view Documentations/dump-disc.cfg @ 643:5149cd644fbc

Reimplemented charger status generation (deactivated): Sometimes the original implementation never reached the state fully charged for unknown reason. The code already contained a function which set the status to fully charger even it was not signaled by the charger (in case voltage is > 4.1V). The new implementation changed the handling of the detection and the OSTC showing the problem now reaches the fully charger status. As the new implementation is still under test it is deactivated => original implementation is active per default
author Ideenmodellierer
date Wed, 24 Mar 2021 22:06:00 +0100
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f427IIT6
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

puts "Flash banks:"
flash banks

#puts "Reading FIRMWARE..."
# Requires OpenOCD 0.10.0 / released January 2017 ?
#flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000

#puts "Done."
exit