Mercurial > public > ostc4
view Common/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_bus.h @ 882:608d3e918146 Evo_2_23
Added slow exit timer function:
At the end of the dive the final ascent to surface should be done slowly. The new function provides a comparison of the current divers depth compared to a linear ascent simulated by the OSTC. The visualization is shown instead of the ascent speed with a little different appearance. The linear ascent is starting from the last stop depth and the time for the ascent may be configurated in the deco settings. The simulated and real peth is compared and the depth color changes based on the difference of the values. In case the diver is much below the timer depth then the timer will stop and wait for the diver to follow.
| author | Ideenmodellierer |
|---|---|
| date | Sat, 31 Aug 2024 17:35:52 +0200 |
| parents | c78bcbd5deda |
| children |
line wrap: on
line source
/** ****************************************************************************** * @file stm32f4xx_ll_bus.h * @author MCD Application Team * @brief Header file of BUS LL module. @verbatim ##### RCC Limitations ##### ============================================================================== [..] A delay between an RCC peripheral clock enable and the effective peripheral enabling should be taken into account in order to manage the peripheral read/write from/to registers. (+) This delay depends on the peripheral mapping. (++) AHB & APB peripherals, 1 dummy read is necessary [..] Workarounds: (#) For AHB & APB peripherals, a dummy read to the peripheral register has been inserted in each LL_{BUS}_GRP{x}_EnableClock() function. @endverbatim ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_LL_BUS_H #define __STM32F4xx_LL_BUS_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx.h" /** @addtogroup STM32F4xx_LL_Driver * @{ */ #if defined(RCC) /** @defgroup BUS_LL BUS * @{ */ /* Private types -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private constants ---------------------------------------------------------*/ /* Private macros ------------------------------------------------------------*/ /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ /** @defgroup BUS_LL_Exported_Constants BUS Exported Constants * @{ */ /** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH * @{ */ #define LL_AHB1_GRP1_PERIPH_ALL 0xFFFFFFFFU #define LL_AHB1_GRP1_PERIPH_GPIOA RCC_AHB1ENR_GPIOAEN #define LL_AHB1_GRP1_PERIPH_GPIOB RCC_AHB1ENR_GPIOBEN #define LL_AHB1_GRP1_PERIPH_GPIOC RCC_AHB1ENR_GPIOCEN #if defined(GPIOD) #define LL_AHB1_GRP1_PERIPH_GPIOD RCC_AHB1ENR_GPIODEN #endif /* GPIOD */ #if defined(GPIOE) #define LL_AHB1_GRP1_PERIPH_GPIOE RCC_AHB1ENR_GPIOEEN #endif /* GPIOE */ #if defined(GPIOF) #define LL_AHB1_GRP1_PERIPH_GPIOF RCC_AHB1ENR_GPIOFEN #endif /* GPIOF */ #if defined(GPIOG) #define LL_AHB1_GRP1_PERIPH_GPIOG RCC_AHB1ENR_GPIOGEN #endif /* GPIOG */ #if defined(GPIOH) #define LL_AHB1_GRP1_PERIPH_GPIOH RCC_AHB1ENR_GPIOHEN #endif /* GPIOH */ #if defined(GPIOI) #define LL_AHB1_GRP1_PERIPH_GPIOI RCC_AHB1ENR_GPIOIEN #endif /* GPIOI */ #if defined(GPIOJ) #define LL_AHB1_GRP1_PERIPH_GPIOJ RCC_AHB1ENR_GPIOJEN #endif /* GPIOJ */ #if defined(GPIOK) #define LL_AHB1_GRP1_PERIPH_GPIOK RCC_AHB1ENR_GPIOKEN #endif /* GPIOK */ #define LL_AHB1_GRP1_PERIPH_CRC RCC_AHB1ENR_CRCEN #if defined(RCC_AHB1ENR_BKPSRAMEN) #define LL_AHB1_GRP1_PERIPH_BKPSRAM RCC_AHB1ENR_BKPSRAMEN #endif /* RCC_AHB1ENR_BKPSRAMEN */ #if defined(RCC_AHB1ENR_CCMDATARAMEN) #define LL_AHB1_GRP1_PERIPH_CCMDATARAM RCC_AHB1ENR_CCMDATARAMEN #endif /* RCC_AHB1ENR_CCMDATARAMEN */ #define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHB1ENR_DMA1EN #define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHB1ENR_DMA2EN #if defined(RCC_AHB1ENR_RNGEN) #define LL_AHB1_GRP1_PERIPH_RNG RCC_AHB1ENR_RNGEN #endif /* RCC_AHB1ENR_RNGEN */ #if defined(DMA2D) #define LL_AHB1_GRP1_PERIPH_DMA2D RCC_AHB1ENR_DMA2DEN #endif /* DMA2D */ #if defined(ETH) #define LL_AHB1_GRP1_PERIPH_ETHMAC RCC_AHB1ENR_ETHMACEN #define LL_AHB1_GRP1_PERIPH_ETHMACTX RCC_AHB1ENR_ETHMACTXEN #define LL_AHB1_GRP1_PERIPH_ETHMACRX RCC_AHB1ENR_ETHMACRXEN #define LL_AHB1_GRP1_PERIPH_ETHMACPTP RCC_AHB1ENR_ETHMACPTPEN #endif /* ETH */ #if defined(USB_OTG_HS) #define LL_AHB1_GRP1_PERIPH_OTGHS RCC_AHB1ENR_OTGHSEN #define LL_AHB1_GRP1_PERIPH_OTGHSULPI RCC_AHB1ENR_OTGHSULPIEN #endif /* USB_OTG_HS */ #define LL_AHB1_GRP1_PERIPH_FLITF RCC_AHB1LPENR_FLITFLPEN #define LL_AHB1_GRP1_PERIPH_SRAM1 RCC_AHB1LPENR_SRAM1LPEN #if defined(RCC_AHB1LPENR_SRAM2LPEN) #define LL_AHB1_GRP1_PERIPH_SRAM2 RCC_AHB1LPENR_SRAM2LPEN #endif /* RCC_AHB1LPENR_SRAM2LPEN */ #if defined(RCC_AHB1LPENR_SRAM3LPEN) #define LL_AHB1_GRP1_PERIPH_SRAM3 RCC_AHB1LPENR_SRAM3LPEN #endif /* RCC_AHB1LPENR_SRAM3LPEN */ /** * @} */ #if defined(RCC_AHB2_SUPPORT) /** @defgroup BUS_LL_EC_AHB2_GRP1_PERIPH AHB2 GRP1 PERIPH * @{ */ #define LL_AHB2_GRP1_PERIPH_ALL 0xFFFFFFFFU #if defined(DCMI) #define LL_AHB2_GRP1_PERIPH_DCMI RCC_AHB2ENR_DCMIEN #endif /* DCMI */ #if defined(CRYP) #define LL_AHB2_GRP1_PERIPH_CRYP RCC_AHB2ENR_CRYPEN #endif /* CRYP */ #if defined(AES) #define LL_AHB2_GRP1_PERIPH_AES RCC_AHB2ENR_AESEN #endif /* AES */ #if defined(HASH) #define LL_AHB2_GRP1_PERIPH_HASH RCC_AHB2ENR_HASHEN #endif /* HASH */ #if defined(RCC_AHB2ENR_RNGEN) #define LL_AHB2_GRP1_PERIPH_RNG RCC_AHB2ENR_RNGEN #endif /* RCC_AHB2ENR_RNGEN */ #if defined(USB_OTG_FS) #define LL_AHB2_GRP1_PERIPH_OTGFS RCC_AHB2ENR_OTGFSEN #endif /* USB_OTG_FS */ /** * @} */ #endif /* RCC_AHB2_SUPPORT */ #if defined(RCC_AHB3_SUPPORT) /** @defgroup BUS_LL_EC_AHB3_GRP1_PERIPH AHB3 GRP1 PERIPH * @{ */ #define LL_AHB3_GRP1_PERIPH_ALL 0xFFFFFFFFU #if defined(FSMC_Bank1) #define LL_AHB3_GRP1_PERIPH_FSMC RCC_AHB3ENR_FSMCEN #endif /* FSMC_Bank1 */ #if defined(FMC_Bank1) #define LL_AHB3_GRP1_PERIPH_FMC RCC_AHB3ENR_FMCEN #endif /* FMC_Bank1 */ #if defined(QUADSPI) #define LL_AHB3_GRP1_PERIPH_QSPI RCC_AHB3ENR_QSPIEN #endif /* QUADSPI */ /** * @} */ #endif /* RCC_AHB3_SUPPORT */ /** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH * @{ */ #define LL_APB1_GRP1_PERIPH_ALL 0xFFFFFFFFU #if defined(TIM2) #define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1ENR_TIM2EN #endif /* TIM2 */ #if defined(TIM3) #define LL_APB1_GRP1_PERIPH_TIM3 RCC_APB1ENR_TIM3EN #endif /* TIM3 */ #if defined(TIM4) #define LL_APB1_GRP1_PERIPH_TIM4 RCC_APB1ENR_TIM4EN #endif /* TIM4 */ #define LL_APB1_GRP1_PERIPH_TIM5 RCC_APB1ENR_TIM5EN #if defined(TIM6) #define LL_APB1_GRP1_PERIPH_TIM6 RCC_APB1ENR_TIM6EN #endif /* TIM6 */ #if defined(TIM7) #define LL_APB1_GRP1_PERIPH_TIM7 RCC_APB1ENR_TIM7EN #endif /* TIM7 */ #if defined(TIM12) #define LL_APB1_GRP1_PERIPH_TIM12 RCC_APB1ENR_TIM12EN #endif /* TIM12 */ #if defined(TIM13) #define LL_APB1_GRP1_PERIPH_TIM13 RCC_APB1ENR_TIM13EN #endif /* TIM13 */ #if defined(TIM14) #define LL_APB1_GRP1_PERIPH_TIM14 RCC_APB1ENR_TIM14EN #endif /* TIM14 */ #if defined(LPTIM1) #define LL_APB1_GRP1_PERIPH_LPTIM1 RCC_APB1ENR_LPTIM1EN #endif /* LPTIM1 */ #if defined(RCC_APB1ENR_RTCAPBEN) #define LL_APB1_GRP1_PERIPH_RTCAPB RCC_APB1ENR_RTCAPBEN #endif /* RCC_APB1ENR_RTCAPBEN */ #define LL_APB1_GRP1_PERIPH_WWDG RCC_APB1ENR_WWDGEN #if defined(SPI2) #define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1ENR_SPI2EN #endif /* SPI2 */ #if defined(SPI3) #define LL_APB1_GRP1_PERIPH_SPI3 RCC_APB1ENR_SPI3EN #endif /* SPI3 */ #if defined(SPDIFRX) #define LL_APB1_GRP1_PERIPH_SPDIFRX RCC_APB1ENR_SPDIFRXEN #endif /* SPDIFRX */ #define LL_APB1_GRP1_PERIPH_USART2 RCC_APB1ENR_USART2EN #if