Mercurial > public > ostc4
view Common/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_exti.h @ 458:5dd996ed8611 minor_improvments
Added ppO2 to dummy profile data:
PPO2 calculation based on the first gas has been added to the dummy profile to enable drawing of the graph at log page four
As this increased the number of parameters to be passed to the sub functions, the complete dive header is passed as reference instead of single members to increase the code maintanability
| author | ideenmodellierer |
|---|---|
| date | Sat, 28 Mar 2020 21:41:47 +0100 |
| parents | c78bcbd5deda |
| children |
line wrap: on
line source
/** ****************************************************************************** * @file stm32f4xx_ll_exti.h * @author MCD Application Team * @brief Header file of EXTI LL module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_LL_EXTI_H #define __STM32F4xx_LL_EXTI_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx.h" /** @addtogroup STM32F4xx_LL_Driver * @{ */ #if defined (EXTI) /** @defgroup EXTI_LL EXTI * @{ */ /* Private types -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private constants ---------------------------------------------------------*/ /* Private Macros ------------------------------------------------------------*/ #if defined(USE_FULL_LL_DRIVER) /** @defgroup EXTI_LL_Private_Macros EXTI Private Macros * @{ */ /** * @} */ #endif /*USE_FULL_LL_DRIVER*/ /* Exported types ------------------------------------------------------------*/ #if defined(USE_FULL_LL_DRIVER) /** @defgroup EXTI_LL_ES_INIT EXTI Exported Init structure * @{ */ typedef struct { uint32_t Line_0_31; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 0 to 31 This parameter can be any combination of @ref EXTI_LL_EC_LINE */ FunctionalState LineCommand; /*!< Specifies the new state of the selected EXTI lines. This parameter can be set either to ENABLE or DISABLE */ uint8_t Mode; /*!< Specifies the mode for the EXTI lines. This parameter can be a value of @ref EXTI_LL_EC_MODE. */ uint8_t Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines. This parameter can be a value of @ref EXTI_LL_EC_TRIGGER. */ } LL_EXTI_InitTypeDef; /** * @} */ #endif /*USE_FULL_LL_DRIVER*/ /* Exported constants --------------------------------------------------------*/ /** @defgroup EXTI_LL_Exported_Constants EXTI Exported Constants * @{ */ /** @defgroup EXTI_LL_EC_LINE LINE * @{ */ #define LL_EXTI_LINE_0 EXTI_IMR_IM0 /*!< Extended line 0 */ #define LL_EXTI_LINE_1 EXTI_IMR_IM1 /*!< Extended line 1 */ #define LL_EXTI_LINE_2 EXTI_IMR_IM2 /*!< Extended line 2 */ #define LL_EXTI_LINE_3 EXTI_IMR_IM3 /*!< Extended line 3 */ #define LL_EXTI_LINE_4 EXTI_IMR_IM4 /*!< Extended line 4 */ #define LL_EXTI_LINE_5 EXTI_IMR_IM5 /*!< Extended line 5 */ #define LL_EXTI_LINE_6 EXTI_IMR_IM6 /*!< Extended line 6 */ #define LL_EXTI_LINE_7 EXTI_IMR_IM7 /*!< Extended line 7 */ #define LL_EXTI_LINE_8 EXTI_IMR_IM8 /*!< Extended line 8 */ #define LL_EXTI_LINE_9 EXTI_IMR_IM9 /*!< Extended line 9 */ #define LL_EXTI_LINE_10 EXTI_IMR_IM10 /*!< Extended line 10 */ #define LL_EXTI_LINE_11 EXTI_IMR_IM11 /*!< Extended line 11 */ #define LL_EXTI_LINE_12 EXTI_IMR_IM12 /*!< Extended line 12 */ #define LL_EXTI_LINE_13 EXTI_IMR_IM13 /*!