view Common/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_wwdg.h @ 882:608d3e918146 Evo_2_23

Added slow exit timer function: At the end of the dive the final ascent to surface should be done slowly. The new function provides a comparison of the current divers depth compared to a linear ascent simulated by the OSTC. The visualization is shown instead of the ascent speed with a little different appearance. The linear ascent is starting from the last stop depth and the time for the ascent may be configurated in the deco settings. The simulated and real peth is compared and the depth color changes based on the difference of the values. In case the diver is much below the timer depth then the timer will stop and wait for the diver to follow.
author Ideenmodellierer
date Sat, 31 Aug 2024 17:35:52 +0200
parents c78bcbd5deda
children
line wrap: on
line source

/**
  ******************************************************************************
  * @file    stm32f4xx_hal_wwdg.h
  * @author  MCD Application Team
  * @brief   Header file of WWDG HAL module.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */ 

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_WWDG_H
#define __STM32F4xx_HAL_WWDG_H

#ifdef __cplusplus
 extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"

/** @addtogroup STM32F4xx_HAL_Driver
  * @{
  */

/** @addtogroup WWDG
  * @{
  */ 

/* Exported types ------------------------------------------------------------*/
/** @defgroup WWDG_Exported_Types WWDG Exported Types
  * @{
  */

/** 
  * @brief  WWDG Init structure definition
  */
typedef struct
{
  uint32_t Prescaler;     /*!< Specifies the prescaler value of the WWDG.
                               This parameter can be a value of @ref WWDG_Prescaler */

  uint32_t Window;        /*!< Specifies the WWDG window value to be compared to the downcounter.
                               This parameter must be a number Min_Data = 0x40 and Max_Data = 0x7F */

  uint32_t Counter;       /*!< Specifies the WWDG free-running downcounter  value.
                               This parameter must be a number between Min_Data = 0x40 and Max_Data = 0x7F */

  uint32_t EWIMode ;      /*!< Specifies if WWDG Early Wakeup Interupt is enable or not.
                               This parameter can be a value of @ref WWDG_EWI_Mode */

}WWDG_InitTypeDef;

/**
  * @brief  WWDG handle Structure definition
  */
typedef struct
{
  WWDG_TypeDef                 *Instance;  /*!< Register base address    */

  WWDG_InitTypeDef             Init;       /*!< WWDG required parameters */

}WWDG_HandleTypeDef;
/**
  * @}
  */

/* Exported constants --------------------------------------------------------*/

/** @defgroup WWDG_Exported_Constants WWDG Exported Constants
  * @{
  */

/** @defgroup WWDG_Interrupt_definition WWDG Interrupt definition
  * @{
  */
#define WWDG_IT_EWI                         WWDG_CFR_EWI  /*!< Early wakeup interrupt */
/**
  * @}
  */

/** @defgroup WWDG_Flag_definition WWDG Flag definition
  * @brief WWDG Flag definition
  * @{
  */
#define WWDG_FLAG_EWIF                      WWDG_SR_EWIF  /*!< Early wakeup interrupt flag */
/**
  * @}
  */

/** @defgroup WWDG_Prescaler WWDG Prescaler
  * @{
  */ 
#define WWDG_PRESCALER_1                 0x00000000U  /*!< WWDG counter clock = (PCLK1/4096)/1 */
#define WWDG_PRESCALER_2                  WWDG_CFR_WDGTB0  /*!< WWDG counter clock = (PCLK1/4096)/2 */
#define WWDG_PRESCALER_4                  WWDG_CFR_WDGTB1  /*!< WWDG counter clock = (PCLK1/4096)/4 */
#define WWDG_PRESCALER_8                  WWDG_CFR_WDGTB  /*!< WWDG counter clock = (PCLK1/4096)/8 */
/**
  * @}
  */

/** @defgroup WWDG_EWI_Mode WWDG Early Wakeup Interrupt Mode
  * @{
  */
#define WWDG_EWI_DISABLE                    0x00000000U       /*!< EWI Disable */
#define WWDG_EWI_ENABLE                     WWDG_CFR_EWI      /*!< EWI Enable */
/**
  * @}
  */

/**
  * @}
  */

/* Private macros ------------------------------------------------------------*/

/** @defgroup WWDG_Private_Macros WWDG Private Macros
  * @{
  */
#define IS_WWDG_PRESCALER(__PRESCALER__)    (((__PRESCALER__) == WWDG_PRESCALER_1) || \
                                             ((__PRESCALER__) == WWDG_PRESCALER_2) || \
                                             ((__PRESCALER__) == WWDG_PRESCALER_4) || \
                                             ((__PRESCALER__) == WWDG_PRESCALER_8))

