Remove sensor index for CO2 sensors:
The is only one CO2 sensor supported at a time => no need to use index numbers. This avoids strange indexing (CO3) as well.
line source
/**+ − ******************************************************************************+ − * @file stm32f4xx_hal_tim_ex.h+ − * @author MCD Application Team+ − * @brief Header file of TIM HAL Extension module.+ − ******************************************************************************+ − * @attention+ − *+ − * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>+ − *+ − * Redistribution and use in source and binary forms, with or without modification,+ − * are permitted provided that the following conditions are met:+ − * 1. Redistributions of source code must retain the above copyright notice,+ − * this list of conditions and the following disclaimer.+ − * 2. Redistributions in binary form must reproduce the above copyright notice,+ − * this list of conditions and the following disclaimer in the documentation+ − * and/or other materials provided with the distribution.+ − * 3. Neither the name of STMicroelectronics nor the names of its contributors+ − * may be used to endorse or promote products derived from this software+ − * without specific prior written permission.+ − *+ − * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"+ − * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE+ − * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE+ − * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE+ − * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL+ − * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR+ − * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER+ − * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,+ − * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE+ − * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.+ − *+ − ******************************************************************************+ − */ + − + − /* Define to prevent recursive inclusion -------------------------------------*/+ − #ifndef __STM32F4xx_HAL_TIM_EX_H+ − #define __STM32F4xx_HAL_TIM_EX_H+ − + − #ifdef __cplusplus+ − extern "C" {+ − #endif+ − + − /* Includes ------------------------------------------------------------------*/+ − #include "stm32f4xx_hal_def.h"+ − + − /** @addtogroup STM32F4xx_HAL_Driver+ − * @{+ − */+ − + − /** @addtogroup TIMEx+ − * @{+ − */ + − + − /* Exported types ------------------------------------------------------------*/ + − /** @defgroup TIMEx_Exported_Types TIM Exported Types+ − * @{+ − */+ − + − /** + − * @brief TIM Hall sensor Configuration Structure definition + − */+ − + − typedef struct+ − {+ − + − uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.+ − This parameter can be a value of @ref TIM_Input_Capture_Polarity */+ − + − uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.+ − This parameter can be a value of @ref TIM_Input_Capture_Prescaler */+ − + − uint32_t IC1Filter; /*!< Specifies the input capture filter.+ − This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */+ − + − uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + − This parameter can be a number between Min_Data = 0x0000U and Max_Data = 0xFFFFU */+ − } TIM_HallSensor_InitTypeDef;+ − + − /** + − * @brief TIM Master configuration Structure definition + − */ + − typedef struct {+ − uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection. + − This parameter can be a value of @ref TIM_Master_Mode_Selection */+ − + − uint32_t MasterSlaveMode; /*!< Master/slave mode selection. + − This parameter can be a value of @ref TIM_Master_Slave_Mode */+ − }TIM_MasterConfigTypeDef;+ − + − /** + − * @brief TIM Break and Dead time configuration Structure definition + − */ + − typedef struct+ − {+ − uint32_t OffStateRunMode; /*!< TIM off state in run mode.+ − This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */+ − uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode.+ − This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */+ − uint32_t LockLevel; /*!< TIM Lock level.+ − This parameter can be a value of @ref TIM_Lock_level */ + − uint32_t DeadTime; /*!< TIM dead Time. + − This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */+ − uint32_t BreakState; /*!< TIM Break State. + − This parameter can be a value of @ref TIM_Break_Input_enable_disable */+ − uint32_t BreakPolarity; /*!