Mercurial > public > ostc4
view Common/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spdifrx.h @ 511:5185ade91096
Minor adaptions in page layout:
WindowLineSpacing was used to establish a small separation from y0. This caused problems in string visualization (line > 1). To avoid the the window parameters have been adapted and WindowLineSpacing set to an value allowing two lines of data
Removed instrumentation for BigFon_V2
author | Ideenmodellierer |
---|---|
date | Sun, 30 Aug 2020 17:30:54 +0200 |
parents | c78bcbd5deda |
children |
line wrap: on
line source
/** ****************************************************************************** * @file stm32f4xx_hal_spdifrx.h * @author MCD Application Team * @brief Header file of SPDIFRX HAL module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_SPDIFRX_H #define __STM32F4xx_HAL_SPDIFRX_H #ifdef __cplusplus extern "C" { #endif #if defined(STM32F446xx) /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal_def.h" /** @addtogroup STM32F4xx_HAL_Driver * @{ */ /** @addtogroup SPDIFRX * @{ */ /* Exported types ------------------------------------------------------------*/ /** @defgroup SPDIFRX_Exported_Types SPDIFRX Exported Types * @{ */ /** * @brief SPDIFRX Init structure definition */ typedef struct { uint32_t InputSelection; /*!< Specifies the SPDIF input selection. This parameter can be a value of @ref SPDIFRX_Input_Selection */ uint32_t Retries; /*!< Specifies the Maximum allowed re-tries during synchronization phase. This parameter can be a value of @ref SPDIFRX_Max_Retries */ uint32_t WaitForActivity; /*!< Specifies the wait for activity on SPDIF selected input. This parameter can be a value of @ref SPDIFRX_Wait_For_Activity. */ uint32_t ChannelSelection; /*!< Specifies whether the control flow will take the channel status from channel A or B. This parameter can be a value of @ref SPDIFRX_Channel_Selection */ uint32_t DataFormat; /*!< Specifies the Data samples format (LSB, MSB, ...). This parameter can be a value of @ref SPDIFRX_Data_Format */ uint32_t StereoMode; /*!< Specifies whether the peripheral is in stereo or mono mode. This parameter can be a value of @ref SPDIFRX_Stereo_Mode */ uint32_t PreambleTypeMask; /*!< Specifies whether The preamble type bits are copied or not into the received frame. This parameter can be a value of @ref SPDIFRX_PT_Mask */ uint32_t ChannelStatusMask; /*!< Specifies whether the channel status and user bits are copied or not into the received frame. This parameter can be a value of @ref SPDIFRX_ChannelStatus_Mask */ uint32_t ValidityBitMask; /*!< Specifies whether the validity bit is copied or not into the received frame. This parameter can be a value of @ref SPDIFRX_V_Mask */ uint32_t ParityErrorMask; /*!< Specifies whether the parity error bit is copied or not into the received frame. This parameter can be a value of @ref SPDIFRX_PE_Mask */ }SPDIFRX_InitTypeDef; /** * @brief SPDIFRX SetDataFormat structure definition */ typedef struct { uint32_t DataFormat; /*!< Specifies the Data samples format (LSB, MSB, ...). This parameter can be a value of @ref SPDIFRX_Data_Format */ uint32_t StereoMode; /*!< Specifies whether the peripheral is in stereo or mono mode. This parameter can be a value of @ref SPDIFRX_Stereo_Mode */ uint32_t PreambleTypeMask; /*!< Specifies whether The preamble type bits are copied or not into the received frame. This parameter can be a value of @ref SPDIFRX_PT_Mask */ uint32_t ChannelStatusMask; /*!