defined(USART3) #define LL_APB1_GRP1_PERIPH_USART3 RCC_APB1ENR_USART3EN #endif /* USART3 */ #if defined(UART4) #define LL_APB1_GRP1_PERIPH_UART4 RCC_APB1ENR_UART4EN #endif /* UART4 */ #if defined(UART5) #define LL_APB1_GRP1_PERIPH_UART5 RCC_APB1ENR_UART5EN #endif /* UART5 */ #define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1ENR_I2C1EN #define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1ENR_I2C2EN #if defined(I2C3) #define LL_APB1_GRP1_PERIPH_I2C3 RCC_APB1ENR_I2C3EN #endif /* I2C3 */ #if defined(FMPI2C1) #define LL_APB1_GRP1_PERIPH_FMPI2C1 RCC_APB1ENR_FMPI2C1EN #endif /* FMPI2C1 */ #if defined(CAN1) #define LL_APB1_GRP1_PERIPH_CAN1 RCC_APB1ENR_CAN1EN #endif /* CAN1 */ #if defined(CAN2) #define LL_APB1_GRP1_PERIPH_CAN2 RCC_APB1ENR_CAN2EN #endif /* CAN2 */ #if defined(CAN3) #define LL_APB1_GRP1_PERIPH_CAN3 RCC_APB1ENR_CAN3EN #endif /* CAN3 */ #if defined(CEC) #define LL_APB1_GRP1_PERIPH_CEC RCC_APB1ENR_CECEN #endif /* CEC */ #define LL_APB1_GRP1_PERIPH_PWR RCC_APB1ENR_PWREN #if defined(DAC1) #define LL_APB1_GRP1_PERIPH_DAC1 RCC_APB1ENR_DACEN #endif /* DAC1 */ #if defined(UART7) #define LL_APB1_GRP1_PERIPH_UART7 RCC_APB1ENR_UART7EN #endif /* UART7 */ #if defined(UART8) #define LL_APB1_GRP1_PERIPH_UART8 RCC_APB1ENR_UART8EN #endif /* UART8 */ /** * @} */ /** @defgroup BUS_LL_EC_APB2_GRP1_PERIPH APB2 GRP1 PERIPH * @{ */ #define LL_APB2_GRP1_PERIPH_ALL 0xFFFFFFFFU #define LL_APB2_GRP1_PERIPH_TIM1 RCC_APB2ENR_TIM1EN #if defined(TIM8) #define LL_APB2_GRP1_PERIPH_TIM8 RCC_APB2ENR_TIM8EN #endif /* TIM8 */ #define LL_APB2_GRP1_PERIPH_USART1 RCC_APB2ENR_USART1EN #if defined(USART6) #define LL_APB2_GRP1_PERIPH_USART6 RCC_APB2ENR_USART6EN #endif /* USART6 */ #if defined(UART9) #define LL_APB2_GRP1_PERIPH_UART9 RCC_APB2ENR_UART9EN #endif /* UART9 */ #if defined(UART10) #define LL_APB2_GRP1_PERIPH_UART10 RCC_APB2ENR_UART10EN #endif /* UART10 */ #define LL_APB2_GRP1_PERIPH_ADC1 RCC_APB2ENR_ADC1EN #if defined(ADC2) #define LL_APB2_GRP1_PERIPH_ADC2 RCC_APB2ENR_ADC2EN #endif /* ADC2 */ #if defined(ADC3) #define LL_APB2_GRP1_PERIPH_ADC3 RCC_APB2ENR_ADC3EN #endif /* ADC3 */ #if defined(SDIO) #define LL_APB2_GRP1_PERIPH_SDIO RCC_APB2ENR_SDIOEN #endif /* SDIO */ #define LL_APB2_GRP1_PERIPH_SPI1 RCC_APB2ENR_SPI1EN #if defined(SPI4) #define LL_APB2_GRP1_PERIPH_SPI4 RCC_APB2ENR_SPI4EN #endif /* SPI4 */ #define LL_APB2_GRP1_PERIPH_SYSCFG RCC_APB2ENR_SYSCFGEN #if defined(RCC_APB2ENR_EXTITEN) #define LL_APB2_GRP1_PERIPH_EXTI RCC_APB2ENR_EXTITEN #endif /* RCC_APB2ENR_EXTITEN */ #define LL_APB2_GRP1_PERIPH_TIM9 RCC_APB2ENR_TIM9EN #if defined(TIM10) #define LL_APB2_GRP1_PERIPH_TIM10 RCC_APB2ENR_TIM10EN #endif /* TIM10 */ #define LL_APB2_GRP1_PERIPH_TIM11 RCC_APB2ENR_TIM11EN #if defined(SPI5) #define LL_APB2_GRP1_PERIPH_SPI5 RCC_APB2ENR_SPI5EN #endif /* SPI5 */ #if defined(SPI6) #define LL_APB2_GRP1_PERIPH_SPI6 RCC_APB2ENR_SPI6EN #endif /* SPI6 */ #if defined(SAI1) #define LL_APB2_GRP1_PERIPH_SAI1 RCC_APB2ENR_SAI1EN #endif /* SAI1 */ #if defined(SAI2) #define LL_APB2_GRP1_PERIPH_SAI2 RCC_APB2ENR_SAI2EN #endif /* SAI2 */ #if defined(LTDC) #define LL_APB2_GRP1_PERIPH_LTDC RCC_APB2ENR_LTDCEN #endif /* LTDC */ #if defined(DSI) #define LL_APB2_GRP1_PERIPH_DSI RCC_APB2ENR_DSIEN #endif /* DSI */ #if defined(DFSDM1_Channel0) #define LL_APB2_GRP1_PERIPH_DFSDM1 RCC_APB2ENR_DFSDM1EN #endif /* DFSDM1_Channel0 */ #if defined(DFSDM2_Channel0) #define LL_APB2_GRP1_PERIPH_DFSDM2 RCC_APB2ENR_DFSDM2EN #endif /* DFSDM2_Channel0 */ #define LL_APB2_GRP1_PERIPH_ADC RCC_APB2RSTR_ADCRST /** * @} */ /** * @} */ /* Exported macro ------------------------------------------------------------*/ /* Exported functions --------------------------------------------------------*/ /** @defgroup BUS_LL_Exported_Functions BUS Exported Functions * @{ */ /** @defgroup BUS_LL_EF_AHB1 AHB1 * @{ */ /** * @brief Enable AHB1 peripherals clock. * @rmtoll AHB1ENR GPIOAEN LL_AHB1_GRP1_EnableClock\n * AHB1ENR GPIOBEN LL_AHB1_GRP1_EnableClock\n * AHB1ENR GPIOCEN LL_AHB1_GRP1_EnableClock\n * AHB1ENR GPIODEN LL_AHB1_GRP1_EnableClock\n * AHB1ENR GPIOEEN LL_AHB1_GRP1_EnableClock\n * AHB1ENR GPIOFEN LL_AHB1_GRP1_EnableClock\n * AHB1ENR GPIOGEN LL_AHB1_GRP1_EnableClock\n * AHB1ENR GPIOHEN LL_AHB1_GRP1_EnableClock\n * AHB1ENR GPIOIEN LL_AHB1_GRP1_EnableClock\n * AHB1ENR GPIOJEN LL_AHB1_GRP1_EnableClock\n * AHB1ENR GPIOKEN LL_AHB1_GRP1_EnableClock\n * AHB1ENR CRCEN LL_AHB1_GRP1_EnableClock\n * AHB1ENR BKPSRAMEN LL_AHB1_GRP1_EnableClock\n * AHB1ENR CCMDATARAMEN LL_AHB1_GRP1_EnableClock\n * AHB1ENR DMA1EN LL_AHB1_GRP1_EnableClock\n * AHB1ENR DMA2EN LL_AHB1_GRP1_EnableClock\n * AHB1ENR RNGEN LL_AHB1_GRP1_EnableClock\n * AHB1ENR DMA2DEN LL_AHB1_GRP1_EnableClock\n * AHB1ENR ETHMACEN LL_AHB1_GRP1_EnableClock\n * AHB1ENR ETHMACTXEN LL_AHB1_GRP1_EnableClock\n * AHB1ENR ETHMACRXEN LL_AHB1_GRP1_EnableClock\n * AHB1ENR ETHMACPTPEN LL_AHB1_GRP1_EnableClock\n * AHB1ENR OTGHSEN LL_AHB1_GRP1_EnableClock\n * AHB1ENR OTGHSULPIEN LL_AHB1_GRP1_EnableClock * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) * @arg @ref LL_AHB1_GRP1_PERIPH_CRC * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM (*) * @arg @ref LL_AHB1_GRP1_PERIPH_CCMDATARAM (*) * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*) * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*) * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*) * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI (*) * * (*) value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs) { __IO uint32_t tmpreg; SET_BIT(RCC->AHB1ENR, Periphs); /* Delay after an RCC peripheral clock enabling */ tmpreg = READ_BIT(RCC->AHB1ENR, Periphs); (void)tmpreg; } /** * @brief Check if AHB1 peripheral clock is enabled or not * @rmtoll AHB1ENR GPIOAEN LL_AHB1_GRP1_IsEnabledClock\n * AHB1ENR GPIOBEN LL_AHB1_GRP1_IsEnabledClock\n * AHB1ENR GPIOCEN LL_AHB1_GRP1_IsEnabledClock\n * AHB1ENR GPIODEN LL_AHB1_GRP1_IsEnabledClock\n * AHB1ENR GPIOEEN LL_AHB1_GRP1_IsEnabledClock\n * AHB1ENR GPIOFEN LL_AHB1_GRP1_IsEnabledClock\n * AHB1ENR GPIOGEN LL_AHB1_GRP1_IsEnabledClock\n * AHB1ENR GPIOHEN LL_AHB1_GRP1_IsEnabledClock\n * AHB1ENR GPIOIEN LL_AHB1_GRP1_IsEnabledClock\n * AHB1ENR GPIOJEN LL_AHB1_GRP1_IsEnabledClock\n * AHB1ENR GPIOKEN LL_AHB1_GRP1_IsEnabledClock\n * AHB1ENR CRCEN LL_AHB1_GRP1_IsEnabledClock\n * AHB1ENR BKPSRAMEN LL_AHB1_GRP1_IsEnabledClock\n * AHB1ENR CCMDATARAMEN LL_AHB1_GRP1_IsEnabledClock\n * AHB1ENR DMA1EN LL_AHB1_GRP1_IsEnabledClock\n * AHB1ENR DMA2EN LL_AHB1_GRP1_IsEnabledClock\n * AHB1ENR RNGEN LL_AHB1_GRP1_IsEnabledClock\n * AHB1ENR DMA2DEN LL_AHB1_GRP1_IsEnabledClock\n * AHB1ENR ETHMACEN LL_AHB1_GRP1_IsEnabledClock\n * AHB1ENR ETHMACTXEN LL_AHB1_GRP1_IsEnabledClock\n * AHB1ENR ETHMACRXEN LL_AHB1_GRP1_IsEnabledClock\n * AHB1ENR ETHMACPTPEN LL_AHB1_GRP1_IsEnabledClock\n * AHB1ENR OTGHSEN LL_AHB1_GRP1_IsEnabledClock\n * AHB1ENR OTGHSULPIEN LL_AHB1_GRP1_IsEnabledClock * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) * @arg @ref LL_AHB1_GRP1_PERIPH_CRC * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM (*) * @arg @ref LL_AHB1_GRP1_PERIPH_CCMDATARAM (*) * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*) * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*) * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*) * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI (*) * * (*) value not defined in all devices. * @retval State of Periphs (1 or 0). */ __STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs) { return (READ_BIT(RCC->AHB1ENR, Periphs) == Periphs); } /** * @brief Disable AHB1 peripherals clock. * @rmtoll AHB1ENR