Remove sensor index for CO2 sensors:
The is only one CO2 sensor supported at a time => no need to use index numbers. This avoids strange indexing (CO3) as well.
line source
/**+ − ******************************************************************************+ − * @file stm32f4xx_hal_cryp.h+ − * @author MCD Application Team+ − * @brief Header file of CRYP HAL module.+ − ******************************************************************************+ − * @attention+ − *+ − * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>+ − *+ − * Redistribution and use in source and binary forms, with or without modification,+ − * are permitted provided that the following conditions are met:+ − * 1. Redistributions of source code must retain the above copyright notice,+ − * this list of conditions and the following disclaimer.+ − * 2. Redistributions in binary form must reproduce the above copyright notice,+ − * this list of conditions and the following disclaimer in the documentation+ − * and/or other materials provided with the distribution.+ − * 3. Neither the name of STMicroelectronics nor the names of its contributors+ − * may be used to endorse or promote products derived from this software+ − * without specific prior written permission.+ − *+ − * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"+ − * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE+ − * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE+ − * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE+ − * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL+ − * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR+ − * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER+ − * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,+ − * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE+ − * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.+ − *+ − ******************************************************************************+ − */ + − + − /* Define to prevent recursive inclusion -------------------------------------*/+ − #ifndef __STM32F4xx_HAL_CRYP_H+ − #define __STM32F4xx_HAL_CRYP_H+ − + − #ifdef __cplusplus+ − extern "C" {+ − #endif+ − + − /* Includes ------------------------------------------------------------------*/+ − #include "stm32f4xx_hal_def.h"+ − + − + − #if defined(CRYP)+ − + − /** @addtogroup STM32F4xx_HAL_Driver+ − * @{+ − */+ − + − /** @addtogroup CRYP+ − * @{+ − */+ − + − /* Exported types ------------------------------------------------------------*/+ − + − /** @defgroup CRYP_Exported_Types CRYP Exported Types+ − * @{+ − */+ − + − /** @defgroup CRYP_Exported_Types_Group1 CRYP Configuration Structure definition+ − * @{+ − */+ − + − typedef struct+ − {+ − uint32_t DataType; /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string.+ − This parameter can be a value of @ref CRYP_Data_Type */+ − + − uint32_t KeySize; /*!< Used only in AES mode only : 128, 192 or 256 bit key length. + − This parameter can be a value of @ref CRYP_Key_Size */+ − + − uint8_t* pKey; /*!< The key used for encryption/decryption */+ − + − uint8_t* pInitVect; /*!< The initialization vector used also as initialization+ − counter in CTR mode */+ − + − uint8_t IVSize; /*!< The size of initialization vector. + − This parameter (called nonce size in CCM) is used only + − in AES-128/192/256 encryption/decryption CCM mode */+ − + − uint8_t TagSize; /*!< The size of returned authentication TAG. + − This parameter is used only in AES-128/192/256 + − encryption/decryption CCM mode */+ − + − uint8_t* Header; /*!< The header used in GCM and CCM modes */+ − + − uint32_t HeaderSize; /*!< The size of header buffer in bytes */+ − + − uint8_t* pScratch; /*!< Scratch buffer used to append the header. It's size must be equal to header size + 21 bytes.+ − This parameter is used only in AES-128/192/256 encryption/decryption CCM mode */+ − }CRYP_InitTypeDef;+ − + − /** + − * @}+ − */+ − + − /** @defgroup CRYP_Exported_Types_Group2 CRYP State structures definition+ − * @{+ − */+ − + − + − typedef enum+ − {+ − HAL_CRYP_STATE_RESET = 0x00U, /*!< CRYP not yet initialized or disabled */+ − HAL_CRYP_STATE_READY = 0x01U, /*!< CRYP initialized and ready for use */+ − HAL_CRYP_STATE_BUSY = 0x02U, /*!< CRYP internal processing is ongoing */+ − HAL_CRYP_STATE_TIMEOUT = 0x03U, /*!< CRYP timeout state */+ − HAL_CRYP_STATE_ERROR = 0x04U /*!< CRYP error state */+ − }HAL_CRYP_STATETypeDef;+ − + − /** + − * @}+ − */+ − + − /** @defgroup CRYP_Exported_Types_Group3 CRYP phase structures definition+ − * @{+ − */+ − + − + − typedef enum+ − {+ − HAL_CRYP_PHASE_READY = 0x01U, /*!< CRYP peripheral is ready for initialization. */+ − HAL_CRYP_PHASE_PROCESS = 0x02U, /*!< CRYP peripheral is in processing phase */+ − HAL_CRYP_PHASE_FINAL = 0x03U /*!< CRYP peripheral is in final phase+ − This is relevant only with CCM and GCM modes */+ − }HAL_PhaseTypeDef;+ − + − /** + − * @}+ − */+ − + − /** @defgroup CRYP_Exported_Types_Group4 CRYP handle Structure definition+ − * @{+ − */+ − + − typedef struct+ − {+ − CRYP_TypeDef *Instance; /*!< CRYP registers base address */+ − + − CRYP_InitTypeDef Init; /*!