< TIM Break input polarity. + − This parameter can be a value of @ref TIM_Break_Polarity */+ − uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state. + − This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ + − }TIM_BreakDeadTimeConfigTypeDef;+ − /**+ − * @}+ − */+ − + − /* Exported constants --------------------------------------------------------*/+ − /** @defgroup TIMEx_Exported_Constants TIM Exported Constants+ − * @{+ − */+ − + − /** @defgroup TIMEx_Remap TIM Remap+ − * @{+ − */+ − #define TIM_TIM2_TIM8_TRGO 0x00000000U+ − #define TIM_TIM2_ETH_PTP 0x00000400U+ − #define TIM_TIM2_USBFS_SOF 0x00000800U+ − #define TIM_TIM2_USBHS_SOF 0x00000C00U+ − #define TIM_TIM5_GPIO 0x00000000U+ − #define TIM_TIM5_LSI 0x00000040U+ − #define TIM_TIM5_LSE 0x00000080U+ − #define TIM_TIM5_RTC 0x000000C0U+ − #define TIM_TIM11_GPIO 0x00000000U+ − #define TIM_TIM11_HSE 0x00000002U+ − + − #if defined(STM32F413xx) || defined(STM32F423xx)+ − #define TIM_TIM9_TIM3_TRGO 0x10000000U+ − #define TIM_TIM9_LPTIM 0x10000010U+ − #define TIM_TIM5_TIM3_TRGO 0x10000000U+ − #define TIM_TIM5_LPTIM 0x10000008U+ − #define TIM_TIM1_TIM3_TRGO 0x10000000U+ − #define TIM_TIM1_LPTIM 0x10000004U+ − #endif /* STM32F413xx | STM32F423xx */+ − + − #if defined (STM32F446xx) + − #define TIM_TIM11_SPDIFRX 0x00000001U+ − #endif /* STM32F446xx */+ − /**+ − * @}+ − */+ − + − #if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F413xx) || defined(STM32F423xx)+ − /** @defgroup TIMEx_SystemBreakInput TIM System Break Input+ − * @{+ − */+ − #define TIM_SYSTEMBREAKINPUT_HARDFAULT 0x00000001U /* Core Lockup lock output(Hardfault) is connected to Break Input of TIM1 and TIM8 */+ − #define TIM_SYSTEMBREAKINPUT_PVD 0x00000004U /* PVD Interrupt is connected to Break Input of TIM1 and TIM8 */+ − #define TIM_SYSTEMBREAKINPUT_HARDFAULT_PVD 0x00000005U /* Core Lockup lock output(Hardfault) and PVD Interrupt are connected to Break Input of TIM1 and TIM8 */ + − /**+ − * @}+ − */+ − #endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx || STM32F413xx || STM32F423xx */+ − + − /**+ − * @}+ − */ + − /* Exported macro ------------------------------------------------------------*/+ − /* Exported functions --------------------------------------------------------*/+ − /** @addtogroup TIMEx_Exported_Functions+ − * @{+ − */+ − + − /** @addtogroup TIMEx_Exported_Functions_Group1+ − * @{+ − */+ − /* Timer Hall Sensor functions **********************************************/+ − HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef* htim, TIM_HallSensor_InitTypeDef* sConfig);+ − HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef* htim);+ − + − void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef* htim);+ − void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef* htim);+ − + − /* Blocking mode: Polling */+ − HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef* htim);+ − HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef* htim);+ − /* Non-Blocking mode: Interrupt */+ − HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef* htim);+ − HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef* htim);+ − /* Non-Blocking mode: DMA */+ − HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef* htim, uint32_t *pData, uint16_t Length);+ − HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef* htim);+ − /**+ − * @}+ − */+ − + − /** @addtogroup TIMEx_Exported_Functions_Group2+ − * @{+ − */+ − /* Timer Complementary Output Compare functions *****************************/+ − /* Blocking mode: Polling */+ − HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef* htim, uint32_t Channel);+ − HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel);+ − + − /* Non-Blocking mode: Interrupt */+ − HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel);+ − HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel);+ − + − /* Non-Blocking mode: DMA */+ − HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length);+ − HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel);+ − /**+ − * @}+ − */+ − + − /** @addtogroup TIMEx_Exported_Functions_Group3+ − * @{+ − */+ − /* Timer Complementary PWM functions ****************************************/+ − /* Blocking mode: Polling */+ − HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef* htim, uint32_t Channel);+ − HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel);+ − + − /* Non-Blocking mode: Interrupt */+ − HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel);+ − HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel);+ − /* Non-Blocking mode: DMA */+ − HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length);+ − HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel);+ − /**+ − * @}+ − */+ − + − /** @addtogroup TIMEx_Exported_Functions_Group4+ − * @{+ − */+ − /* Timer Complementary One Pulse functions **********************************/+ − /* Blocking mode: Polling */+ − HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef* htim, uint32_t OutputChannel);+ − HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef* htim, uint32_t OutputChannel);+ − + − /* Non-Blocking mode: Interrupt */+ − HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel);+ − HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel);+ − /**+ − * @}+ − */+ − + − /** @addtogroup TIMEx_Exported_Functions_Group5+ − * @{+ − */+ − /* Extension Control functions ************************************************/+ − HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);+ − HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);+ − HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);+ − HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef* htim, TIM_MasterConfigTypeDef * sMasterConfig);+ − HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef* htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);+ − HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef* htim, uint32_t Remap);+ − /**+ − * @}+ − */+ − + − /** @addtogroup TIMEx_Exported_Functions_Group6+ − * @{+ − */ + − /* Extension Callback *********************************************************/+ − void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef* htim);+ − void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef* htim);+ − void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);+ − /**+ − * @}+ − */+ − + − /** @addtogroup TIMEx_Exported_Functions_Group7+ − * @{+ − */+ − /* Extension Peripheral State functions **************************************/+ − HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef* htim);+ − /**+ − * @}+ − */ + − + − /**+ − * @}+ − */ + − + − /* Private types -------------------------------------------------------------*/+ − /* Private variables ---------------------------------------------------------*/+ − /* Private constants ---------------------------------------------------------*/+ − /* Private macros ------------------------------------------------------------*/+ − /** @defgroup TIMEx_Private_Macros TIM Private Macros+ − * @{+ − */+ − #if defined (STM32F446xx) + − #define IS_TIM_REMAP(TIM_REMAP) (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)||\+ − ((TIM_REMAP) == TIM_TIM2_ETH_PTP)||\+ − ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)||\+ − ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)||\+ − ((TIM_REMAP) == TIM_TIM5_GPIO)||\+ − ((TIM_REMAP) == TIM_TIM5_LSI)||\+ − ((TIM_REMAP) == TIM_TIM5_LSE)||\+ − ((TIM_REMAP) == TIM_TIM5_RTC)||\+ − ((TIM_REMAP) == TIM_TIM11_GPIO)||\+ − ((TIM_REMAP) == TIM_TIM11_SPDIFRX)||\+ − ((TIM_REMAP) == TIM_TIM11_HSE))+ − #elif defined(STM32F413xx) || defined(STM32F423xx)+ − #define IS_TIM_REMAP(TIM_REMAP) (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)||\+ − ((TIM_REMAP) == TIM_TIM2_ETH_PTP)||\+ − ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)||\+ − ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)||\+ − ((TIM_REMAP) == TIM_TIM5_GPIO)||\+ − ((TIM_REMAP) == TIM_TIM5_LSI)||\+ − ((TIM_REMAP) == TIM_TIM5_LSE)||\+ − ((TIM_REMAP) == TIM_TIM5_RTC)||\+ − ((TIM_REMAP) == TIM_TIM11_GPIO)||\+ − ((TIM_REMAP) == TIM_TIM11_HSE)||\+ − ((TIM_REMAP) == TIM_TIM9_TIM3_TRGO)||\+ − ((TIM_REMAP) == TIM_TIM9_LPTIM)||\+ − ((TIM_REMAP) == TIM_TIM5_TIM3_TRGO)||\+ − ((TIM_REMAP) == TIM_TIM5_LPTIM)||\+ − ((TIM_REMAP) == TIM_TIM1_TIM3_TRGO)||\+ − ((TIM_REMAP) == TIM_TIM1_LPTIM))+ − #else+ − #define IS_TIM_REMAP(TIM_REMAP) (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)||\+ − ((TIM_REMAP) == TIM_TIM2_ETH_PTP)||\+ − ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)||\+ − ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)||\+ − ((TIM_REMAP) == TIM_TIM5_GPIO)||\+ − ((TIM_REMAP) == TIM_TIM5_LSI)||\+ − ((TIM_REMAP) == TIM_TIM5_LSE)||\+ − ((TIM_REMAP) == TIM_TIM5_RTC)||\+ − ((TIM_REMAP) == TIM_TIM11_GPIO)||\+ − ((TIM_REMAP) == TIM_TIM11_HSE))+ − #endif /* STM32F446xx */+ − + − #if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F413xx) || defined(STM32F423xx)+ − #define IS_TIM_SYSTEMBREAKINPUT(BREAKINPUT) (((BREAKINPUT) == TIM_SYSTEMBREAKINPUT_HARDFAULT)||\+ − ((BREAKINPUT) == TIM_SYSTEMBREAKINPUT_PVD)||\+ − ((BREAKINPUT) == TIM_SYSTEMBREAKINPUT_HARDFAULT_PVD))+ − + − #endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx || STM32F413xx || STM32F423xx */ + − + − #define IS_TIM_DEADTIME(DEADTIME) ((DEADTIME) <= 0xFFU) + − /**+ − * @}+ − */ + − + − /* Private functions ---------------------------------------------------------*/+ − /** @defgroup TIMEx_Private_Functions TIM Private Functions+ − * @{+ − */+ − + − /**+ − * @}+ − */+ − + − /**+ − * @}+ − */ + − + − /**+ − * @}+ − */+ − + − #ifdef __cplusplus+ − }+ − #endif+ − + − #endif /* __STM32F4xx_HAL_TIM_EX_H */+ − + − /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/+ −
