/**
  ******************************************************************************
  * @file    stm32f4xx_ll_usb.h
  * @author  MCD Application Team
  * @brief   Header file of USB Core HAL module.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */ 

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_LL_USB_H
#define __STM32F4xx_LL_USB_H

#ifdef __cplusplus
 extern "C" {
#endif
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
    defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
    defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
    defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"

/** @addtogroup STM32F4xx_HAL
  * @{
  */

/** @addtogroup USB_Core
  * @{
  */ 

/* Exported types ------------------------------------------------------------*/ 

/** 
  * @brief  USB Mode definition  
  */  
typedef enum 
{
   USB_OTG_DEVICE_MODE  = 0U,
   USB_OTG_HOST_MODE    = 1U,
   USB_OTG_DRD_MODE     = 2U
   
}USB_OTG_ModeTypeDef;

/** 
  * @brief  URB States definition  
  */ 
typedef enum {
  URB_IDLE = 0U,
  URB_DONE,
  URB_NOTREADY,
  URB_NYET,
  URB_ERROR,
  URB_STALL
    
}USB_OTG_URBStateTypeDef;

/** 
  * @brief  Host channel States  definition  
  */ 
typedef enum {
  HC_IDLE = 0U,
  HC_XFRC,
  HC_HALTED,
  HC_NAK,
  HC_NYET,
  HC_STALL,
  HC_XACTERR,  
  HC_BBLERR,   
  HC_DATATGLERR
    
}USB_OTG_HCStateTypeDef;

/** 
  * @brief  PCD Initialization Structure definition  
  */
typedef struct
{
  uint32_t dev_endpoints;        /*!< Device Endpoints number.
                                      This parameter depends on the used USB core.   
                                      This parameter must be a number between Min_Data = 1 and Max_Data = 15 */

  uint32_t Host_channels;        /*!< Host Channels number.
                                      This parameter Depends on the used USB core.   
                                      This parameter must be a number between Min_Data = 1 and Max_Data = 15 */

  uint32_t speed;                /*!< USB Core speed.
                                      This parameter can be any value of @ref USB_Core_Speed_                */

  uint32_t dma_enable;           /*!< Enable or disable of the USB embedded DMA.                             */

  uint32_t ep0_mps;              /*!< Set the Endpoint 0 Max Packet size. 
                                      This parameter can be any value of @ref USB_EP0_MPS_                   */

  uint32_t phy_itface;           /*!< Select the used PHY interface.
                                      This parameter can be any value of @ref USB_Core_PHY_                  */

  uint32_t Sof_enable;           /*!< Enable or disable the output of the SOF signal.                        */

  uint32_t low_power_enable;     /*!< Enable or disable the low power mode.                                  */

  uint32_t lpm_enable;           /*!< Enable or disable Link Power Management.                               */

  uint32_t battery_charging_enable; /*!< Enable or disable Battery charging.                                 */

  uint32_t vbus_sensing_enable;  /*!< Enable or disable the VBUS Sensing feature.                            */ 

  uint32_t use_dedicated_ep1;    /*!< Enable or disable the use of the dedicated EP1 interrupt.              */

  uint32_t use_external_vbus;    /*!< Enable or disable the use of the external VBUS.                        */

}USB_OTG_CfgTypeDef;

/** 
  * @brief  OTG End Point Initialization Structure definition 
  */
typedef struct
{
  uint8_t   num;            /*!< Endpoint number
                                This parameter must be a number between Min_Data = 1 and Max_Data = 15    */

  uint8_t   is_in;          /*!< Endpoint direction
                                This parameter must be a number between Min_Data = 0 and Max_Data = 1     */

  uint8_t   is_stall;       /*!< Endpoint stall condition
                                This parameter must be a number between Min_Data = 0 and Max_Data = 1     */

  uint8_t   type;           /*!< Endpoint type
                                 This parameter can be any value of @ref USB_EP_Type_                     */

  uint8_t   data_pid_start; /*!< Initial data PID
                                This parameter must be a number between Min_Data = 0 and Max_Data = 1     */

