Bugfix One or more deactivated sensors hide sensor display: The sensor values were no longer displayed in case of a deactivated sensor. Root cause was the view available functionality which checked only if deactivation variable was set. Changed implementation to hide sensor views only if all sensors have been deactivated. Make sure that alignment of strings is set before dual font handling: The size (screen dimension) of a string needs the information regarding the font size to be used. If the dual font feature (using two font sizes in one string) is udes, the activation needs to happen after the definition of the alignment

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f427IIT6
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

puts "Flash banks:"
flash banks

#puts "Reading FIRMWARE..."
# Requires OpenOCD 0.10.0 / released January 2017 ?
#flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000

#puts "Done."
exit