< CRYP required parameters */+ − + − uint8_t *pCrypInBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */+ − + − uint8_t *pCrypOutBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */+ − + − __IO uint16_t CrypInCount; /*!< Counter of inputed data */+ − + − __IO uint16_t CrypOutCount; /*!< Counter of output data */+ − + − HAL_StatusTypeDef Status; /*!< CRYP peripheral status */+ − + − HAL_PhaseTypeDef Phase; /*!< CRYP peripheral phase */+ − + − DMA_HandleTypeDef *hdmain; /*!< CRYP In DMA handle parameters */+ − + − DMA_HandleTypeDef *hdmaout; /*!< CRYP Out DMA handle parameters */+ − + − HAL_LockTypeDef Lock; /*!< CRYP locking object */+ − + − __IO HAL_CRYP_STATETypeDef State; /*!< CRYP peripheral state */+ − }CRYP_HandleTypeDef;+ − + − /** + − * @}+ − */+ − + − /** + − * @}+ − */+ − + − /* Exported constants --------------------------------------------------------*/+ − /** @defgroup CRYP_Exported_Constants CRYP Exported Constants+ − * @{+ − */+ − + − /** @defgroup CRYP_Key_Size CRYP Key Size+ − * @{+ − */+ − #define CRYP_KEYSIZE_128B 0x00000000U+ − #define CRYP_KEYSIZE_192B CRYP_CR_KEYSIZE_0+ − #define CRYP_KEYSIZE_256B CRYP_CR_KEYSIZE_1+ − /**+ − * @}+ − */+ − + − /** @defgroup CRYP_Data_Type CRYP Data Type+ − * @{+ − */+ − #define CRYP_DATATYPE_32B 0x00000000U+ − #define CRYP_DATATYPE_16B CRYP_CR_DATATYPE_0+ − #define CRYP_DATATYPE_8B CRYP_CR_DATATYPE_1+ − #define CRYP_DATATYPE_1B CRYP_CR_DATATYPE+ − /**+ − * @}+ − */+ − + − /** @defgroup CRYP_Exported_Constants_Group3 CRYP CRYP_AlgoModeDirection+ − * @{+ − */+ − #define CRYP_CR_ALGOMODE_DIRECTION 0x0008003CU+ − #define CRYP_CR_ALGOMODE_TDES_ECB_ENCRYPT 0x00000000U+ − #define CRYP_CR_ALGOMODE_TDES_ECB_DECRYPT 0x00000004U+ − #define CRYP_CR_ALGOMODE_TDES_CBC_ENCRYPT 0x00000008U+ − #define CRYP_CR_ALGOMODE_TDES_CBC_DECRYPT 0x0000000CU+ − #define CRYP_CR_ALGOMODE_DES_ECB_ENCRYPT 0x00000010U+ − #define CRYP_CR_ALGOMODE_DES_ECB_DECRYPT 0x00000014U+ − #define CRYP_CR_ALGOMODE_DES_CBC_ENCRYPT 0x00000018U+ − #define CRYP_CR_ALGOMODE_DES_CBC_DECRYPT 0x0000001CU+ − #define CRYP_CR_ALGOMODE_AES_ECB_ENCRYPT 0x00000020U+ − #define CRYP_CR_ALGOMODE_AES_ECB_DECRYPT 0x00000024U+ − #define CRYP_CR_ALGOMODE_AES_CBC_ENCRYPT 0x00000028U+ − #define CRYP_CR_ALGOMODE_AES_CBC_DECRYPT 0x0000002CU+ − #define CRYP_CR_ALGOMODE_AES_CTR_ENCRYPT 0x00000030U+ − #define CRYP_CR_ALGOMODE_AES_CTR_DECRYPT 0x00000034U+ − /**+ − * @}+ − */+ − + − /** @defgroup CRYP_Exported_Constants_Group4 CRYP CRYP_Interrupt+ − * @{+ − */+ − #define CRYP_IT_INI ((uint32_t)CRYP_IMSCR_INIM) /*!< Input FIFO Interrupt */+ − #define CRYP_IT_OUTI ((uint32_t)CRYP_IMSCR_OUTIM) /*!< Output FIFO Interrupt */+ − /**+ − * @}+ − */+ − + − /** @defgroup CRYP_Exported_Constants_Group5 CRYP CRYP_Flags+ − * @{+ − */+ − #define CRYP_FLAG_BUSY 0x00000010U /*!< The CRYP core is currently + − processing a block of data + − or a key preparation (for + − AES decryption). */+ − #define CRYP_FLAG_IFEM 0x00000001U /*!< Input FIFO is empty */+ − #define CRYP_FLAG_IFNF 0x00000002U /*!< Input FIFO is not Full */+ − #define CRYP_FLAG_OFNE 0x00000004U /*!< Output FIFO is not empty */+ − #define CRYP_FLAG_OFFU 0x00000008U /*!< Output FIFO is Full */+ − #define CRYP_FLAG_OUTRIS 0x01000002U /*!< Output FIFO service raw + − interrupt status */+ − #define CRYP_FLAG_INRIS 0x01000001U /*!< Input FIFO service raw + − interrupt status */+ − /**+ − * @}+ − */+ − + − /**+ − * @}+ − */+ − + − /* Exported macro ------------------------------------------------------------*/+ − /** @defgroup CRYP_Exported_Macros CRYP Exported Macros+ − * @{+ − */+ − + − /** @brief Reset CRYP handle state+ − * @param __HANDLE__ specifies the CRYP handle.+ − * @retval None+ − */+ − #define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRYP_STATE_RESET)+ − + − /**+ − * @brief Enable/Disable the CRYP peripheral.+ − * @param __HANDLE__ specifies the CRYP handle.+ − * @retval None+ − */+ − #define __HAL_CRYP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRYP_CR_CRYPEN)+ − #define __HAL_CRYP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~CRYP_CR_CRYPEN)+ − + − /**+ − * @brief Flush the data FIFO.+ − * @param __HANDLE__ specifies the CRYP handle.+ − * @retval None+ − */+ − #define __HAL_CRYP_FIFO_FLUSH(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRYP_CR_FFLUSH)+ − + − /**+ − * @brief Set the algorithm mode: AES-ECB, AES-CBC, AES-CTR, DES-ECB, DES-CBC.+ − * @param __HANDLE__ specifies the CRYP handle.+ − * @param MODE The algorithm mode.+ − * @retval None+ − */+ − #define __HAL_CRYP_SET_MODE(__HANDLE__, MODE) ((__HANDLE__)->Instance->CR |= (uint32_t)(MODE))+ − + − /** @brief Check whether the specified CRYP flag is set or not.+ − * @param __HANDLE__ specifies the CRYP handle.+ − * @param __FLAG__ specifies the flag to check.+ − * This parameter can be one of the following values:+ − * @arg CRYP_FLAG_BUSY: The CRYP core is currently processing a block of data + − * or a key preparation (for AES decryption). + − * @arg CRYP_FLAG_IFEM: Input FIFO is empty+ − * @arg CRYP_FLAG_IFNF: Input FIFO is not full+ − * @arg CRYP_FLAG_INRIS: Input FIFO service raw interrupt is pending+ − * @arg CRYP_FLAG_OFNE: Output FIFO is not empty+ − * @arg CRYP_FLAG_OFFU: Output FIFO is full+ − * @arg CRYP_FLAG_OUTRIS: Input FIFO service raw interrupt is pending+ − * @retval The new state of __FLAG__ (TRUE or FALSE).