GPIOAEN LL_AHB1_GRP1_DisableClock\n * AHB1ENR GPIOBEN LL_AHB1_GRP1_DisableClock\n * AHB1ENR GPIOCEN LL_AHB1_GRP1_DisableClock\n * AHB1ENR GPIODEN LL_AHB1_GRP1_DisableClock\n * AHB1ENR GPIOEEN LL_AHB1_GRP1_DisableClock\n * AHB1ENR GPIOFEN LL_AHB1_GRP1_DisableClock\n * AHB1ENR GPIOGEN LL_AHB1_GRP1_DisableClock\n * AHB1ENR GPIOHEN LL_AHB1_GRP1_DisableClock\n * AHB1ENR GPIOIEN LL_AHB1_GRP1_DisableClock\n * AHB1ENR GPIOJEN LL_AHB1_GRP1_DisableClock\n * AHB1ENR GPIOKEN LL_AHB1_GRP1_DisableClock\n * AHB1ENR CRCEN LL_AHB1_GRP1_DisableClock\n * AHB1ENR BKPSRAMEN LL_AHB1_GRP1_DisableClock\n * AHB1ENR CCMDATARAMEN LL_AHB1_GRP1_DisableClock\n * AHB1ENR DMA1EN LL_AHB1_GRP1_DisableClock\n * AHB1ENR DMA2EN LL_AHB1_GRP1_DisableClock\n * AHB1ENR RNGEN LL_AHB1_GRP1_DisableClock\n * AHB1ENR DMA2DEN LL_AHB1_GRP1_DisableClock\n * AHB1ENR ETHMACEN LL_AHB1_GRP1_DisableClock\n * AHB1ENR ETHMACTXEN LL_AHB1_GRP1_DisableClock\n * AHB1ENR ETHMACRXEN LL_AHB1_GRP1_DisableClock\n * AHB1ENR ETHMACPTPEN LL_AHB1_GRP1_DisableClock\n * AHB1ENR OTGHSEN LL_AHB1_GRP1_DisableClock\n * AHB1ENR OTGHSULPIEN LL_AHB1_GRP1_DisableClock * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) * @arg @ref LL_AHB1_GRP1_PERIPH_CRC * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM (*) * @arg @ref LL_AHB1_GRP1_PERIPH_CCMDATARAM (*) * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*) * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*) * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*) * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI (*) * * (*) value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs) { CLEAR_BIT(RCC->AHB1ENR, Periphs); } /** * @brief Force AHB1 peripherals reset. * @rmtoll AHB1RSTR GPIOARST LL_AHB1_GRP1_ForceReset\n * AHB1RSTR GPIOBRST LL_AHB1_GRP1_ForceReset\n * AHB1RSTR GPIOCRST LL_AHB1_GRP1_ForceReset\n * AHB1RSTR GPIODRST LL_AHB1_GRP1_ForceReset\n * AHB1RSTR GPIOERST LL_AHB1_GRP1_ForceReset\n * AHB1RSTR GPIOFRST LL_AHB1_GRP1_ForceReset\n * AHB1RSTR GPIOGRST LL_AHB1_GRP1_ForceReset\n * AHB1RSTR GPIOHRST LL_AHB1_GRP1_ForceReset\n * AHB1RSTR GPIOIRST LL_AHB1_GRP1_ForceReset\n * AHB1RSTR GPIOJRST LL_AHB1_GRP1_ForceReset\n * AHB1RSTR GPIOKRST LL_AHB1_GRP1_ForceReset\n * AHB1RSTR CRCRST LL_AHB1_GRP1_ForceReset\n * AHB1RSTR DMA1RST LL_AHB1_GRP1_ForceReset\n * AHB1RSTR DMA2RST LL_AHB1_GRP1_ForceReset\n * AHB1RSTR RNGRST LL_AHB1_GRP1_ForceReset\n * AHB1RSTR DMA2DRST LL_AHB1_GRP1_ForceReset\n * AHB1RSTR ETHMACRST LL_AHB1_GRP1_ForceReset\n * AHB1RSTR OTGHSRST LL_AHB1_GRP1_ForceReset * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_AHB1_GRP1_PERIPH_ALL * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) * @arg @ref LL_AHB1_GRP1_PERIPH_CRC * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) * * (*) value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs) { SET_BIT(RCC->AHB1RSTR, Periphs); } /** * @brief Release AHB1 peripherals reset. * @rmtoll AHB1RSTR GPIOARST LL_AHB1_GRP1_ReleaseReset\n * AHB1RSTR GPIOBRST LL_AHB1_GRP1_ReleaseReset\n * AHB1RSTR GPIOCRST LL_AHB1_GRP1_ReleaseReset\n * AHB1RSTR GPIODRST LL_AHB1_GRP1_ReleaseReset\n * AHB1RSTR GPIOERST LL_AHB1_GRP1_ReleaseReset\n * AHB1RSTR GPIOFRST LL_AHB1_GRP1_ReleaseReset\n * AHB1RSTR GPIOGRST LL_AHB1_GRP1_ReleaseReset\n * AHB1RSTR GPIOHRST LL_AHB1_GRP1_ReleaseReset\n * AHB1RSTR GPIOIRST LL_AHB1_GRP1_ReleaseReset\n * AHB1RSTR GPIOJRST LL_AHB1_GRP1_ReleaseReset\n * AHB1RSTR GPIOKRST LL_AHB1_GRP1_ReleaseReset\n * AHB1RSTR CRCRST LL_AHB1_GRP1_ReleaseReset\n * AHB1RSTR DMA1RST LL_AHB1_GRP1_ReleaseReset\n * AHB1RSTR DMA2RST LL_AHB1_GRP1_ReleaseReset\n * AHB1RSTR RNGRST LL_AHB1_GRP1_ReleaseReset\n * AHB1RSTR DMA2DRST LL_AHB1_GRP1_ReleaseReset\n * AHB1RSTR ETHMACRST LL_AHB1_GRP1_ReleaseReset\n * AHB1RSTR OTGHSRST LL_AHB1_GRP1_ReleaseReset * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_AHB1_GRP1_PERIPH_ALL * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) * @arg @ref LL_AHB1_GRP1_PERIPH_CRC * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) * * (*) value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs) { CLEAR_BIT(RCC->AHB1RSTR, Periphs); } /** * @brief Enable AHB1 peripheral clocks in low-power mode * @rmtoll AHB1LPENR GPIOALPEN LL_AHB1_GRP1_EnableClockLowPower\n * AHB1LPENR GPIOBLPEN LL_AHB1_GRP1_EnableClockLowPower\n * AHB1LPENR GPIOCLPEN LL_AHB1_GRP1_EnableClockLowPower\n * AHB1LPENR GPIODLPEN LL_AHB1_GRP1_EnableClockLowPower\n * AHB1LPENR GPIOELPEN LL_AHB1_GRP1_EnableClockLowPower\n * AHB1LPENR GPIOFLPEN LL_AHB1_GRP1_EnableClockLowPower\n * AHB1LPENR GPIOGLPEN LL_AHB1_GRP1_EnableClockLowPower\n * AHB1LPENR GPIOHLPEN LL_AHB1_GRP1_EnableClockLowPower\n * AHB1LPENR GPIOILPEN LL_AHB1_GRP1_EnableClockLowPower\n * AHB1LPENR GPIOJLPEN LL_AHB1_GRP1_EnableClockLowPower\n * AHB1LPENR GPIOKLPEN LL_AHB1_GRP1_EnableClockLowPower\n * AHB1LPENR CRCLPEN LL_AHB1_GRP1_EnableClockLowPower\n * AHB1LPENR BKPSRAMLPEN LL_AHB1_GRP1_EnableClockLowPower\n * AHB1LPENR FLITFLPEN LL_AHB1_GRP1_EnableClockLowPower\n * AHB1LPENR SRAM1LPEN LL_AHB1_GRP1_EnableClockLowPower\n * AHB1LPENR SRAM2LPEN LL_AHB1_GRP1_EnableClockLowPower\n * AHB1LPENR SRAM3LPEN LL_AHB1_GRP1_EnableClockLowPower\n * AHB1LPENR BKPSRAMLPEN LL_AHB1_GRP1_EnableClockLowPower\n * AHB1LPENR DMA1LPEN LL_AHB1_GRP1_EnableClockLowPower\n * AHB1LPENR DMA2LPEN LL_AHB1_GRP1_EnableClockLowPower\n * AHB1LPENR DMA2DLPEN LL_AHB1_GRP1_EnableClockLowPower\n * AHB1LPENR RNGLPEN LL_AHB1_GRP1_EnableClockLowPower\n * AHB1LPENR ETHMACLPEN LL_AHB1_GRP1_EnableClockLowPower\n * AHB1LPENR ETHMACTXLPEN LL_AHB1_GRP1_EnableClockLowPower\n * AHB1LPENR ETHMACRXLPEN LL_AHB1_GRP1_EnableClockLowPower\n * AHB1LPENR ETHMACPTPLPEN LL_AHB1_GRP1_EnableClockLowPower\n * AHB1LPENR OTGHSLPEN LL_AHB1_GRP1_EnableClockLowPower\n * AHB1LPENR OTGHSULPILPEN LL_AHB1_GRP1_EnableClockLowPower * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) * @arg @ref LL_AHB1_GRP1_PERIPH_CRC * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM (*) * @arg @ref LL_AHB1_GRP1_PERIPH_FLITF * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM1 * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM2 (*) * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM3 (*) * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*) * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*) * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*) * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI (*) * * (*) value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_AHB1_GRP1_EnableClockLowPower(uint32_t Periphs) { __IO uint32_t tmpreg; SET_BIT(RCC->AHB1LPENR, Periphs); /* Delay after an RCC peripheral clock enabling */ tmpreg = READ_BIT(RCC->AHB1LPENR, Periphs); (void)tmpreg; } /** * @brief Disable AHB1 peripheral clocks in low-power mode * @rmtoll AHB1LPENR GPIOALPEN LL_AHB1_GRP1_DisableClockLowPower\n * AHB1LPENR GPIOBLPEN LL_AHB1_GRP1_DisableClockLowPower\n * AHB1LPENR GPIOCLPEN LL_AHB1_GRP1_DisableClockLowPower\n * AHB1LPENR GPIODLPEN LL_AHB1_GRP1_DisableClockLowPower\n * AHB1LPENR GPIOELPEN LL_AHB1_GRP1_DisableClockLowPower\n * AHB1LPENR GPIOFLPEN LL_AHB1_GRP1_DisableClockLowPower\n * AHB1LPENR GPIOGLPEN LL_AHB1_GRP1_DisableClockLowPower\n * AHB1LPENR GPIOHLPEN LL_AHB1_GRP1_DisableClockLowPower\n * AHB1LPENR GPIOILPEN LL_AHB1_GRP1_DisableClockLowPower\n * AHB1LPENR GPIOJLPEN LL_AHB1_GRP1_DisableClockLowPower\n * AHB1LPENR GPIOKLPEN LL_AHB1_GRP1_DisableClockLowPower\n * AHB1LPENR CRCLPEN LL_AHB1_GRP1_DisableClockLowPower\n * AHB1LPENR BKPSRAMLPEN LL_AHB1_GRP1_DisableClockLowPower\n * AHB1LPENR FLITFLPEN LL_AHB1_GRP1_DisableClockLowPower\n * AHB1LPENR SRAM1LPEN LL_AHB1_GRP1_DisableClockLowPower\n * AHB1LPENR SRAM2LPEN LL_AHB1_GRP1_DisableClockLowPower\n * AHB1LPENR SRAM3LPEN LL_AHB1_GRP1_DisableClockLowPower\n * AHB1LPENR BKPSRAMLPEN LL_AHB1_GRP1_DisableClockLowPower\n * AHB1LPENR DMA1LPEN LL_AHB1_GRP1_DisableClockLowPower\n * AHB1LPENR DMA2LPEN LL_AHB1_GRP1_DisableClockLowPower\n * AHB1LPENR DMA2DLPEN LL_AHB1_GRP1_DisableClockLowPower\n * AHB1LPENR RNGLPEN LL_AHB1_GRP1_DisableClockLowPower\n * AHB1LPENR ETHMACLPEN LL_AHB1_GRP1_DisableClockLowPower\n * AHB1LPENR ETHMACTXLPEN LL_AHB1_GRP1_DisableClockLowPower\n * AHB1LPENR ETHMACRXLPEN LL_AHB1_GRP1_DisableClockLowPower\n * AHB1LPENR ETHMACPTPLPEN LL_AHB1_GRP1_DisableClockLowPower\n * AHB1LPENR OTGHSLPEN LL_AHB1_GRP1_DisableClockLowPower\n * AHB1LPENR OTGHSULPILPEN LL_AHB1_GRP1_DisableClockLowPower * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) * @arg @ref LL_AHB1_GRP1_PERIPH_CRC * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM (*) * @arg @ref LL_AHB1_GRP1_PERIPH_FLITF * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM1 * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM2 (*) * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM3 (*) * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*) * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*) * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*) * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI (*) * * (*) value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_AHB1_GRP1_DisableClockLowPower(uint32_t Periphs) { CLEAR_BIT(RCC->AHB1LPENR, Periphs); } /** * @} */ #if defined(RCC_AHB2_SUPPORT) /** @defgroup BUS_LL_EF_AHB2 AHB2 * @{ */ /** * @brief Enable AHB2 peripherals clock. * @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_EnableClock\n * AHB2ENR CRYPEN LL_AHB2_GRP1_EnableClock\n * AHB2ENR AESEN LL_AHB2_GRP1_EnableClock\n * AHB2ENR HASHEN LL_AHB2_GRP1_EnableClock\n * AHB2ENR RNGEN LL_AHB2_GRP1_EnableClock\n * AHB2ENR OTGFSEN LL_AHB2_GRP1_EnableClock * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) * * (*) value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_AHB2_GRP1_EnableClock(uint32_t Periphs) { __IO uint32_t tmpreg; SET_BIT(RCC->AHB2ENR, Periphs); /* Delay after an RCC peripheral clock enabling */ tmpreg = READ_BIT(RCC->AHB2ENR, Periphs); (void)tmpreg; } /** * @brief Check if AHB2 peripheral clock is enabled or not * @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_IsEnabledClock\n * AHB2ENR CRYPEN LL_AHB2_GRP1_IsEnabledClock\n * AHB2ENR AESEN LL_AHB2_GRP1_IsEnabledClock\n * AHB2ENR HASHEN LL_AHB2_GRP1_IsEnabledClock\n * AHB2ENR RNGEN LL_AHB2_GRP1_IsEnabledClock\n * AHB2ENR OTGFSEN LL_AHB2_GRP1_IsEnabledClock * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) * * (*) value not defined in all devices. * @retval State of Periphs (1 or 0). */ __STATIC_INLINE uint32_t LL_AHB2_GRP1_IsEnabledClock(uint32_t Periphs) { return (READ_BIT(RCC->AHB2ENR, Periphs) == Periphs); } /** * @brief Disable AHB2 peripherals clock. * @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_DisableClock\n * AHB2ENR CRYPEN LL_AHB2_GRP1_DisableClock\n * AHB2ENR AESEN LL_AHB2_GRP1_DisableClock\n * AHB2ENR HASHEN LL_AHB2_GRP1_DisableClock\n * AHB2ENR RNGEN LL_AHB2_GRP1_DisableClock\n * AHB2ENR OTGFSEN LL_AHB2_GRP1_DisableClock * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) * * (*) value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_AHB2_GRP1_DisableClock(uint32_t Periphs) { CLEAR_BIT(RCC->AHB2ENR, Periphs); } /** * @brief Force AHB2 peripherals reset. * @rmtoll AHB2RSTR DCMIRST LL_AHB2_GRP1_ForceReset\n * AHB2RSTR CRYPRST LL_AHB2_GRP1_ForceReset\n * AHB2RSTR AESRST LL_AHB2_GRP1_ForceReset\n * AHB2RSTR HASHRST LL_AHB2_GRP1_ForceReset\n * AHB2RSTR RNGRST LL_AHB2_GRP1_ForceReset\n * AHB2RSTR OTGFSRST LL_AHB2_GRP1_ForceReset * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_AHB2_GRP1_PERIPH_ALL * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) * * (*) value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_AHB2_GRP1_ForceReset(uint32_t Periphs) { SET_BIT(RCC->AHB2RSTR, Periphs); } /** * @brief Release AHB2 peripherals reset. * @rmtoll AHB2RSTR DCMIRST LL_AHB2_GRP1_ReleaseReset\n * AHB2RSTR CRYPRST LL_AHB2_GRP1_ReleaseReset\n * AHB2RSTR AESRST LL_AHB2_GRP1_ReleaseReset\n * AHB2RSTR HASHRST LL_AHB2_GRP1_ReleaseReset\n * AHB2RSTR RNGRST LL_AHB2_GRP1_ReleaseReset\n * AHB2RSTR OTGFSRST LL_AHB2_GRP1_ReleaseReset * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_AHB2_GRP1_PERIPH_ALL * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) * * (*) value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_AHB2_GRP1_ReleaseReset(uint32_t Periphs) { CLEAR_BIT(RCC->AHB2RSTR, Periphs); } /** * @brief Enable AHB2 peripheral clocks in low-power mode * @rmtoll AHB2LPENR DCMILPEN LL_AHB2_GRP1_EnableClockLowPower\n * AHB2LPENR CRYPLPEN LL_AHB2_GRP1_EnableClockLowPower\n * AHB2LPENR AESLPEN LL_AHB2_GRP1_EnableClockLowPower\n * AHB2LPENR HASHLPEN LL_AHB2_GRP1_EnableClockLowPower\n * AHB2LPENR RNGLPEN LL_AHB2_GRP1_EnableClockLowPower\n * AHB2LPENR OTGFSLPEN LL_AHB2_GRP1_EnableClockLowPower * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) * * (*) value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_AHB2_GRP1_EnableClockLowPower(uint32_t Periphs) { __IO uint32_t tmpreg; SET_BIT(RCC->AHB2LPENR, Periphs); /* Delay after an RCC peripheral clock enabling */ tmpreg = READ_BIT(RCC->AHB2LPENR, Periphs); (void)tmpreg; } /** * @brief Disable AHB2 peripheral clocks in low-power mode * @rmtoll AHB2LPENR DCMILPEN LL_AHB2_GRP1_DisableClockLowPower\n * AHB2LPENR CRYPLPEN LL_AHB2_GRP1_DisableClockLowPower\n * AHB2LPENR AESLPEN LL_AHB2_GRP1_DisableClockLowPower\n * AHB2LPENR HASHLPEN LL_AHB2_GRP1_DisableClockLowPower\n * AHB2LPENR RNGLPEN LL_AHB2_GRP1_DisableClockLowPower\n * AHB2LPENR OTGFSLPEN LL_AHB2_GRP1_DisableClockLowPower * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) * * (*) value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_AHB2_GRP1_DisableClockLowPower(uint32_t Periphs) { CLEAR_BIT(RCC->AHB2LPENR, Periphs); } /** * @} */ #endif /* RCC_AHB2_SUPPORT */ #if defined(RCC_AHB3_SUPPORT) /** @defgroup BUS_LL_EF_AHB3 AHB3 * @{ */ /** * @brief Enable AHB3 peripherals clock. * @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_EnableClock\n * AHB3ENR FSMCEN LL_AHB3_GRP1_EnableClock\n * AHB3ENR QSPIEN LL_AHB3_GRP1_EnableClock * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) * * (*) value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_AHB3_GRP1_EnableClock(uint32_t Periphs) { __IO uint32_t tmpreg; SET_BIT(RCC->AHB3ENR, Periphs); /* Delay after an RCC peripheral clock enabling */ tmpreg = READ_BIT(RCC->AHB3ENR, Periphs); (void)tmpreg; } /** * @brief Check if AHB3 peripheral clock is enabled or not * @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_IsEnabledClock\n * AHB3ENR FSMCEN LL_AHB3_GRP1_IsEnabledClock\n * AHB3ENR QSPIEN LL_AHB3_GRP1_IsEnabledClock * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) * * (*) value not defined in all devices. * @retval State of Periphs (1 or 0). */ __STATIC_INLINE uint32_t LL_AHB3_GRP1_IsEnabledClock(uint32_t Periphs) { return (READ_BIT(RCC->AHB3ENR, Periphs) == Periphs); } /** * @brief Disable AHB3 peripherals clock. * @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_DisableClock\n * AHB3ENR FSMCEN LL_AHB3_GRP1_DisableClock\n * AHB3ENR QSPIEN LL_AHB3_GRP1_DisableClock * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) * * (*) value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_AHB3_GRP1_DisableClock(uint32_t