Mercurial > public > ostc4
view Small_CPU/Src/rtc.c @ 240:625d20070261 div-fixes-5
Improvement SPI stability/recoverability
The core part of this commit comes from careful code reading. The core is the
swap of Scheduler_Request_sync_with_SPI(SPI_SYNC_METHOD_SOFT) and
SPI_Start_single_TxRx_with_Master(). This code is sitting in an if-clause
that is triggered on SPI comms failure. Instead of blindly trying to
communicate again (which will very likely fail again), first try to reset
the comms link, and then try to communicate again. That simply makes
more sense in this case.
This is heavily tested, on 2 simple dives, and 5 very long deco schedules
from the simulator (10+ hour deco's), and a lot of small simulated dives
(upto 2h runtime). Of all these tests, only one long session failed after
9 out of 11h runtime. Analyzing that one failure, suggests that the
RTE is looping in some error handler, which (obviously) results in
a SPI comms failure as a result. I consider this not part of this change.
Additionally, some more cleanup is done in this code.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
author | Jan Mulder <jlmulder@xs4all.nl> |
---|---|
date | Mon, 08 Apr 2019 11:49:13 +0200 |
parents | f0069f002c55 |
children |
line wrap: on
line source
/** ****************************************************************************** * @file rtc.c * @author heinrichs weikamp gmbh * @version V0.0.1 * @date 10-Oct-2014 * @brief Source code for rtc control * @verbatim ============================================================================== ##### How to use ##### ============================================================================== @endverbatim ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2015 heinrichs weikamp</center></h2> * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "rtc.h" #include "stm32f4xx_hal.h" #include "stm32f4xx_hal_conf.h" #include "baseCPU2.h" RTC_HandleTypeDef RTCHandle; static void RTC_Error_Handler(void); void RTC_SetTime(RTC_TimeTypeDef stimestructure) { stimestructure.SubSeconds = 0; stimestructure.TimeFormat = RTC_HOURFORMAT_24; stimestructure.DayLightSaving = RTC_DAYLIGHTSAVING_NONE ; stimestructure.StoreOperation = RTC_STOREOPERATION_RESET; if(HAL_RTC_SetTime(&RTCHandle, &stimestructure, FORMAT_BIN) != HAL_OK) { RTC_Error_Handler(); } } void RTC_SetDate(RTC_DateTypeDef sdatestructure) { if(HAL_RTC_SetDate(&RTCHandle, &sdatestructure, FORMAT_BIN) != HAL_OK) { RTC_Error_Handler(); } } /* static void RTC_CalendarConfig(void) { RTC_DateTypeDef sdatestructure; RTC_TimeTypeDef stimestructure; //##-1- Configure the Date ################################################# // Set Date: Monday April 14th 2014 sdatestructure.Year = 0; sdatestructure.Month = RTC_MONTH_JANUARY; sdatestructure.Date = 1; sdatestructure.WeekDay = RTC_WEEKDAY_MONDAY; if(HAL_RTC_SetDate(&RTCHandle,&sdatestructure,FORMAT_BCD) != HAL_OK) { RTC_Error_Handler(); } //##-2- Configure the Time ################################################# // Set Time: 02:00:00 stimestructure.Hours = 0; stimestructure.Minutes = 0; stimestructure.Seconds = 0; stimestructure.DayLightSaving = RTC_DAYLIGHTSAVING_NONE ; stimestructure.StoreOperation = RTC_STOREOPERATION_RESET; if(HAL_RTC_SetTime(&RTCHandle,&stimestructure,FORMAT_BCD) != HAL_OK) { RTC_Error_Handler(); } //##-3- Writes a data in a RTC Backup data Register0 ####################### // HAL_RTCEx_BKUPWrite(&RTCHandle,RTC_BKP_DR0,0x32F2); } */ /* ##-1- Configure the RTC peripheral ####################################### Configure RTC prescaler and RTC data registers RTC configured as follow: - Hour Format = Format 24 - Asynch Prediv = Value according to source clock - Synch Prediv = Value according to source clock - OutPut = Output Disable - OutPutPolarity = High Polarity - OutPutType = Open Drain */ void MX_RTC_init(void) { /* Initialize RTC */ RTCHandle.Instance = RTC; RTCHandle.Init.HourFormat = RTC_HOURFORMAT_24; RTCHandle.Init.AsynchPrediv = 127; RTCHandle.Init.SynchPrediv = 255; RTCHandle.Init.OutPut = RTC_OUTPUT_DISABLE; RTCHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH; RTCHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN; HAL_RTC_Init(&RTCHandle); } void RTC_StopMode_2seconds(void) { /* Enable Power Control clock */ __HAL_RCC_PWR_CLK_ENABLE(); /* Disable Wake-up timer */ HAL_RTCEx_DeactivateWakeUpTimer(&RTCHandle); /* Enable Wake-up timer */ HAL_RTCEx_SetWakeUpTimer_IT(&RTCHandle, (0x1000-1), RTC_WAKEUPCLOCK_RTCCLK_DIV16); /* FLASH Deep Power Down Mode enabled */ HAL_PWREx_EnableFlashPowerDown(); /*## Enter Stop Mode #######################################################*/ HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI); /* Configures system clock after wake-up from STOP: enable HSI, PLL and select PLL as system clock source (HSI and PLL are disabled in STOP mode) */ SYSCLKConfig_STOP(); HAL_RTCEx_DeactivateWakeUpTimer(&RTCHandle); } void RTC_Stop_11ms(void) { /* Disable Wake-up timer */ HAL_RTCEx_DeactivateWakeUpTimer(&RTCHandle); /* Enable Wake-up timer */ HAL_RTCEx_SetWakeUpTimer_IT(&RTCHandle, (0x18-1), RTC_WAKEUPCLOCK_RTCCLK_DIV16); /* FLASH Deep Power Down Mode enabled */ HAL_PWREx_DisableFlashPowerDown(); /*## Enter Stop Mode #######################################################*/ HAL_PWR_EnterSTOPMode(PWR_MAINREGULATOR_ON, PWR_STOPENTRY_WFI); /* Configures system clock after wake-up from STOP: enable HSI, PLL and select PLL as system clock source (HSI and PLL are disabled in STOP mode) */ SYSCLKConfig_STOP(); HAL_RTCEx_DeactivateWakeUpTimer(&RTCHandle); } static void RTC_Error_Handler(void) { while(1); } /************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/