	2},
	{BUTTON_ENTER, 2},
	{BUTTON_NEXT, 	2},
	{BUTTON_ENTER, 2},
	{BUTTON_ENTER, 10},
	{BUTTON_BACK, 	0},
	{BUTTON_BACK, 	30},
/*
	// OC -> SIM
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	1},
	{BUTTON_ENTER, 10},
*/
	// SYS2 Layout
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	2},
	{BUTTON_ENTER,  2},
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	2},
	{BUTTON_ENTER,  2},
	{BUTTON_NEXT, 	2},
	{BUTTON_ENTER,  2},
	{BUTTON_BACK, 	2},
	{BUTTON_BACK, 	10},
	// SYS2 -> SIM
	{BUTTON_NEXT, 	2},
	{BUTTON_ENTER, 10},
	// simulator
	{BUTTON_ENTER, 40}, // Start Simulator
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 90},
	
	{BUTTON_NEXT, 	5}, // Quit
	{BUTTON_NEXT, 	5},
	{BUTTON_ENTER,  5},
	{BUTTON_ENTER, 50},
	// surface screen
	{0, 10},
	// Logbook
	{BUTTON_BACK, 20},
	{BUTTON_ENTER, 20},
	{BUTTON_NEXT, 	20},
	{BUTTON_NEXT, 	20},
	{BUTTON_BACK, 	0},
	{BUTTON_BACK, 	5},
	{BUTTON_BACK, 	0}, // Exit Logbook Mode
	// surface screen
	{0, 10},
	// activate Configure Deco Gas, go to Gas 2
	{BUTTON_NEXT, 	0}, // Start Menu
	{BUTTON_NEXT, 	2}, // SIM -> OC
	{BUTTON_ENTER, 2},
	{BUTTON_NEXT, 	1},
	{BUTTON_ENTER, 0},
	{BUTTON_ENTER, 0},
	// Mix Decogas 99 -> EAN30 First
	{BUTTON_BACK, 	0},
	{BUTTON_BACK, 	0},
	{BUTTON_BACK, 	0},
	{BUTTON_BACK, 	0},
	{BUTTON_BACK, 	0},
	{BUTTON_BACK, 	0},
	{BUTTON_ENTER, 0},
	{BUTTON_NEXT, 	0},
	{BUTTON_ENTER, 0},
	{BUTTON_ENTER, 0},
	{BUTTON_ENTER, 2},
	{BUTTON_NEXT, 	2},
	{BUTTON_ENTER, 5},
	{BUTTON_ENTER, 5},
	{BUTTON_ENTER, 10}, // Now EAN 30 First
	{BUTTON_BACK, 	0}, // Exit Edit Mode
	{BUTTON_BACK, 	30}, // Exit Cursor Mode
/*
	// OC -> SIM
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	1},
	{BUTTON_ENTER, 10},
*/	
	// SYS2 Layout
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	2},
	{BUTTON_ENTER,  2},
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	2},
	{BUTTON_ENTER,  2},
	{BUTTON_NEXT, 	2},
	{BUTTON_ENTER,  2},
	{BUTTON_BACK, 	2},
	{BUTTON_BACK, 	10},
	// SYS -> SIM
	{BUTTON_NEXT, 	2},
	{BUTTON_ENTER, 10},
	// simulator
	{BUTTON_ENTER, 40}, // Start Simulator
	{BUTTON_ENTER, 5},
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 90},
	{BUTTON_NEXT, 	5}, // Menu?
	{BUTTON_NEXT, 	5}, // Quit?
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 50},
	// the end, repeat from start
	{255, 0}
};
#endif


/* Exported functions --------------------------------------------------------*/

uint8_t demoModeActive(void)
{
	return demoModeActiveStatus;
}

uint8_t demoGetCommand(void)
{
	if(!demoModeActiveStatus)
		return 0;
	
	uint32_t milliSecondsSinceLast;
	uint32_t systick_now;


	systick_now = HAL_GetTick();
	milliSecondsSinceLast = time_elapsed_ms(systickDemoMode, systick_now);

	#ifdef SHOWCCRMODE
	if((demoModeActual == 1) && (settingsGetPointer()->dive_mode == DIVEMODE_CCR))
		demoModeActual = 20;
	#else
	if((demoModeActual == 1) && (settingsGetPointer()->dive_mode == DIVEMODE_OC))
		demoModeActual = 20;
	#endif
	
	if(demoModeActual > MAXCOMMANDS - 2)
		demoModeActual = 30;
	

	uint32_t actualDelay = ((commandlist[demoModeActual][1]) * 100) + 15;
	
	if(milliSecondsSinceLast < actualDelay)
		return 0;
	
	systickDemoMode = systick_now;
	
	if(commandlist[demoModeActual][0] == 255)
		demoModeActual = 30;
	else
		demoModeActual++;
	
	return commandlist[demoModeActual][0];
}


void demoSendCommand(uint8_t action)
{
	demoModeActiveStatus = 0;
	
}

void demoConfigureSettings(void)
{
	settingsGetPointer()->gas[1].oxygen_percentage = 21;
	settingsGetPointer()->gas[1].helium_percentage = 0;
	settingsGetPointer()->gas[1].depth_meter = 0;
	settingsGetPointer()->gas[1].note.ub.first = 0;
	settingsGetPointer()->gas[1].note.ub.active = 0;
	settingsGetPointer()->gas[1].note.ub.deco = 0;
	settingsGetPointer()->gas[1].note.ub.travel = 0;

	settingsGetPointer()->gas[2].oxygen_percentage = 30;
	settingsGetPointer()->gas[2].helium_percentage = 0;
	settingsGetPointer()->gas[2].depth_meter = 0;
	settingsGetPointer()->gas[2].note.ub.first = 1;
	settingsGetPointer()->gas[2].note.ub.active = 1;
	settingsGetPointer()->gas[2].note.ub.deco = 0;
	settingsGetPointer()->gas[2].note.ub.travel = 0;
	
	settingsGetPointer()->ButtonResponsiveness[0] = 90;
	settingsGetPointer()->ButtonResponsiveness[1] = 90;
	settingsGetPointer()->ButtonResponsiveness[2] = 90;
	settingsGetPointer()->ButtonResponsiveness[3] = 90;
}

/* Includes ------------------------------------------------------------------*/

/* Private function prototypes -----------------------------------------------*/

/* Private variables with external access ------------------------------------*/

/* Exported functions --------------------------------------------------------*/

/* Private functions ---------------------------------------------------------*/


#endif // DEMO


/************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/