Mercurial > public > ostc4
view Common/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai_ex.c @ 728:5143e927219f
Added sensor map to Firmware <=> RTE inferface:
The sensor map contains a list of up to five sensors which may be connected to the external interface. The update includes the definition of the type as well as the data structure. to ensure compatibility the RTE and needed RTE version has been set to 3.0
author | Ideenmodellierer |
---|---|
date | Sat, 14 Jan 2023 20:41:36 +0100 |
parents | c78bcbd5deda |
children |
line wrap: on
line source
/** ****************************************************************************** * @file stm32f4xx_hal_sai_ex.c * @author MCD Application Team * @brief SAI Extension HAL module driver. * This file provides firmware functions to manage the following * functionalities of SAI extension peripheral: * + Extension features functions * @verbatim ============================================================================== ##### SAI peripheral extension features ##### ============================================================================== [..] Comparing to other previous devices, the SAI interface for STM32F446xx devices contains the following additional features : (+) Possibility to be clocked from PLLR ##### How to use this driver ##### ============================================================================== [..] This driver provides functions to manage several sources to clock SAI @endverbatim ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal.h" /** @addtogroup STM32F4xx_HAL_Driver * @{ */ /** @defgroup SAIEx SAIEx * @brief SAI Extension HAL module driver * @{ */ #ifdef HAL_SAI_MODULE_ENABLED #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F413xx) || \ defined(STM32F423xx) /* Private typedef -----------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/ /* SAI registers Masks */ /* Private macro -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private function prototypes -----------------------------------------------*/ /* Private functions ---------------------------------------------------------*/ /** @defgroup SAI_Private_Functions SAI Private Functions * @{ */ /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @defgroup SAIEx_Exported_Functions SAI Extended Exported Functions * @{ */ /** @defgroup SAIEx_Exported_Functions_Group1 Extension features functions * @brief Extension features functions * @verbatim =============================================================================== ##### Extension features Functions ##### =============================================================================== [..] This subsection provides a set of functions allowing to manage the possible SAI clock sources. @endverbatim * @{ */ /** * @brief Configure SAI Block synchronization mode * @param hsai pointer to a SAI_HandleTypeDef structure that contains * the configuration information for SAI module. * @retval SAI Clock Input */ void SAI_BlockSynchroConfig(SAI_HandleTypeDef *hsai) { uint32_t tmpregisterGCR = 0U; #if defined(STM32F446xx) /* This setting must be done with both audio block (A & B) disabled */ switch(hsai->Init.SynchroExt) { case SAI_SYNCEXT_DISABLE : tmpregisterGCR = 0U; break; case SAI_SYNCEXT_OUTBLOCKA_ENABLE : tmpregisterGCR = SAI_GCR_SYNCOUT_0; break; case SAI_SYNCEXT_OUTBLOCKB_ENABLE : tmpregisterGCR = SAI_GCR_SYNCOUT_1; break; default: break; } if((hsai->Init.Synchro) == SAI_SYNCHRONOUS_EXT_SAI2) { tmpregisterGCR |= SAI_GCR_SYNCIN_0; } if((hsai->Instance == SAI1_Block_A) || (hsai->Instance == SAI1_Block_B)) { SAI1->GCR = tmpregisterGCR; } else { SAI2->GCR = tmpregisterGCR; } #endif /* STM32F446xx */ #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F413xx) || defined(STM32F423xx) /* This setting must be done with both audio block (A & B) disabled */ switch(hsai->Init.SynchroExt) { case SAI_SYNCEXT_DISABLE : tmpregisterGCR = 0U; break; case SAI_SYNCEXT_OUTBLOCKA_ENABLE : tmpregisterGCR = SAI_GCR_SYNCOUT_0; break; case SAI_SYNCEXT_OUTBLOCKB_ENABLE : tmpregisterGCR = SAI_GCR_SYNCOUT_1; break; default: break; } SAI1->GCR = tmpregisterGCR; #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx || STM32F413xx || STM32F423xx */ } /** * @brief Get SAI Input Clock based on SAI source clock selection * @param hsai pointer to a SAI_HandleTypeDef structure that contains * the configuration information for SAI module. * @retval SAI Clock Input */ uint32_t SAI_GetInputClock(SAI_HandleTypeDef *hsai) { /* This variable used to store the SAI_CK_x (value in Hz) */ uint32_t saiclocksource = 0U; #if defined(STM32F446xx) if ((hsai->Instance == SAI1_Block_A) || (hsai->Instance == SAI1_Block_B)) { saiclocksource = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SAI1); } else /* SAI2_Block_A || SAI2_Block_B*/ { saiclocksource = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SAI2); } #endif /* STM32F446xx */ #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F413xx) || defined(STM32F423xx) uint32_t vcoinput = 0U, tmpreg = 0U; /* Check the SAI Block parameters */ assert_param(IS_SAI_CLK_SOURCE(hsai->Init.ClockSource)); /* SAI Block clock source selection */ if(hsai->Instance == SAI1_Block_A) { __HAL_RCC_SAI_BLOCKACLKSOURCE_CONFIG(hsai->Init.ClockSource); } else { __HAL_RCC_SAI_BLOCKBCLKSOURCE_CONFIG((uint32_t)(hsai->Init.ClockSource << 2U)); } /* VCO Input Clock value calculation */ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI) { /* In Case the PLL Source is HSI (Internal Clock) */ vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); } else { /* In Case the PLL Source is HSE (External Clock) */ vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM))); } #if defined(STM32F413xx) || defined(STM32F423xx) /* SAI_CLK_x : SAI Block Clock configuration for different clock sources selected */ if(hsai->Init.ClockSource == SAI_CLKSOURCE_PLLR) { /* Configure the PLLI2S division factor */ /* PLL_VCO Input = PLL_SOURCE/PLLM */ /* PLL_VCO Output = PLL_VCO Input * PLLN */ /* SAI_CLK(first level) = PLL_VCO Output/PLLR */ tmpreg = (RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28U; saiclocksource = (vcoinput * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6U))/(tmpreg); /* SAI_CLK_x = SAI_CLK(first level)/PLLDIVR */ tmpreg = (((RCC->DCKCFGR & RCC_DCKCFGR_PLLDIVR) >> 8U) + 1U); saiclocksource = saiclocksource/(tmpreg); } else if(hsai->Init.ClockSource == SAI_CLKSOURCE_PLLI2S) { /* Configure the PLLI2S division factor */ /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */ /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SR */ tmpreg = (RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U; saiclocksource = (vcoinput * ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U))/(tmpreg); /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVR */ tmpreg = ((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVR) + 1U); saiclocksource = saiclocksource/(tmpreg); } else if(hsai->Init.ClockSource == SAI_CLKSOURCE_HS) { if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) { /* Get the I2S source clock value */ saiclocksource = (uint32_t)(HSE_VALUE); } else { /* Get the I2S source clock value */ saiclocksource = (uint32_t)(HSI_VALUE); } } else /* sConfig->ClockSource == SAI_CLKSource_Ext */ { saiclocksource = EXTERNAL_CLOCK_VALUE; } #else /* SAI_CLK_x : SAI Block Clock configuration for different clock sources selected */ if(hsai->Init.ClockSource == SAI_CLKSOURCE_PLLSAI) { /* Configure the PLLI2S division factor */ /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */ tmpreg = (RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> 24U; saiclocksource = (vcoinput * ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> 6U))/(tmpreg); /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */ tmpreg = (((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> 8U) + 1U); saiclocksource = saiclocksource/(tmpreg); } else if(hsai->Init.ClockSource == SAI_CLKSOURCE_PLLI2S) { /* Configure the PLLI2S division factor */ /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */ /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */ tmpreg = (RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> 24U; saiclocksource = (vcoinput * ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U))/(tmpreg); /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */ tmpreg = ((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) + 1U); saiclocksource = saiclocksource/(tmpreg); } else /* sConfig->ClockSource == SAI_CLKSource_Ext */ { /* Enable the External Clock selection */ __HAL_RCC_I2S_CONFIG(RCC_I2SCLKSOURCE_EXT); saiclocksource = EXTERNAL_CLOCK_VALUE; } #endif /* STM32F413xx || STM32F423xx */ #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx || STM32F413xx || STM32F423xx */ /* the return result is the value of SAI clock */ return saiclocksource; } /** * @} */ /** * @} */ #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F413xx || STM32F423xx */ #endif /* HAL_SAI_MODULE_ENABLED */ /** * @} */ /** * @} */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/