< Specifies whether the channel status and user bits are copied or not into the received frame. This parameter can be a value of @ref SPDIFRX_ChannelStatus_Mask */ uint32_t ValidityBitMask; /*!< Specifies whether the validity bit is copied or not into the received frame. This parameter can be a value of @ref SPDIFRX_V_Mask */ uint32_t ParityErrorMask; /*!< Specifies whether the parity error bit is copied or not into the received frame. This parameter can be a value of @ref SPDIFRX_PE_Mask */ }SPDIFRX_SetDataFormatTypeDef; /** * @brief HAL State structures definition */ typedef enum { HAL_SPDIFRX_STATE_RESET = 0x00U, /*!< SPDIFRX not yet initialized or disabled */ HAL_SPDIFRX_STATE_READY = 0x01U, /*!< SPDIFRX initialized and ready for use */ HAL_SPDIFRX_STATE_BUSY = 0x02U, /*!< SPDIFRX internal process is ongoing */ HAL_SPDIFRX_STATE_BUSY_RX = 0x03U, /*!< SPDIFRX internal Data Flow RX process is ongoing */ HAL_SPDIFRX_STATE_BUSY_CX = 0x04U, /*!< SPDIFRX internal Control Flow RX process is ongoing */ HAL_SPDIFRX_STATE_ERROR = 0x07U /*!< SPDIFRX error state */ }HAL_SPDIFRX_StateTypeDef; /** * @brief SPDIFRX handle Structure definition */ typedef struct { SPDIFRX_TypeDef *Instance; /* SPDIFRX registers base address */ SPDIFRX_InitTypeDef Init; /* SPDIFRX communication parameters */ uint32_t *pRxBuffPtr; /* Pointer to SPDIFRX Rx transfer buffer */ uint32_t *pCsBuffPtr; /* Pointer to SPDIFRX Cx transfer buffer */ __IO uint16_t RxXferSize; /* SPDIFRX Rx transfer size */ __IO uint16_t RxXferCount; /* SPDIFRX Rx transfer counter (This field is initialized at the same value as transfer size at the beginning of the transfer and decremented when a sample is received. NbSamplesReceived = RxBufferSize-RxBufferCount) */ __IO uint16_t CsXferSize; /* SPDIFRX Rx transfer size */ __IO uint16_t CsXferCount; /* SPDIFRX Rx transfer counter (This field is initialized at the same value as transfer size at the beginning of the transfer and decremented when a sample is received. NbSamplesReceived = RxBufferSize-RxBufferCount) */ DMA_HandleTypeDef *hdmaCsRx; /* SPDIFRX EC60958_channel_status and user_information DMA handle parameters */ DMA_HandleTypeDef *hdmaDrRx; /* SPDIFRX Rx DMA handle parameters */ __IO HAL_LockTypeDef Lock; /* SPDIFRX locking object */ __IO HAL_SPDIFRX_StateTypeDef State; /* SPDIFRX communication state */ __IO uint32_t ErrorCode; /* SPDIFRX Error code */ }SPDIFRX_HandleTypeDef; /** * @} */ /* Exported constants --------------------------------------------------------*/ /** @defgroup SPDIFRX_Exported_Constants SPDIFRX Exported Constants * @{ */ /** @defgroup SPDIFRX_ErrorCode SPDIFRX Error Code * @{ */ #define HAL_SPDIFRX_ERROR_NONE 0x00000000U /*!< No error */ #define HAL_SPDIFRX_ERROR_TIMEOUT 0x00000001U /*!< Timeout error */ #define HAL_SPDIFRX_ERROR_OVR 0x00000002U /*!< OVR error */ #define HAL_SPDIFRX_ERROR_PE 0x00000004U /*!< Parity error */ #define HAL_SPDIFRX_ERROR_DMA 0x00000008U /*!< DMA transfer error */ #define HAL_SPDIFRX_ERROR_UNKNOWN 0x00000010U /*!