Mercurial > public > ostc4
view Common/Drivers/STM32F4xx_HAL_DRIVER_v120/Inc/stm32f4xx_hal_dcmi.h @ 109:65a6e352ce08 FlipDisplay
Consider computer heading in case of a flipped display
author | Ideenmodellierer |
---|---|
date | Tue, 01 Jan 2019 21:00:55 +0100 |
parents | 5f11787b4f42 |
children |
line wrap: on
line source
/** ****************************************************************************** * @file stm32f4xx_hal_dcmi.h * @author MCD Application Team * @version V1.2.0 * @date 26-December-2014 * @brief Header file of DCMI HAL module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_DCMI_H #define __STM32F4xx_HAL_DCMI_H #ifdef __cplusplus extern "C" { #endif #if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal_def.h" /** @addtogroup STM32F4xx_HAL_Driver * @{ */ /** @addtogroup DCMI DCMI * @brief DCMI HAL module driver * @{ */ /* Exported types ------------------------------------------------------------*/ /** @defgroup DCMI_Exported_Types DCMI Exported Types * @{ */ /** * @brief DCMI Error source */ typedef enum { DCMI_ERROR_SYNC = 1, /*!< Synchronisation error */ DCMI_OVERRUN = 2, /*!< DCMI Overrun */ }DCMI_ErrorTypeDef; /** * @brief DCMI Embedded Synchronisation CODE Init structure definition */ typedef struct { uint8_t FrameStartCode; /*!< Specifies the code of the frame start delimiter. */ uint8_t LineStartCode; /*!< Specifies the code of the line start delimiter. */ uint8_t LineEndCode; /*!< Specifies the code of the line end delimiter. */ uint8_t FrameEndCode; /*!< Specifies the code of the frame end delimiter. */ }DCMI_CodesInitTypeDef; /** * @brief DCMI Init structure definition */ typedef struct { uint32_t SynchroMode; /*!< Specifies the Synchronization Mode: Hardware or Embedded. This parameter can be a value of @ref DCMI_Synchronization_Mode */ uint32_t PCKPolarity; /*!< Specifies the Pixel clock polarity: Falling or Rising. This parameter can be a value of @ref DCMI_PIXCK_Polarity */ uint32_t VSPolarity; /*!< Specifies the Vertical synchronization polarity: High or Low. This parameter can be a value of @ref DCMI_VSYNC_Polarity */ uint32_t HSPolarity; /*!< Specifies the Horizontal synchronization polarity: High or Low. This parameter can be a value of @ref DCMI_HSYNC_Polarity */ uint32_t CaptureRate; /*!< Specifies the frequency of frame capture: All, 1/2 or 1/4. This parameter can be a value of @ref DCMI_Capture_Rate */ uint32_t ExtendedDataMode; /*!< Specifies the data width: 8-bit, 10-bit, 12-bit or 14-bit. This parameter can be a value of @ref DCMI_Extended_Data_Mode */ DCMI_CodesInitTypeDef SyncroCode; /*!< Specifies the code of the frame start delimiter. */ uint32_t JPEGMode; /*!< Enable or Disable the JPEG mode. This parameter can be a value of @ref DCMI_MODE_JPEG */ }DCMI_InitTypeDef; /** * @brief HAL DCMI State structures definition */ typedef enum { HAL_DCMI_STATE_RESET = 0x00, /*!< DCMI not yet initialized or disabled */ HAL_DCMI_STATE_READY = 0x01, /*!< DCMI initialized and ready for use */ HAL_DCMI_STATE_BUSY = 0x02, /*!< DCMI internal processing is ongoing */ HAL_DCMI_STATE_TIMEOUT = 0x03, /*!< DCMI timeout state */ HAL_DCMI_STATE_ERROR = 0x04 /*!