  uint8_t   even_odd_frame; /*!< IFrame parity
                                 This parameter must be a number between Min_Data = 0 and Max_Data = 1    */

  uint16_t  tx_fifo_num;    /*!< Transmission FIFO number
                                 This parameter must be a number between Min_Data = 1 and Max_Data = 15   */

  uint32_t  maxpacket;      /*!< Endpoint Max packet size
                                 This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */

  uint8_t   *xfer_buff;     /*!< Pointer to transfer buffer                                               */

  uint32_t  dma_addr;       /*!< 32 bits aligned transfer buffer address                                  */

  uint32_t  xfer_len;       /*!< Current transfer length                                                  */

  uint32_t  xfer_count;     /*!< Partial transfer length in case of multi packet transfer                 */

}USB_OTG_EPTypeDef;

/** 
  * @brief  OTG HC Initialization Structure definition 
  */
typedef struct
{
  uint8_t   dev_addr ;     /*!< USB device address.
                                This parameter must be a number between Min_Data = 1 and Max_Data = 255    */

  uint8_t   ch_num;        /*!< Host channel number.
                                This parameter must be a number between Min_Data = 1 and Max_Data = 15     */

  uint8_t   ep_num;        /*!< Endpoint number.
                                This parameter must be a number between Min_Data = 1 and Max_Data = 15     */

  uint8_t   ep_is_in;      /*!< Endpoint direction
                                This parameter must be a number between Min_Data = 0 and Max_Data = 1      */

  uint8_t   speed;         /*!< USB Host speed.
                                This parameter can be any value of @ref USB_Core_Speed_                    */

  uint8_t   do_ping;       /*!< Enable or disable the use of the PING protocol for HS mode.                */

  uint8_t   process_ping;  /*!< Execute the PING protocol for HS mode.                                     */

  uint8_t   ep_type;       /*!< Endpoint Type.
                                This parameter can be any value of @ref USB_EP_Type_                       */

  uint16_t  max_packet;    /*!< Endpoint Max packet size.
                                This parameter must be a number between Min_Data = 0 and Max_Data = 64KB   */

  uint8_t   data_pid;      /*!< Initial data PID.
                                This parameter must be a number between Min_Data = 0 and Max_Data = 1      */

  uint8_t   *xfer_buff;    /*!< Pointer to transfer buffer.                                                */

  uint32_t  xfer_len;      /*!< Current transfer length.                                                   */

  uint32_t  xfer_count;    /*!< Partial transfer length in case of multi packet transfer.                  */

  uint8_t   toggle_in;     /*!< IN transfer current toggle flag.
                                This parameter must be a number between Min_Data = 0 and Max_Data = 1      */

  uint8_t   toggle_out;    /*!< OUT transfer current toggle flag
                                This parameter must be a number between Min_Data = 0 and Max_Data = 1      */

  uint32_t  dma_addr;      /*!< 32 bits aligned transfer buffer address.                                   */

  uint32_t  ErrCnt;        /*!< Host channel error count.*/

  USB_OTG_URBStateTypeDef  urb_state;  /*!< URB state. 
                                           This parameter can be any value of @ref USB_OTG_URBStateTypeDef */

  USB_OTG_HCStateTypeDef   state;     /*!< Host Channel state. 
                                           This parameter can be any value of @ref USB_OTG_HCStateTypeDef  */

}USB_OTG_HCTypeDef;
  
/* Exported constants --------------------------------------------------------*/

/** @defgroup PCD_Exported_Constants PCD Exported Constants
  * @{
  */

/** @defgroup USB_Core_Mode_ USB Core Mode
  * @{
  */
#define USB_OTG_MODE_DEVICE                    0U
#define USB_OTG_MODE_HOST                      1U
#define USB_OTG_MODE_DRD                       2U
/**
  * @}
  */

/** @defgroup USB_Core_Speed_   USB Core Speed
  * @{
  */  
#define USB_OTG_SPEED_HIGH                     0U
#define USB_OTG_SPEED_HIGH_IN_FULL             1U
#define USB_OTG_SPEED_LOW                      2U
#define USB_OTG_SPEED_FULL                     3U
/**
  * @}
  */
  