+ − */+ − + − #define __HAL_CRYP_GET_FLAG(__HANDLE__, __FLAG__) ((((uint8_t)((__FLAG__) >> 24U)) == 0x01U)?((((__HANDLE__)->Instance->RISR) & ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK)): \+ − ((((__HANDLE__)->Instance->RISR) & ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK)))+ − + − /** @brief Check whether the specified CRYP interrupt is set or not.+ − * @param __HANDLE__ specifies the CRYP handle.+ − * @param __INTERRUPT__ specifies the interrupt to check.+ − * This parameter can be one of the following values:+ − * @arg CRYP_IT_INRIS: Input FIFO service raw interrupt is pending+ − * @arg CRYP_IT_OUTRIS: Output FIFO service raw interrupt is pending+ − * @retval The new state of __INTERRUPT__ (TRUE or FALSE).+ − */+ − #define __HAL_CRYP_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->MISR & (__INTERRUPT__)) == (__INTERRUPT__))+ − + − /**+ − * @brief Enable the CRYP interrupt.+ − * @param __HANDLE__ specifies the CRYP handle.+ − * @param __INTERRUPT__ CRYP Interrupt.+ − * @retval None+ − */+ − #define __HAL_CRYP_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IMSCR) |= (__INTERRUPT__))+ − + − /**+ − * @brief Disable the CRYP interrupt.+ − * @param __HANDLE__ specifies the CRYP handle.+ − * @param __INTERRUPT__ CRYP interrupt.+ − * @retval None+ − */+ − #define __HAL_CRYP_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IMSCR) &= ~(__INTERRUPT__))+ − + − /**+ − * @}+ − */ + − + − /* Include CRYP HAL Extension module */+ − #include "stm32f4xx_hal_cryp_ex.h"+ − + − /* Exported functions --------------------------------------------------------*/+ − /** @defgroup CRYP_Exported_Functions CRYP Exported Functions+ − * @{+ − */+ − + − /** @addtogroup CRYP_Exported_Functions_Group1+ − * @{+ − */ + − HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp);+ − HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp);+ − void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp);+ − void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp);+ − /**+ − * @}+ − */ + − + − /** @addtogroup CRYP_Exported_Functions_Group2+ − * @{+ − */ + − /* AES encryption/decryption using polling ***********************************/+ − HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);+ − HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);+ − HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);+ − HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);+ − HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);+ − HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);+ − + − /* AES encryption/decryption using interrupt *********************************/+ − HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);+ − HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);+ − HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);+ − HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);+ − HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);+ − HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);+ − + − /* AES encryption/decryption using DMA ***************************************/+ − HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);+ − HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);+ − HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);+ − HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);+ − HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);+ − HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);+ − /**+ − * @}+ − */ + − + − /** @addtogroup CRYP_Exported_Functions_Group3+ − * @{+ − */ + − /* DES encryption/decryption using polling ***********************************/+ − HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);+ − HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);+ − HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);+ − HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);+ − + − /* DES encryption/decryption using interrupt *********************************/+ − HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);+ − HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);+ − HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);+ − HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);+ − + − /* DES encryption/decryption using DMA ***************************************/+ − HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);+ − HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);+ − HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);+ − HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);+ − /**+ − * @}+ − */ + − + − /** @addtogroup CRYP_Exported_Functions_Group4+ − * @{+ − */ + − /* TDES encryption/decryption using polling **********************************/+ − HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);+ − HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);+ − HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);+ − HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);+ − + − /* TDES encryption/decryption using interrupt ********************************/+ − HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);+ − HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);+ − HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);+ − HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);+ − + − /* TDES encryption/decryption using DMA **************************************/+ − HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);+ − HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);+ − HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);+ − HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);+ − /**+ − * @}+ − */ + − + − /** @addtogroup CRYP_Exported_Functions_Group5+ − * @{+ − */ + − void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp);+ − void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp);+ − void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp);+ − /**+ − * @}+ − */ + − + − /** @addtogroup CRYP_Exported_Functions_Group6+ − * @{+ − */ + − void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp);+ − /**+ − * @}+ − */ + − + − /** @addtogroup CRYP_Exported_Functions_Group7+ − * @{+ − */ + − HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp);+ − /**+ − * @}+ − */ + − + − /**+ − * @}+ − */+ − + − /* Private types -------------------------------------------------------------*/+ − /** @defgroup CRYP_Private_Types CRYP Private Types+ − * @{+ − */+ − + − /**+ − * @}+ − */ + − + − /* Private variables ---------------------------------------------------------*/+ − /** @defgroup CRYP_Private_Variables CRYP Private Variables+ − * @{+ − */+ − + − /**+ − * @}+ − */ + − + − /* Private constants ---------------------------------------------------------*/+ − /** @defgroup CRYP_Private_Constants CRYP Private Constants+ − * @{+ − */+ − #define CRYP_FLAG_MASK 0x0000001FU+ − /**+ − * @}+ − */ + − + − /* Private macros ------------------------------------------------------------*/+ − /** @defgroup CRYP_Private_Macros CRYP Private Macros+ − * @{+ − */+ − + − #define IS_CRYP_KEYSIZE(__KEYSIZE__) (((__KEYSIZE__) == CRYP_KEYSIZE_128B) || \+ − ((__KEYSIZE__) == CRYP_KEYSIZE_192B) || \+ − ((__KEYSIZE__) == CRYP_KEYSIZE_256B))+ − + − + − #define IS_CRYP_DATATYPE(__DATATYPE__) (((__DATATYPE__) == CRYP_DATATYPE_32B) || \+ − ((__DATATYPE__) == CRYP_DATATYPE_16B) || \+ − ((__DATATYPE__) == CRYP_DATATYPE_8B) || \+ − ((__DATATYPE__) == CRYP_DATATYPE_1B)) + − + − + − /**+ − * @}+ − */ + − + − /* Private functions ---------------------------------------------------------*/+ − /** @defgroup CRYP_Private_Functions CRYP Private Functions+ − * @{+ − */+ − + − /**+ − * @}+ − */+ − + − #endif /* CRYP */+ − + − #if defined (AES)+ − + − /** @addtogroup STM32F4xx_HAL_Driver+ − * @{+ − */+ − + − /** @addtogroup CRYP+ − * @{+ − */+ − + − /* Exported types ------------------------------------------------------------*/+ − /** @defgroup CRYP_Exported_Types CRYP Exported Types+ − * @{+ − */+ − + − /** + − * @brief CRYP Configuration Structure definition+ − */+ − typedef struct+ − {+ − uint32_t DataType; /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string.+ − This parameter can be a value of @ref CRYP_Data_Type */+ − + − uint32_t KeySize; /*!< 128 or 256-bit key length. + − This parameter can be a value of @ref CRYP_Key_Size */+ − + − uint32_t OperatingMode; /*!< AES operating mode. + − This parameter can be a value of @ref CRYP_AES_OperatingMode */+ − + − uint32_t ChainingMode; /*!< AES chaining mode. + − This parameter can be a value of @ref CRYP_AES_ChainingMode */+ − + − uint32_t KeyWriteFlag; /*!< Allows to bypass or not key write-up before decryption. + − This parameter can be a value of @ref CRYP_Key_Write */ + − + − uint32_t GCMCMACPhase; /*!< Indicates the processing phase of the Galois Counter Mode (GCM), + − Galois Message Authentication Code (GMAC) or Cipher Message + − Authentication Code (CMAC) or Counter with Cipher Mode (CCM) when+ − the latter is applicable.+ − This parameter can be a value of @ref CRYP_GCM_CMAC_Phase */ + − + − uint8_t* pKey; /*!< Encryption/Decryption Key */+ − + − uint8_t* pInitVect; /*!< Initialization Vector used for CTR, CBC, GCM/GMAC, CMAC, + − (and CCM when applicable) modes */+ − + − uint8_t* Header; /*!< Header used in GCM/GMAC, CMAC (and CCM when applicable) modes */+ − + − uint64_t HeaderSize; /*!< Header size in bytes */+ − + − }CRYP_InitTypeDef;+ − + − /** + − * @brief HAL CRYP State structures definition+ − */+ − typedef enum+ − {+ − HAL_CRYP_STATE_RESET = 0x00U, /*!< CRYP not yet initialized or disabled */+ − HAL_CRYP_STATE_READY = 0x01U, /*!< CRYP initialized and ready for use */+ − HAL_CRYP_STATE_BUSY = 0x02U, /*!< CRYP internal processing is ongoing */+ − HAL_CRYP_STATE_TIMEOUT = 0x03U, /*!< CRYP timeout state */+ − HAL_CRYP_STATE_ERROR = 0x04U, /*!< CRYP error state */+ − HAL_CRYP_STATE_SUSPENDED = 0x05U /*!< CRYP suspended */+ − }HAL_CRYP_STATETypeDef;+ − + − /** + − * @brief HAL CRYP phase structures definition+ − */+ − typedef enum+ − {+ − HAL_CRYP_PHASE_READY = 0x01U, /*!< CRYP peripheral is ready for initialization. */+ − HAL_CRYP_PHASE_PROCESS = 0x02U, /*!< CRYP peripheral is in processing phase */+ − HAL_CRYP_PHASE_START = 0x03U, /*!