< Unknown Error error */ /** * @} */ /** @defgroup SPDIFRX_Input_Selection SPDIFRX Input Selection * @{ */ #define SPDIFRX_INPUT_IN0 0x00000000U #define SPDIFRX_INPUT_IN1 0x00010000U #define SPDIFRX_INPUT_IN2 0x00020000U #define SPDIFRX_INPUT_IN3 0x00030000U /** * @} */ /** @defgroup SPDIFRX_Max_Retries SPDIFRX Maximum Retries * @{ */ #define SPDIFRX_MAXRETRIES_NONE 0x00000000U #define SPDIFRX_MAXRETRIES_3 0x00001000U #define SPDIFRX_MAXRETRIES_15 0x00002000U #define SPDIFRX_MAXRETRIES_63 0x00003000U /** * @} */ /** @defgroup SPDIFRX_Wait_For_Activity SPDIFRX Wait For Activity * @{ */ #define SPDIFRX_WAITFORACTIVITY_OFF 0x00000000U #define SPDIFRX_WAITFORACTIVITY_ON ((uint32_t)SPDIFRX_CR_WFA) /** * @} */ /** @defgroup SPDIFRX_PT_Mask SPDIFRX Preamble Type Mask * @{ */ #define SPDIFRX_PREAMBLETYPEMASK_OFF 0x00000000U #define SPDIFRX_PREAMBLETYPEMASK_ON ((uint32_t)SPDIFRX_CR_PTMSK) /** * @} */ /** @defgroup SPDIFRX_ChannelStatus_Mask SPDIFRX Channel Status Mask * @{ */ #define SPDIFRX_CHANNELSTATUS_OFF 0x00000000U /* The channel status and user bits are copied into the SPDIF_DR */ #define SPDIFRX_CHANNELSTATUS_ON ((uint32_t)SPDIFRX_CR_CUMSK) /* The channel status and user bits are not copied into the SPDIF_DR, zeros are written instead*/ /** * @} */ /** @defgroup SPDIFRX_V_Mask SPDIFRX Validity Mask * @{ */ #define SPDIFRX_VALIDITYMASK_OFF 0x00000000U #define SPDIFRX_VALIDITYMASK_ON ((uint32_t)SPDIFRX_CR_VMSK) /** * @} */ /** @defgroup SPDIFRX_PE_Mask SPDIFRX Parity Error Mask * @{ */ #define SPDIFRX_PARITYERRORMASK_OFF 0x00000000U #define SPDIFRX_PARITYERRORMASK_ON ((uint32_t)SPDIFRX_CR_PMSK) /** * @} */ /** @defgroup SPDIFRX_Channel_Selection SPDIFRX Channel Selection * @{ */ #define SPDIFRX_CHANNEL_A 0x00000000U #define SPDIFRX_CHANNEL_B ((uint32_t)SPDIFRX_CR_CHSEL) /** * @} */ /** @defgroup SPDIFRX_Data_Format SPDIFRX Data Format * @{ */ #define SPDIFRX_DATAFORMAT_LSB 0x00000000U #define SPDIFRX_DATAFORMAT_MSB 0x00000010U #define SPDIFRX_DATAFORMAT_32BITS 0x00000020U /** * @} */ /** @defgroup SPDIFRX_Stereo_Mode SPDIFRX Stereo Mode * @{ */ #define SPDIFRX_STEREOMODE_DISABLE 0x00000000U #define SPDIFRX_STEREOMODE_ENABLE ((uint32_t)SPDIFRX_CR_RXSTEO) /** * @} */ /** @defgroup SPDIFRX_State SPDIFRX State * @{ */ #define SPDIFRX_STATE_IDLE 0xFFFFFFFCU #define SPDIFRX_STATE_SYNC 0x00000001U #define SPDIFRX_STATE_RCV ((uint32_t)SPDIFRX_CR_SPDIFEN) /** * @} */ /** @defgroup SPDIFRX_Interrupts_Definition SPDIFRX Interrupts Definition * @{ */ #define SPDIFRX_IT_RXNE ((uint32_t)SPDIFRX_IMR_RXNEIE) #define SPDIFRX_IT_CSRNE ((uint32_t)SPDIFRX_IMR_CSRNEIE) #define SPDIFRX_IT_PERRIE ((uint32_t)SPDIFRX_IMR_PERRIE) #define SPDIFRX_IT_OVRIE ((uint32_t)SPDIFRX_IMR_OVRIE) #define SPDIFRX_IT_SBLKIE ((uint32_t)SPDIFRX_IMR_SBLKIE) #define SPDIFRX_IT_SYNCDIE ((uint32_t)SPDIFRX_IMR_SYNCDIE) #define SPDIFRX_IT_IFEIE ((uint32_t)SPDIFRX_IMR_IFEIE ) /** * @} */ /** @defgroup SPDIFRX_Flags_Definition SPDIFRX Flags Definition * @{ */ #define SPDIFRX_FLAG_RXNE ((uint32_t)SPDIFRX_SR_RXNE) #define SPDIFRX_FLAG_CSRNE ((uint32_t)SPDIFRX_SR_CSRNE) #define SPDIFRX_FLAG_PERR ((uint32_t)SPDIFRX_SR_PERR) #define SPDIFRX_FLAG_OVR ((uint32_t)SPDIFRX_SR_OVR) #define SPDIFRX_FLAG_SBD ((uint32_t)SPDIFRX_SR_SBD) #define SPDIFRX_FLAG_SYNCD ((uint32_t)SPDIFRX_SR_SYNCD) #define SPDIFRX_FLAG_FERR ((uint32_t)SPDIFRX_SR_FERR) #define SPDIFRX_FLAG_SERR ((uint32_t)SPDIFRX_SR_SERR) #define SPDIFRX_FLAG_TERR ((uint32_t)SPDIFRX_SR_TERR) /** * @} */ /** * @} */ /* Exported macros -----------------------------------------------------------*/ /** @defgroup SPDIFRX_Exported_macros SPDIFRX Exported Macros * @{ */ /** @brief Reset SPDIFRX handle state * @param __HANDLE__ SPDIFRX handle. * @retval None */ #define __HAL_SPDIFRX_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = (uint16_t)SPDIFRX_CR_SPDIFEN) /** @brief Disable the specified SPDIFRX peripheral (IDLE State). * @param __HANDLE__ specifies the SPDIFRX Handle. * @retval None */ #define __HAL_SPDIFRX_IDLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= SPDIFRX_STATE_IDLE) /** @brief Enable the specified SPDIFRX peripheral (SYNC State). * @param __HANDLE__ specifies the SPDIFRX Handle. * @retval None */ #define __HAL_SPDIFRX_SYNC(__HANDLE__) ((__HANDLE__)->Instance->CR |= SPDIFRX_STATE_SYNC) /** @brief Enable the specified SPDIFRX peripheral (RCV State). * @param __HANDLE__ specifies the SPDIFRX Handle. * @retval None */ #define __HAL_SPDIFRX_RCV(__HANDLE__) ((__HANDLE__)->Instance->CR |= SPDIFRX_STATE_RCV) /** @brief Enable or disable the specified SPDIFRX interrupts. * @param __HANDLE__ specifies the SPDIFRX Handle. * @param __INTERRUPT__ specifies the interrupt source to enable or disable. * This parameter can be one of the following values: * @arg SPDIFRX_IT_RXNE * @arg SPDIFRX_IT_CSRNE * @arg SPDIFRX_IT_PERRIE * @arg SPDIFRX_IT_OVRIE * @arg SPDIFRX_IT_SBLKIE * @arg SPDIFRX_IT_SYNCDIE * @arg SPDIFRX_IT_IFEIE * @retval None */ #define __HAL_SPDIFRX_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR |= (__INTERRUPT__)) #define __HAL_SPDIFRX_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR &= (uint16_t)(~(__INTERRUPT__))) /** @brief Checks if the specified SPDIFRX interrupt source is enabled or disabled. * @param __HANDLE__ specifies the SPDIFRX Handle. * @param __INTERRUPT__ specifies the SPDIFRX interrupt source to check. * This parameter can be one of the following values: * @arg SPDIFRX_IT_RXNE * @arg SPDIFRX_IT_CSRNE * @arg SPDIFRX_IT_PERRIE * @arg SPDIFRX_IT_OVRIE * @arg SPDIFRX_IT_SBLKIE * @arg SPDIFRX_IT_SYNCDIE * @arg SPDIFRX_IT_IFEIE * @retval The new state of __IT__ (TRUE or FALSE). */ #define __HAL_SPDIFRX_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IMR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) /** @brief Checks whether the specified SPDIFRX flag is set or not. * @param __HANDLE__ specifies the SPDIFRX Handle. * @param __FLAG__ specifies the flag to check. * This parameter can be one of the following values: * @arg SPDIFRX_FLAG_RXNE * @arg SPDIFRX_FLAG_CSRNE * @arg SPDIFRX_FLAG_PERR * @arg SPDIFRX_FLAG_OVR * @arg SPDIFRX_FLAG_SBD * @arg SPDIFRX_FLAG_SYNCD * @arg SPDIFRX_FLAG_FERR * @arg SPDIFRX_FLAG_SERR * @arg SPDIFRX_FLAG_TERR * @retval The new state of __FLAG__ (TRUE or FALSE). */ #define __HAL_SPDIFRX_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) /** @brief Clears the specified SPDIFRX SR flag, in setting the proper IFCR register bit. * @param __HANDLE__ specifies the USART Handle. * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set * to clear the corresponding interrupt * This parameter can be one of the following values: * @arg SPDIFRX_FLAG_PERR * @arg SPDIFRX_FLAG_OVR * @arg SPDIFRX_SR_SBD * @arg SPDIFRX_SR_SYNCD * @retval None */ #define __HAL_SPDIFRX_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->IFCR = (uint32_t)(__IT_CLEAR__)) /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @addtogroup SPDIFRX_Exported_Functions * @{ */ /** @addtogroup SPDIFRX_Exported_Functions_Group1 * @{ */ /* Initialization/de-initialization functions **********************************/ HAL_StatusTypeDef HAL_SPDIFRX_Init(SPDIFRX_HandleTypeDef *hspdif); HAL_StatusTypeDef HAL_SPDIFRX_DeInit (SPDIFRX_HandleTypeDef *hspdif); void HAL_SPDIFRX_MspInit(SPDIFRX_HandleTypeDef *hspdif); void HAL_SPDIFRX_MspDeInit(SPDIFRX_HandleTypeDef *hspdif); HAL_StatusTypeDef HAL_SPDIFRX_SetDataFormat(SPDIFRX_HandleTypeDef *hspdif, SPDIFRX_SetDataFormatTypeDef