/** @defgroup USB_Core_PHY_   USB Core PHY
  * @{
  */   
#define USB_OTG_ULPI_PHY                       1U
#define USB_OTG_EMBEDDED_PHY                   2U
/**
  * @}
  */
  
/** @defgroup USB_Core_MPS_   USB Core MPS
  * @{
  */
#define USB_OTG_HS_MAX_PACKET_SIZE           512U
#define USB_OTG_FS_MAX_PACKET_SIZE           64U
#define USB_OTG_MAX_EP0_SIZE                 64U
/**
  * @}
  */

/** @defgroup USB_Core_Phy_Frequency_   USB Core Phy Frequency
  * @{
  */
#define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ     (0U << 1U)
#define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ     (1U << 1U)
#define DSTS_ENUMSPD_LS_PHY_6MHZ               (2U << 1U)
#define DSTS_ENUMSPD_FS_PHY_48MHZ              (3U << 1U)
/**
  * @}
  */
  
/** @defgroup USB_CORE_Frame_Interval_   USB CORE Frame Interval
  * @{
  */  
#define DCFG_FRAME_INTERVAL_80                 0U
#define DCFG_FRAME_INTERVAL_85                 1U
#define DCFG_FRAME_INTERVAL_90                 2U
#define DCFG_FRAME_INTERVAL_95                 3U
/**
  * @}
  */

/** @defgroup USB_EP0_MPS_  USB EP0 MPS
  * @{
  */
#define DEP0CTL_MPS_64                         0U
#define DEP0CTL_MPS_32                         1U
#define DEP0CTL_MPS_16                         2U
#define DEP0CTL_MPS_8                          3U
/**
  * @}
  */

/** @defgroup USB_EP_Speed_  USB EP Speed
  * @{
  */
#define EP_SPEED_LOW                           0U
#define EP_SPEED_FULL                          1U
#define EP_SPEED_HIGH                          2U
/**
  * @}
  */

/** @defgroup USB_EP_Type_  USB EP Type
  * @{
  */
#define EP_TYPE_CTRL                           0U
#define EP_TYPE_ISOC                           1U
#define EP_TYPE_BULK                           2U
#define EP_TYPE_INTR                           3U
#define EP_TYPE_MSK                            3U
/**
  * @}
  */

/** @defgroup USB_STS_Defines_   USB STS Defines
  * @{
  */
#define STS_GOUT_NAK                           1U
#define STS_DATA_UPDT                          2U
#define STS_XFER_COMP                          3U
#define STS_SETUP_COMP                         4U
#define STS_SETUP_UPDT                         6U
/**
  * @}
  */

/** @defgroup HCFG_SPEED_Defines_   HCFG SPEED Defines
  * @{
  */  
#define HCFG_30_60_MHZ                         0U
#define HCFG_48_MHZ                            1U
#define HCFG_6_MHZ                             2U
/**
  * @}
  */
    
/** @defgroup HPRT0_PRTSPD_SPEED_Defines_  HPRT0 PRTSPD SPEED Defines
  * @{
  */    
#define HPRT0_PRTSPD_HIGH_SPEED                0U
#define HPRT0_PRTSPD_FULL_SPEED                1U
#define HPRT0_PRTSPD_LOW_SPEED                 2U
/**
  * @}
  */  
   
#define HCCHAR_CTRL                            0U
#define HCCHAR_ISOC                            1U
#define HCCHAR_BULK                            2U
#define HCCHAR_INTR                            3U
       
#define HC_PID_DATA0                           0U
#define HC_PID_DATA2                           1U
#define HC_PID_DATA1                           2U
#define HC_PID_SETUP                           3U

#define GRXSTS_PKTSTS_IN                       2U
#define GRXSTS_PKTSTS_IN_XFER_COMP             3U
#define GRXSTS_PKTSTS_DATA_TOGGLE_ERR          5U
#define GRXSTS_PKTSTS_CH_HALTED                7U
    