Periphs) { CLEAR_BIT(RCC->AHB3ENR, Periphs); } /** * @brief Force AHB3 peripherals reset. * @rmtoll AHB3RSTR FMCRST LL_AHB3_GRP1_ForceReset\n * AHB3RSTR FSMCRST LL_AHB3_GRP1_ForceReset\n * AHB3RSTR QSPIRST LL_AHB3_GRP1_ForceReset * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_AHB3_GRP1_PERIPH_ALL * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) * * (*) value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_AHB3_GRP1_ForceReset(uint32_t Periphs) { SET_BIT(RCC->AHB3RSTR, Periphs); } /** * @brief Release AHB3 peripherals reset. * @rmtoll AHB3RSTR FMCRST LL_AHB3_GRP1_ReleaseReset\n * AHB3RSTR FSMCRST LL_AHB3_GRP1_ReleaseReset\n * AHB3RSTR QSPIRST LL_AHB3_GRP1_ReleaseReset * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_AHB2_GRP1_PERIPH_ALL * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) * * (*) value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_AHB3_GRP1_ReleaseReset(uint32_t Periphs) { CLEAR_BIT(RCC->AHB3RSTR, Periphs); } /** * @brief Enable AHB3 peripheral clocks in low-power mode * @rmtoll AHB3LPENR FMCLPEN LL_AHB3_GRP1_EnableClockLowPower\n * AHB3LPENR FSMCLPEN LL_AHB3_GRP1_EnableClockLowPower\n * AHB3LPENR QSPILPEN LL_AHB3_GRP1_EnableClockLowPower * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) * * (*) value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_AHB3_GRP1_EnableClockLowPower(uint32_t Periphs) { __IO uint32_t tmpreg; SET_BIT(RCC->AHB3LPENR, Periphs); /* Delay after an RCC peripheral clock enabling */ tmpreg = READ_BIT(RCC->AHB3LPENR, Periphs); (void)tmpreg; } /** * @brief Disable AHB3 peripheral clocks in low-power mode * @rmtoll AHB3LPENR FMCLPEN LL_AHB3_GRP1_DisableClockLowPower\n * AHB3LPENR FSMCLPEN LL_AHB3_GRP1_DisableClockLowPower\n * AHB3LPENR QSPILPEN LL_AHB3_GRP1_DisableClockLowPower * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) * * (*) value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_AHB3_GRP1_DisableClockLowPower(uint32_t Periphs) { CLEAR_BIT(RCC->AHB3LPENR, Periphs); } /** * @} */ #endif /* RCC_AHB3_SUPPORT */ /** @defgroup BUS_LL_EF_APB1 APB1 * @{ */ /** * @brief Enable APB1 peripherals clock. * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_EnableClock\n * APB1ENR TIM3EN LL_APB1_GRP1_EnableClock\n * APB1ENR TIM4EN LL_APB1_GRP1_EnableClock\n * APB1ENR TIM5EN LL_APB1_GRP1_EnableClock\n * APB1ENR TIM6EN LL_APB1_GRP1_EnableClock\n * APB1ENR TIM7EN LL_APB1_GRP1_EnableClock\n * APB1ENR TIM12EN LL_APB1_GRP1_EnableClock\n * APB1ENR TIM13EN LL_APB1_GRP1_EnableClock\n * APB1ENR TIM14EN LL_APB1_GRP1_EnableClock\n * APB1ENR LPTIM1EN LL_APB1_GRP1_EnableClock\n * APB1ENR WWDGEN LL_APB1_GRP1_EnableClock\n * APB1ENR SPI2EN LL_APB1_GRP1_EnableClock\n * APB1ENR SPI3EN LL_APB1_GRP1_EnableClock\n * APB1ENR SPDIFRXEN LL_APB1_GRP1_EnableClock\n * APB1ENR USART2EN LL_APB1_GRP1_EnableClock\n * APB1ENR USART3EN LL_APB1_GRP1_EnableClock\n * APB1ENR UART4EN LL_APB1_GRP1_EnableClock\n * APB1ENR UART5EN LL_APB1_GRP1_EnableClock\n * APB1ENR I2C1EN LL_APB1_GRP1_EnableClock\n * APB1ENR I2C2EN LL_APB1_GRP1_EnableClock\n * APB1ENR I2C3EN LL_APB1_GRP1_EnableClock\n * APB1ENR FMPI2C1EN LL_APB1_GRP1_EnableClock\n * APB1ENR CAN1EN LL_APB1_GRP1_EnableClock\n * APB1ENR CAN2EN LL_APB1_GRP1_EnableClock\n * APB1ENR CAN3EN LL_APB1_GRP1_EnableClock\n * APB1ENR CECEN LL_APB1_GRP1_EnableClock\n * APB1ENR PWREN LL_APB1_GRP1_EnableClock\n * APB1ENR DACEN LL_APB1_GRP1_EnableClock\n * APB1ENR UART7EN LL_APB1_GRP1_EnableClock\n * APB1ENR UART8EN LL_APB1_GRP1_EnableClock\n * APB1ENR RTCAPBEN LL_APB1_GRP1_EnableClock * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) * @arg @ref LL_APB1_GRP1_PERIPH_WWDG * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) * @arg @ref LL_APB1_GRP1_PERIPH_USART2 * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) * @arg @ref LL_APB1_GRP1_PERIPH_PWR * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*) * * (*) value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs) { __IO uint32_t tmpreg; SET_BIT(RCC->APB1ENR, Periphs); /* Delay after an RCC peripheral clock enabling */ tmpreg = READ_BIT(RCC->APB1ENR, Periphs); (void)tmpreg; } /** * @brief Check if APB1 peripheral clock is enabled or not * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_IsEnabledClock\n * APB1ENR TIM3EN LL_APB1_GRP1_IsEnabledClock\n * APB1ENR TIM4EN LL_APB1_GRP1_IsEnabledClock\n * APB1ENR TIM5EN LL_APB1_GRP1_IsEnabledClock\n * APB1ENR TIM6EN LL_APB1_GRP1_IsEnabledClock\n * APB1ENR TIM7EN LL_APB1_GRP1_IsEnabledClock\n * APB1ENR TIM12EN LL_APB1_GRP1_IsEnabledClock\n * APB1ENR TIM13EN LL_APB1_GRP1_IsEnabledClock\n * APB1ENR TIM14EN LL_APB1_GRP1_IsEnabledClock\n * APB1ENR LPTIM1EN LL_APB1_GRP1_IsEnabledClock\n * APB1ENR WWDGEN LL_APB1_GRP1_IsEnabledClock\n * APB1ENR SPI2EN LL_APB1_GRP1_IsEnabledClock\n * APB1ENR SPI3EN LL_APB1_GRP1_IsEnabledClock\n * APB1ENR SPDIFRXEN LL_APB1_GRP1_IsEnabledClock\n * APB1ENR USART2EN LL_APB1_GRP1_IsEnabledClock\n * APB1ENR USART3EN LL_APB1_GRP1_IsEnabledClock\n * APB1ENR UART4EN LL_APB1_GRP1_IsEnabledClock\n * APB1ENR UART5EN LL_APB1_GRP1_IsEnabledClock\n * APB1ENR I2C1EN LL_APB1_GRP1_IsEnabledClock\n * APB1ENR I2C2EN LL_APB1_GRP1_IsEnabledClock\n * APB1ENR I2C3EN LL_APB1_GRP1_IsEnabledClock\n * APB1ENR FMPI2C1EN LL_APB1_GRP1_IsEnabledClock\n * APB1ENR CAN1EN LL_APB1_GRP1_IsEnabledClock\n * APB1ENR CAN2EN LL_APB1_GRP1_IsEnabledClock\n * APB1ENR CAN3EN LL_APB1_GRP1_IsEnabledClock\n * APB1ENR CECEN LL_APB1_GRP1_IsEnabledClock\n * APB1ENR PWREN LL_APB1_GRP1_IsEnabledClock\n * APB1ENR DACEN LL_APB1_GRP1_IsEnabledClock\n * APB1ENR UART7EN LL_APB1_GRP1_IsEnabledClock\n * APB1ENR UART8EN LL_APB1_GRP1_IsEnabledClock\n * APB1ENR RTCAPBEN LL_APB1_GRP1_IsEnabledClock * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) * @arg @ref LL_APB1_GRP1_PERIPH_WWDG * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) * @arg @ref LL_APB1_GRP1_PERIPH_USART2 * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) * @arg @ref LL_APB1_GRP1_PERIPH_PWR * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*) * * (*) value not defined in all devices. * @retval State of Periphs (1 or 0). */ __STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs) { return (READ_BIT(RCC->APB1ENR, Periphs) == Periphs); } /** * @brief Disable APB1 peripherals clock. * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_DisableClock\n * APB1ENR TIM3EN LL_APB1_GRP1_DisableClock\n * APB1ENR TIM4EN LL_APB1_GRP1_DisableClock\n * APB1ENR TIM5EN LL_APB1_GRP1_DisableClock\n * APB1ENR TIM6EN LL_APB1_GRP1_DisableClock\n * APB1ENR TIM7EN LL_APB1_GRP1_DisableClock\n * APB1ENR TIM12EN LL_APB1_GRP1_DisableClock\n * APB1ENR TIM13EN LL_APB1_GRP1_DisableClock\n * APB1ENR TIM14EN LL_APB1_GRP1_DisableClock\n * APB1ENR LPTIM1EN LL_APB1_GRP1_DisableClock\n * APB1ENR WWDGEN LL_APB1_GRP1_DisableClock\n * APB1ENR SPI2EN LL_APB1_GRP1_DisableClock\n * APB1ENR SPI3EN LL_APB1_GRP1_DisableClock\n * APB1ENR SPDIFRXEN LL_APB1_GRP1_DisableClock\n * APB1ENR USART2EN LL_APB1_GRP1_DisableClock\n * APB1ENR USART3EN LL_APB1_GRP1_DisableClock\n * APB1ENR UART4EN LL_APB1_GRP1_DisableClock\n * APB1ENR UART5EN LL_APB1_GRP1_DisableClock\n * APB1ENR I2C1EN LL_APB1_GRP1_DisableClock\n * APB1ENR I2C2EN LL_APB1_GRP1_DisableClock\n * APB1ENR I2C3EN LL_APB1_GRP1_DisableClock\n * APB1ENR FMPI2C1EN LL_APB1_GRP1_DisableClock\n * APB1ENR CAN1EN LL_APB1_GRP1_DisableClock\n * APB1ENR CAN2EN LL_APB1_GRP1_DisableClock\n * APB1ENR CAN3EN LL_APB1_GRP1_DisableClock\n * APB1ENR CECEN LL_APB1_GRP1_DisableClock\n * APB1ENR PWREN LL_APB1_GRP1_DisableClock\n * APB1ENR DACEN