< DCMI error state */ }HAL_DCMI_StateTypeDef; /** * @brief DCMI handle Structure definition */ typedef struct { DCMI_TypeDef *Instance; /*!< DCMI Register base address */ DCMI_InitTypeDef Init; /*!< DCMI parameters */ HAL_LockTypeDef Lock; /*!< DCMI locking object */ __IO HAL_DCMI_StateTypeDef State; /*!< DCMI state */ __IO uint32_t XferCount; /*!< DMA transfer counter */ __IO uint32_t XferSize; /*!< DMA transfer size */ uint32_t XferTransferNumber; /*!< DMA transfer number */ uint32_t pBuffPtr; /*!< Pointer to DMA output buffer */ DMA_HandleTypeDef *DMA_Handle; /*!< Pointer to the DMA handler */ __IO uint32_t ErrorCode; /*!< DCMI Error code */ }DCMI_HandleTypeDef; /** * @} */ /* Exported constants --------------------------------------------------------*/ /** @defgroup DCMI_Exported_Constants DCMI Exported Constants * @{ */ /** @defgroup DCMI_Error_Code DCMI Error Code * @{ */ #define HAL_DCMI_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ #define HAL_DCMI_ERROR_OVF ((uint32_t)0x00000001) /*!< Overflow error */ #define HAL_DCMI_ERROR_SYNC ((uint32_t)0x00000002) /*!< Synchronization error */ #define HAL_DCMI_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */ /** * @} */ /** @defgroup DCMI_Capture_Mode DCMI Capture Mode * @{ */ #define DCMI_MODE_CONTINUOUS ((uint32_t)0x00000000) /*!< The received data are transferred continuously into the destination memory through the DMA */ #define DCMI_MODE_SNAPSHOT ((uint32_t)DCMI_CR_CM) /*!< Once activated, the interface waits for the start of frame and then transfers a single frame through the DMA */ /** * @} */ /** @defgroup DCMI_Synchronization_Mode DCMI Synchronization Mode * @{ */ #define DCMI_SYNCHRO_HARDWARE ((uint32_t)0x00000000) /*!< Hardware synchronization data capture (frame/line start/stop) is synchronized with the HSYNC/VSYNC signals */ #define DCMI_SYNCHRO_EMBEDDED ((uint32_t)DCMI_CR_ESS) /*!< Embedded synchronization data capture is synchronized with synchronization codes embedded in the data flow */ /** * @} */ /** @defgroup DCMI_PIXCK_Polarity DCMI PIXCK Polarity * @{ */ #define DCMI_PCKPOLARITY_FALLING ((uint32_t)0x00000000) /*!< Pixel clock active on Falling edge */ #define DCMI_PCKPOLARITY_RISING ((uint32_t)DCMI_CR_PCKPOL) /*!< Pixel clock active on Rising edge */ /** * @} */ /** @defgroup DCMI_VSYNC_Polarity DCMI VSYNC Polarity * @{ */ #define DCMI_VSPOLARITY_LOW ((uint32_t)0x00000000) /*!< Vertical synchronization active Low */ #define DCMI_VSPOLARITY_HIGH ((uint32_t)DCMI_CR_VSPOL) /*!< Vertical synchronization active High */ /** * @} */ /** @defgroup DCMI_HSYNC_Polarity DCMI HSYNC Polarity * @{ */ #define DCMI_HSPOLARITY_LOW ((uint32_t)0x00000000) /*!< Horizontal synchronization active Low */ #define DCMI_HSPOLARITY_HIGH ((uint32_t)DCMI_CR_HSPOL) /*!< Horizontal synchronization active High */ /** * @} */ /** @defgroup DCMI_MODE_JPEG DCMI MODE JPEG * @{ */ #define DCMI_JPEG_DISABLE ((uint32_t)0x00000000) /*!< Mode JPEG Disabled */ #define DCMI_JPEG_ENABLE ((uint32_t)DCMI_CR_JPEG) /*!< Mode JPEG Enabled */ /** * @} */ /** @defgroup DCMI_Capture_Rate DCMI Capture Rate * @{ */ #define DCMI_CR_ALL_FRAME ((uint32_t)0x00000000) /*!