Mercurial > public > ostc4
view Common/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dma2d.h @ 511:5185ade91096
Minor adaptions in page layout:
WindowLineSpacing was used to establish a small separation from y0. This caused problems in string visualization (line > 1). To avoid the the window parameters have been adapted and WindowLineSpacing set to an value allowing two lines of data
Removed instrumentation for BigFon_V2
author | Ideenmodellierer |
---|---|
date | Sun, 30 Aug 2020 17:30:54 +0200 |
parents | c78bcbd5deda |
children |
line wrap: on
line source
/** ****************************************************************************** * @file stm32f4xx_ll_dma2d.h * @author MCD Application Team * @brief Header file of DMA2D LL module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_LL_DMA2D_H #define __STM32F4xx_LL_DMA2D_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx.h" /** @addtogroup STM32F4xx_LL_Driver * @{ */ #if defined (DMA2D) /** @defgroup DMA2D_LL DMA2D * @{ */ /* Private types -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private constants ---------------------------------------------------------*/ /* Private macros ------------------------------------------------------------*/ #if defined(USE_FULL_LL_DRIVER) /** @defgroup DMA2D_LL_Private_Macros DMA2D Private Macros * @{ */ /** * @} */ #endif /*USE_FULL_LL_DRIVER*/ /* Exported types ------------------------------------------------------------*/ #if defined(USE_FULL_LL_DRIVER) /** @defgroup DMA2D_LL_ES_Init_Struct DMA2D Exported Init structures * @{ */ /** * @brief LL DMA2D Init Structure Definition */ typedef struct { uint32_t Mode; /*!< Specifies the DMA2D transfer mode. - This parameter can be one value of @ref DMA2D_LL_EC_MODE. This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetMode().*/ uint32_t ColorMode; /*!< Specifies the color format of the output image. - This parameter can be one value of @ref DMA2D_LL_EC_OUTPUT_COLOR_MODE. This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColorMode(). */ uint32_t OutputBlue; /*!< Specifies the Blue value of the output image. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if RGB565 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration function @ref LL_DMA2D_ConfigOutputColor(). */ uint32_t OutputGreen; /*!< Specifies the Green value of the output image. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x3F if RGB565 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration function @ref LL_DMA2D_ConfigOutputColor(). */ uint32_t OutputRed; /*!< Specifies the Red value of the output image. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if RGB565 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration function @ref LL_DMA2D_ConfigOutputColor(). */ uint32_t OutputAlpha; /*!< Specifies the Alpha channel of the output image. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x01 if ARGB1555 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. - This parameter is not considered if RGB888 or RGB565 color mode is selected. This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration function @ref LL_DMA2D_ConfigOutputColor(). */ uint32_t OutputMemoryAddress; /*!< Specifies the memory address. - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFFFFFF. This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputMemAddr(). */ uint32_t LineOffset; /*!< Specifies the output line offset value. - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetLineOffset(). */ uint32_t NbrOfLines; /*!< Specifies the number of lines of the area to be transferred. - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetNbrOfLines(). */ uint32_t NbrOfPixelsPerLines; /*!< Specifies the number of pixels per lines of the area to be transfered. - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetNbrOfPixelsPerLines(). */ } LL_DMA2D_InitTypeDef; /** * @brief LL DMA2D Layer Configuration Structure Definition */ typedef struct { uint32_t MemoryAddress; /*!< Specifies the foreground or background memory address. - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFFFFFF. This parameter can be modified afterwards using unitary functions - @ref LL_DMA2D_FGND_SetMemAddr() for foreground layer, - @ref LL_DMA2D_BGND_SetMemAddr() for background layer. */ uint32_t LineOffset; /*!< Specifies the foreground or background line offset value. - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. This parameter can be modified afterwards using unitary functions - @ref LL_DMA2D_FGND_SetLineOffset() for foreground layer, - @ref LL_DMA2D_BGND_SetLineOffset() for background layer. */ uint32_t ColorMode; /*!< Specifies the foreground or background color mode. - This parameter can be one value of @ref DMA2D_LL_EC_INPUT_COLOR_MODE. This parameter can be modified afterwards using unitary functions - @ref LL_DMA2D_FGND_SetColorMode() for foreground layer, - @ref LL_DMA2D_BGND_SetColorMode() for background layer. */ uint32_t CLUTColorMode; /*!< Specifies the foreground or background CLUT color mode. - This parameter can be one value of @ref DMA2D_LL_EC_CLUT_COLOR_MODE. This parameter can be modified afterwards using unitary functions - @ref LL_DMA2D_FGND_SetCLUTColorMode() for foreground layer, - @ref LL_DMA2D_BGND_SetCLUTColorMode() for background layer. */ uint32_t CLUTSize; /*!< Specifies the foreground or background CLUT size. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. This parameter can be modified afterwards using unitary functions - @ref LL_DMA2D_FGND_SetCLUTSize() for foreground layer, - @ref LL_DMA2D_BGND_SetCLUTSize() for background layer. */ uint32_t AlphaMode; /*!< Specifies the foreground or background alpha mode. - This parameter can be one value of @ref DMA2D_LL_EC_ALPHA_MODE. This parameter can be modified afterwards using unitary functions - @ref LL_DMA2D_FGND_SetAlphaMode() for foreground layer, - @ref LL_DMA2D_BGND_SetAlphaMode() for background layer. */ uint32_t Alpha; /*!< Specifies the foreground or background Alpha value. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. This parameter can be modified afterwards using unitary functions - @ref LL_DMA2D_FGND_SetAlpha() for foreground layer, - @ref LL_DMA2D_BGND_SetAlpha() for background layer. */ uint32_t Blue; /*!< Specifies the foreground or background Blue color value. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. This parameter can be modified afterwards using unitary functions - @ref LL_DMA2D_FGND_SetBlueColor() for foreground layer, - @ref LL_DMA2D_BGND_SetBlueColor() for background layer. */ uint32_t Green; /*!< Specifies the foreground or background Green color value. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. This parameter can be modified afterwards using unitary functions - @ref LL_DMA2D_FGND_SetGreenColor() for foreground layer, - @ref LL_DMA2D_BGND_SetGreenColor() for background layer. */ uint32_t Red; /*!< Specifies the foreground or background Red color value. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. This parameter can be modified afterwards using unitary functions - @ref LL_DMA2D_FGND_SetRedColor() for foreground layer, - @ref LL_DMA2D_BGND_SetRedColor() for background layer. */ uint32_t CLUTMemoryAddress; /*!