#define IS_WWDG_WINDOW(__WINDOW__)          (((__WINDOW__) >= WWDG_CFR_W_6) && ((__WINDOW__) <= WWDG_CFR_W))

#define IS_WWDG_COUNTER(__COUNTER__)        (((__COUNTER__) >= WWDG_CR_T_6) && ((__COUNTER__) <= WWDG_CR_T))

#define IS_WWDG_EWI_MODE(__MODE__)          (((__MODE__) == WWDG_EWI_ENABLE) || \
                                             ((__MODE__) == WWDG_EWI_DISABLE))
/**
  * @}
  */


/* Exported macros ------------------------------------------------------------*/

/** @defgroup WWDG_Exported_Macros WWDG Exported Macros
  * @{
  */

/**
  * @brief  Enables the WWDG peripheral.
  * @param  __HANDLE__ WWDG handle
  * @retval None
  */
#define __HAL_WWDG_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, WWDG_CR_WDGA)

/**
  * @brief  Enables the WWDG early wakeup interrupt.
  * @param  __HANDLE__ WWDG handle
  * @param  __INTERRUPT__  specifies the interrupt to enable.
  *         This parameter can be one of the following values:
  *            @arg WWDG_IT_EWI: Early wakeup interrupt
  * @note   Once enabled this interrupt cannot be disabled except by a system reset.
  * @retval None
  */
#define __HAL_WWDG_ENABLE_IT(__HANDLE__, __INTERRUPT__)       SET_BIT((__HANDLE__)->Instance->CFR, (__INTERRUPT__))

/**
  * @brief  Checks whether the selected WWDG interrupt has occurred or not.
  * @param  __HANDLE__  WWDG handle
  * @param  __INTERRUPT__  specifies the it to check.
  *        This parameter can be one of the following values:
  *            @arg WWDG_FLAG_EWIF: Early wakeup interrupt IT
  * @retval The new state of WWDG_FLAG (SET or RESET).
  */
#define __HAL_WWDG_GET_IT(__HANDLE__, __INTERRUPT__)       __HAL_WWDG_GET_FLAG((__HANDLE__),(__INTERRUPT__))

/** @brief  Clear the WWDG's interrupt pending bits
  *         bits to clear the selected interrupt pending bits.
  * @param  __HANDLE__ WWDG handle
  * @param  __INTERRUPT__ specifies the interrupt pending bit to clear.
  *         This parameter can be one of the following values:
  *            @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
  */
#define __HAL_WWDG_CLEAR_IT(__HANDLE__, __INTERRUPT__)     __HAL_WWDG_CLEAR_FLAG((__HANDLE__), (__INTERRUPT__))

/**
  * @brief  Check whether the specified WWDG flag is set or not.
  * @param  __HANDLE__  WWDG handle
  * @param  __FLAG__  specifies the flag to check.
  *         This parameter can be one of the following values:
  *            @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
  * @retval The new state of WWDG_FLAG (SET or RESET).
  */
#define __HAL_WWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))

/**
  * @brief  Clears the WWDG's pending flags.
  * @param  __HANDLE__ WWDG handle
  * @param  __FLAG__ specifies the flag to clear.
  *         This parameter can be one of the following values:
  *            @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
  * @retval None
  */
#define __HAL_WWDG_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = ~(__FLAG__))

/** @brief  Checks if the specified WWDG interrupt source is enabled or disabled.
  * @param  __HANDLE__ WWDG Handle.
  * @param  __INTERRUPT__ specifies the WWDG interrupt source to check.
  *          This parameter can be one of the following values:
  *            @arg WWDG_IT_EWI: Early Wakeup Interrupt
  * @retval state of __INTERRUPT__ (TRUE or FALSE).
  */
#define __HAL_WWDG_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CFR & (__INTERRUPT__)) == (__INTERRUPT__))

/**
  * @}
  */

/* Exported functions --------------------------------------------------------*/
/** @addtogroup WWDG_Exported_Functions
  * @{
  */

/** @addtogroup WWDG_Exported_Functions_Group1
  * @{
  */
/* Initialization/de-initialization functions  **********************************/
HAL_StatusTypeDef     HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg);
void                  HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg);
/**
  * @}
  */

/** @addtogroup WWDG_Exported_Functions_Group2
  * @{
  */
/* I/O operation functions ******************************************************/
HAL_StatusTypeDef     HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg);
void                  HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg);
void                  HAL_WWDG_EarlyWakeupCallback(WWDG_HandleTypeDef* hwwdg);
/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

#ifdef __cplusplus
}
#endif

#endif /* __STM32F4xx_HAL_WWDG_H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/