< All frames are captured */ #define DCMI_CR_ALTERNATE_2_FRAME ((uint32_t)DCMI_CR_FCRC_0) /*!< Every alternate frame captured */ #define DCMI_CR_ALTERNATE_4_FRAME ((uint32_t)DCMI_CR_FCRC_1) /*!< One frame in 4 frames captured */ /** * @} */ /** @defgroup DCMI_Extended_Data_Mode DCMI Extended Data Mode * @{ */ #define DCMI_EXTEND_DATA_8B ((uint32_t)0x00000000) /*!< Interface captures 8-bit data on every pixel clock */ #define DCMI_EXTEND_DATA_10B ((uint32_t)DCMI_CR_EDM_0) /*!< Interface captures 10-bit data on every pixel clock */ #define DCMI_EXTEND_DATA_12B ((uint32_t)DCMI_CR_EDM_1) /*!< Interface captures 12-bit data on every pixel clock */ #define DCMI_EXTEND_DATA_14B ((uint32_t)(DCMI_CR_EDM_0 | DCMI_CR_EDM_1)) /*!< Interface captures 14-bit data on every pixel clock */ /** * @} */ /** @defgroup DCMI_Window_Coordinate DCMI Window Coordinate * @{ */ #define DCMI_WINDOW_COORDINATE ((uint32_t)0x3FFF) /*!< Window coordinate */ /** * @} */ /** @defgroup DCMI_Window_Height DCMI Window Height * @{ */ #define DCMI_WINDOW_HEIGHT ((uint32_t)0x1FFF) /*!< Window Height */ /** * @} */ /** @defgroup DCMI_interrupt_sources DCMI interrupt sources * @{ */ #define DCMI_IT_FRAME ((uint32_t)DCMI_IER_FRAME_IE) #define DCMI_IT_OVF ((uint32_t)DCMI_IER_OVF_IE) #define DCMI_IT_ERR ((uint32_t)DCMI_IER_ERR_IE) #define DCMI_IT_VSYNC ((uint32_t)DCMI_IER_VSYNC_IE) #define DCMI_IT_LINE ((uint32_t)DCMI_IER_LINE_IE) /** * @} */ /** @defgroup DCMI_Flags DCMI Flags * @{ */ /** * @brief DCMI SR register */ #define DCMI_FLAG_HSYNC ((uint32_t)0x2001) #define DCMI_FLAG_VSYNC ((uint32_t)0x2002) #define DCMI_FLAG_FNE ((uint32_t)0x2004) /** * @brief DCMI RISR register */ #define DCMI_FLAG_FRAMERI ((uint32_t)DCMI_RISR_FRAME_RIS) #define DCMI_FLAG_OVFRI ((uint32_t)DCMI_RISR_OVF_RIS) #define DCMI_FLAG_ERRRI ((uint32_t)DCMI_RISR_ERR_RIS) #define DCMI_FLAG_VSYNCRI ((uint32_t)DCMI_RISR_VSYNC_RIS) #define DCMI_FLAG_LINERI ((uint32_t)DCMI_RISR_LINE_RIS) /** * @brief DCMI MISR register */ #define DCMI_FLAG_FRAMEMI ((uint32_t)0x1001) #define DCMI_FLAG_OVFMI ((uint32_t)0x1002) #define DCMI_FLAG_ERRMI ((uint32_t)0x1004) #define DCMI_FLAG_VSYNCMI ((uint32_t)0x1008) #define DCMI_FLAG_LINEMI ((uint32_t)0x1010) /** * @} */ /** * @} */ /* Exported macro ------------------------------------------------------------*/ /** @defgroup DCMI_Exported_Macros DCMI Exported Macros * @{ */ /** @brief Reset DCMI handle state * @param __HANDLE__: specifies the DCMI handle. * @retval None */ #define __HAL_DCMI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DCMI_STATE_RESET) /** * @brief Enable the DCMI. * @param __HANDLE__: DCMI handle * @retval None */ #define __HAL_DCMI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DCMI_CR_ENABLE) /** * @brief Disable the DCMI. * @param __HANDLE__: DCMI handle * @retval None */ #define __HAL_DCMI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(DCMI_CR_ENABLE)) /* Interrupt & Flag management */ /** * @brief Get the DCMI pending flags. * @param __HANDLE__: DCMI handle * @param __FLAG__: Get the specified flag. * This parameter can be any combination of the following values: * @arg DCMI_FLAG_FRAMERI: Frame capture complete flag mask * @arg DCMI_FLAG_OVFRI: Overflow flag mask * @arg DCMI_FLAG_ERRRI: Synchronization error flag mask * @arg DCMI_FLAG_VSYNCRI: VSYNC flag mask * @arg DCMI_FLAG_LINERI: Line flag mask * @retval The state of FLAG. */ #define __HAL_DCMI_GET_FLAG(__HANDLE__, __FLAG__)\ ((((__FLAG__) & 0x3000) == 0x0)? ((__HANDLE__)->Instance->RISR & (__FLAG__)) :\ (((__FLAG__) & 0x2000) == 0x0)? ((__HANDLE__)->Instance->MISR & (__FLAG__)) : ((__HANDLE__)->Instance->SR & (__FLAG__))) /** * @brief Clear the DCMI pending flags. * @param __HANDLE__: DCMI handle * @param __FLAG__: specifies the flag to clear. * This parameter can be any combination of the following values: * @arg DCMI_FLAG_FRAMERI: Frame capture complete flag mask * @arg DCMI_FLAG_OVFRI: Overflow flag mask * @arg DCMI_FLAG_ERRRI: Synchronization error flag mask * @arg DCMI_FLAG_VSYNCRI: VSYNC flag mask * @arg DCMI_FLAG_LINERI: Line flag mask * @retval None */ #define __HAL_DCMI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) /** * @brief Enable the specified DCMI interrupts. * @param __HANDLE__: DCMI handle * @param __INTERRUPT__: specifies the DCMI interrupt sources to be enabled. * This parameter can be any combination of the following values: * @arg DCMI_IT_FRAME: Frame capture complete interrupt mask * @arg DCMI_IT_OVF: Overflow interrupt mask * @arg DCMI_IT_ERR: Synchronization error interrupt mask * @arg DCMI_IT_VSYNC: VSYNC interrupt mask * @arg DCMI_IT_LINE: Line interrupt mask * @retval None */ #define __HAL_DCMI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__)) /** * @brief Disable the specified DCMI interrupts. * @param __HANDLE__: DCMI handle * @param __INTERRUPT__: specifies the DCMI interrupt sources to be enabled. * This parameter can be any combination of the following values: * @arg DCMI_IT_FRAME: Frame capture complete interrupt mask * @arg DCMI_IT_OVF: Overflow interrupt mask * @arg DCMI_IT_ERR: Synchronization error interrupt mask * @arg DCMI_IT_VSYNC: VSYNC interrupt mask * @arg DCMI_IT_LINE: Line interrupt mask * @retval None */ #define __HAL_DCMI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__)) /** * @brief Check whether the specified DCMI interrupt has occurred or not. * @param __HANDLE__: DCMI handle * @param __INTERRUPT__: specifies the DCMI interrupt source to check. * This parameter can be one of the following values: * @arg DCMI_IT_FRAME: Frame capture complete interrupt mask * @arg DCMI_IT_OVF: Overflow interrupt mask * @arg DCMI_IT_ERR: Synchronization error interrupt mask * @arg DCMI_IT_VSYNC: VSYNC interrupt mask * @arg DCMI_IT_LINE: Line interrupt mask * @retval The state of INTERRUPT. */ #define __HAL_DCMI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MISR & (__INTERRUPT__)) /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @addtogroup DCMI_Exported_Functions * @{ */ /** @addtogroup DCMI_Exported_Functions_Group1 * @{ */ /* Initialization and de-initialization functions *****************************/ HAL_StatusTypeDef HAL_DCMI_Init(DCMI_HandleTypeDef *hdcmi); HAL_StatusTypeDef HAL_DCMI_DeInit(DCMI_HandleTypeDef *hdcmi); void HAL_DCMI_MspInit(DCMI_HandleTypeDef* hdcmi); void