< Specifies the foreground or background CLUT memory address. - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFFFFFF. This parameter can be modified afterwards using unitary functions - @ref LL_DMA2D_FGND_SetCLUTMemAddr() for foreground layer, - @ref LL_DMA2D_BGND_SetCLUTMemAddr() for background layer. */ } LL_DMA2D_LayerCfgTypeDef; /** * @brief LL DMA2D Output Color Structure Definition */ typedef struct { uint32_t ColorMode; /*!< Specifies the color format of the output image. - This parameter can be one value of @ref DMA2D_LL_EC_OUTPUT_COLOR_MODE. This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColorMode(). */ uint32_t OutputBlue; /*!< Specifies the Blue value of the output image. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if RGB565 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration function @ref LL_DMA2D_ConfigOutputColor(). */ uint32_t OutputGreen; /*!< Specifies the Green value of the output image. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x3F if RGB565 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration function @ref LL_DMA2D_ConfigOutputColor(). */ uint32_t OutputRed; /*!< Specifies the Red value of the output image. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if RGB565 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration function @ref LL_DMA2D_ConfigOutputColor(). */ uint32_t OutputAlpha; /*!< Specifies the Alpha channel of the output image. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x01 if ARGB1555 color mode is selected. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. - This parameter is not considered if RGB888 or RGB565 color mode is selected. This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration function @ref LL_DMA2D_ConfigOutputColor(). */ } LL_DMA2D_ColorTypeDef; /** * @} */ #endif /* USE_FULL_LL_DRIVER */ /* Exported constants --------------------------------------------------------*/ /** @defgroup DMA2D_LL_Exported_Constants DMA2D Exported Constants * @{ */ /** @defgroup DMA2D_LL_EC_GET_FLAG Get Flags Defines * @brief Flags defines which can be used with LL_DMA2D_ReadReg function * @{ */ #define LL_DMA2D_FLAG_CEIF DMA2D_ISR_CEIF /*!< Configuration Error Interrupt Flag */ #define LL_DMA2D_FLAG_CTCIF DMA2D_ISR_CTCIF /*!< CLUT Transfer Complete Interrupt Flag */ #define LL_DMA2D_FLAG_CAEIF DMA2D_ISR_CAEIF /*!< CLUT Access Error Interrupt Flag */ #define LL_DMA2D_FLAG_TWIF DMA2D_ISR_TWIF /*!< Transfer Watermark Interrupt Flag */ #define LL_DMA2D_FLAG_TCIF DMA2D_ISR_TCIF /*!< Transfer Complete Interrupt Flag */ #define LL_DMA2D_FLAG_TEIF DMA2D_ISR_TEIF /*!< Transfer Error Interrupt Flag */ /** * @} */ /** @defgroup DMA2D_LL_EC_IT IT Defines * @brief IT defines which can be used with LL_DMA2D_ReadReg and LL_DMA2D_WriteReg functions * @{ */ #define LL_DMA2D_IT_CEIE DMA2D_CR_CEIE /*!< Configuration Error Interrupt */ #define LL_DMA2D_IT_CTCIE DMA2D_CR_CTCIE /*!< CLUT Transfer Complete Interrupt */ #define LL_DMA2D_IT_CAEIE DMA2D_CR_CAEIE /*!< CLUT Access Error Interrupt */ #define LL_DMA2D_IT_TWIE DMA2D_CR_TWIE /*!< Transfer Watermark Interrupt */ #define LL_DMA2D_IT_TCIE DMA2D_CR_TCIE /*!< Transfer Complete Interrupt */ #define LL_DMA2D_IT_TEIE DMA2D_CR_TEIE /*!< Transfer Error Interrupt */ /** * @} */ /** @defgroup DMA2D_LL_EC_MODE Mode * @{ */ #define LL_DMA2D_MODE_M2M 0x00000000U /*!< DMA2D memory to memory transfer mode */ #define LL_DMA2D_MODE_M2M_PFC DMA2D_CR_MODE_0 /*!< DMA2D memory to memory with pixel format conversion transfer mode */ #define LL_DMA2D_MODE_M2M_BLEND DMA2D_CR_MODE_1 /*!< DMA2D memory to memory with blending transfer mode */ #define LL_DMA2D_MODE_R2M DMA2D_CR_MODE /*!< DMA2D register to memory transfer mode */ /** * @} */ /** @defgroup DMA2D_LL_EC_OUTPUT_COLOR_MODE Output Color Mode * @{ */ #define LL_DMA2D_OUTPUT_MODE_ARGB8888 0x00000000U /*!< ARGB8888 */ #define LL_DMA2D_OUTPUT_MODE_RGB888 DMA2D_OPFCCR_CM_0 /*!< RGB888 */ #define LL_DMA2D_OUTPUT_MODE_RGB565 DMA2D_OPFCCR_CM_1 /*!< RGB565 */ #define LL_DMA2D_OUTPUT_MODE_ARGB1555 (DMA2D_OPFCCR_CM_0|DMA2D_OPFCCR_CM_1) /*!< ARGB1555 */ #define LL_DMA2D_OUTPUT_MODE_ARGB4444 DMA2D_OPFCCR_CM_2 /*!< ARGB4444 */ /** * @} */ /** @defgroup DMA2D_LL_EC_INPUT_COLOR_MODE Input Color Mode * @{ */ #define LL_DMA2D_INPUT_MODE_ARGB8888 0x00000000U /*!< ARGB8888 */ #define LL_DMA2D_INPUT_MODE_RGB888 DMA2D_FGPFCCR_CM_0 /*!< RGB888 */ #define LL_DMA2D_INPUT_MODE_RGB565 DMA2D_FGPFCCR_CM_1 /*!< RGB565 */ #define LL_DMA2D_INPUT_MODE_ARGB1555 (DMA2D_FGPFCCR_CM_0|DMA2D_FGPFCCR_CM_1) /*!< ARGB1555 */ #define LL_DMA2D_INPUT_MODE_ARGB4444 DMA2D_FGPFCCR_CM_2 /*!< ARGB4444 */ #define LL_DMA2D_INPUT_MODE_L8 (DMA2D_FGPFCCR_CM_0|DMA2D_FGPFCCR_CM_2) /*!< L8 */ #define LL_DMA2D_INPUT_MODE_AL44 (DMA2D_FGPFCCR_CM_1|DMA2D_FGPFCCR_CM_2) /*!< AL44 */ #define LL_DMA2D_INPUT_MODE_AL88 (DMA2D_FGPFCCR_CM_0|DMA2D_FGPFCCR_CM_1|DMA2D_FGPFCCR_CM_2) /*!< AL88 */ #define LL_DMA2D_INPUT_MODE_L4 DMA2D_FGPFCCR_CM_3 /*!< L4 */ #define LL_DMA2D_INPUT_MODE_A8 (DMA2D_FGPFCCR_CM_0|DMA2D_FGPFCCR_CM_3) /*!< A8 */ #define LL_DMA2D_INPUT_MODE_A4 (DMA2D_FGPFCCR_CM_1|DMA2D_FGPFCCR_CM_3) /*!< A4 */ /** * @} */ /** @defgroup DMA2D_LL_EC_ALPHA_MODE Alpha Mode * @{ */ #define LL_DMA2D_ALPHA_MODE_NO_MODIF 0x00000000U /*!< No modification of the alpha channel value */ #define LL_DMA2D_ALPHA_MODE_REPLACE DMA2D_FGPFCCR_AM_0 /*!< Replace original alpha channel value by programmed alpha value */ #define LL_DMA2D_ALPHA_MODE_COMBINE DMA2D_FGPFCCR_AM_1 /*!< Replace original alpha channel value by programmed alpha value with original alpha channel value */ /** * @} */ /** @defgroup DMA2D_LL_EC_CLUT_COLOR_MODE CLUT Color Mode * @{ */ #define LL_DMA2D_CLUT_COLOR_MODE_ARGB8888 0x00000000U /*!< ARGB8888 */ #define LL_DMA2D_CLUT_COLOR_MODE_RGB888 DMA2D_FGPFCCR_CCM /*!< RGB888 */ /** * @} */ /** * @} */ /* Exported macro ------------------------------------------------------------*/ /** @defgroup DMA2D_LL_Exported_Macros DMA2D Exported Macros * @{ */ /** @defgroup DMA2D_LL_EM_WRITE_READ Common Write and read registers Macros * @{ */ /** * @brief Write a value in DMA2D register. * @param __INSTANCE__ DMA2D Instance * @param __REG__ Register to be written * @param __VALUE__ Value to be written in the register * @retval None */ #define LL_DMA2D_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) /** * @brief Read a value in DMA2D register. * @param __INSTANCE__ DMA2D Instance * @param __REG__ Register to be read * @retval Register value */ #define LL_DMA2D_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) /** * @} */ /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @defgroup DMA2D_LL_Exported_Functions DMA2D Exported Functions * @{ */ /** @defgroup DMA2D_LL_EF_Configuration Configuration Functions * @{ */ /** * @brief Start a DMA2D transfer. * @rmtoll CR START LL_DMA2D_Start * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_Start(DMA2D_TypeDef *DMA2Dx) { SET_BIT(DMA2Dx->CR, DMA2D_CR_START); } /** * @brief Indicate if a DMA2D transfer is ongoing. * @rmtoll CR START LL_DMA2D_IsTransferOngoing * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsTransferOngoing(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->CR, DMA2D_CR_START) == (DMA2D_CR_START)); } /** * @brief Suspend DMA2D transfer. * @note This API can be used to suspend automatic foreground or background CLUT loading. * @rmtoll CR SUSP LL_DMA2D_Suspend * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_Suspend(DMA2D_TypeDef *DMA2Dx) { MODIFY_REG(DMA2Dx->CR, DMA2D_CR_SUSP | DMA2D_CR_START, DMA2D_CR_SUSP); } /** * @brief Resume DMA2D transfer. * @note This API can be used to resume automatic foreground or background CLUT loading. * @rmtoll CR SUSP LL_DMA2D_Resume * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_Resume(DMA2D_TypeDef *DMA2Dx) { CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_SUSP | DMA2D_CR_START); } /** * @brief Indicate if DMA2D transfer is suspended. * @note This API can be used to indicate whether or not automatic foreground or * background CLUT loading is suspended. * @rmtoll CR SUSP LL_DMA2D_IsSuspended * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsSuspended(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->CR, DMA2D_CR_SUSP) == (DMA2D_CR_SUSP)); } /** * @brief Abort DMA2D transfer. * @note This API can be used to abort automatic foreground or background CLUT loading. * @rmtoll CR ABORT LL_DMA2D_Abort * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_Abort(DMA2D_TypeDef *DMA2Dx) { MODIFY_REG(DMA2Dx->CR, DMA2D_CR_ABORT | DMA2D_CR_START, DMA2D_CR_ABORT); } /** * @brief Indicate if DMA2D transfer is aborted. * @note This API can be used to indicate whether or not automatic foreground or * background CLUT loading is aborted. * @rmtoll CR ABORT LL_DMA2D_IsAborted * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsAborted(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->CR, DMA2D_CR_ABORT) == (DMA2D_CR_ABORT)); } /** * @brief Set DMA2D mode. * @rmtoll CR MODE LL_DMA2D_SetMode * @param DMA2Dx DMA2D Instance * @param Mode This parameter can be one of the following values: * @arg @ref LL_DMA2D_MODE_M2M * @arg @ref LL_DMA2D_MODE_M2M_PFC * @arg @ref LL_DMA2D_MODE_M2M_BLEND * @arg @ref LL_DMA2D_MODE_R2M * @retval None */ __STATIC_INLINE void LL_DMA2D_SetMode(DMA2D_TypeDef *DMA2Dx, uint32_t Mode) { MODIFY_REG(DMA2Dx->CR, DMA2D_CR_MODE, Mode); } /** * @brief Return DMA2D mode * @rmtoll CR MODE LL_DMA2D_GetMode * @param DMA2Dx DMA2D Instance * @retval Returned value can be one of the following values: * @arg @ref LL_DMA2D_MODE_M2M * @arg @ref LL_DMA2D_MODE_M2M_PFC * @arg @ref LL_DMA2D_MODE_M2M_BLEND * @arg @ref LL_DMA2D_MODE_R2M */ __STATIC_INLINE uint32_t LL_DMA2D_GetMode(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->CR, DMA2D_CR_MODE)); } /** * @brief Set DMA2D output color mode. * @rmtoll OPFCCR CM LL_DMA2D_SetOutputColorMode * @param DMA2Dx DMA2D Instance * @param ColorMode This parameter can be one of the following values: * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB8888 * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB888 * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB565 * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB1555 * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB4444 * @retval None */ __STATIC_INLINE void LL_DMA2D_SetOutputColorMode(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode) { MODIFY_REG(DMA2Dx->OPFCCR, DMA2D_OPFCCR_CM, ColorMode); } /** * @brief Return DMA2D output color mode. * @rmtoll OPFCCR CM LL_DMA2D_GetOutputColorMode * @param DMA2Dx DMA2D Instance * @retval Returned value can be one of the following values: * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB8888 * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB888 * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB565 * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB1555 * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB4444 */ __STATIC_INLINE uint32_t LL_DMA2D_GetOutputColorMode(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->OPFCCR, DMA2D_OPFCCR_CM)); } /** * @brief Set DMA2D line offset, expressed on 14 bits ([13:0] bits). * @rmtoll OOR LO LL_DMA2D_SetLineOffset * @param DMA2Dx DMA2D Instance * @param LineOffset Value between Min_Data=0 and Max_Data=0x3FFF * @retval None */ __STATIC_INLINE void LL_DMA2D_SetLineOffset(DMA2D_TypeDef *DMA2Dx, uint32_t LineOffset) { MODIFY_REG(DMA2Dx->OOR, DMA2D_OOR_LO, LineOffset); } /** * @brief Return DMA2D line offset, expressed on 14 bits ([13:0] bits). * @rmtoll OOR LO LL_DMA2D_GetLineOffset * @param DMA2Dx DMA2D Instance * @retval Line offset value between Min_Data=0 and Max_Data=0x3FFF */ __STATIC_INLINE uint32_t LL_DMA2D_GetLineOffset(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->OOR, DMA2D_OOR_LO)); } /** * @brief Set DMA2D number of pixels per lines, expressed on 14 bits ([13:0] bits). * @rmtoll NLR PL LL_DMA2D_SetNbrOfPixelsPerLines * @param DMA2Dx DMA2D Instance * @param NbrOfPixelsPerLines Value between Min_Data=0 and Max_Data=0x3FFF * @retval None */ __STATIC_INLINE void LL_DMA2D_SetNbrOfPixelsPerLines(DMA2D_TypeDef *DMA2Dx, uint32_t NbrOfPixelsPerLines) { MODIFY_REG(DMA2Dx->NLR, DMA2D_NLR_PL, (NbrOfPixelsPerLines << DMA2D_NLR_PL_Pos)); } /** * @brief Return DMA2D number of pixels per lines, expressed on 14 bits ([13:0] bits) * @rmtoll NLR PL LL_DMA2D_GetNbrOfPixelsPerLines * @param DMA2Dx DMA2D Instance * @retval Number of pixels per lines value between Min_Data=0 and Max_Data=0x3FFF */ __STATIC_INLINE uint32_t LL_DMA2D_GetNbrOfPixelsPerLines(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->NLR, DMA2D_NLR_PL) >> DMA2D_NLR_PL_Pos); } /** * @brief Set DMA2D number of lines, expressed on 16 bits ([15:0] bits). * @rmtoll NLR NL LL_DMA2D_SetNbrOfLines * @param DMA2Dx DMA2D Instance * @param NbrOfLines Value between Min_Data=0 and Max_Data=0xFFFF * @retval None */ __STATIC_INLINE void LL_DMA2D_SetNbrOfLines(DMA2D_TypeDef *DMA2Dx, uint32_t NbrOfLines) { MODIFY_REG(DMA2Dx->NLR, DMA2D_NLR_NL, NbrOfLines); } /** * @brief Return DMA2D number of lines, expressed on 16 bits ([15:0] bits). * @rmtoll NLR NL LL_DMA2D_GetNbrOfLines * @param DMA2Dx DMA2D Instance * @retval Number of lines value between Min_Data=0 and Max_Data=0xFFFF */ __STATIC_INLINE uint32_t LL_DMA2D_GetNbrOfLines(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->NLR, DMA2D_NLR_NL)); } /** * @brief Set DMA2D output memory address, expressed on 32 bits ([31:0] bits). * @rmtoll OMAR MA LL_DMA2D_SetOutputMemAddr * @param DMA2Dx DMA2D Instance * @param OutputMemoryAddress Value between Min_Data=0 and Max_Data=0xFFFFFFFF * @retval None */ __STATIC_INLINE void LL_DMA2D_SetOutputMemAddr(DMA2D_TypeDef *DMA2Dx, uint32_t OutputMemoryAddress) { LL_DMA2D_WriteReg(DMA2Dx, OMAR, OutputMemoryAddress); } /** * @brief Get DMA2D output memory address, expressed on 32 bits ([31:0] bits). * @rmtoll OMAR MA LL_DMA2D_GetOutputMemAddr * @param DMA2Dx DMA2D Instance * @retval Output memory address value between Min_Data=0 and Max_Data=0xFFFFFFFF */ __STATIC_INLINE uint32_t LL_DMA2D_GetOutputMemAddr(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(LL_DMA2D_ReadReg(DMA2Dx, OMAR)); } /** * @brief Set DMA2D output color, expressed on 32 bits ([31:0] bits). * @note Output color format depends on output color mode, ARGB8888, RGB888, * RGB565, ARGB1555 