#define USBx_PCGCCTL    *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_PCGCCTL_BASE)
#define USBx_HPRT0      *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_HOST_PORT_BASE)

#define USBx_DEVICE     ((USB_OTG_DeviceTypeDef *)((uint32_t )USBx + USB_OTG_DEVICE_BASE)) 
#define USBx_INEP(i)    ((USB_OTG_INEndpointTypeDef *)((uint32_t)USBx + USB_OTG_IN_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))
#define USBx_OUTEP(i)   ((USB_OTG_OUTEndpointTypeDef *)((uint32_t)USBx + USB_OTG_OUT_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))
#define USBx_DFIFO(i)   *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_FIFO_BASE + (i) * USB_OTG_FIFO_SIZE)

#define USBx_HOST       ((USB_OTG_HostTypeDef *)((uint32_t )USBx + USB_OTG_HOST_BASE))
#define USBx_HC(i)      ((USB_OTG_HostChannelTypeDef *)((uint32_t)USBx + USB_OTG_HOST_CHANNEL_BASE + (i)*USB_OTG_HOST_CHANNEL_SIZE))
/**
  * @}
  */
/* Exported macro ------------------------------------------------------------*/
#define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__)     ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__))
#define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__)   ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__))
    
#define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__)          (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__))
#define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__)         (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__))

/* Exported functions --------------------------------------------------------*/
HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init);
HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init);
HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx , USB_OTG_ModeTypeDef mode);
HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx , uint8_t speed);
HAL_StatusTypeDef USB_FlushRxFifo (USB_OTG_GlobalTypeDef *USBx);
HAL_StatusTypeDef USB_FlushTxFifo (USB_OTG_GlobalTypeDef *USBx, uint32_t num );
HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma);
HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma);
HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len, uint8_t dma);
void *            USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len);
HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep);
HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep);
HAL_StatusTypeDef USB_SetDevAddress (USB_OTG_GlobalTypeDef *USBx, uint8_t address);
HAL_StatusTypeDef USB_DevConnect (USB_OTG_GlobalTypeDef *USBx);
HAL_StatusTypeDef USB_DevDisconnect (USB_OTG_GlobalTypeDef *USBx);
HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx);
HAL_StatusTypeDef USB_ActivateSetup (USB_OTG_GlobalTypeDef *USBx);
HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup);
uint8_t           USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx);
uint32_t          USB_GetMode(USB_OTG_GlobalTypeDef *USBx);
uint32_t          USB_ReadInterrupts (USB_OTG_GlobalTypeDef *USBx);
uint32_t          USB_ReadDevAllOutEpInterrupt (USB_OTG_GlobalTypeDef *USBx);
uint32_t          USB_ReadDevOutEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum);
uint32_t          USB_ReadDevAllInEpInterrupt (USB_OTG_GlobalTypeDef *USBx);
uint32_t          USB_ReadDevInEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum);
void              USB_ClearInterrupts (USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt);

HAL_StatusTypeDef USB_HostInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg);
HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx , uint8_t freq);
HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx);
HAL_StatusTypeDef USB_DriveVbus (USB_OTG_GlobalTypeDef *USBx, uint8_t state);
uint32_t          USB_GetHostSpeed (USB_OTG_GlobalTypeDef *USBx);
uint32_t          USB_GetCurrentFrame (USB_OTG_GlobalTypeDef *USBx);
HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx,  
                                  uint8_t ch_num,
                                  uint8_t epnum,
                                  uint8_t dev_address,
                                  uint8_t speed,
                                  uint8_t ep_type,
                                  uint16_t mps);
HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma);
uint32_t          USB_HC_ReadInterrupt (USB_OTG_GlobalTypeDef *USBx);
HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx , uint8_t hc_num);
HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx , uint8_t ch_num);
HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx);

/**
  * @}
  */ 

/**
  * @}
  */
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
          STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx ||
          STM32F412Vx || STM32F412Cx || STM32F413xx || STM32F423xx */
#ifdef __cplusplus
}
#endif


#endif /* __STM32F4xx_LL_USB_H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/