< Extended line 13 */ #define LL_EXTI_LINE_14 EXTI_IMR_IM14 /*!< Extended line 14 */ #define LL_EXTI_LINE_15 EXTI_IMR_IM15 /*!< Extended line 15 */ #if defined(EXTI_IMR_IM16) #define LL_EXTI_LINE_16 EXTI_IMR_IM16 /*!< Extended line 16 */ #endif #define LL_EXTI_LINE_17 EXTI_IMR_IM17 /*!< Extended line 17 */ #if defined(EXTI_IMR_IM18) #define LL_EXTI_LINE_18 EXTI_IMR_IM18 /*!< Extended line 18 */ #endif #define LL_EXTI_LINE_19 EXTI_IMR_IM19 /*!< Extended line 19 */ #if defined(EXTI_IMR_IM20) #define LL_EXTI_LINE_20 EXTI_IMR_IM20 /*!< Extended line 20 */ #endif #if defined(EXTI_IMR_IM21) #define LL_EXTI_LINE_21 EXTI_IMR_IM21 /*!< Extended line 21 */ #endif #if defined(EXTI_IMR_IM22) #define LL_EXTI_LINE_22 EXTI_IMR_IM22 /*!< Extended line 22 */ #endif #if defined(EXTI_IMR_IM23) #define LL_EXTI_LINE_23 EXTI_IMR_IM23 /*!< Extended line 23 */ #endif #if defined(EXTI_IMR_IM24) #define LL_EXTI_LINE_24 EXTI_IMR_IM24 /*!< Extended line 24 */ #endif #if defined(EXTI_IMR_IM25) #define LL_EXTI_LINE_25 EXTI_IMR_IM25 /*!< Extended line 25 */ #endif #if defined(EXTI_IMR_IM26) #define LL_EXTI_LINE_26 EXTI_IMR_IM26 /*!< Extended line 26 */ #endif #if defined(EXTI_IMR_IM27) #define LL_EXTI_LINE_27 EXTI_IMR_IM27 /*!< Extended line 27 */ #endif #if defined(EXTI_IMR_IM28) #define LL_EXTI_LINE_28 EXTI_IMR_IM28 /*!< Extended line 28 */ #endif #if defined(EXTI_IMR_IM29) #define LL_EXTI_LINE_29 EXTI_IMR_IM29 /*!< Extended line 29 */ #endif #if defined(EXTI_IMR_IM30) #define LL_EXTI_LINE_30 EXTI_IMR_IM30 /*!< Extended line 30 */ #endif #if defined(EXTI_IMR_IM31) #define LL_EXTI_LINE_31 EXTI_IMR_IM31 /*!< Extended line 31 */ #endif #define LL_EXTI_LINE_ALL_0_31 EXTI_IMR_IM /*!< All Extended line not reserved*/ #define LL_EXTI_LINE_ALL ((uint32_t)0xFFFFFFFFU) /*!< All Extended line */ #if defined(USE_FULL_LL_DRIVER) #define LL_EXTI_LINE_NONE ((uint32_t)0x00000000U) /*!< None Extended line */ #endif /*USE_FULL_LL_DRIVER*/ /** * @} */ #if defined(USE_FULL_LL_DRIVER) /** @defgroup EXTI_LL_EC_MODE Mode * @{ */ #define LL_EXTI_MODE_IT ((uint8_t)0x00U) /*!< Interrupt Mode */ #define LL_EXTI_MODE_EVENT ((uint8_t)0x01U) /*!< Event Mode */ #define LL_EXTI_MODE_IT_EVENT ((uint8_t)0x02U) /*!< Interrupt & Event Mode */ /** * @} */ /** @defgroup EXTI_LL_EC_TRIGGER Edge Trigger * @{ */ #define LL_EXTI_TRIGGER_NONE ((uint8_t)0x00U) /*!< No Trigger Mode */ #define LL_EXTI_TRIGGER_RISING ((uint8_t)0x01U) /*!< Trigger Rising Mode */ #define LL_EXTI_TRIGGER_FALLING ((uint8_t)0x02U) /*!< Trigger Falling Mode */ #define LL_EXTI_TRIGGER_RISING_FALLING ((uint8_t)0x03U) /*!< Trigger Rising & Falling Mode */ /** * @} */ #endif /*USE_FULL_LL_DRIVER*/ /** * @} */ /* Exported macro ------------------------------------------------------------*/ /** @defgroup EXTI_LL_Exported_Macros EXTI Exported Macros * @{ */ /** @defgroup EXTI_LL_EM_WRITE_READ Common Write and read registers Macros * @{ */ /** * @brief Write a value in EXTI register * @param __REG__ Register to be written * @param __VALUE__ Value to be written in the register * @retval None */ #define LL_EXTI_WriteReg(__REG__, __VALUE__) WRITE_REG(EXTI->__REG__, (__VALUE__)) /** * @brief Read a value in EXTI register * @param __REG__ Register to be read * @retval Register value */ #define LL_EXTI_ReadReg(__REG__) READ_REG(EXTI->__REG__) /** * @} */ /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @defgroup EXTI_LL_Exported_Functions EXTI Exported Functions * @{ */ /** @defgroup EXTI_LL_EF_IT_Management IT_Management * @{ */ /** * @brief Enable ExtiLine Interrupt request for Lines in range 0 to 31 * @note The reset value for the direct or internal lines (see RM) * is set to 1 in order to enable the interrupt by default. * Bits are set automatically at Power on. * @rmtoll IMR IMx LL_EXTI_EnableIT_0_31 * @param ExtiLine This parameter can be one of the following values: * @arg @ref LL_EXTI_LINE_0 * @arg @ref LL_EXTI_LINE_1 * @arg @ref LL_EXTI_LINE_2 * @arg @ref LL_EXTI_LINE_3 * @arg @ref LL_EXTI_LINE_4 * @arg @ref LL_EXTI_LINE_5 * @arg @ref LL_EXTI_LINE_6 * @arg @ref LL_EXTI_LINE_7 * @arg @ref LL_EXTI_LINE_8 * @arg @ref LL_EXTI_LINE_9 * @arg @ref LL_EXTI_LINE_10 * @arg @ref LL_EXTI_LINE_11 * @arg @ref LL_EXTI_LINE_12 * @arg @ref LL_EXTI_LINE_13 * @arg @ref LL_EXTI_LINE_14 * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19(*) * @arg @ref LL_EXTI_LINE_20(*) * @arg @ref LL_EXTI_LINE_21 * @arg @ref LL_EXTI_LINE_22 * @arg @ref LL_EXTI_LINE_23(*) * @arg @ref LL_EXTI_LINE_ALL_0_31 * @note (*): Available in some devices * @note Please check each device line mapping for EXTI Line availability * @retval None */ __STATIC_INLINE void LL_EXTI_EnableIT_0_31(uint32_t ExtiLine) { SET_BIT(EXTI->IMR, ExtiLine); } /** * @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31 * @note The reset value for the direct or internal lines (see RM) * is set to 1 in order to enable the interrupt by default. * Bits are set automatically at Power on. * @rmtoll IMR IMx LL_EXTI_DisableIT_0_31 * @param ExtiLine This parameter can be one of the following values: * @arg @ref LL_EXTI_LINE_0 * @arg @ref LL_EXTI_LINE_1 * @arg @ref LL_EXTI_LINE_2 * @arg @ref LL_EXTI_LINE_3 * @arg @ref LL_EXTI_LINE_4 * @arg @ref LL_EXTI_LINE_5 * @arg @ref LL_EXTI_LINE_6 * @arg @ref LL_EXTI_LINE_7 * @arg @ref LL_EXTI_LINE_8 * @arg @ref LL_EXTI_LINE_9 * @arg @ref LL_EXTI_LINE_10 * @arg @ref LL_EXTI_LINE_11 * @arg @ref LL_EXTI_LINE_12 * @arg @ref LL_EXTI_LINE_13 * @arg @ref LL_EXTI_LINE_14 * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19(*) * @arg @ref LL_EXTI_LINE_20(*) * @arg @ref LL_EXTI_LINE_21 * @arg @ref LL_EXTI_LINE_22 * @arg @ref LL_EXTI_LINE_23(*) * @arg @ref LL_EXTI_LINE_ALL_0_31 * @note (*): Available in some devices * @note Please check each device line mapping for EXTI Line availability * @retval None */ __STATIC_INLINE void LL_EXTI_DisableIT_0_31(uint32_t ExtiLine) { CLEAR_BIT(EXTI->IMR, ExtiLine); } /** * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31 * @note The reset value for the direct or internal lines (see RM) * is set to 1 in order to enable the interrupt by default. * Bits are set automatically at Power on. * @rmtoll IMR IMx LL_EXTI_IsEnabledIT_0_31 * @param ExtiLine This parameter can be one of the following values: * @arg @ref LL_EXTI_LINE_0 * @arg @ref LL_EXTI_LINE_1 * @arg @ref LL_EXTI_LINE_2 * @arg @ref LL_EXTI_LINE_3 * @arg @ref LL_EXTI_LINE_4 * @arg @ref LL_EXTI_LINE_5 * @arg @ref LL_EXTI_LINE_6 * @arg @ref LL_EXTI_LINE_7 * @arg @ref LL_EXTI_LINE_8 * @arg @ref LL_EXTI_LINE_9 * @arg @ref LL_EXTI_LINE_10 * @arg @ref LL_EXTI_LINE_11 * @arg @ref LL_EXTI_LINE_12 * @arg @ref LL_EXTI_LINE_13 * @arg @ref LL_EXTI_LINE_14 * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19(*) * @arg @ref LL_EXTI_LINE_20(*) * @arg @ref LL_EXTI_LINE_21 * @arg @ref LL_EXTI_LINE_22 * @arg @ref LL_EXTI_LINE_23(*) * @arg @ref LL_EXTI_LINE_ALL_0_31 * @note (*): Available in some devices * @note Please check each device line mapping for EXTI Line availability * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine) { return (READ_BIT(EXTI->IMR, ExtiLine) == (ExtiLine)); } /** * @} */ /** @defgroup EXTI_LL_EF_Event_Management Event_Management * @{ */ /** * @brief Enable ExtiLine Event request for Lines in range 0 to 31 * @rmtoll EMR EMx LL_EXTI_EnableEvent_0_31 * @param ExtiLine This parameter can be one of the following values: * @arg @ref LL_EXTI_LINE_0 * @arg @ref LL_EXTI_LINE_1 * @arg @ref LL_EXTI_LINE_2 * @arg @ref LL_EXTI_LINE_3 * @arg @ref LL_EXTI_LINE_4 * @arg @ref LL_EXTI_LINE_5 * @arg @ref LL_EXTI_LINE_6 * @arg @ref LL_EXTI_LINE_7 * @arg @ref LL_EXTI_LINE_8 * @arg @ref LL_EXTI_LINE_9 * @arg @ref LL_EXTI_LINE_10 * @arg @ref LL_EXTI_LINE_11 * @arg @ref LL_EXTI_LINE_12 * @arg @ref LL_EXTI_LINE_13 * @arg @ref LL_EXTI_LINE_14 * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19(*) * @arg @ref LL_EXTI_LINE_20(*) * @arg @ref LL_EXTI_LINE_21 * @arg @ref LL_EXTI_LINE_22 * @arg @ref LL_EXTI_LINE_23(*) * @arg @ref LL_EXTI_LINE_ALL_0_31 * @note (*): Available in some devices * @note Please check each device line mapping for EXTI Line availability * @retval None */ __STATIC_INLINE void LL_EXTI_EnableEvent_0_31(uint32_t ExtiLine) { SET_BIT(EXTI->EMR, ExtiLine); } /** * @brief Disable ExtiLine Event request for Lines in range 0 to 31 * @rmtoll EMR EMx LL_EXTI_DisableEvent_0_31 * @param ExtiLine This parameter can be one of the following values: * @arg @ref LL_EXTI_LINE_0 * @arg @ref LL_EXTI_LINE_1 * @arg @ref LL_EXTI_LINE_2 * @arg @ref LL_EXTI_LINE_3 * @arg @ref LL_EXTI_LINE_4 * @arg @ref LL_EXTI_LINE_5 * @arg @ref LL_EXTI_LINE_6 * @arg @ref LL_EXTI_LINE_7 * @arg @ref LL_EXTI_LINE_8 * @arg @ref LL_EXTI_LINE_9 * @arg @ref LL_EXTI_LINE_10 * @arg @ref LL_EXTI_LINE_11 * @arg @ref LL_EXTI_LINE_12 * @arg @ref LL_EXTI_LINE_13 * @arg @ref LL_EXTI_LINE_14 * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19(*) * @arg @ref LL_EXTI_LINE_20(*) * @arg @ref LL_EXTI_LINE_21 * @arg @ref LL_EXTI_LINE_22 * @arg @ref LL_EXTI_LINE_23(*) * @arg @ref LL_EXTI_LINE_ALL_0_31 * @note (*): Available in some devices * @note Please check each device line mapping for EXTI Line availability * @retval None */ __STATIC_INLINE void LL_EXTI_DisableEvent_0_31(uint32_t ExtiLine) { CLEAR_BIT(EXTI->EMR, ExtiLine); } /** * @brief Indicate if ExtiLine Event request is enabled for Lines in range 0 to 31 * @rmtoll EMR EMx LL_EXTI_IsEnabledEvent_0_31 * @param ExtiLine This parameter can be one of the following values: * @arg @ref LL_EXTI_LINE_0 * @arg @ref LL_EXTI_LINE_1 * @arg @ref LL_EXTI_LINE_2 * @arg @ref LL_EXTI_LINE_3 * @arg @ref LL_EXTI_LINE_4 * @arg @ref LL_EXTI_LINE_5 * @arg @ref LL_EXTI_LINE_6 * @arg @ref LL_EXTI_LINE_7 * @arg @ref LL_EXTI_LINE_8 * @arg @ref LL_EXTI_LINE_9 * @arg @ref LL_EXTI_LINE_10 * @arg @ref LL_EXTI_LINE_11 * @arg @ref LL_EXTI_LINE_12 * @arg @ref LL_EXTI_LINE_13 * @arg @ref LL_EXTI_LINE_14 * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19(*) * @arg @ref LL_EXTI_LINE_20(*) * @arg @ref LL_EXTI_LINE_21 * @arg @ref LL_EXTI_LINE_22 * @arg @ref LL_EXTI_LINE_23(*) * @arg @ref LL_EXTI_LINE_ALL_0_31 * @note (*): Available in some devices * @note Please check each device line mapping for EXTI Line availability * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine) { return (READ_BIT(EXTI->EMR, ExtiLine) == (ExtiLine)); } /** * @} */ /** @defgroup EXTI_LL_EF_Rising_Trigger_Management Rising_Trigger_Management * @{ */ /** * @brief Enable ExtiLine Rising Edge Trigger for Lines in range 0 to 31 * @note The configurable wakeup lines are edge-triggered. No glitch must be * generated on these lines. If a rising edge on a configurable interrupt * line occurs during a write operation in the EXTI_RTSR register, the * pending bit is not set. * Rising and falling edge triggers can be set for * the same interrupt line. In this case, both generate a trigger * condition. * @rmtoll RTSR RTx LL_EXTI_EnableRisingTrig_0_31 * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_0 * @arg @ref LL_EXTI_LINE_1 * @arg @ref LL_EXTI_LINE_2 * @arg @ref LL_EXTI_LINE_3 * @arg @ref LL_EXTI_LINE_4 * @arg @ref LL_EXTI_LINE_5 * @arg @ref LL_EXTI_LINE_6 * @arg @ref LL_EXTI_LINE_7 * @arg @ref LL_EXTI_LINE_8 * @arg @ref LL_EXTI_LINE_9 * @arg @ref LL_EXTI_LINE_10 * @arg @ref LL_EXTI_LINE_11 * @arg @ref LL_EXTI_LINE_12 * @arg @ref LL_EXTI_LINE_13 * @arg @ref LL_EXTI_LINE_14 * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19(*) * @arg @ref LL_EXTI_LINE_20(*) * @arg @ref LL_EXTI_LINE_21 * @arg @ref LL_EXTI_LINE_22 * @note (*): Available in some devices * @note Please check each device line mapping for EXTI Line availability * @retval None */ __STATIC_INLINE void LL_EXTI_EnableRisingTrig_0_31(uint32_t ExtiLine) { SET_BIT(EXTI->RTSR, ExtiLine); } /** * @brief Disable ExtiLine Rising Edge Trigger for Lines in range 0 to 31 * @note The configurable wakeup lines are edge-triggered. No glitch must be * generated on these lines. If a rising edge on a configurable interrupt * line occurs during a write operation in the EXTI_RTSR register, the * pending bit is not set. * Rising and falling edge triggers can be set for * the same interrupt line. In this case, both generate a trigger * condition. * @rmtoll RTSR RTx LL_EXTI_DisableRisingTrig_0_31 * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_0 * @arg @ref LL_EXTI_LINE_1 * @arg @ref LL_EXTI_LINE_2 * @arg @ref LL_EXTI_LINE_3 * @arg @ref LL_EXTI_LINE_4 * @arg @ref LL_EXTI_LINE_5 * @arg @ref LL_EXTI_LINE_6 * @arg @ref LL_EXTI_LINE_7 * @arg @ref LL_EXTI_LINE_8 * @arg @ref LL_EXTI_LINE_9 * @arg @ref LL_EXTI_LINE_10 * @arg @ref LL_EXTI_LINE_11 * @arg @ref LL_EXTI_LINE_12 * @arg @ref LL_EXTI_LINE_13 * @arg @ref LL_EXTI_LINE_14 * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19(*) * @arg @ref LL_EXTI_LINE_20(*) * @arg @ref LL_EXTI_LINE_21 * @arg @ref LL_EXTI_LINE_22 * @note (*): Available in some devices * @note Please check each device line mapping for EXTI Line availability * @retval None */ __STATIC_INLINE void LL_EXTI_DisableRisingTrig_0_31(uint32_t ExtiLine) { CLEAR_BIT(EXTI->RTSR, ExtiLine); } /** * @brief Check if rising edge trigger is enabled for Lines in range 0 to 31 * @rmtoll RTSR RTx