LL_APB1_GRP1_DisableClock\n * APB1ENR UART7EN LL_APB1_GRP1_DisableClock\n * APB1ENR UART8EN LL_APB1_GRP1_DisableClock\n * APB1ENR RTCAPBEN LL_APB1_GRP1_DisableClock * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) * @arg @ref LL_APB1_GRP1_PERIPH_WWDG * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) * @arg @ref LL_APB1_GRP1_PERIPH_USART2 * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) * @arg @ref LL_APB1_GRP1_PERIPH_PWR * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*) * * (*) value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs) { CLEAR_BIT(RCC->APB1ENR, Periphs); } /** * @brief Force APB1 peripherals reset. * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ForceReset\n * APB1RSTR TIM3RST LL_APB1_GRP1_ForceReset\n * APB1RSTR TIM4RST LL_APB1_GRP1_ForceReset\n * APB1RSTR TIM5RST LL_APB1_GRP1_ForceReset\n * APB1RSTR TIM6RST LL_APB1_GRP1_ForceReset\n * APB1RSTR TIM7RST LL_APB1_GRP1_ForceReset\n * APB1RSTR TIM12RST LL_APB1_GRP1_ForceReset\n * APB1RSTR TIM13RST LL_APB1_GRP1_ForceReset\n * APB1RSTR TIM14RST LL_APB1_GRP1_ForceReset\n * APB1RSTR LPTIM1RST LL_APB1_GRP1_ForceReset\n * APB1RSTR WWDGRST LL_APB1_GRP1_ForceReset\n * APB1RSTR SPI2RST LL_APB1_GRP1_ForceReset\n * APB1RSTR SPI3RST LL_APB1_GRP1_ForceReset\n * APB1RSTR SPDIFRXRST LL_APB1_GRP1_ForceReset\n * APB1RSTR USART2RST LL_APB1_GRP1_ForceReset\n * APB1RSTR USART3RST LL_APB1_GRP1_ForceReset\n * APB1RSTR UART4RST LL_APB1_GRP1_ForceReset\n * APB1RSTR UART5RST LL_APB1_GRP1_ForceReset\n * APB1RSTR I2C1RST LL_APB1_GRP1_ForceReset\n * APB1RSTR I2C2RST LL_APB1_GRP1_ForceReset\n * APB1RSTR I2C3RST LL_APB1_GRP1_ForceReset\n * APB1RSTR FMPI2C1RST LL_APB1_GRP1_ForceReset\n * APB1RSTR CAN1RST LL_APB1_GRP1_ForceReset\n * APB1RSTR CAN2RST LL_APB1_GRP1_ForceReset\n * APB1RSTR CAN3RST LL_APB1_GRP1_ForceReset\n * APB1RSTR CECRST LL_APB1_GRP1_ForceReset\n * APB1RSTR PWRRST LL_APB1_GRP1_ForceReset\n * APB1RSTR DACRST LL_APB1_GRP1_ForceReset\n * APB1RSTR UART7RST LL_APB1_GRP1_ForceReset\n * APB1RSTR UART8RST LL_APB1_GRP1_ForceReset * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) * @arg @ref LL_APB1_GRP1_PERIPH_WWDG * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) * @arg @ref LL_APB1_GRP1_PERIPH_USART2 * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) * @arg @ref LL_APB1_GRP1_PERIPH_PWR * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) * * (*) value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs) { SET_BIT(RCC->APB1RSTR, Periphs); } /** * @brief Release APB1 peripherals reset. * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR TIM3RST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR TIM4RST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR TIM5RST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR TIM6RST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR TIM7RST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR TIM12RST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR TIM13RST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR TIM14RST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR LPTIM1RST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR WWDGRST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR SPI2RST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR SPI3RST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR SPDIFRXRST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR USART2RST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR USART3RST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR UART4RST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR UART5RST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR I2C1RST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR I2C2RST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR I2C3RST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR FMPI2C1RST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR CAN1RST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR CAN2RST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR CAN3RST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR CECRST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR PWRRST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR DACRST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR UART7RST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR UART8RST LL_APB1_GRP1_ReleaseReset * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) * @arg @ref LL_APB1_GRP1_PERIPH_WWDG * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) * @arg @ref LL_APB1_GRP1_PERIPH_USART2 * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) * @arg @ref LL_APB1_GRP1_PERIPH_PWR * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) * * (*) value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs) { CLEAR_BIT(RCC->APB1RSTR, Periphs); } /** * @brief Enable APB1 peripheral clocks in low-power mode * @rmtoll APB1LPENR TIM2LPEN LL_APB1_GRP1_EnableClockLowPower\n * APB1LPENR TIM3LPEN LL_APB1_GRP1_EnableClockLowPower\n * APB1LPENR TIM4LPEN LL_APB1_GRP1_EnableClockLowPower\n * APB1LPENR TIM5LPEN LL_APB1_GRP1_EnableClockLowPower\n * APB1LPENR TIM6LPEN LL_APB1_GRP1_EnableClockLowPower\n * APB1LPENR TIM7LPEN LL_APB1_GRP1_EnableClockLowPower\n * APB1LPENR TIM12LPEN LL_APB1_GRP1_EnableClockLowPower\n * APB1LPENR TIM13LPEN LL_APB1_GRP1_EnableClockLowPower\n * APB1LPENR TIM14LPEN LL_APB1_GRP1_EnableClockLowPower\n * APB1LPENR LPTIM1LPEN LL_APB1_GRP1_EnableClockLowPower\n * APB1LPENR WWDGLPEN LL_APB1_GRP1_EnableClockLowPower\n * APB1LPENR SPI2LPEN LL_APB1_GRP1_EnableClockLowPower\n * APB1LPENR SPI3LPEN LL_APB1_GRP1_EnableClockLowPower\n * APB1LPENR SPDIFRXLPEN LL_APB1_GRP1_EnableClockLowPower\n * APB1LPENR USART2LPEN LL_APB1_GRP1_EnableClockLowPower\n * APB1LPENR USART3LPEN LL_APB1_GRP1_EnableClockLowPower\n * APB1LPENR UART4LPEN LL_APB1_GRP1_EnableClockLowPower\n * APB1LPENR UART5LPEN LL_APB1_GRP1_EnableClockLowPower\n * APB1LPENR I2C1LPEN LL_APB1_GRP1_EnableClockLowPower\n * APB1LPENR I2C2LPEN LL_APB1_GRP1_EnableClockLowPower\n * APB1LPENR I2C3LPEN LL_APB1_GRP1_EnableClockLowPower\n * APB1LPENR FMPI2C1LPEN LL_APB1_GRP1_EnableClockLowPower\n * APB1LPENR CAN1LPEN LL_APB1_GRP1_EnableClockLowPower\n * APB1LPENR CAN2LPEN LL_APB1_GRP1_EnableClockLowPower\n * APB1LPENR CAN3LPEN LL_APB1_GRP1_EnableClockLowPower\n * APB1LPENR CECLPEN LL_APB1_GRP1_EnableClockLowPower\n * APB1LPENR PWRLPEN LL_APB1_GRP1_EnableClockLowPower\n * APB1LPENR DACLPEN LL_APB1_GRP1_EnableClockLowPower\n * APB1LPENR UART7LPEN LL_APB1_GRP1_EnableClockLowPower\n * APB1LPENR UART8LPEN LL_APB1_GRP1_EnableClockLowPower\n * APB1LPENR RTCAPBLPEN LL_APB1_GRP1_EnableClockLowPower * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) * @arg @ref LL_APB1_GRP1_PERIPH_WWDG * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) * @arg @ref LL_APB1_GRP1_PERIPH_USART2 * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) * @arg @ref LL_APB1_GRP1_PERIPH_PWR * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*) * * (*) value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_APB1_GRP1_EnableClockLowPower(uint32_t Periphs) { __IO uint32_t tmpreg; SET_BIT(RCC->APB1LPENR, Periphs); /* Delay after an RCC peripheral clock enabling */ tmpreg = READ_BIT(RCC->APB1LPENR, Periphs); (void)tmpreg; } /** * @brief Disable APB1 peripheral clocks in low-power mode * @rmtoll APB1LPENR TIM2LPEN LL_APB1_GRP1_DisableClockLowPower\n * APB1LPENR TIM3LPEN LL_APB1_GRP1_DisableClockLowPower\n * APB1LPENR TIM4LPEN LL_APB1_GRP1_DisableClockLowPower\n * APB1LPENR TIM5LPEN LL_APB1_GRP1_DisableClockLowPower\n * APB1LPENR TIM6LPEN LL_APB1_GRP1_DisableClockLowPower\n * APB1LPENR TIM7LPEN LL_APB1_GRP1_DisableClockLowPower\n * APB1LPENR TIM12LPEN LL_APB1_GRP1_DisableClockLowPower\n * APB1LPENR TIM13LPEN LL_APB1_GRP1_DisableClockLowPower\n * APB1LPENR TIM14LPEN LL_APB1_GRP1_DisableClockLowPower\n * APB1LPENR LPTIM1LPEN LL_APB1_GRP1_DisableClockLowPower\n * APB1LPENR WWDGLPEN LL_APB1_GRP1_DisableClockLowPower\n * APB1LPENR SPI2LPEN LL_APB1_GRP1_DisableClockLowPower\n * APB1LPENR SPI3LPEN LL_APB1_GRP1_DisableClockLowPower\n * APB1LPENR SPDIFRXLPEN LL_APB1_GRP1_DisableClockLowPower\n * APB1LPENR USART2LPEN LL_APB1_GRP1_DisableClockLowPower\n * APB1LPENR USART3LPEN LL_APB1_GRP1_DisableClockLowPower\n * APB1LPENR UART4LPEN LL_APB1_GRP1_DisableClockLowPower\n * APB1LPENR UART5LPEN LL_APB1_GRP1_DisableClockLowPower\n * APB1LPENR I2C1LPEN LL_APB1_GRP1_DisableClockLowPower\n * APB1LPENR I2C2LPEN LL_APB1_GRP1_DisableClockLowPower\n * APB1LPENR I2C3LPEN LL_APB1_GRP1_DisableClockLowPower\n * APB1LPENR FMPI2C1LPEN LL_APB1_GRP1_DisableClockLowPower\n * APB1LPENR CAN1LPEN LL_APB1_GRP1_DisableClockLowPower\n * APB1LPENR CAN2LPEN LL_APB1_GRP1_DisableClockLowPower\n * APB1LPENR CAN3LPEN LL_APB1_GRP1_DisableClockLowPower\n * APB1LPENR CECLPEN LL_APB1_GRP1_DisableClockLowPower\n * APB1LPENR PWRLPEN LL_APB1_GRP1_DisableClockLowPower\n * APB1LPENR DACLPEN LL_APB1_GRP1_DisableClockLowPower\n * APB1LPENR UART7LPEN LL_APB1_GRP1_DisableClockLowPower\n * APB1LPENR UART8LPEN LL_APB1_GRP1_DisableClockLowPower\n * APB1LPENR RTCAPBLPEN LL_APB1_GRP1_DisableClockLowPower * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) * @arg @ref LL_APB1_GRP1_PERIPH_WWDG * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) * @arg @ref LL_APB1_GRP1_PERIPH_USART2 * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) * @arg @ref LL_APB1_GRP1_PERIPH_PWR * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*) * * (*) value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_APB1_GRP1_DisableClockLowPower(uint32_t Periphs) { CLEAR_BIT(RCC->APB1LPENR, Periphs); } /** * @} */ /** @defgroup BUS_LL_EF_APB2 APB2 * @{ */ /** * @brief Enable APB2 peripherals clock. * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_EnableClock\n * APB2ENR TIM8EN LL_APB2_GRP1_EnableClock\n * APB2ENR USART1EN LL_APB2_GRP1_EnableClock\n * APB2ENR USART6EN LL_APB2_GRP1_EnableClock\n * APB2ENR UART9EN LL_APB2_GRP1_EnableClock\n * APB2ENR UART10EN LL_APB2_GRP1_EnableClock\n * APB2ENR ADC1EN LL_APB2_GRP1_EnableClock\n * APB2ENR ADC2EN LL_APB2_GRP1_EnableClock\n * APB2ENR ADC3EN LL_APB2_GRP1_EnableClock\n * APB2ENR SDIOEN LL_APB2_GRP1_EnableClock\n * APB2ENR SPI1EN LL_APB2_GRP1_EnableClock\n * APB2ENR SPI4EN LL_APB2_GRP1_EnableClock\n * APB2ENR SYSCFGEN LL_APB2_GRP1_EnableClock\n * APB2ENR EXTITEN LL_APB2_GRP1_EnableClock\n * APB2ENR TIM9EN LL_APB2_GRP1_EnableClock\n * APB2ENR TIM10EN LL_APB2_GRP1_EnableClock\n * APB2ENR TIM11EN LL_APB2_GRP1_EnableClock\n * APB2ENR SPI5EN LL_APB2_GRP1_EnableClock\n * APB2ENR SPI6EN LL_APB2_GRP1_EnableClock\n * APB2ENR SAI1EN LL_APB2_GRP1_EnableClock\n * APB2ENR SAI2EN LL_APB2_GRP1_EnableClock\n * APB2ENR LTDCEN LL_APB2_GRP1_EnableClock\n * APB2ENR DSIEN LL_APB2_GRP1_EnableClock\n * APB2ENR DFSDM1EN LL_APB2_GRP1_EnableClock\n * APB2ENR DFSDM2EN LL_APB2_GRP1_EnableClock * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) * @arg @ref LL_APB2_GRP1_PERIPH_USART1 * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 * @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*) * @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG * @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*) * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) * * (*) value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs) { __IO uint32_t tmpreg; SET_BIT(RCC->APB2ENR, Periphs); /* Delay after an RCC peripheral clock enabling */ tmpreg = READ_BIT(RCC->APB2ENR, Periphs); (void)tmpreg; } /** * @brief Check if APB2 peripheral clock is enabled or not * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_IsEnabledClock\n * APB2ENR TIM8EN LL_APB2_GRP1_IsEnabledClock\n * APB2ENR USART1EN LL_APB2_GRP1_IsEnabledClock\n * APB2ENR USART6EN LL_APB2_GRP1_IsEnabledClock\n * APB2ENR UART9EN LL_APB2_GRP1_IsEnabledClock\n * APB2ENR UART10EN LL_APB2_GRP1_IsEnabledClock\n * APB2ENR ADC1EN LL_APB2_GRP1_IsEnabledClock\n * APB2ENR ADC2EN LL_APB2_GRP1_IsEnabledClock\n * APB2ENR ADC3EN LL_APB2_GRP1_IsEnabledClock\n * APB2ENR SDIOEN LL_APB2_GRP1_IsEnabledClock\n * APB2ENR SPI1EN LL_APB2_GRP1_IsEnabledClock\n * APB2ENR SPI4EN LL_APB2_GRP1_IsEnabledClock\n * APB2ENR SYSCFGEN LL_APB2_GRP1_IsEnabledClock\n * APB2ENR EXTITEN LL_APB2_GRP1_IsEnabledClock\n * APB2ENR TIM9EN LL_APB2_GRP1_IsEnabledClock\n * APB2ENR TIM10EN LL_APB2_GRP1_IsEnabledClock\n * APB2ENR TIM11EN LL_APB2_GRP1_IsEnabledClock\n * APB2ENR SPI5EN LL_APB2_GRP1_IsEnabledClock\n * APB2ENR SPI6EN LL_APB2_GRP1_IsEnabledClock\n * APB2ENR SAI1EN LL_APB2_GRP1_IsEnabledClock\n * APB2ENR SAI2EN LL_APB2_GRP1_IsEnabledClock\n * APB2ENR LTDCEN LL_APB2_GRP1_IsEnabledClock\n * APB2ENR DSIEN LL_APB2_GRP1_IsEnabledClock\n * APB2ENR DFSDM1EN LL_APB2_GRP1_IsEnabledClock\n * APB2ENR DFSDM2EN LL_APB2_GRP1_IsEnabledClock * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) * @arg @ref LL_APB2_GRP1_PERIPH_USART1 * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 * @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*) * @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG * @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*) * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) * * (*) value not defined in all devices. * @retval State of Periphs (1 or 0). */ __STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs) { return (READ_BIT(RCC->APB2ENR, Periphs) == Periphs); } /** * @brief Disable APB2 peripherals clock. * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_DisableClock\n * APB2ENR TIM8EN LL_APB2_GRP1_DisableClock\n * APB2ENR USART1EN LL_APB2_GRP1_DisableClock\n * APB2ENR USART6EN LL_APB2_GRP1_DisableClock\n * APB2ENR UART9EN LL_APB2_GRP1_DisableClock\n * APB2ENR UART10EN LL_APB2_GRP1_DisableClock\n * APB2ENR ADC1EN LL_APB2_GRP1_DisableClock\n * APB2ENR ADC2EN LL_APB2_GRP1_DisableClock\n * APB2ENR ADC3EN LL_APB2_GRP1_DisableClock\n * APB2ENR SDIOEN LL_APB2_GRP1_DisableClock\n * APB2ENR SPI1EN LL_APB2_GRP1_DisableClock\n * APB2ENR SPI4EN LL_APB2_GRP1_DisableClock\n * APB2ENR SYSCFGEN LL_APB2_GRP1_DisableClock\n * APB2ENR EXTITEN LL_APB2_GRP1_DisableClock\n * APB2ENR TIM9EN LL_APB2_GRP1_DisableClock\n * APB2ENR TIM10EN LL_APB2_GRP1_DisableClock\n * APB2ENR TIM11EN LL_APB2_GRP1_DisableClock\n * APB2ENR SPI5EN LL_APB2_GRP1_DisableClock\n * APB2ENR SPI6EN LL_APB2_GRP1_DisableClock\n * APB2ENR SAI1EN LL_APB2_GRP1_DisableClock\n * APB2ENR SAI2EN LL_APB2_GRP1_DisableClock\n * APB2ENR LTDCEN LL_APB2_GRP1_DisableClock\n * APB2ENR DSIEN LL_APB2_GRP1_DisableClock\n * APB2ENR DFSDM1EN LL_APB2_GRP1_DisableClock\n * APB2ENR DFSDM2EN LL_APB2_GRP1_DisableClock * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) * @arg @ref LL_APB2_GRP1_PERIPH_USART1 * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 * @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*) * @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG * @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*) * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) * * (*) value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs) { CLEAR_BIT(RCC->APB2ENR, Periphs); } /** * @brief Force APB2 peripherals reset. * @rmtoll APB2RSTR TIM1RST