< CRYP peripheral has been initialized but + − GCM/GMAC/CMAC(/CCM) initialization phase has not started */+ − HAL_CRYP_PHASE_INIT_OVER = 0x04U, /*!< GCM/GMAC/CMAC(/CCM) init phase has been carried out */ + − HAL_CRYP_PHASE_HEADER_OVER = 0x05U, /*!< GCM/GMAC/CMAC(/CCM) header phase has been carried out */ + − HAL_CRYP_PHASE_PAYLOAD_OVER = 0x06U, /*!< GCM(/CCM) payload phase has been carried out */ + − HAL_CRYP_PHASE_FINAL_OVER = 0x07U, /*!< GCM/GMAC/CMAC(/CCM) final phase has been carried out */+ − HAL_CRYP_PHASE_HEADER_SUSPENDED = 0x08U, /*!< GCM/GMAC/CMAC(/CCM) header phase has been suspended */+ − HAL_CRYP_PHASE_PAYLOAD_SUSPENDED = 0x09U, /*!< GCM(/CCM) payload phase has been suspended */ + − HAL_CRYP_PHASE_NOT_USED = 0x0AU /*!< Phase is irrelevant to the current chaining mode */ + − }HAL_PhaseTypeDef;+ − + − /** + − * @brief HAL CRYP mode suspend definitions+ − */+ − typedef enum+ − {+ − HAL_CRYP_SUSPEND_NONE = 0x00U, /*!< CRYP peripheral suspension not requested */+ − HAL_CRYP_SUSPEND = 0x01U /*!< CRYP peripheral suspension requested */ + − }HAL_SuspendTypeDef;+ − + − + − /** + − * @brief HAL CRYP Error Codes definition + − */ + − #define HAL_CRYP_ERROR_NONE 0x00000000U /*!< No error */+ − #define HAL_CRYP_WRITE_ERROR 0x00000001U /*!< Write error */+ − #define HAL_CRYP_READ_ERROR 0x00000002U /*!< Read error */+ − #define HAL_CRYP_DMA_ERROR 0x00000004U /*!< DMA error */ + − #define HAL_CRYP_BUSY_ERROR 0x00000008U /*!< Busy flag error */ + − + − /** + − * @brief CRYP handle Structure definition+ − */ + − typedef struct+ − {+ − AES_TypeDef *Instance; /*!< Register base address */+ − + − CRYP_InitTypeDef Init; /*!< CRYP initialization parameters */+ − + − uint8_t *pCrypInBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) input buffer */+ − + − uint8_t *pCrypOutBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) output buffer */+ − + − uint32_t CrypInCount; /*!< Input data size in bytes or, after suspension, the remaining + − number of bytes to process */+ − + − uint32_t CrypOutCount; /*!< Output data size in bytes */+ − + − HAL_PhaseTypeDef Phase; /*!< CRYP peripheral processing phase for GCM, GMAC, CMAC + − (or CCM when applicable) modes.+ − Indicates the last phase carried out to ease+ − phase transitions */+ − + − DMA_HandleTypeDef *hdmain; /*!< CRYP peripheral Input DMA handle parameters */+ − + − DMA_HandleTypeDef *hdmaout; /*!< CRYP peripheral Output DMA handle parameters */+ − + − HAL_LockTypeDef Lock; /*!< CRYP locking object */+ − + − __IO HAL_CRYP_STATETypeDef State; /*!< CRYP peripheral state */+ − + − __IO uint32_t ErrorCode; /*!< CRYP peripheral error code */+ − + − HAL_SuspendTypeDef SuspendRequest; /*!< CRYP peripheral suspension request flag */ + − }CRYP_HandleTypeDef;+ − + − /** + − * @}+ − */+ − + − + − /* Exported constants --------------------------------------------------------*/+ − /** @defgroup CRYP_Exported_Constants CRYP Exported Constants+ − * @{+ − */+ − + − /** @defgroup CRYP_Key_Size Key size selection+ − * @{+ − */+ − #define CRYP_KEYSIZE_128B 0x00000000U /*!< 128-bit long key */ + − #define CRYP_KEYSIZE_256B AES_CR_KEYSIZE /*!< 256-bit long key */ + − /**+ − * @}+ − */+ − + − /** @defgroup CRYP_Data_Type AES Data Type selection+ − * @{+ − */+ − #define CRYP_DATATYPE_32B 0x00000000U /*!< 32-bit data type (no swapping) */+ − #define CRYP_DATATYPE_16B AES_CR_DATATYPE_0 /*!< 16-bit data type (half-word swapping) */+ − #define CRYP_DATATYPE_8B AES_CR_DATATYPE_1 /*!< 8-bit data type (byte swapping) */+ − #define CRYP_DATATYPE_1B AES_CR_DATATYPE /*!< 1-bit data type (bit swapping) */+ − /**+ − * @}+ − */+ − + − /** @defgroup CRYP_AES_State AES Enable state+ − * @{+ − */ + − #define CRYP_AES_DISABLE 0x00000000U /*!< Disable AES */+ − #define CRYP_AES_ENABLE AES_CR_EN /*!< Enable AES */+ − /**+ − * @}+ − */ + − + − /** @defgroup CRYP_AES_OperatingMode AES operating mode+ − * @{+ − */ + − #define CRYP_ALGOMODE_ENCRYPT 0x00000000U /*!< Encryption mode */+ − #define CRYP_ALGOMODE_KEYDERIVATION AES_CR_MODE_0 /*!< Key derivation mode */+ − #define CRYP_ALGOMODE_DECRYPT AES_CR_MODE_1 /*!< Decryption */+ − #define CRYP_ALGOMODE_KEYDERIVATION_DECRYPT AES_CR_MODE /*!< Key derivation and decryption */+ − #define CRYP_ALGOMODE_TAG_GENERATION 0x00000000U /*!< GMAC or CMAC authentication tag generation */+ − /**+ − * @}+ − */ + − + − /** @defgroup CRYP_AES_ChainingMode AES chaining mode+ − * @{+ − */+ − #define CRYP_CHAINMODE_AES_ECB 0x00000000U /*!< Electronic codebook chaining algorithm */+ − #define CRYP_CHAINMODE_AES_CBC AES_CR_CHMOD_0 /*!< Cipher block chaining algorithm */+ − #define CRYP_CHAINMODE_AES_CTR AES_CR_CHMOD_1 /*!< Counter mode chaining algorithm */+ − #define CRYP_CHAINMODE_AES_GCM_GMAC (AES_CR_CHMOD_0 | AES_CR_CHMOD_1) /*!< Galois counter mode - Galois message authentication code */+ − #define CRYP_CHAINMODE_AES_CMAC AES_CR_CHMOD_2 /*!< Cipher message authentication code */+ − #if defined(AES_CR_NPBLB)+ − #define CRYP_CHAINMODE_AES_CCM_CMAC AES_CR_CHMOD_2 /*!< Counter with Cipher Mode - Cipher message authentication code */ + − #endif+ − /** + − * @}+ − */+ − + − /** @defgroup CRYP_Key_Write AES decryption key write-up flag+ − * @{+ − */ + − #define CRYP_KEY_WRITE_ENABLE 0x00000000U /*!