sDataFormat); /** * @} */ /** @addtogroup SPDIFRX_Exported_Functions_Group2 * @{ */ /* I/O operation functions ***************************************************/ /* Blocking mode: Polling */ HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout); HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout); /* Non-Blocking mode: Interrupt */ HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size); HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size); void HAL_SPDIFRX_IRQHandler(SPDIFRX_HandleTypeDef *hspdif); /* Non-Blocking mode: DMA */ HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size); HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size); HAL_StatusTypeDef HAL_SPDIFRX_DMAStop(SPDIFRX_HandleTypeDef *hspdif); /* Callbacks used in non blocking modes (Interrupt and DMA) *******************/ void HAL_SPDIFRX_RxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif); void HAL_SPDIFRX_RxCpltCallback(SPDIFRX_HandleTypeDef *hspdif); void HAL_SPDIFRX_ErrorCallback(SPDIFRX_HandleTypeDef *hspdif); void HAL_SPDIFRX_CxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif); void HAL_SPDIFRX_CxCpltCallback(SPDIFRX_HandleTypeDef *hspdif); /** * @} */ /** @addtogroup SPDIFRX_Exported_Functions_Group3 * @{ */ /* Peripheral Control and State functions ************************************/ HAL_SPDIFRX_StateTypeDef HAL_SPDIFRX_GetState(SPDIFRX_HandleTypeDef *hspdif); uint32_t HAL_SPDIFRX_GetError(SPDIFRX_HandleTypeDef *hspdif); /** * @} */ /** * @} */ /* Private types -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private constants ---------------------------------------------------------*/ /* Private macros ------------------------------------------------------------*/ /** @defgroup SPDIFRX_Private_Macros SPDIFRX Private Macros * @{ */ #define IS_SPDIFRX_INPUT_SELECT(INPUT) (((INPUT) == SPDIFRX_INPUT_IN1) || \ ((INPUT) == SPDIFRX_INPUT_IN2) || \ ((INPUT) == SPDIFRX_INPUT_IN3) || \ ((INPUT) == SPDIFRX_INPUT_IN0)) #define IS_SPDIFRX_MAX_RETRIES(RET) (((RET) == SPDIFRX_MAXRETRIES_NONE) || \ ((RET) == SPDIFRX_MAXRETRIES_3) || \ ((RET) == SPDIFRX_MAXRETRIES_15) || \ ((RET) == SPDIFRX_MAXRETRIES_63)) #define IS_SPDIFRX_WAIT_FOR_ACTIVITY(VAL) (((VAL) == SPDIFRX_WAITFORACTIVITY_ON) || \ ((VAL) == SPDIFRX_WAITFORACTIVITY_OFF)) #define IS_PREAMBLE_TYPE_MASK(VAL) (((VAL) == SPDIFRX_PREAMBLETYPEMASK_ON) || \ ((VAL) == SPDIFRX_PREAMBLETYPEMASK_OFF)) #define IS_VALIDITY_MASK(VAL) (((VAL) == SPDIFRX_VALIDITYMASK_OFF) || \ ((VAL) == SPDIFRX_VALIDITYMASK_ON)) #define IS_PARITY_ERROR_MASK(VAL) (((VAL) == SPDIFRX_PARITYERRORMASK_OFF) || \ ((VAL) == SPDIFRX_PARITYERRORMASK_ON)) #define IS_SPDIFRX_CHANNEL(CHANNEL) (((CHANNEL) == SPDIFRX_CHANNEL_A) || \ ((CHANNEL) == SPDIFRX_CHANNEL_B)) #define IS_SPDIFRX_DATA_FORMAT(FORMAT) (((FORMAT) == SPDIFRX_DATAFORMAT_LSB) || \ ((FORMAT) == SPDIFRX_DATAFORMAT_MSB) || \ ((FORMAT) == SPDIFRX_DATAFORMAT_32BITS)) #define IS_STEREO_MODE(MODE) (((MODE) == SPDIFRX_STEREOMODE_DISABLE) || \ ((MODE) == SPDIFRX_STEREOMODE_ENABLE)) #define IS_CHANNEL_STATUS_MASK(VAL) (((VAL) == SPDIFRX_CHANNELSTATUS_ON) || \ ((VAL) == SPDIFRX_CHANNELSTATUS_OFF)) /** * @} */ /* Private functions ---------------------------------------------------------*/ /** @defgroup SPDIFRX_Private_Functions SPDIFRX Private Functions * @{ */ /** * @} */ /** * @} */ /** * @} */ #endif /* STM32F446xx */ #ifdef __cplusplus } #endif #endif /* __STM32F4xx_HAL_SPDIFRX_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/