///////////////////////////////////////////////////////////////////////////////+
−
/// -*- coding: UTF-8 -*-+
−
///+
−
/// \file   Discovery/Inc/configuration.h+
−
/// \brief  Header file for variant specific firmware adaptations at compile time+
−
/// \author heinrichs weikamp gmbh+
−
/// \date   29-February-2020+
−
///+
−
/// $Id$+
−
///////////////////////////////////////////////////////////////////////////////+
−
/// \par Copyright (c) 2014-2020 Heinrichs Weikamp gmbh+
−
///+
−
///     This program is free software: you can redistribute it and/or modify+
−
///     it under the terms of the GNU General Public License as published by+
−
///     the Free Software Foundation, either version 3 of the License, or+
−
///     (at your option) any later version.+
−
///+
−
///     This program is distributed in the hope that it will be useful,+
−
///     but WITHOUT ANY WARRANTY; without even the implied warranty of+
−
///     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the+
−
///     GNU General Public License for more details.+
−
///+
−
///     You should have received a copy of the GNU General Public License+
−
///     along with this program.  If not, see <http://www.gnu.org/licenses/>.+
−
//////////////////////////////////////////////////////////////////////////////+
−
+
−
#ifndef CONFIGURATION_HEADER+
−
#define CONFIGURATION_HEADER+
−
+
−
/* Enable this to make the simulator write a logbook entry */+
−
/* #define SIM_WRITES_LOGBOOK 1 */+
−
+
−
/* Enable this for support of optical bottle pressure interface */+
−
/* #define ENABLE_BOTTLE_SENSOR */+
−
+
−
/* Enable this to show voltage in parallel to charge state */+
−
#define ALWAYS_SHOW_VOLTAGE+
−
+
−
/* Enable this to skip coplete scan of dive log during startup */+
−
#define TRUST_LOG_CONSISTENCY+
−
+
−
/* Enable this to transfer additional data list last dive ID and last sample index during raw data requests */+
−
/* define SEND_DATA_DETAILS */+
−
+
−
/* Enable to activate a menu item in reset menu which provide sample ring analysis / repair functionality */+
−
/* #define ENABLE_ANALYSE_SAMPLES */+
−
+
−
/* Enable to have access to the debug view options (turn on / off via menu instead of compile switch) */+
−
/* #define HAVE_DEBUG_VIEW */+
−
+
−
/* Enable to have runtime information displayed in t7 debug view */+
−
/* #define T7_DEBUG_RUNTIME */+
−
+
−
/* Enable to have event based warnings being displayed as warning messages when they occur */+
−
/* #define HAVE_DEBUG_WARNINGS */+
−
+
−
/* Enable to have access to the motion control selection menu */+
−
/* #define ENABLE_MOTION_CONTROL */+
−
+
−
/* Enable to have option to hide not needed gases from dive views */+
−
/* #define ENABLE_UNUSED_GAS_HIDING */+
−
+
−
/* Enable to have the new T3 profile view available */+
−
#define ENABLE_T3_PROFILE_VIEW+
−
+
−
/* Enable to have PPO2 adjustments in T3 sensor view during dive simulation */+
−
/* #define ENABLE_T3_PPO_SIM */+
−
+
−
/* Enable to have PSCR functionality available */+
−
#define ENABLE_PSCR_MODE+
−
+
−
/* Enable to have CO2 sensor functionality available */+
−
#define ENABLE_CO2_SUPPORT+
−
+
−
/* Enable to have GPS sensor functionality available */+
−
/* #define ENABLE_GNSS_SUPPORT */+
−
+
−
/* Enable to have Sentinel rebreather interface available */+
−
/* #define ENABLE_SENTINEL_MODE */+
−
+
−
/* Enable if you are using sensors with a voltage range 8..16 mV at surface / air level */+
−
#define ENABLE_ALTERNATIVE_SENSORTYP+
−
+
−
/* Enable if an external pressure sensor is connected at ADC channel3 (used for sensor verification) */+
−
/* #define ENABLE_EXTERNAL_PRESSURE */+
−
+
−
/* Enable if the menu item predive check shall be available */+
−
/* #define ENABLE_PREDIVE_CHECK */+
−
+
−
/* Enable to have a faster transfer speed between bluetooth module and CPU */+
−
#define ENABLE_FAST_COMM+
−
+
−
/* Enable to have position sensor support active */+
−
/* #define ENABLE_GPIO_V2 */+
−
+
−
/* Enable RTE sleep mode debugging */+
−
/* #define ENABLE_SLEEP_DEBUG */+
−
+
−
+
−
#endif+
−