Mercurial > public > ostc4
view Documentations/dump-disc.cfg @ 223:5f535ef6a3db div-fixes-3
Bugfix, minor: properly alternate VPM/Buhlmann in deco loop
The idea of the counter in this commit is to compute the opposite
deco algorithm in 1:10 calls. So, when Buhlmann is selected,
also compute VPM with 1:10 sample rate (and vise versa).
The idea is good, but this never worked as the counter was local on
the stack, so was 0 for every call here. So, when switching between
deco algorithm, it took some refresh cycles as the computations
where not in sync.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
author | Jan Mulder <jlmulder@xs4all.nl> |
---|---|
date | Sun, 31 Mar 2019 15:14:06 +0200 |
parents | 01cc5959f199 |
children |
line wrap: on
line source
#! openocd -f # Define the prob used: source [find interface/stlink-v2.cfg] set WORKAREASIZE 0x8000 transport select hla_swd # Reset options set ENABLE_LOW_POWER 1 set STOP_WATCHDOG 1 reset_config srst_only srst_nogate connect_assert_srst # Seelct the right chip set CHIPNAME stm32f427IIT6 set CONNECT_UNDER_RESET 1 source [find target/stm32f4x.cfg] # Allow to continue execution after a connection: init_reset run puts "Flash banks:" flash banks #puts "Reading FIRMWARE..." # Requires OpenOCD 0.10.0 / released January 2017 ? #flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000 #puts "Done." exit