or ARGB4444. * @note LL_DMA2D_ConfigOutputColor() API may be used instead if colors values formatting * with respect to color mode is not done by the user code. * @rmtoll OCOLR BLUE LL_DMA2D_SetOutputColor\n * OCOLR GREEN LL_DMA2D_SetOutputColor\n * OCOLR RED LL_DMA2D_SetOutputColor\n * OCOLR ALPHA LL_DMA2D_SetOutputColor * @param DMA2Dx DMA2D Instance * @param OutputColor Value between Min_Data=0 and Max_Data=0xFFFFFFFF * @retval None */ __STATIC_INLINE void LL_DMA2D_SetOutputColor(DMA2D_TypeDef *DMA2Dx, uint32_t OutputColor) { MODIFY_REG(DMA2Dx->OCOLR, (DMA2D_OCOLR_BLUE_1 | DMA2D_OCOLR_GREEN_1 | DMA2D_OCOLR_RED_1 | DMA2D_OCOLR_ALPHA_1), \ OutputColor); } /** * @brief Get DMA2D output color, expressed on 32 bits ([31:0] bits). * @note Alpha channel and red, green, blue color values must be retrieved from the returned * value based on the output color mode (ARGB8888, RGB888, RGB565, ARGB1555 or ARGB4444) * as set by @ref LL_DMA2D_SetOutputColorMode. * @rmtoll OCOLR BLUE LL_DMA2D_GetOutputColor\n * OCOLR GREEN LL_DMA2D_GetOutputColor\n * OCOLR RED LL_DMA2D_GetOutputColor\n * OCOLR ALPHA LL_DMA2D_GetOutputColor * @param DMA2Dx DMA2D Instance * @retval Output color value between Min_Data=0 and Max_Data=0xFFFFFFFF */ __STATIC_INLINE uint32_t LL_DMA2D_GetOutputColor(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->OCOLR, \ (DMA2D_OCOLR_BLUE_1 | DMA2D_OCOLR_GREEN_1 | DMA2D_OCOLR_RED_1 | DMA2D_OCOLR_ALPHA_1))); } /** * @brief Set DMA2D line watermark, expressed on 16 bits ([15:0] bits). * @rmtoll LWR LW LL_DMA2D_SetLineWatermark * @param DMA2Dx DMA2D Instance * @param LineWatermark Value between Min_Data=0 and Max_Data=0xFFFF * @retval None */ __STATIC_INLINE void LL_DMA2D_SetLineWatermark(DMA2D_TypeDef *DMA2Dx, uint32_t LineWatermark) { MODIFY_REG(DMA2Dx->LWR, DMA2D_LWR_LW, LineWatermark); } /** * @brief Return DMA2D line watermark, expressed on 16 bits ([15:0] bits). * @rmtoll LWR LW LL_DMA2D_GetLineWatermark * @param DMA2Dx DMA2D Instance * @retval Line watermark value between Min_Data=0 and Max_Data=0xFFFF */ __STATIC_INLINE uint32_t LL_DMA2D_GetLineWatermark(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->LWR, DMA2D_LWR_LW)); } /** * @brief Set DMA2D dead time, expressed on 8 bits ([7:0] bits). * @rmtoll AMTCR DT LL_DMA2D_SetDeadTime * @param DMA2Dx DMA2D Instance * @param DeadTime Value between Min_Data=0 and Max_Data=0xFF * @retval None */ __STATIC_INLINE void LL_DMA2D_SetDeadTime(DMA2D_TypeDef *DMA2Dx, uint32_t DeadTime) { MODIFY_REG(DMA2Dx->AMTCR, DMA2D_AMTCR_DT, (DeadTime << DMA2D_AMTCR_DT_Pos)); } /** * @brief Return DMA2D dead time, expressed on 8 bits ([7:0] bits). * @rmtoll AMTCR DT LL_DMA2D_GetDeadTime * @param DMA2Dx DMA2D Instance * @retval Dead time value between Min_Data=0 and Max_Data=0xFF */ __STATIC_INLINE uint32_t LL_DMA2D_GetDeadTime(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->AMTCR, DMA2D_AMTCR_DT) >> DMA2D_AMTCR_DT_Pos); } /** * @brief Enable DMA2D dead time functionality. * @rmtoll AMTCR EN LL_DMA2D_EnableDeadTime * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_EnableDeadTime(DMA2D_TypeDef *DMA2Dx) { SET_BIT(DMA2Dx->AMTCR, DMA2D_AMTCR_EN); } /** * @brief Disable DMA2D dead time functionality. * @rmtoll AMTCR EN LL_DMA2D_DisableDeadTime * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_DisableDeadTime(DMA2D_TypeDef *DMA2Dx) { CLEAR_BIT(DMA2Dx->AMTCR, DMA2D_AMTCR_EN); } /** * @brief Indicate if DMA2D dead time functionality is enabled. * @rmtoll AMTCR EN LL_DMA2D_IsEnabledDeadTime * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsEnabledDeadTime(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->AMTCR, DMA2D_AMTCR_EN) == (DMA2D_AMTCR_EN)); } /** @defgroup DMA2D_LL_EF_FGND_Configuration Foreground Configuration Functions * @{ */ /** * @brief Set DMA2D foreground memory address, expressed on 32 bits ([31:0] bits). * @rmtoll FGMAR MA LL_DMA2D_FGND_SetMemAddr * @param DMA2Dx DMA2D Instance * @param MemoryAddress Value between Min_Data=0 and Max_Data=0xFFFFFFFF * @retval None */ __STATIC_INLINE void LL_DMA2D_FGND_SetMemAddr(DMA2D_TypeDef *DMA2Dx, uint32_t MemoryAddress) { LL_DMA2D_WriteReg(DMA2Dx, FGMAR, MemoryAddress); } /** * @brief Get DMA2D foreground memory address, expressed on 32 bits ([31:0] bits). * @rmtoll FGMAR MA LL_DMA2D_FGND_GetMemAddr * @param DMA2Dx DMA2D Instance * @retval Foreground memory address value between Min_Data=0 and Max_Data=0xFFFFFFFF */ __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetMemAddr(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(LL_DMA2D_ReadReg(DMA2Dx, FGMAR)); } /** * @brief Enable DMA2D foreground CLUT loading. * @rmtoll FGPFCCR START LL_DMA2D_FGND_EnableCLUTLoad * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_FGND_EnableCLUTLoad(DMA2D_TypeDef *DMA2Dx) { SET_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_START); } /** * @brief Indicate if DMA2D foreground CLUT loading is enabled. * @rmtoll FGPFCCR START LL_DMA2D_FGND_IsEnabledCLUTLoad * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_FGND_IsEnabledCLUTLoad(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_START) == (DMA2D_FGPFCCR_START)); } /** * @brief Set DMA2D foreground color mode. * @rmtoll FGPFCCR CM LL_DMA2D_FGND_SetColorMode * @param DMA2Dx DMA2D Instance * @param ColorMode This parameter can be one of the following values: * @arg @ref LL_DMA2D_INPUT_MODE_ARGB8888 * @arg @ref LL_DMA2D_INPUT_MODE_RGB888 * @arg @ref LL_DMA2D_INPUT_MODE_RGB565 * @arg @ref LL_DMA2D_INPUT_MODE_ARGB1555 * @arg @ref LL_DMA2D_INPUT_MODE_ARGB4444 * @arg @ref LL_DMA2D_INPUT_MODE_L8 * @arg @ref LL_DMA2D_INPUT_MODE_AL44 * @arg @ref LL_DMA2D_INPUT_MODE_AL88 * @arg @ref LL_DMA2D_INPUT_MODE_L4 * @arg @ref LL_DMA2D_INPUT_MODE_A8 * @arg @ref LL_DMA2D_INPUT_MODE_A4 * @retval None */ __STATIC_INLINE void LL_DMA2D_FGND_SetColorMode(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode) { MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CM, ColorMode); } /** * @brief Return DMA2D foreground color mode. * @rmtoll FGPFCCR CM LL_DMA2D_FGND_GetColorMode * @param DMA2Dx DMA2D Instance * @retval Returned value can be one of the following values: * @arg @ref LL_DMA2D_INPUT_MODE_ARGB8888 * @arg @ref LL_DMA2D_INPUT_MODE_RGB888 * @arg @ref LL_DMA2D_INPUT_MODE_RGB565 * @arg @ref LL_DMA2D_INPUT_MODE_ARGB1555 * @arg @ref LL_DMA2D_INPUT_MODE_ARGB4444 * @arg @ref LL_DMA2D_INPUT_MODE_L8 * @arg @ref LL_DMA2D_INPUT_MODE_AL44 * @arg @ref LL_DMA2D_INPUT_MODE_AL88 * @arg @ref LL_DMA2D_INPUT_MODE_L4 * @arg @ref LL_DMA2D_INPUT_MODE_A8 * @arg @ref LL_DMA2D_INPUT_MODE_A4 */ __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetColorMode(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CM)); } /** * @brief Set DMA2D foreground alpha mode. * @rmtoll FGPFCCR AM LL_DMA2D_FGND_SetAlphaMode * @param DMA2Dx DMA2D Instance * @param AphaMode This parameter can be one of the following values: * @arg @ref LL_DMA2D_ALPHA_MODE_NO_MODIF * @arg @ref LL_DMA2D_ALPHA_MODE_REPLACE * @arg @ref LL_DMA2D_ALPHA_MODE_COMBINE * @retval None */ __STATIC_INLINE void LL_DMA2D_FGND_SetAlphaMode(DMA2D_TypeDef *DMA2Dx, uint32_t AphaMode) { MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_AM, AphaMode); } /** * @brief