LL_APB2_GRP1_ForceReset\n * APB2RSTR TIM8RST LL_APB2_GRP1_ForceReset\n * APB2RSTR USART1RST LL_APB2_GRP1_ForceReset\n * APB2RSTR USART6RST LL_APB2_GRP1_ForceReset\n * APB2RSTR UART9RST LL_APB2_GRP1_ForceReset\n * APB2RSTR UART10RST LL_APB2_GRP1_ForceReset\n * APB2RSTR ADCRST LL_APB2_GRP1_ForceReset\n * APB2RSTR SDIORST LL_APB2_GRP1_ForceReset\n * APB2RSTR SPI1RST LL_APB2_GRP1_ForceReset\n * APB2RSTR SPI4RST LL_APB2_GRP1_ForceReset\n * APB2RSTR SYSCFGRST LL_APB2_GRP1_ForceReset\n * APB2RSTR TIM9RST LL_APB2_GRP1_ForceReset\n * APB2RSTR TIM10RST LL_APB2_GRP1_ForceReset\n * APB2RSTR TIM11RST LL_APB2_GRP1_ForceReset\n * APB2RSTR SPI5RST LL_APB2_GRP1_ForceReset\n * APB2RSTR SPI6RST LL_APB2_GRP1_ForceReset\n * APB2RSTR SAI1RST LL_APB2_GRP1_ForceReset\n * APB2RSTR SAI2RST LL_APB2_GRP1_ForceReset\n * APB2RSTR LTDCRST LL_APB2_GRP1_ForceReset\n * APB2RSTR DSIRST LL_APB2_GRP1_ForceReset\n * APB2RSTR DFSDM1RST LL_APB2_GRP1_ForceReset\n * APB2RSTR DFSDM2RST LL_APB2_GRP1_ForceReset * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_APB2_GRP1_PERIPH_ALL * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) * @arg @ref LL_APB2_GRP1_PERIPH_USART1 * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) * @arg @ref LL_APB2_GRP1_PERIPH_ADC * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) * * (*) value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs) { SET_BIT(RCC->APB2RSTR, Periphs); } /** * @brief Release APB2 peripherals reset. * @rmtoll APB2RSTR TIM1RST LL_APB2_GRP1_ReleaseReset\n * APB2RSTR TIM8RST LL_APB2_GRP1_ReleaseReset\n * APB2RSTR USART1RST LL_APB2_GRP1_ReleaseReset\n * APB2RSTR USART6RST LL_APB2_GRP1_ReleaseReset\n * APB2RSTR UART9RST LL_APB2_GRP1_ReleaseReset\n * APB2RSTR UART10RST LL_APB2_GRP1_ReleaseReset\n * APB2RSTR ADCRST LL_APB2_GRP1_ReleaseReset\n * APB2RSTR SDIORST LL_APB2_GRP1_ReleaseReset\n * APB2RSTR SPI1RST LL_APB2_GRP1_ReleaseReset\n * APB2RSTR SPI4RST LL_APB2_GRP1_ReleaseReset\n * APB2RSTR SYSCFGRST LL_APB2_GRP1_ReleaseReset\n * APB2RSTR TIM9RST LL_APB2_GRP1_ReleaseReset\n * APB2RSTR TIM10RST LL_APB2_GRP1_ReleaseReset\n * APB2RSTR TIM11RST LL_APB2_GRP1_ReleaseReset\n * APB2RSTR SPI5RST LL_APB2_GRP1_ReleaseReset\n * APB2RSTR SPI6RST LL_APB2_GRP1_ReleaseReset\n * APB2RSTR SAI1RST LL_APB2_GRP1_ReleaseReset\n * APB2RSTR SAI2RST LL_APB2_GRP1_ReleaseReset\n * APB2RSTR LTDCRST LL_APB2_GRP1_ReleaseReset\n * APB2RSTR DSIRST LL_APB2_GRP1_ReleaseReset\n * APB2RSTR DFSDM1RST LL_APB2_GRP1_ReleaseReset\n * APB2RSTR DFSDM2RST LL_APB2_GRP1_ReleaseReset * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_APB2_GRP1_PERIPH_ALL * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) * @arg @ref LL_APB2_GRP1_PERIPH_USART1 * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) * @arg @ref LL_APB2_GRP1_PERIPH_ADC * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG * @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*) * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) * * (*) value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs) { CLEAR_BIT(RCC->APB2RSTR, Periphs); } /** * @brief Enable APB2 peripheral clocks in low-power mode * @rmtoll APB2LPENR TIM1LPEN LL_APB2_GRP1_EnableClockLowPower\n * APB2LPENR TIM8LPEN LL_APB2_GRP1_EnableClockLowPower\n * APB2LPENR USART1LPEN LL_APB2_GRP1_EnableClockLowPower\n * APB2LPENR USART6LPEN LL_APB2_GRP1_EnableClockLowPower\n * APB2LPENR UART9LPEN LL_APB2_GRP1_EnableClockLowPower\n * APB2LPENR UART10LPEN LL_APB2_GRP1_EnableClockLowPower\n * APB2LPENR ADC1LPEN LL_APB2_GRP1_EnableClockLowPower\n * APB2LPENR ADC2LPEN LL_APB2_GRP1_EnableClockLowPower\n * APB2LPENR ADC3LPEN LL_APB2_GRP1_EnableClockLowPower\n * APB2LPENR SDIOLPEN LL_APB2_GRP1_EnableClockLowPower\n * APB2LPENR SPI1LPEN LL_APB2_GRP1_EnableClockLowPower\n * APB2LPENR SPI4LPEN LL_APB2_GRP1_EnableClockLowPower\n * APB2LPENR SYSCFGLPEN LL_APB2_GRP1_EnableClockLowPower\n * APB2LPENR EXTITLPEN LL_APB2_GRP1_EnableClockLowPower\n * APB2LPENR TIM9LPEN LL_APB2_GRP1_EnableClockLowPower\n * APB2LPENR TIM10LPEN LL_APB2_GRP1_EnableClockLowPower\n * APB2LPENR TIM11LPEN LL_APB2_GRP1_EnableClockLowPower\n * APB2LPENR SPI5LPEN LL_APB2_GRP1_EnableClockLowPower\n * APB2LPENR SPI6LPEN LL_APB2_GRP1_EnableClockLowPower\n * APB2LPENR SAI1LPEN LL_APB2_GRP1_EnableClockLowPower\n * APB2LPENR SAI2LPEN LL_APB2_GRP1_EnableClockLowPower\n * APB2LPENR LTDCLPEN LL_APB2_GRP1_EnableClockLowPower\n * APB2LPENR DSILPEN LL_APB2_GRP1_EnableClockLowPower\n * APB2LPENR DFSDM1LPEN LL_APB2_GRP1_EnableClockLowPower\n * APB2LPENR DSILPEN LL_APB2_GRP1_EnableClockLowPower\n * APB2LPENR DFSDM2LPEN LL_APB2_GRP1_EnableClockLowPower * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) * @arg @ref LL_APB2_GRP1_PERIPH_USART1 * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 * @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*) * @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG * @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*) * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) * * (*) value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_APB2_GRP1_EnableClockLowPower(uint32_t Periphs) { __IO uint32_t tmpreg; SET_BIT(RCC->APB2LPENR, Periphs); /* Delay after an RCC peripheral clock enabling */ tmpreg = READ_BIT(RCC->APB2LPENR, Periphs); (void)tmpreg; } /** * @brief Disable APB2 peripheral clocks in low-power mode * @rmtoll APB2LPENR TIM1LPEN LL_APB2_GRP1_DisableClockLowPower\n * APB2LPENR TIM8LPEN LL_APB2_GRP1_DisableClockLowPower\n * APB2LPENR USART1LPEN LL_APB2_GRP1_DisableClockLowPower\n * APB2LPENR USART6LPEN LL_APB2_GRP1_DisableClockLowPower\n * APB2LPENR UART9LPEN LL_APB2_GRP1_DisableClockLowPower\n * APB2LPENR UART10LPEN LL_APB2_GRP1_DisableClockLowPower\n * APB2LPENR ADC1LPEN LL_APB2_GRP1_DisableClockLowPower\n * APB2LPENR ADC2LPEN LL_APB2_GRP1_DisableClockLowPower\n * APB2LPENR ADC3LPEN LL_APB2_GRP1_DisableClockLowPower\n * APB2LPENR SDIOLPEN LL_APB2_GRP1_DisableClockLowPower\n * APB2LPENR SPI1LPEN LL_APB2_GRP1_DisableClockLowPower\n * APB2LPENR SPI4LPEN LL_APB2_GRP1_DisableClockLowPower\n * APB2LPENR SYSCFGLPEN LL_APB2_GRP1_DisableClockLowPower\n * APB2LPENR EXTITLPEN LL_APB2_GRP1_DisableClockLowPower\n * APB2LPENR TIM9LPEN LL_APB2_GRP1_DisableClockLowPower\n * APB2LPENR TIM10LPEN LL_APB2_GRP1_DisableClockLowPower\n * APB2LPENR TIM11LPEN LL_APB2_GRP1_DisableClockLowPower\n * APB2LPENR SPI5LPEN LL_APB2_GRP1_DisableClockLowPower\n * APB2LPENR SPI6LPEN LL_APB2_GRP1_DisableClockLowPower\n * APB2LPENR SAI1LPEN LL_APB2_GRP1_DisableClockLowPower\n * APB2LPENR SAI2LPEN LL_APB2_GRP1_DisableClockLowPower\n * APB2LPENR LTDCLPEN LL_APB2_GRP1_DisableClockLowPower\n * APB2LPENR DSILPEN LL_APB2_GRP1_DisableClockLowPower\n * APB2LPENR DFSDM1LPEN LL_APB2_GRP1_DisableClockLowPower\n * APB2LPENR DSILPEN LL_APB2_GRP1_DisableClockLowPower\n * APB2LPENR DFSDM2LPEN LL_APB2_GRP1_DisableClockLowPower * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) * @arg @ref LL_APB2_GRP1_PERIPH_USART1 * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 * @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*) * @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG * @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*) * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) * * (*) value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_APB2_GRP1_DisableClockLowPower(uint32_t Periphs) { CLEAR_BIT(RCC->APB2LPENR, Periphs); } /** * @} */ /** * @} */ /** * @} */ #endif /* defined(RCC) */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32F4xx_LL_BUS_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/