Mercurial > public > ostc4
view Small_CPU/Src/i2c.c @ 564:5e0a75e2f00b
Bugfix One or more deactivated sensors hide sensor display:
The sensor values were no longer displayed in case of a deactivated sensor. Root cause was the view available functionality which checked only if deactivation variable was set. Changed implementation to hide sensor views only if all sensors have been deactivated.
Make sure that alignment of strings is set before dual font handling:
The size (screen dimension) of a string needs the information regarding the font size to be used. If the dual font feature (using two font sizes in one string) is udes, the activation needs to happen after the definition of the alignment
author | Ideenmodellierer |
---|---|
date | Sun, 15 Nov 2020 20:09:31 +0100 |
parents | 4fe5400567e7 |
children |
line wrap: on
line source
#include "baseCPU2.h" #include "i2c.h" #include "scheduler.h" /* Private typedef -----------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/ /* Private macro -------------------------------------------------------------*/ // =============================================================================== // I2C addresses - see i2c.h // =============================================================================== I2C_HandleTypeDef I2cHandle; /* static void I2C_Error_Handler(void) { while(1) { } } */ GPIO_PinState HAL_I2C_Read_Data_PIN(void) { return HAL_GPIO_ReadPin(I2Cx_SDA_GPIO_PORT,I2Cx_SDA_PIN); } void HAL_I2C_Send_One_CLOCK(void) { HAL_GPIO_WritePin(I2Cx_SCL_GPIO_PORT, I2Cx_SCL_PIN, GPIO_PIN_RESET); HAL_Delay(1); HAL_GPIO_WritePin(I2Cx_SCL_GPIO_PORT, I2Cx_SCL_PIN, GPIO_PIN_SET); HAL_Delay(1); } GPIO_PinState MX_I2C1_TestAndClear(void) { GPIO_PinState retval; uint8_t repeatcnt = 3; I2C_DeInit(); HAL_I2C_ManualControl_MspInit(); /* The SDA line is expected to be HIGH if no com is pending => send dummy clock signals if that is not the case */ do { for(int i=0; i<20;i++) { if(HAL_I2C_Read_Data_PIN() == GPIO_PIN_RESET) HAL_I2C_Send_One_CLOCK(); else break; } retval = HAL_I2C_Read_Data_PIN(); }while ((repeatcnt-- > 0) && (retval != GPIO_PIN_SET)); return retval; } HAL_StatusTypeDef MX_I2C1_Init(void) { I2cHandle.Instance = I2Cx; I2cHandle.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT; I2cHandle.Init.ClockSpeed = 88000; /* Reduced to avoid behavior described in errata: Mismatch on the “Setup time for a repeated Start condition” */ I2cHandle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE; I2cHandle.Init.DutyCycle = I2C_DUTYCYCLE_2; /* don't care if not in fast mode */ I2cHandle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLED; I2cHandle.Init.NoStretchMode = I2C_NOSTRETCH_DISABLED; I2cHandle.Init.OwnAddress1 = 0x01; /* don't care because of master mode */ /* According to documentation setting filters before I2C initialization is recommended */ /* HAL_I2CEx_AnalogFilter_Config(&I2cHandle, I2C_ANALOGFILTER_ENABLED); */ HAL_I2CEx_ConfigDigitalFilter(&I2cHandle,0x0F); global.I2C_SystemStatus = HAL_I2C_Init(&I2cHandle); if(global.dataSendToSlavePending) { scheduleSpecial_Evaluate_DataSendToSlave(); } return global.I2C_SystemStatus; } void I2C_DeInit(void) { HAL_I2C_DeInit(&I2cHandle); } static uint8_t i2c_errors = 0; void I2C_Error_count(void) { i2c_errors++; } HAL_StatusTypeDef I2C_Master_Transmit( uint16_t DevAddress, uint8_t *pData, uint16_t Size) { if(global.I2C_SystemStatus != HAL_OK) return global.I2C_SystemStatus; global.I2C_SystemStatus = HAL_I2C_Master_Transmit(&I2cHandle, DevAddress, pData, Size, 10); if(global.I2C_SystemStatus != HAL_OK) { I2C_Error_count(); } return global.I2C_SystemStatus; } HAL_StatusTypeDef I2C_Master_Receive( uint16_t DevAddress, uint8_t *pData, uint16_t Size) { if(global.I2C_SystemStatus != HAL_OK) return global.I2C_SystemStatus; global.I2C_SystemStatus = HAL_I2C_Master_Receive(&I2cHandle, DevAddress, pData, Size, 10); if(global.I2C_SystemStatus != HAL_OK) { I2C_Error_count(); } return global.I2C_SystemStatus; }