Return DMA2D foreground alpha mode. * @rmtoll FGPFCCR AM LL_DMA2D_FGND_GetAlphaMode * @param DMA2Dx DMA2D Instance * @retval Returned value can be one of the following values: * @arg @ref LL_DMA2D_ALPHA_MODE_NO_MODIF * @arg @ref LL_DMA2D_ALPHA_MODE_REPLACE * @arg @ref LL_DMA2D_ALPHA_MODE_COMBINE */ __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetAlphaMode(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_AM)); } /** * @brief Set DMA2D foreground alpha value, expressed on 8 bits ([7:0] bits). * @rmtoll FGPFCCR ALPHA LL_DMA2D_FGND_SetAlpha * @param DMA2Dx DMA2D Instance * @param Alpha Value between Min_Data=0 and Max_Data=0xFF * @retval None */ __STATIC_INLINE void LL_DMA2D_FGND_SetAlpha(DMA2D_TypeDef *DMA2Dx, uint32_t Alpha) { MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_ALPHA, (Alpha << DMA2D_FGPFCCR_ALPHA_Pos)); } /** * @brief Return DMA2D foreground alpha value, expressed on 8 bits ([7:0] bits). * @rmtoll FGPFCCR ALPHA LL_DMA2D_FGND_GetAlpha * @param DMA2Dx DMA2D Instance * @retval Alpha value between Min_Data=0 and Max_Data=0xFF */ __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetAlpha(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_ALPHA) >> DMA2D_FGPFCCR_ALPHA_Pos); } /** * @brief Set DMA2D foreground line offset, expressed on 14 bits ([13:0] bits). * @rmtoll FGOR LO LL_DMA2D_FGND_SetLineOffset * @param DMA2Dx DMA2D Instance * @param LineOffset Value between Min_Data=0 and Max_Data=0x3FF * @retval None */ __STATIC_INLINE void LL_DMA2D_FGND_SetLineOffset(DMA2D_TypeDef *DMA2Dx, uint32_t LineOffset) { MODIFY_REG(DMA2Dx->FGOR, DMA2D_FGOR_LO, LineOffset); } /** * @brief Return DMA2D foreground line offset, expressed on 14 bits ([13:0] bits). * @rmtoll FGOR LO LL_DMA2D_FGND_GetLineOffset * @param DMA2Dx DMA2D Instance * @retval Foreground line offset value between Min_Data=0 and Max_Data=0x3FF */ __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetLineOffset(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->FGOR, DMA2D_FGOR_LO)); } /** * @brief Set DMA2D foreground color values, expressed on 24 bits ([23:0] bits). * @rmtoll FGCOLR RED LL_DMA2D_FGND_SetColor * @rmtoll FGCOLR GREEN LL_DMA2D_FGND_SetColor * @rmtoll FGCOLR BLUE LL_DMA2D_FGND_SetColor * @param DMA2Dx DMA2D Instance * @param Red Value between Min_Data=0 and Max_Data=0xFF * @param Green Value between Min_Data=0 and Max_Data=0xFF * @param Blue Value between Min_Data=0 and Max_Data=0xFF * @retval None */ __STATIC_INLINE void LL_DMA2D_FGND_SetColor(DMA2D_TypeDef *DMA2Dx, uint32_t Red, uint32_t Green, uint32_t Blue) { MODIFY_REG(DMA2Dx->FGCOLR, (DMA2D_FGCOLR_RED | DMA2D_FGCOLR_GREEN | DMA2D_FGCOLR_BLUE), \ ((Red << DMA2D_FGCOLR_RED_Pos) | (Green << DMA2D_FGCOLR_GREEN_Pos) | Blue)); } /** * @brief Set DMA2D foreground red color value, expressed on 8 bits ([7:0] bits). * @rmtoll FGCOLR RED LL_DMA2D_FGND_SetRedColor * @param DMA2Dx DMA2D Instance * @param Red Value between Min_Data=0 and Max_Data=0xFF * @retval None */ __STATIC_INLINE void LL_DMA2D_FGND_SetRedColor(DMA2D_TypeDef *DMA2Dx, uint32_t Red) { MODIFY_REG(DMA2Dx->FGCOLR, DMA2D_FGCOLR_RED, (Red << DMA2D_FGCOLR_RED_Pos)); } /** * @brief Return DMA2D foreground red color value, expressed on 8 bits ([7:0] bits). * @rmtoll FGCOLR RED LL_DMA2D_FGND_GetRedColor * @param DMA2Dx DMA2D Instance * @retval Red color value between Min_Data=0 and Max_Data=0xFF */ __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetRedColor(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->FGCOLR, DMA2D_FGCOLR_RED) >> DMA2D_FGCOLR_RED_Pos); } /** * @brief Set DMA2D foreground green color value, expressed on 8 bits ([7:0] bits). * @rmtoll FGCOLR GREEN LL_DMA2D_FGND_SetGreenColor * @param DMA2Dx DMA2D Instance * @param Green Value between Min_Data=0 and Max_Data=0xFF * @retval None */ __STATIC_INLINE void LL_DMA2D_FGND_SetGreenColor(DMA2D_TypeDef *DMA2Dx, uint32_t Green) { MODIFY_REG(DMA2Dx->FGCOLR, DMA2D_FGCOLR_GREEN, (Green << DMA2D_FGCOLR_GREEN_Pos)); } /** * @brief Return DMA2D foreground green color value, expressed on 8 bits ([7:0] bits). * @rmtoll FGCOLR GREEN LL_DMA2D_FGND_GetGreenColor * @param DMA2Dx DMA2D Instance * @retval Green color value between Min_Data=0 and Max_Data=0xFF */ __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetGreenColor(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->FGCOLR, DMA2D_FGCOLR_GREEN) >> DMA2D_FGCOLR_GREEN_Pos); } /** * @brief Set DMA2D foreground blue color value, expressed on 8 bits ([7:0] bits). * @rmtoll FGCOLR BLUE LL_DMA2D_FGND_SetBlueColor * @param DMA2Dx DMA2D Instance * @param Blue Value between Min_Data=0 and Max_Data=0xFF * @retval None */ __STATIC_INLINE void LL_DMA2D_FGND_SetBlueColor(DMA2D_TypeDef *DMA2Dx, uint32_t Blue) { MODIFY_REG(DMA2Dx->FGCOLR, DMA2D_FGCOLR_BLUE, Blue); } /** * @brief Return DMA2D foreground blue color value, expressed on 8 bits ([7:0] bits). * @rmtoll FGCOLR BLUE LL_DMA2D_FGND_GetBlueColor * @param DMA2Dx DMA2D Instance * @retval Blue color value between Min_Data=0 and Max_Data=0xFF */ __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetBlueColor(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->FGCOLR, DMA2D_FGCOLR_BLUE)); } /** * @brief Set DMA2D foreground CLUT memory address, expressed on 32 bits ([31:0] bits). * @rmtoll FGCMAR MA LL_DMA2D_FGND_SetCLUTMemAddr * @param DMA2Dx DMA2D Instance * @param CLUTMemoryAddress Value between Min_Data=0 and Max_Data=0xFFFFFFFF * @retval None */ __STATIC_INLINE void LL_DMA2D_FGND_SetCLUTMemAddr(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTMemoryAddress) { LL_DMA2D_WriteReg(DMA2Dx, FGCMAR, CLUTMemoryAddress); } /** * @brief Get DMA2D foreground CLUT memory address, expressed on 32 bits ([31:0] bits). * @rmtoll FGCMAR MA LL_DMA2D_FGND_GetCLUTMemAddr * @param DMA2Dx DMA2D Instance * @retval Foreground CLUT memory address value between Min_Data=0 and Max_Data=0xFFFFFFFF */ __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetCLUTMemAddr(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(LL_DMA2D_ReadReg(DMA2Dx, FGCMAR)); } /** * @brief Set DMA2D foreground CLUT size, expressed on 8 bits ([7:0] bits). * @rmtoll FGPFCCR CS LL_DMA2D_FGND_SetCLUTSize * @param DMA2Dx DMA2D Instance * @param CLUTSize Value between Min_Data=0 and Max_Data=0xFF * @retval None */ __STATIC_INLINE void LL_DMA2D_FGND_SetCLUTSize(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTSize) { MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CS, (CLUTSize << DMA2D_FGPFCCR_CS_Pos)); } /** * @brief Get DMA2D foreground CLUT size, expressed on 8 bits ([7:0] bits). * @rmtoll FGPFCCR CS LL_DMA2D_FGND_GetCLUTSize * @param DMA2Dx DMA2D Instance * @retval Foreground CLUT size value between Min_Data=0 and Max_Data=0xFF */ __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetCLUTSize(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CS) >> DMA2D_FGPFCCR_CS_Pos); } /** * @brief Set DMA2D foreground CLUT color mode. * @rmtoll FGPFCCR CCM LL_DMA2D_FGND_SetCLUTColorMode * @param DMA2Dx DMA2D Instance * @param CLUTColorMode This parameter can be one of the following values: * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_ARGB8888 * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_RGB888 * @retval None */ __STATIC_INLINE void LL_DMA2D_FGND_SetCLUTColorMode(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTColorMode) { MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CCM, CLUTColorMode); } /** * @brief Return DMA2D foreground CLUT color mode. * @rmtoll FGPFCCR CCM LL_DMA2D_FGND_GetCLUTColorMode * @param DMA2Dx DMA2D Instance * @retval Returned value can be one of the following values: * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_ARGB8888 * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_RGB888 */ __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetCLUTColorMode(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CCM)); } /** * @} */ /** @defgroup DMA2D_LL_EF_BGND_Configuration Background Configuration Functions * @{ */ /** * @brief Set DMA2D background memory address, expressed on 32 bits ([31:0] bits). * @rmtoll BGMAR MA LL_DMA2D_BGND_SetMemAddr * @param DMA2Dx DMA2D Instance * @param MemoryAddress Value between Min_Data=0 and Max_Data=0xFFFFFFFF * @retval None */ __STATIC_INLINE void LL_DMA2D_BGND_SetMemAddr(DMA2D_TypeDef *DMA2Dx, uint32_t MemoryAddress) { LL_DMA2D_WriteReg(DMA2Dx, BGMAR, MemoryAddress); } /** * @brief Get DMA2D background memory address, expressed on 32 bits ([31:0] bits). * @rmtoll BGMAR MA LL_DMA2D_BGND_GetMemAddr * @param DMA2Dx DMA2D Instance * @retval Background memory address value between Min_Data=0 and Max_Data=0xFFFFFFFF */ __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetMemAddr(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(LL_DMA2D_ReadReg(DMA2Dx, BGMAR)); } /** * @brief Enable DMA2D background CLUT loading. * @rmtoll BGPFCCR START LL_DMA2D_BGND_EnableCLUTLoad * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_BGND_EnableCLUTLoad(DMA2D_TypeDef *DMA2Dx) { SET_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_START); } /** * @brief Indicate if DMA2D background CLUT loading is enabled. * @rmtoll BGPFCCR START LL_DMA2D_BGND_IsEnabledCLUTLoad * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_BGND_IsEnabledCLUTLoad(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_START) == (DMA2D_BGPFCCR_START)); } /** * @brief Set DMA2D background color mode. * @rmtoll BGPFCCR CM LL_DMA2D_BGND_SetColorMode * @param DMA2Dx DMA2D Instance * @param ColorMode This parameter can be one of the following values: * @arg @ref LL_DMA2D_INPUT_MODE_ARGB8888 * @arg @ref LL_DMA2D_INPUT_MODE_RGB888 * @arg @ref LL_DMA2D_INPUT_MODE_RGB565 * @arg @ref LL_DMA2D_INPUT_MODE_ARGB1555 * @arg @ref LL_DMA2D_INPUT_MODE_ARGB4444 * @arg @ref LL_DMA2D_INPUT_MODE_L8 * @arg @ref LL_DMA2D_INPUT_MODE_AL44 * @arg @ref LL_DMA2D_INPUT_MODE_AL88 * @arg @ref LL_DMA2D_INPUT_MODE_L4 * @arg @ref LL_DMA2D_INPUT_MODE_A8 * @arg @ref LL_DMA2D_INPUT_MODE_A4 * @retval None */ __STATIC_INLINE void LL_DMA2D_BGND_SetColorMode(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode) { MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CM, ColorMode); } /** * @brief Return DMA2D background color mode. * @rmtoll BGPFCCR CM LL_DMA2D_BGND_GetColorMode * @param DMA2Dx DMA2D Instance * @retval Returned value can be one of the following values: * @arg @ref LL_DMA2D_INPUT_MODE_ARGB8888 * @arg @ref LL_DMA2D_INPUT_MODE_RGB888 * @arg @ref LL_DMA2D_INPUT_MODE_RGB565 * @arg @ref LL_DMA2D_INPUT_MODE_ARGB1555 * @arg @ref LL_DMA2D_INPUT_MODE_ARGB4444 * @arg @ref LL_DMA2D_INPUT_MODE_L8 * @arg @ref LL_DMA2D_INPUT_MODE_AL44 * @arg @ref LL_DMA2D_INPUT_MODE_AL88 * @arg @ref LL_DMA2D_INPUT_MODE_L4 * @arg @ref LL_DMA2D_INPUT_MODE_A8 * @arg @ref LL_DMA2D_INPUT_MODE_A4 */ __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetColorMode(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CM)); } /** * @brief Set DMA2D background alpha mode. * @rmtoll BGPFCCR AM LL_DMA2D_BGND_SetAlphaMode * @param DMA2Dx DMA2D Instance * @param AphaMode This parameter can be one of the following values: * @arg @ref LL_DMA2D_ALPHA_MODE_NO_MODIF * @arg @ref LL_DMA2D_ALPHA_MODE_REPLACE * @arg @ref LL_DMA2D_ALPHA_MODE_COMBINE * @retval None */ __STATIC_INLINE void LL_DMA2D_BGND_SetAlphaMode(DMA2D_TypeDef *DMA2Dx, uint32_t AphaMode) { MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_AM, AphaMode); } /** * @brief Return DMA2D background alpha mode. * @rmtoll BGPFCCR AM LL_DMA2D_BGND_GetAlphaMode * @param DMA2Dx DMA2D Instance * @retval Returned value can be one of the following values: * @arg @ref LL_DMA2D_ALPHA_MODE_NO_MODIF * @arg @ref LL_DMA2D_ALPHA_MODE_REPLACE * @arg @ref LL_DMA2D_ALPHA_MODE_COMBINE */ __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetAlphaMode(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_AM)); } /** * @brief Set DMA2D background alpha value, expressed on 8 bits ([7:0] bits). * @rmtoll BGPFCCR ALPHA LL_DMA2D_BGND_SetAlpha * @param DMA2Dx DMA2D Instance * @param Alpha Value between Min_Data=0 and Max_Data=0xFF * @retval None */ __STATIC_INLINE void LL_DMA2D_BGND_SetAlpha(DMA2D_TypeDef *DMA2Dx, uint32_t Alpha) { MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_ALPHA, (Alpha << DMA2D_BGPFCCR_ALPHA_Pos)); } /** * @brief Return DMA2D background alpha value, expressed on 8 bits ([7:0] bits). * @rmtoll BGPFCCR ALPHA LL_DMA2D_BGND_GetAlpha * @param DMA2Dx DMA2D Instance * @retval Alpha value between Min_Data=0 and Max_Data=0xFF */ __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetAlpha(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_ALPHA) >> DMA2D_BGPFCCR_ALPHA_Pos); } /** * @brief Set DMA2D background line offset, expressed on 14 bits ([13:0] bits). * @rmtoll BGOR LO LL_DMA2D_BGND_SetLineOffset * @param DMA2Dx DMA2D Instance * @param LineOffset Value between Min_Data=0 and Max_Data=0x3FF * @retval None */ __STATIC_INLINE void LL_DMA2D_BGND_SetLineOffset(DMA2D_TypeDef *DMA2Dx, uint32_t LineOffset) { MODIFY_REG(DMA2Dx->BGOR, DMA2D_BGOR_LO, LineOffset); } /** * @brief Return DMA2D background line offset, expressed on 14 bits ([13:0] bits). * @rmtoll BGOR LO LL_DMA2D_BGND_GetLineOffset * @param DMA2Dx DMA2D Instance * @retval Background line offset value between Min_Data=0 and Max_Data=0x3FF */ __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetLineOffset(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->BGOR, DMA2D_BGOR_LO)); } /** * @brief Set DMA2D background color values, expressed on 24 bits ([23:0] bits). * @rmtoll BGCOLR RED LL_DMA2D_BGND_SetColor * @rmtoll BGCOLR GREEN LL_DMA2D_BGND_SetColor * @rmtoll BGCOLR BLUE LL_DMA2D_BGND_SetColor * @param DMA2Dx DMA2D Instance * @param Red Value between Min_Data=0 and Max_Data=0xFF * @param Green Value between Min_Data=0 and Max_Data=0xFF * @param Blue Value between Min_Data=0 and Max_Data=0xFF * @retval None */ __STATIC_INLINE void LL_DMA2D_BGND_SetColor(DMA2D_TypeDef *DMA2Dx, uint32_t Red, uint32_t Green, uint32_t Blue) { MODIFY_REG(DMA2Dx->BGCOLR, (DMA2D_BGCOLR_RED | DMA2D_BGCOLR_GREEN | DMA2D_BGCOLR_BLUE), \ ((Red << DMA2D_BGCOLR_RED_Pos) | (Green << DMA2D_BGCOLR_GREEN_Pos) | Blue)); } /** * @brief Set DMA2D background red color value, expressed on 8 bits ([7:0] bits). * @rmtoll BGCOLR RED LL_DMA2D_BGND_SetRedColor * @param DMA2Dx DMA2D Instance * @param Red Value between