< Enable decryption key writing */ + − #define CRYP_KEY_WRITE_DISABLE 0x00000001U /*!< Disable decryption key writing */ + − /**+ − * @}+ − */ + − + − /** @defgroup CRYP_DMAIN DMA Input phase management enable state+ − * @{+ − */+ − #define CRYP_DMAIN_DISABLE 0x00000000U /*!< Disable DMA Input phase management */+ − #define CRYP_DMAIN_ENABLE AES_CR_DMAINEN /*!< Enable DMA Input phase management */+ − /**+ − * @}+ − */+ − + − /** @defgroup CRYP_DMAOUT DMA Output phase management enable state+ − * @{+ − */+ − #define CRYP_DMAOUT_DISABLE 0x00000000U /*!< Disable DMA Output phase management */+ − #define CRYP_DMAOUT_ENABLE AES_CR_DMAOUTEN /*!< Enable DMA Output phase management */+ − /**+ − * @}+ − */ + − + − + − /** @defgroup CRYP_GCM_CMAC_Phase GCM/GMAC and CMAC processing phase selection+ − * @{+ − */+ − #define CRYP_GCM_INIT_PHASE 0x00000000U /*!< GCM/GMAC (or CCM) init phase */ + − #define CRYP_GCMCMAC_HEADER_PHASE AES_CR_GCMPH_0 /*!< GCM/GMAC or (CCM/)CMAC header phase */ + − #define CRYP_GCM_PAYLOAD_PHASE AES_CR_GCMPH_1 /*!< GCM(/CCM) payload phase */ + − #define CRYP_GCMCMAC_FINAL_PHASE AES_CR_GCMPH /*!< GCM/GMAC or (CCM/)CMAC final phase */ + − /* Definitions duplication for code readibility's sake: + − supported or not supported chain modes are not specified for each phase */+ − #define CRYP_INIT_PHASE 0x00000000U /*!< Init phase */ + − #define CRYP_HEADER_PHASE AES_CR_GCMPH_0 /*!< Header phase */ + − #define CRYP_PAYLOAD_PHASE AES_CR_GCMPH_1 /*!< Payload phase */ + − #define CRYP_FINAL_PHASE AES_CR_GCMPH /*!< Final phase */ + − /**+ − * @}+ − */+ − + − /** @defgroup CRYP_Flags AES status flags+ − * @{+ − */+ − + − #define CRYP_FLAG_BUSY AES_SR_BUSY /*!< GCM process suspension forbidden */+ − #define CRYP_FLAG_WRERR AES_SR_WRERR /*!< Write Error */+ − #define CRYP_FLAG_RDERR AES_SR_RDERR /*!< Read error */+ − #define CRYP_FLAG_CCF AES_SR_CCF /*!< Computation completed */+ − /**+ − * @}+ − */+ − + − /** @defgroup CRYP_Clear_Flags AES clearing flags+ − * @{+ − */+ − + − #define CRYP_CCF_CLEAR AES_CR_CCFC /*!< Computation Complete Flag Clear */+ − #define CRYP_ERR_CLEAR AES_CR_ERRC /*!< Error Flag Clear */+ − /**+ − * @}+ − */+ − + − /** @defgroup AES_Interrupts_Enable AES Interrupts Enable bits+ − * @{+ − */ + − #define CRYP_IT_CCFIE AES_CR_CCFIE /*!< Computation Complete interrupt enable */+ − #define CRYP_IT_ERRIE AES_CR_ERRIE /*!< Error interrupt enable */+ − /**+ − * @}+ − */+ − + − /** @defgroup CRYP_Interrupts_Flags AES Interrupts flags+ − * @{+ − */+ − #define CRYP_IT_WRERR AES_SR_WRERR /*!< Write Error */+ − #define CRYP_IT_RDERR AES_SR_RDERR /*!< Read Error */+ − #define CRYP_IT_CCF AES_SR_CCF /*!< Computation completed */+ − /**+ − * @}+ − */+ − + − /**+ − * @}+ − */+ − + − /* Exported macros -----------------------------------------------------------*/+ − /** @defgroup CRYP_Exported_Macros CRYP Exported Macros+ − * @{+ − */+ − + − /** @brief Reset CRYP handle state.+ − * @param __HANDLE__ specifies the CRYP handle.+ − * @retval None+ − */+ − #define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRYP_STATE_RESET)+ − + − /**+ − * @brief Enable the CRYP AES peripheral.+ − * @retval None+ − */+ − #define __HAL_CRYP_ENABLE() (AES->CR |= AES_CR_EN)+ − + − /**+ − * @brief Disable the CRYP AES peripheral.+ − * @retval None+ − */+ − #define __HAL_CRYP_DISABLE() (AES->CR &= ~AES_CR_EN)+ − + − /**+ − * @brief Set the algorithm operating mode.+ − * @param __OPERATING_MODE__ specifies the operating mode+ − * This parameter can be one of the following values:+ − * @arg @ref CRYP_ALGOMODE_ENCRYPT encryption + − * @arg @ref CRYP_ALGOMODE_KEYDERIVATION key derivation + − * @arg @ref CRYP_ALGOMODE_DECRYPT decryption + − * @arg @ref CRYP_ALGOMODE_KEYDERIVATION_DECRYPT key derivation and decryption + − * @retval None+ − */+ − #define __HAL_CRYP_SET_OPERATINGMODE(__OPERATING_MODE__) MODIFY_REG(AES->CR, AES_CR_MODE, (__OPERATING_MODE__)) + − + − + − /**+ − * @brief Set the algorithm chaining mode.+ − * @param __CHAINING_MODE__ specifies the chaining mode+ − * This parameter can be one of the following values:+ − * @arg @ref CRYP_CHAINMODE_AES_ECB Electronic CodeBook + − * @arg @ref CRYP_CHAINMODE_AES_CBC Cipher Block Chaining + − * @arg @ref CRYP_CHAINMODE_AES_CTR CounTeR mode+ − * @arg @ref CRYP_CHAINMODE_AES_GCM_GMAC Galois Counter Mode or Galois Message Authentication Code + − * @arg @ref CRYP_CHAINMODE_AES_CMAC Cipher Message Authentication Code (or Counter with Cipher Mode when applicable)+ − * @retval None+ − */+ − #define __HAL_CRYP_SET_CHAININGMODE(__CHAINING_MODE__) MODIFY_REG(AES->CR, AES_CR_CHMOD, (__CHAINING_MODE__)) + − + − + − + − /** @brief Check whether the specified CRYP status flag is set or not.+ − * @param __FLAG__ specifies the flag to check.+ − * This parameter can be one of the following values:+ − * @arg @ref CRYP_FLAG_BUSY GCM process suspension forbidden + − * @arg @ref CRYP_IT_WRERR Write Error + − * @arg @ref CRYP_IT_RDERR Read Error + − * @arg @ref CRYP_IT_CCF Computation Complete + − * @retval The state of __FLAG__ (TRUE or FALSE).