Mercurial > public > ostc4
view ostc4pack/src/checksum_final_add_fletcher.cpp @ 328:4fe5400567e7 I2C_Improvment
Set I2C speed to 88kHz, use digital filter only and reworked idle clock recovery
The errata describes a possible problem in operation between 88kHz and 100kHz => Set speed as recommended as work around.
Based on reference implementation only one filter should be use. Choice was digital because only drawback is lag of wakeup functionality which is not used
I2C communication may be randomly interrupted e.g. by a RTE reset or firmware update => reworked recovery function to get I2C devices in idle state again (Clk and SDA HIGH)
author | ideenmodellierer |
---|---|
date | Wed, 17 Jul 2019 22:42:15 +0200 |
parents | 1e707b34667e |
children | 01f40cb1057e |
line wrap: on
line source
#include <iostream> #include <stdlib.h> #include <stdio.h> #include <string.h> #include <time.h> void fletcher16(unsigned char *result1, unsigned char *result2, unsigned char const *data, size_t bytes ) { unsigned short sum1 = 0xff, sum2 = 0xff; size_t tlen; while (bytes) { tlen = bytes >= 20 ? 20 : bytes; bytes -= tlen; do { sum2 += sum1 += *data++; } while (--tlen); sum1 = (sum1 & 0xff) + (sum1 >> 8); sum2 = (sum2 & 0xff) + (sum2 >> 8); } /* Second reduction step to reduce sums to 8 bits */ sum1 = (sum1 & 0xff) + (sum1 >> 8); sum2 = (sum2 & 0xff) + (sum2 >> 8); *result2 = (sum2 & 0xff); *result1 = (sum1 & 0xff); // return sum2 << 8 | sum1; } // This is a variant of fletcher16 with a 16 bit sum instead of an 8 bit sum, // and modulo 2^16 instead of 2^16-1 void hw_ostc3_firmware_checksum (unsigned char *result1, unsigned char *result2, unsigned char *result3, unsigned char *result4, unsigned char const *data, size_t bytes ) { unsigned short low = 0; unsigned short high = 0; for (unsigned int i = 0; i < bytes; i++) { low += data[i]; high += low; } *result1 = (low & 0xff); *result2 = (low/256 & 0xff); *result3 = (unsigned char)(high & 0xff); *result4 = (unsigned char)((high/256) & 0xff); // return (((unsigned int)high) << 16) + low; } int main(int argc, char** argv) { FILE *fp, * fpout; size_t lenTotal,lenTemp; unsigned char buf[2000000]; char *file = argv[1]; char *file2 = argv[2]; char *file3 = argv[3]; unsigned int pruefsumme; unsigned char buf2[4]; printf("1: %s\n", file); printf("2: %s\n", file2); printf("3: %s\n", file3); printf("\n"); //write File with length and cheksum char filename[500], filenameout[510] ; sprintf(filename,"%s",file); int filelength = strlen(filename); filename[filelength -4] = 0; lenTotal = 0; if (NULL == (fp = fopen(file, "rb"))) { printf("Unable to open %s for reading\n", file); return -1; } lenTemp = fread(&buf[lenTotal], sizeof(char), sizeof(buf), fp); // lenTemp = fread(buf, sizeof(char), sizeof(buf), fp); lenTotal = lenTemp; printf("%d bytes read (hex: %#x )\n", lenTemp,lenTemp); fclose(fp); if(file2) { if (NULL == (fp = fopen(file2, "rb"))) { printf("Unable to open %s for reading\n", file2); return -1; } lenTemp = fread(&buf[lenTotal], sizeof(char), sizeof(buf)-lenTotal, fp); lenTotal += lenTemp; printf("%d bytes read (hex: %#x )\n", lenTemp,lenTemp); fclose(fp); } if(file3) { if (NULL == (fp = fopen(file3, "rb"))) { printf("Unable to open %s for reading\n", file3); return -1; } lenTemp = fread(&buf[lenTotal], sizeof(char), sizeof(buf)-lenTotal, fp); lenTotal += lenTemp; printf("%d bytes read (hex: %#x )\n", lenTemp,lenTemp); fclose(fp); } printf("\n"); printf("%d bytes read (hex: %#x ) total \n", lenTotal,lenTotal); time_t rawtime; time (&rawtime); struct tm *timeinfo; timeinfo = localtime(&rawtime); // sprintf(filenameout,"fwupdate_%s.bin",ctime(&rawtime)); sprintf(filenameout,"OSTC4update_%02u%02u%02u.bin",timeinfo->tm_year-100,timeinfo->tm_mon+1,timeinfo->tm_mday); fpout = fopen(filenameout, "wb"); for(int i = 0;i <lenTotal;i++) { if(fwrite(&buf[i],1,1,fpout) != 1) printf("error writing\n"); } hw_ostc3_firmware_checksum(&buf2[0],&buf2[1],&buf2[2],&buf2[3],buf,lenTotal); printf("checksum %#x %#x %#x %#x\n", buf2[0],buf2[1], buf2[2], buf2[3]); if(fwrite(&buf2[0],1,4,fpout) != 4) printf("error writing checksum\n"); ; fclose(fpout); }