LL_EXTI_IsEnabledRisingTrig_0_31 * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_0 * @arg @ref LL_EXTI_LINE_1 * @arg @ref LL_EXTI_LINE_2 * @arg @ref LL_EXTI_LINE_3 * @arg @ref LL_EXTI_LINE_4 * @arg @ref LL_EXTI_LINE_5 * @arg @ref LL_EXTI_LINE_6 * @arg @ref LL_EXTI_LINE_7 * @arg @ref LL_EXTI_LINE_8 * @arg @ref LL_EXTI_LINE_9 * @arg @ref LL_EXTI_LINE_10 * @arg @ref LL_EXTI_LINE_11 * @arg @ref LL_EXTI_LINE_12 * @arg @ref LL_EXTI_LINE_13 * @arg @ref LL_EXTI_LINE_14 * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19(*) * @arg @ref LL_EXTI_LINE_20(*) * @arg @ref LL_EXTI_LINE_21 * @arg @ref LL_EXTI_LINE_22 * @note (*): Available in some devices * @note Please check each device line mapping for EXTI Line availability * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_0_31(uint32_t ExtiLine) { return (READ_BIT(EXTI->RTSR, ExtiLine) == (ExtiLine)); } /** * @} */ /** @defgroup EXTI_LL_EF_Falling_Trigger_Management Falling_Trigger_Management * @{ */ /** * @brief Enable ExtiLine Falling Edge Trigger for Lines in range 0 to 31 * @note The configurable wakeup lines are edge-triggered. No glitch must be * generated on these lines. If a falling edge on a configurable interrupt * line occurs during a write operation in the EXTI_FTSR register, the * pending bit is not set. * Rising and falling edge triggers can be set for * the same interrupt line. In this case, both generate a trigger * condition. * @rmtoll FTSR FTx LL_EXTI_EnableFallingTrig_0_31 * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_0 * @arg @ref LL_EXTI_LINE_1 * @arg @ref LL_EXTI_LINE_2 * @arg @ref LL_EXTI_LINE_3 * @arg @ref LL_EXTI_LINE_4 * @arg @ref LL_EXTI_LINE_5 * @arg @ref LL_EXTI_LINE_6 * @arg @ref LL_EXTI_LINE_7 * @arg @ref LL_EXTI_LINE_8 * @arg @ref LL_EXTI_LINE_9 * @arg @ref LL_EXTI_LINE_10 * @arg @ref LL_EXTI_LINE_11 * @arg @ref LL_EXTI_LINE_12 * @arg @ref LL_EXTI_LINE_13 * @arg @ref LL_EXTI_LINE_14 * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19(*) * @arg @ref LL_EXTI_LINE_20(*) * @arg @ref LL_EXTI_LINE_21 * @arg @ref LL_EXTI_LINE_22 * @note (*): Available in some devices * @note Please check each device line mapping for EXTI Line availability * @retval None */ __STATIC_INLINE void LL_EXTI_EnableFallingTrig_0_31(uint32_t ExtiLine) { SET_BIT(EXTI->FTSR, ExtiLine); } /** * @brief Disable ExtiLine Falling Edge Trigger for Lines in range 0 to 31 * @note The configurable wakeup lines are edge-triggered. No glitch must be * generated on these lines. If a Falling edge on a configurable interrupt * line occurs during a write operation in the EXTI_FTSR register, the * pending bit is not set. * Rising and falling edge triggers can be set for the same interrupt line. * In this case, both generate a trigger condition. * @rmtoll FTSR FTx LL_EXTI_DisableFallingTrig_0_31 * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_0 * @arg @ref LL_EXTI_LINE_1 * @arg @ref LL_EXTI_LINE_2 * @arg @ref LL_EXTI_LINE_3 * @arg @ref LL_EXTI_LINE_4 * @arg @ref LL_EXTI_LINE_5 * @arg @ref LL_EXTI_LINE_6 * @arg @ref LL_EXTI_LINE_7 * @arg @ref LL_EXTI_LINE_8 * @arg @ref LL_EXTI_LINE_9 * @arg @ref LL_EXTI_LINE_10 * @arg @ref LL_EXTI_LINE_11 * @arg @ref LL_EXTI_LINE_12 * @arg @ref LL_EXTI_LINE_13 * @arg @ref LL_EXTI_LINE_14 * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19(*) * @arg @ref LL_EXTI_LINE_20(*) * @arg @ref LL_EXTI_LINE_21 * @arg @ref LL_EXTI_LINE_22 * @note (*): Available in some devices * @note Please check each device line mapping for EXTI Line availability * @retval None */ __STATIC_INLINE void LL_EXTI_DisableFallingTrig_0_31(uint32_t ExtiLine) { CLEAR_BIT(EXTI->FTSR, ExtiLine); } /** * @brief Check if falling edge trigger is enabled for Lines in range 0 to 31 * @rmtoll FTSR FTx LL_EXTI_IsEnabledFallingTrig_0_31 * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_0 * @arg @ref LL_EXTI_LINE_1 * @arg @ref LL_EXTI_LINE_2 * @arg @ref LL_EXTI_LINE_3 * @arg @ref LL_EXTI_LINE_4 * @arg @ref LL_EXTI_LINE_5 * @arg @ref LL_EXTI_LINE_6 * @arg @ref LL_EXTI_LINE_7 * @arg @ref LL_EXTI_LINE_8 * @arg @ref LL_EXTI_LINE_9 * @arg @ref LL_EXTI_LINE_10 * @arg @ref LL_EXTI_LINE_11 * @arg @ref LL_EXTI_LINE_12 * @arg @ref LL_EXTI_LINE_13 * @arg @ref LL_EXTI_LINE_14 * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19(*) * @arg @ref LL_EXTI_LINE_20(*) * @arg @ref LL_EXTI_LINE_21 * @arg @ref LL_EXTI_LINE_22 * @note (*): Available in some devices * @note Please check each device line mapping for EXTI Line availability * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_0_31(uint32_t ExtiLine) { return (READ_BIT(EXTI->FTSR, ExtiLine) == (ExtiLine)); } /** * @} */ /** @defgroup EXTI_LL_EF_Software_Interrupt_Management Software_Interrupt_Management * @{ */ /** * @brief Generate a software Interrupt Event for Lines in range 0 to 31 * @note If the interrupt is enabled on this line in the EXTI_IMR, writing a 1 to * this bit when it is at '0' sets the corresponding pending bit in EXTI_PR * resulting in an interrupt request generation. * This bit is cleared by clearing the corresponding bit in the EXTI_PR * register (by writing a 1 into the bit) * @rmtoll SWIER SWIx LL_EXTI_GenerateSWI_0_31 * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_0 * @arg @ref LL_EXTI_LINE_1 * @arg @ref LL_EXTI_LINE_2 * @arg @ref LL_EXTI_LINE_3 * @arg @ref LL_EXTI_LINE_4 * @arg @ref LL_EXTI_LINE_5 * @arg @ref LL_EXTI_LINE_6 * @arg @ref LL_EXTI_LINE_7 * @arg @ref LL_EXTI_LINE_8 * @arg @ref LL_EXTI_LINE_9 * @arg @ref LL_EXTI_LINE_10 * @arg @ref LL_EXTI_LINE_11 * @arg @ref LL_EXTI_LINE_12 * @arg @ref LL_EXTI_LINE_13 * @arg @ref LL_EXTI_LINE_14 * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19(*) * @arg @ref LL_EXTI_LINE_20(*) * @arg @ref LL_EXTI_LINE_21 * @arg @ref LL_EXTI_LINE_22 * @note (*): Available in some devices * @note Please check each device line mapping for EXTI Line availability * @retval None */ __STATIC_INLINE void LL_EXTI_GenerateSWI_0_31(uint32_t ExtiLine) { SET_BIT(EXTI->SWIER, ExtiLine); } /** * @} */ /** @defgroup EXTI_LL_EF_Flag_Management Flag_Management * @{ */ /** * @brief Check if the ExtLine Flag is set or not for Lines in range 0 to 31 * @note This bit is set when the selected edge event arrives on the interrupt * line. This bit is cleared by writing a 1 to the bit. * @rmtoll PR PIFx LL_EXTI_IsActiveFlag_0_31 * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_0 * @arg @ref LL_EXTI_LINE_1 * @arg @ref LL_EXTI_LINE_2 * @arg @ref LL_EXTI_LINE_3 * @arg @ref LL_EXTI_LINE_4 * @arg @ref LL_EXTI_LINE_5 * @arg @ref LL_EXTI_LINE_6 * @arg @ref LL_EXTI_LINE_7 * @arg @ref