+ − */+ − #define __HAL_CRYP_GET_FLAG(__FLAG__) ((AES->SR & (__FLAG__)) == (__FLAG__))+ − + − + − /** @brief Clear the CRYP pending status flag.+ − * @param __FLAG__ specifies the flag to clear.+ − * This parameter can be one of the following values:+ − * @arg @ref CRYP_ERR_CLEAR Read (RDERR) or Write Error (WRERR) Flag Clear+ − * @arg @ref CRYP_CCF_CLEAR Computation Complete Flag (CCF) Clear + − * @retval None+ − */+ − #define __HAL_CRYP_CLEAR_FLAG(__FLAG__) SET_BIT(AES->CR, (__FLAG__))+ − + − + − + − /** @brief Check whether the specified CRYP interrupt source is enabled or not.+ − * @param __INTERRUPT__ CRYP interrupt source to check+ − * This parameter can be one of the following values:+ − * @arg @ref CRYP_IT_ERRIE Error interrupt (used for RDERR and WRERR)+ − * @arg @ref CRYP_IT_CCFIE Computation Complete interrupt + − * @retval State of interruption (TRUE or FALSE).+ − */+ − #define __HAL_CRYP_GET_IT_SOURCE(__INTERRUPT__) ((AES->CR & (__INTERRUPT__)) == (__INTERRUPT__))+ − + − + − /** @brief Check whether the specified CRYP interrupt is set or not.+ − * @param __INTERRUPT__ specifies the interrupt to check.+ − * This parameter can be one of the following values:+ − * @arg @ref CRYP_IT_WRERR Write Error + − * @arg @ref CRYP_IT_RDERR Read Error + − * @arg @ref CRYP_IT_CCF Computation Complete + − * @retval The state of __INTERRUPT__ (TRUE or FALSE).+ − */+ − #define __HAL_CRYP_GET_IT(__INTERRUPT__) ((AES->SR & (__INTERRUPT__)) == (__INTERRUPT__))+ − + − + − + − /** @brief Clear the CRYP pending interrupt.+ − * @param __INTERRUPT__ specifies the IT to clear.+ − * This parameter can be one of the following values:+ − * @arg @ref CRYP_ERR_CLEAR Read (RDERR) or Write Error (WRERR) Flag Clear+ − * @arg @ref CRYP_CCF_CLEAR Computation Complete Flag (CCF) Clear + − * @retval None+ − */+ − #define __HAL_CRYP_CLEAR_IT(__INTERRUPT__) SET_BIT(AES->CR, (__INTERRUPT__))+ − + − + − /**+ − * @brief Enable the CRYP interrupt. + − * @param __INTERRUPT__ CRYP Interrupt.+ − * This parameter can be one of the following values: + − * @arg @ref CRYP_IT_ERRIE Error interrupt (used for RDERR and WRERR)+ − * @arg @ref CRYP_IT_CCFIE Computation Complete interrupt + − * @retval None+ − */+ − #define __HAL_CRYP_ENABLE_IT(__INTERRUPT__) ((AES->CR) |= (__INTERRUPT__))+ − + − + − /**+ − * @brief Disable the CRYP interrupt.+ − * @param __INTERRUPT__ CRYP Interrupt.+ − * This parameter can be one of the following values: + − * @arg @ref CRYP_IT_ERRIE Error interrupt (used for RDERR and WRERR)+ − * @arg @ref CRYP_IT_CCFIE Computation Complete interrupt + − * @retval None+ − */+ − #define __HAL_CRYP_DISABLE_IT(__INTERRUPT__) ((AES->CR) &= ~(__INTERRUPT__))+ − + − /**+ − * @}+ − */+ − + − /* Private macros --------------------------------------------------------*/+ − /** @addtogroup CRYP_Private_Macros CRYP Private Macros+ − * @{+ − */+ − + − /**+ − * @brief Verify the key size length.+ − * @param __KEYSIZE__ Ciphering/deciphering algorithm key size. + − * @retval SET (__KEYSIZE__ is a valid value) or RESET (__KEYSIZE__ is invalid)+ − */ + − #define IS_CRYP_KEYSIZE(__KEYSIZE__) (((__KEYSIZE__) == CRYP_KEYSIZE_128B) || \+ − ((__KEYSIZE__) == CRYP_KEYSIZE_256B))+ − + − /**+ − * @brief Verify the input data type.+ − * @param __DATATYPE__ Ciphering/deciphering algorithm input data type.+ − * @retval SET (__DATATYPE__ is valid) or RESET (__DATATYPE__ is invalid)+ − */ + − #define IS_CRYP_DATATYPE(__DATATYPE__) (((__DATATYPE__) == CRYP_DATATYPE_32B) || \+ − ((__DATATYPE__) == CRYP_DATATYPE_16B) || \+ − ((__DATATYPE__) == CRYP_DATATYPE_8B) || \+ − ((__DATATYPE__) == CRYP_DATATYPE_1B))+ − + − /**+ − * @brief Verify the CRYP AES IP running mode.+ − * @param __MODE__ CRYP AES IP running mode.+ − * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)+ − */ + − #define IS_CRYP_AES(__MODE__) (((__MODE__) == CRYP_AES_DISABLE) || \+ − ((__MODE__) == CRYP_AES_ENABLE)) + − + − /**+ − * @brief Verify the selected CRYP algorithm.+ − * @param __ALGOMODE__ Selected CRYP algorithm (ciphering, deciphering, key derivation or a combination of the latter).+ − * @retval SET (__ALGOMODE__ is valid) or RESET (__ALGOMODE__ is invalid)+ − */ + − #define IS_CRYP_ALGOMODE(__ALGOMODE__) (((__ALGOMODE__) == CRYP_ALGOMODE_ENCRYPT) || \+ − ((__ALGOMODE__) == CRYP_ALGOMODE_KEYDERIVATION) || \+ − ((__ALGOMODE__) == CRYP_ALGOMODE_DECRYPT) || \+ − ((__ALGOMODE__) == CRYP_ALGOMODE_TAG_GENERATION) || \+ − ((__ALGOMODE__) == CRYP_ALGOMODE_KEYDERIVATION_DECRYPT)) + − + − /**+ − * @brief Verify the selected CRYP chaining algorithm.+ − * @param __CHAINMODE__ Selected CRYP chaining algorithm.+ − * @retval SET (__CHAINMODE__ is valid) or RESET (__CHAINMODE__ is invalid)+ − */ + − #if defined(AES_CR_NPBLB)+ − #define IS_CRYP_CHAINMODE(__CHAINMODE__) (((__CHAINMODE__) == CRYP_CHAINMODE_AES_ECB) || \+ − ((__CHAINMODE__) == CRYP_CHAINMODE_AES_CBC) || \+ − ((__CHAINMODE__) == CRYP_CHAINMODE_AES_CTR) || \+ − ((__CHAINMODE__) == CRYP_CHAINMODE_AES_GCM_GMAC) || \+ − ((__CHAINMODE__) == CRYP_CHAINMODE_AES_CCM_CMAC)) + − #else+ − #define IS_CRYP_CHAINMODE(__CHAINMODE__) (((__CHAINMODE__) == CRYP_CHAINMODE_AES_ECB) || \+ − ((__CHAINMODE__) == CRYP_CHAINMODE_AES_CBC) || \+ − ((__CHAINMODE__) == CRYP_CHAINMODE_AES_CTR) || \+ − ((__CHAINMODE__) == CRYP_CHAINMODE_AES_GCM_GMAC) || \+ − ((__CHAINMODE__) == CRYP_CHAINMODE_AES_CMAC)) + − #endif + − + − /**+ − * @brief Verify the deciphering key write option.