view Small_CPU/Src/tm_stm32f4_otp.c @ 328:4fe5400567e7 I2C_Improvment

Set I2C speed to 88kHz, use digital filter only and reworked idle clock recovery The errata describes a possible problem in operation between 88kHz and 100kHz => Set speed as recommended as work around. Based on reference implementation only one filter should be use. Choice was digital because only drawback is lag of wakeup functionality which is not used I2C communication may be randomly interrupted e.g. by a RTE reset or firmware update => reworked recovery function to get I2C devices in idle state again (Clk and SDA HIGH)
author ideenmodellierer
date Wed, 17 Jul 2019 22:42:15 +0200
parents 5f11787b4f42
children
line wrap: on
line source

/**	
 * |----------------------------------------------------------------------
 * | Copyright (C) Tilen Majerle, 2014
 * | 
 * | This program is free software: you can redistribute it and/or modify
 * | it under the terms of the GNU General Public License as published by
 * | the Free Software Foundation, either version 3 of the License, or
 * | any later version.
 * |  
 * | This program is distributed in the hope that it will be useful,
 * | but WITHOUT ANY WARRANTY; without even the implied warranty of
 * | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * | GNU General Public License for more details.
 * | 
 * | You should have received a copy of the GNU General Public License
 * | along with this program.  If not, see <http://www.gnu.org/licenses/>.
 * |----------------------------------------------------------------------
 */
#include "tm_stm32f4_otp.h"

HAL_StatusTypeDef TM_OTP_Write(uint8_t block, uint8_t byte, uint8_t data)
{
	HAL_StatusTypeDef answer;

	/* Check input parameters */
	if (
		block >= OTP_BLOCKS ||
		byte >= OTP_BYTES_IN_BLOCK
	) {
		/* Invalid parameters */
		return HAL_ERROR;
	}

	if(*(uint8_t *)(OTP_START_ADDR + block * OTP_BYTES_IN_BLOCK + byte) != 0xFF)
		return HAL_ERROR;	

	/* Unlock FLASH */
	HAL_FLASH_Unlock();

	answer = HAL_FLASH_Program(FLASH_TYPEPROGRAM_BYTE, (OTP_START_ADDR + block * OTP_BYTES_IN_BLOCK + byte), data);

	/* Lock FLASH */
	HAL_FLASH_Lock();

	return answer;
}


uint8_t TM_OTP_Read(uint8_t block, uint8_t byte) {
	uint8_t data;
	
	/* Check input parameters */
	if (
		block >= OTP_BLOCKS ||
		byte >= OTP_BYTES_IN_BLOCK
	) {
		/* Invalid parameters */
		return HAL_ERROR;
	}
	
	/* Get value */
	data = *(__IO uint8_t *)(OTP_START_ADDR + block * OTP_BYTES_IN_BLOCK + byte);
	
	/* Return data */
	return data;
}