Min_Data=0 and Max_Data=0xFF * @retval None */ __STATIC_INLINE void LL_DMA2D_BGND_SetRedColor(DMA2D_TypeDef *DMA2Dx, uint32_t Red) { MODIFY_REG(DMA2Dx->BGCOLR, DMA2D_BGCOLR_RED, (Red << DMA2D_BGCOLR_RED_Pos)); } /** * @brief Return DMA2D background red color value, expressed on 8 bits ([7:0] bits). * @rmtoll BGCOLR RED LL_DMA2D_BGND_GetRedColor * @param DMA2Dx DMA2D Instance * @retval Red color value between Min_Data=0 and Max_Data=0xFF */ __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetRedColor(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->BGCOLR, DMA2D_BGCOLR_RED) >> DMA2D_BGCOLR_RED_Pos); } /** * @brief Set DMA2D background green color value, expressed on 8 bits ([7:0] bits). * @rmtoll BGCOLR GREEN LL_DMA2D_BGND_SetGreenColor * @param DMA2Dx DMA2D Instance * @param Green Value between Min_Data=0 and Max_Data=0xFF * @retval None */ __STATIC_INLINE void LL_DMA2D_BGND_SetGreenColor(DMA2D_TypeDef *DMA2Dx, uint32_t Green) { MODIFY_REG(DMA2Dx->BGCOLR, DMA2D_BGCOLR_GREEN, (Green << DMA2D_BGCOLR_GREEN_Pos)); } /** * @brief Return DMA2D background green color value, expressed on 8 bits ([7:0] bits). * @rmtoll BGCOLR GREEN LL_DMA2D_BGND_GetGreenColor * @param DMA2Dx DMA2D Instance * @retval Green color value between Min_Data=0 and Max_Data=0xFF */ __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetGreenColor(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->BGCOLR, DMA2D_BGCOLR_GREEN) >> DMA2D_BGCOLR_GREEN_Pos); } /** * @brief Set DMA2D background blue color value, expressed on 8 bits ([7:0] bits). * @rmtoll BGCOLR BLUE LL_DMA2D_BGND_SetBlueColor * @param DMA2Dx DMA2D Instance * @param Blue Value between Min_Data=0 and Max_Data=0xFF * @retval None */ __STATIC_INLINE void LL_DMA2D_BGND_SetBlueColor(DMA2D_TypeDef *DMA2Dx, uint32_t Blue) { MODIFY_REG(DMA2Dx->BGCOLR, DMA2D_BGCOLR_BLUE, Blue); } /** * @brief Return DMA2D background blue color value, expressed on 8 bits ([7:0] bits). * @rmtoll BGCOLR BLUE LL_DMA2D_BGND_GetBlueColor * @param DMA2Dx DMA2D Instance * @retval Blue color value between Min_Data=0 and Max_Data=0xFF */ __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetBlueColor(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->BGCOLR, DMA2D_BGCOLR_BLUE)); } /** * @brief Set DMA2D background CLUT memory address, expressed on 32 bits ([31:0] bits). * @rmtoll BGCMAR MA LL_DMA2D_BGND_SetCLUTMemAddr * @param DMA2Dx DMA2D Instance * @param CLUTMemoryAddress Value between Min_Data=0 and Max_Data=0xFFFFFFFF * @retval None */ __STATIC_INLINE void LL_DMA2D_BGND_SetCLUTMemAddr(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTMemoryAddress) { LL_DMA2D_WriteReg(DMA2Dx, BGCMAR, CLUTMemoryAddress); } /** * @brief Get DMA2D background CLUT memory address, expressed on 32 bits ([31:0] bits). * @rmtoll BGCMAR MA LL_DMA2D_BGND_GetCLUTMemAddr * @param DMA2Dx DMA2D Instance * @retval Background CLUT memory address value between Min_Data=0 and Max_Data=0xFFFFFFFF */ __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetCLUTMemAddr(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(LL_DMA2D_ReadReg(DMA2Dx, BGCMAR)); } /** * @brief Set DMA2D background CLUT size, expressed on 8 bits ([7:0] bits). * @rmtoll BGPFCCR CS LL_DMA2D_BGND_SetCLUTSize * @param DMA2Dx DMA2D Instance * @param CLUTSize Value between Min_Data=0 and Max_Data=0xFF * @retval None */ __STATIC_INLINE void LL_DMA2D_BGND_SetCLUTSize(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTSize) { MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CS, (CLUTSize << DMA2D_BGPFCCR_CS_Pos)); } /** * @brief Get DMA2D background CLUT size, expressed on 8 bits ([7:0] bits). * @rmtoll BGPFCCR CS LL_DMA2D_BGND_GetCLUTSize * @param DMA2Dx DMA2D Instance * @retval Background CLUT size value between Min_Data=0 and Max_Data=0xFF */ __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetCLUTSize(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CS) >> DMA2D_BGPFCCR_CS_Pos); } /** * @brief Set DMA2D background CLUT color mode. * @rmtoll BGPFCCR CCM LL_DMA2D_BGND_SetCLUTColorMode * @param DMA2Dx DMA2D Instance * @param CLUTColorMode This parameter can be one of the following values: * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_ARGB8888 * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_RGB888 * @retval None */ __STATIC_INLINE void LL_DMA2D_BGND_SetCLUTColorMode(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTColorMode) { MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CCM, CLUTColorMode); } /** * @brief Return DMA2D background CLUT color mode. * @rmtoll BGPFCCR CCM LL_DMA2D_BGND_GetCLUTColorMode * @param DMA2Dx DMA2D Instance * @retval Returned value can be one of the following values: * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_ARGB8888 * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_RGB888 */ __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetCLUTColorMode(DMA2D_TypeDef *DMA2Dx) { return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CCM)); } /** * @} */ /** * @} */ /** @defgroup DMA2D_LL_EF_FLAG_MANAGEMENT Flag Management * @{ */ /** * @brief Check if the DMA2D Configuration Error Interrupt Flag is set or not * @rmtoll ISR CEIF LL_DMA2D_IsActiveFlag_CE * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_CE(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->ISR, DMA2D_ISR_CEIF) == (DMA2D_ISR_CEIF)); } /** * @brief Check if the DMA2D CLUT Transfer Complete Interrupt Flag is set or not * @rmtoll ISR CTCIF LL_DMA2D_IsActiveFlag_CTC * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_CTC(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->ISR, DMA2D_ISR_CTCIF) == (DMA2D_ISR_CTCIF)); } /** * @brief Check if the DMA2D CLUT Access Error Interrupt Flag is set or not * @rmtoll ISR CAEIF LL_DMA2D_IsActiveFlag_CAE * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_CAE(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->ISR, DMA2D_ISR_CAEIF) == (DMA2D_ISR_CAEIF)); } /** * @brief Check if the DMA2D Transfer Watermark Interrupt Flag is set or not * @rmtoll ISR TWIF LL_DMA2D_IsActiveFlag_TW * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_TW(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->ISR, DMA2D_ISR_TWIF) == (DMA2D_ISR_TWIF)); } /** * @brief Check if the DMA2D Transfer Complete Interrupt Flag is set or not * @rmtoll ISR TCIF LL_DMA2D_IsActiveFlag_TC * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_TC(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->ISR, DMA2D_ISR_TCIF) == (DMA2D_ISR_TCIF)); } /** * @brief Check if the DMA2D Transfer Error Interrupt Flag is set or not * @rmtoll ISR TEIF LL_DMA2D_IsActiveFlag_TE * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_TE(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->ISR, DMA2D_ISR_TEIF) == (DMA2D_ISR_TEIF)); } /** * @brief Clear DMA2D Configuration Error Interrupt Flag * @rmtoll IFCR CCEIF LL_DMA2D_ClearFlag_CE * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_ClearFlag_CE(DMA2D_TypeDef *DMA2Dx) { WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CCEIF); } /** * @brief Clear DMA2D CLUT Transfer Complete Interrupt Flag * @rmtoll IFCR CCTCIF LL_DMA2D_ClearFlag_CTC * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_ClearFlag_CTC(DMA2D_TypeDef *DMA2Dx) { WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CCTCIF); } /** * @brief Clear DMA2D CLUT Access Error Interrupt Flag * @rmtoll IFCR CAECIF LL_DMA2D_ClearFlag_CAE * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_ClearFlag_CAE(DMA2D_TypeDef *DMA2Dx) { WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CAECIF); } /** * @brief Clear DMA2D Transfer Watermark Interrupt Flag * @rmtoll IFCR CTWIF LL_DMA2D_ClearFlag_TW * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_ClearFlag_TW(DMA2D_TypeDef *DMA2Dx) { WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CTWIF); } /** * @brief Clear DMA2D Transfer Complete Interrupt Flag * @rmtoll IFCR CTCIF LL_DMA2D_ClearFlag_TC * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_ClearFlag_TC(DMA2D_TypeDef *DMA2Dx) { WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CTCIF); } /** * @brief Clear DMA2D Transfer Error Interrupt Flag * @rmtoll IFCR CTEIF LL_DMA2D_ClearFlag_TE * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_ClearFlag_TE(DMA2D_TypeDef *DMA2Dx) { WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CTEIF); } /** * @} */ /** @defgroup DMA2D_LL_EF_IT_MANAGEMENT Interruption Management * @{ */ /** * @brief Enable Configuration Error Interrupt * @rmtoll CR CEIE LL_DMA2D_EnableIT_CE * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_EnableIT_CE(DMA2D_TypeDef *DMA2Dx) { SET_BIT(DMA2Dx->CR, DMA2D_CR_CEIE); } /** * @brief Enable CLUT Transfer Complete Interrupt * @rmtoll CR CTCIE LL_DMA2D_EnableIT_CTC * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_EnableIT_CTC(DMA2D_TypeDef *DMA2Dx) { SET_BIT(DMA2Dx->CR, DMA2D_CR_CTCIE); } /** * @brief Enable CLUT Access Error Interrupt * @rmtoll CR CAEIE LL_DMA2D_EnableIT_CAE * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_EnableIT_CAE(DMA2D_TypeDef *DMA2Dx) { SET_BIT(DMA2Dx->CR, DMA2D_CR_CAEIE); } /** * @brief Enable Transfer Watermark Interrupt * @rmtoll CR TWIE LL_DMA2D_EnableIT_TW * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_EnableIT_TW(DMA2D_TypeDef *DMA2Dx) { SET_BIT(DMA2Dx->CR, DMA2D_CR_TWIE); } /** * @brief Enable Transfer Complete Interrupt * @rmtoll CR TCIE LL_DMA2D_EnableIT_TC * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_EnableIT_TC(DMA2D_TypeDef *DMA2Dx) { SET_BIT(DMA2Dx->CR, DMA2D_CR_TCIE); } /** * @brief Enable Transfer Error Interrupt * @rmtoll CR TEIE LL_DMA2D_EnableIT_TE * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_EnableIT_TE(DMA2D_TypeDef *DMA2Dx) { SET_BIT(DMA2Dx->CR, DMA2D_CR_TEIE); } /** * @brief Disable Configuration Error Interrupt * @rmtoll CR CEIE LL_DMA2D_DisableIT_CE * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_DisableIT_CE(DMA2D_TypeDef *DMA2Dx) { CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_CEIE); } /** * @brief Disable CLUT Transfer Complete Interrupt * @rmtoll CR CTCIE LL_DMA2D_DisableIT_CTC * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_DisableIT_CTC(DMA2D_TypeDef *DMA2Dx) { CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_CTCIE); } /** * @brief Disable CLUT Access Error Interrupt * @rmtoll CR CAEIE LL_DMA2D_DisableIT_CAE * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_DisableIT_CAE(DMA2D_TypeDef *DMA2Dx) { CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_CAEIE); } /** * @brief Disable Transfer Watermark Interrupt * @rmtoll CR TWIE LL_DMA2D_DisableIT_TW * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_DisableIT_TW(DMA2D_TypeDef *DMA2Dx) { CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_TWIE); } /** * @brief Disable Transfer Complete Interrupt * @rmtoll CR TCIE LL_DMA2D_DisableIT_TC * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_DisableIT_TC(DMA2D_TypeDef *DMA2Dx) { CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_TCIE); } /** * @brief Disable Transfer Error Interrupt * @rmtoll CR TEIE LL_DMA2D_DisableIT_TE * @param DMA2Dx DMA2D Instance * @retval None */ __STATIC_INLINE void LL_DMA2D_DisableIT_TE(DMA2D_TypeDef *DMA2Dx) { CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_TEIE); } /** * @brief Check if the DMA2D Configuration Error interrupt source is enabled or disabled. * @rmtoll CR CEIE LL_DMA2D_IsEnabledIT_CE * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_CE(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->CR, DMA2D_CR_CEIE) == (DMA2D_CR_CEIE)); } /** * @brief Check if the DMA2D CLUT Transfer Complete interrupt source is enabled or disabled. * @rmtoll CR CTCIE LL_DMA2D_IsEnabledIT_CTC * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_CTC(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->CR, DMA2D_CR_CTCIE) == (DMA2D_CR_CTCIE)); } /** * @brief Check if the DMA2D CLUT Access Error interrupt source is enabled or disabled. * @rmtoll CR CAEIE LL_DMA2D_IsEnabledIT_CAE * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_CAE(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->CR, DMA2D_CR_CAEIE) == (DMA2D_CR_CAEIE)); } /** * @brief Check if the DMA2D Transfer Watermark interrupt source is enabled or disabled. * @rmtoll CR TWIE LL_DMA2D_IsEnabledIT_TW * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_TW(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->CR, DMA2D_CR_TWIE) == (DMA2D_CR_TWIE)); } /** * @brief Check if the DMA2D Transfer Complete interrupt source is enabled or disabled. * @rmtoll CR TCIE LL_DMA2D_IsEnabledIT_TC * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_TC(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->CR, DMA2D_CR_TCIE) == (DMA2D_CR_TCIE)); } /** * @brief Check if the DMA2D Transfer Error interrupt source is enabled or disabled. * @rmtoll CR TEIE LL_DMA2D_IsEnabledIT_TE * @param DMA2Dx DMA2D Instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_TE(DMA2D_TypeDef *DMA2Dx) { return (READ_BIT(DMA2Dx->CR, DMA2D_CR_TEIE) == (DMA2D_CR_TEIE)); } /** * @} */ #if defined(USE_FULL_LL_DRIVER) /** @defgroup DMA2D_LL_EF_Init_Functions Initialization and De-initialization Functions * @{ */ ErrorStatus LL_DMA2D_DeInit(DMA2D_TypeDef *DMA2Dx); ErrorStatus LL_DMA2D_Init(DMA2D_TypeDef *DMA2Dx, LL_DMA2D_InitTypeDef *DMA2D_InitStruct); void LL_DMA2D_StructInit(LL_DMA2D_InitTypeDef *DMA2D_InitStruct); void LL_DMA2D_ConfigLayer(DMA2D_TypeDef *DMA2Dx, LL_DMA2D_LayerCfgTypeDef *DMA2D_LayerCfg, uint32_t LayerIdx); void LL_DMA2D_LayerCfgStructInit(LL_DMA2D_LayerCfgTypeDef *DMA2D_LayerCfg); void LL_DMA2D_ConfigOutputColor(DMA2D_TypeDef *DMA2Dx, LL_DMA2D_ColorTypeDef *DMA2D_ColorStruct); uint32_t LL_DMA2D_GetOutputBlueColor(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode); uint32_t LL_DMA2D_GetOutputGreenColor(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode); uint32_t LL_DMA2D_GetOutputRedColor(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode); uint32_t LL_DMA2D_GetOutputAlphaColor(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode); void LL_DMA2D_ConfigSize(DMA2D_TypeDef *DMA2Dx, uint32_t NbrOfLines, uint32_t NbrOfPixelsPerLines); /** * @} */ #endif /* USE_FULL_LL_DRIVER */ /** * @} */ /** * @} */ #endif /* defined (DMA2D) */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32F4xx_LL_DMA2D_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/