+ − * @param __WRITE__ deciphering key write option.+ − * @retval SET (__WRITE__ is valid) or RESET (__WRITE__ is invalid)+ − */ + − #define IS_CRYP_WRITE(__WRITE__) (((__WRITE__) == CRYP_KEY_WRITE_ENABLE) || \+ − ((__WRITE__) == CRYP_KEY_WRITE_DISABLE))+ − + − /**+ − * @brief Verify the CRYP input data DMA mode.+ − * @param __MODE__ CRYP input data DMA mode.+ − * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)+ − */ + − #define IS_CRYP_DMAIN(__MODE__) (((__MODE__) == CRYP_DMAIN_DISABLE) || \+ − ((__MODE__) == CRYP_DMAIN_ENABLE)) + − + − /**+ − * @brief Verify the CRYP output data DMA mode.+ − * @param __MODE__ CRYP output data DMA mode.+ − * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)+ − */ + − #define IS_CRYP_DMAOUT(__MODE__) (((__MODE__) == CRYP_DMAOUT_DISABLE) || \+ − ((__MODE__) == CRYP_DMAOUT_ENABLE)) + − + − /**+ − * @brief Verify the CRYP AES ciphering/deciphering/authentication algorithm phase.+ − * @param __PHASE__ CRYP AES ciphering/deciphering/authentication algorithm phase.+ − * @retval SET (__PHASE__ is valid) or RESET (__PHASE__ is invalid)+ − */ + − #define IS_CRYP_GCMCMAC_PHASE(__PHASE__) (((__PHASE__) == CRYP_GCM_INIT_PHASE) || \+ − ((__PHASE__) == CRYP_GCMCMAC_HEADER_PHASE) || \+ − ((__PHASE__) == CRYP_GCM_PAYLOAD_PHASE) || \+ − ((__PHASE__) == CRYP_GCMCMAC_FINAL_PHASE))+ − + − /**+ − * @}+ − */+ − + − /* Include CRYP HAL Extended module */+ − #include "stm32f4xx_hal_cryp_ex.h"+ − + − /* Exported functions --------------------------------------------------------*/+ − /** @addtogroup CRYP_Exported_Functions CRYP Exported Functions+ − * @{+ − */+ − + − /** @addtogroup CRYP_Exported_Functions_Group1 Initialization and deinitialization functions+ − * @{+ − */+ − + − /* Initialization/de-initialization functions ********************************/+ − HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp);+ − HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp);+ − + − /* MSP initialization/de-initialization functions ****************************/+ − void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp);+ − void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp);+ − + − /**+ − * @}+ − */+ − + − /** @addtogroup CRYP_Exported_Functions_Group2 AES processing functions + − * @{+ − */ + − + − /* AES encryption/decryption processing functions ****************************/+ − + − /* AES encryption/decryption using polling ***********************************/+ − HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);+ − HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);+ − HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);+ − HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);+ − HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);+ − HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);+ − + − /* AES encryption/decryption using interrupt *********************************/+ − HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);+ − HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);+ − HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);+ − HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);+ − HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);+ − HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);+ − + − /* AES encryption/decryption using DMA ***************************************/+ − HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);+ − HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);+ − HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);+ − HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);+ − HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);+ − HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);+ − + − /**+ − * @}+ − */+ − + − /** @addtogroup CRYP_Exported_Functions_Group3 Callback functions+ − * @{+ − */ + − /* CallBack functions ********************************************************/+ − void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp);+ − void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp);+ − void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp); + − + − /**+ − * @}+ − */+ − + − /** @addtogroup CRYP_Exported_Functions_Group4 CRYP IRQ handler + − * @{+ − */ + − + − /* AES interrupt handling function *******************************************/+ − void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp);+ − + − /**+ − * @}+ − */+ − + − /** @addtogroup CRYP_Exported_Functions_Group5 Peripheral State functions + − * @{+ − */+ − + − /* Peripheral State functions ************************************************/+ − HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp);+ − uint32_t HAL_CRYP_GetError(CRYP_HandleTypeDef *hcryp);+ − + − /**+ − * @}+ − */+ − + − /**+ − * @}+ − */ + − + − + − #endif /* AES */+ − + − /**+ − * @}+ − */ + − + − /**+ − * @}+ − */ + − + − #ifdef __cplusplus+ − }+ − #endif+ − + − #endif /* __STM32F4xx_HAL_CRYP_H */+ − + − /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/+ −