HAL_DCMI_MspDeInit(DCMI_HandleTypeDef* hdcmi); /** * @} */ /** @addtogroup DCMI_Exported_Functions_Group2 * @{ */ /* IO operation functions *****************************************************/ HAL_StatusTypeDef HAL_DCMI_Start_DMA(DCMI_HandleTypeDef* hdcmi, uint32_t DCMI_Mode, uint32_t pData, uint32_t Length); HAL_StatusTypeDef HAL_DCMI_Stop(DCMI_HandleTypeDef* hdcmi); void HAL_DCMI_ErrorCallback(DCMI_HandleTypeDef *hdcmi); void HAL_DCMI_LineEventCallback(DCMI_HandleTypeDef *hdcmi); void HAL_DCMI_FrameEventCallback(DCMI_HandleTypeDef *hdcmi); void HAL_DCMI_VsyncEventCallback(DCMI_HandleTypeDef *hdcmi); void HAL_DCMI_IRQHandler(DCMI_HandleTypeDef *hdcmi); /** * @} */ /** @addtogroup DCMI_Exported_Functions_Group3 * @{ */ /* Peripheral Control functions ***********************************************/ HAL_StatusTypeDef HAL_DCMI_ConfigCROP(DCMI_HandleTypeDef *hdcmi, uint32_t X0, uint32_t Y0, uint32_t XSize, uint32_t YSize); HAL_StatusTypeDef HAL_DCMI_EnableCROP(DCMI_HandleTypeDef *hdcmi); HAL_StatusTypeDef HAL_DCMI_DisableCROP(DCMI_HandleTypeDef *hdcmi); /** * @} */ /** @addtogroup DCMI_Exported_Functions_Group4 * @{ */ /* Peripheral State functions *************************************************/ HAL_DCMI_StateTypeDef HAL_DCMI_GetState(DCMI_HandleTypeDef *hdcmi); uint32_t HAL_DCMI_GetError(DCMI_HandleTypeDef *hdcmi); /** * @} */ /** * @} */ /* Private types -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private constants ---------------------------------------------------------*/ /* Private macro -------------------------------------------------------------*/ /** @defgroup DCMI_Private_Macros DCMI Private Macros * @{ */ #define IS_DCMI_CAPTURE_MODE(MODE)(((MODE) == DCMI_MODE_CONTINUOUS) || \ ((MODE) == DCMI_MODE_SNAPSHOT)) #define IS_DCMI_SYNCHRO(MODE)(((MODE) == DCMI_SYNCHRO_HARDWARE) || \ ((MODE) == DCMI_SYNCHRO_EMBEDDED)) #define IS_DCMI_PCKPOLARITY(POLARITY)(((POLARITY) == DCMI_PCKPOLARITY_FALLING) || \ ((POLARITY) == DCMI_PCKPOLARITY_RISING)) #define IS_DCMI_VSPOLARITY(POLARITY)(((POLARITY) == DCMI_VSPOLARITY_LOW) || \ ((POLARITY) == DCMI_VSPOLARITY_HIGH)) #define IS_DCMI_HSPOLARITY(POLARITY)(((POLARITY) == DCMI_HSPOLARITY_LOW) || \ ((POLARITY) == DCMI_HSPOLARITY_HIGH)) #define IS_DCMI_MODE_JPEG(JPEG_MODE)(((JPEG_MODE) == DCMI_JPEG_DISABLE) || \ ((JPEG_MODE) == DCMI_JPEG_ENABLE)) #define IS_DCMI_CAPTURE_RATE(RATE) (((RATE) == DCMI_CR_ALL_FRAME) || \ ((RATE) == DCMI_CR_ALTERNATE_2_FRAME) || \ ((RATE) == DCMI_CR_ALTERNATE_4_FRAME)) #define IS_DCMI_EXTENDED_DATA(DATA)(((DATA) == DCMI_EXTEND_DATA_8B) || \ ((DATA) == DCMI_EXTEND_DATA_10B) || \ ((DATA) == DCMI_EXTEND_DATA_12B) || \ ((DATA) == DCMI_EXTEND_DATA_14B)) #define IS_DCMI_WINDOW_COORDINATE(COORDINATE) ((COORDINATE) <= DCMI_WINDOW_COORDINATE) #define IS_DCMI_WINDOW_HEIGHT(HEIGHT) ((HEIGHT) <= DCMI_WINDOW_HEIGHT) /** * @} */ /* Private functions ---------------------------------------------------------*/ /** @addtogroup DCMI_Private_Functions DCMI Private Functions * @{ */ /** * @} */ #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32F4xx_HAL_DCMI_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/