LL_EXTI_LINE_8 * @arg @ref LL_EXTI_LINE_9 * @arg @ref LL_EXTI_LINE_10 * @arg @ref LL_EXTI_LINE_11 * @arg @ref LL_EXTI_LINE_12 * @arg @ref LL_EXTI_LINE_13 * @arg @ref LL_EXTI_LINE_14 * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19(*) * @arg @ref LL_EXTI_LINE_20(*) * @arg @ref LL_EXTI_LINE_21 * @arg @ref LL_EXTI_LINE_22 * @note (*): Available in some devices * @note Please check each device line mapping for EXTI Line availability * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_0_31(uint32_t ExtiLine) { return (READ_BIT(EXTI->PR, ExtiLine) == (ExtiLine)); } /** * @brief Read ExtLine Combination Flag for Lines in range 0 to 31 * @note This bit is set when the selected edge event arrives on the interrupt * line. This bit is cleared by writing a 1 to the bit. * @rmtoll PR PIFx LL_EXTI_ReadFlag_0_31 * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_0 * @arg @ref LL_EXTI_LINE_1 * @arg @ref LL_EXTI_LINE_2 * @arg @ref LL_EXTI_LINE_3 * @arg @ref LL_EXTI_LINE_4 * @arg @ref LL_EXTI_LINE_5 * @arg @ref LL_EXTI_LINE_6 * @arg @ref LL_EXTI_LINE_7 * @arg @ref LL_EXTI_LINE_8 * @arg @ref LL_EXTI_LINE_9 * @arg @ref LL_EXTI_LINE_10 * @arg @ref LL_EXTI_LINE_11 * @arg @ref LL_EXTI_LINE_12 * @arg @ref LL_EXTI_LINE_13 * @arg @ref LL_EXTI_LINE_14 * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19(*) * @arg @ref LL_EXTI_LINE_20(*) * @arg @ref LL_EXTI_LINE_21 * @arg @ref LL_EXTI_LINE_22 * @note (*): Available in some devices * @note Please check each device line mapping for EXTI Line availability * @retval @note This bit is set when the selected edge event arrives on the interrupt */ __STATIC_INLINE uint32_t LL_EXTI_ReadFlag_0_31(uint32_t ExtiLine) { return (uint32_t)(READ_BIT(EXTI->PR, ExtiLine)); } /** * @brief Clear ExtLine Flags for Lines in range 0 to 31 * @note This bit is set when the selected edge event arrives on the interrupt * line. This bit is cleared by writing a 1 to the bit. * @rmtoll PR PIFx LL_EXTI_ClearFlag_0_31 * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_0 * @arg @ref LL_EXTI_LINE_1 * @arg @ref LL_EXTI_LINE_2 * @arg @ref LL_EXTI_LINE_3 * @arg @ref LL_EXTI_LINE_4 * @arg @ref LL_EXTI_LINE_5 * @arg @ref LL_EXTI_LINE_6 * @arg @ref LL_EXTI_LINE_7 * @arg @ref LL_EXTI_LINE_8 * @arg @ref LL_EXTI_LINE_9 * @arg @ref LL_EXTI_LINE_10 * @arg @ref LL_EXTI_LINE_11 * @arg @ref LL_EXTI_LINE_12 * @arg @ref LL_EXTI_LINE_13 * @arg @ref LL_EXTI_LINE_14 * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19(*) * @arg @ref LL_EXTI_LINE_20(*) * @arg @ref LL_EXTI_LINE_21 * @arg @ref LL_EXTI_LINE_22 * @note (*): Available in some devices * @note Please check each device line mapping for EXTI Line availability * @retval None */ __STATIC_INLINE void LL_EXTI_ClearFlag_0_31(uint32_t ExtiLine) { WRITE_REG(EXTI->PR, ExtiLine); } /** * @} */ #if defined(USE_FULL_LL_DRIVER) /** @defgroup EXTI_LL_EF_Init Initialization and de-initialization functions * @{ */ uint32_t LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct); uint32_t LL_EXTI_DeInit(void); void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct); /** * @} */ #endif /* USE_FULL_LL_DRIVER */ /** * @} */ /** * @} */ #endif /* EXTI */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32F4xx_LL_EXTI_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/