Mercurial > public > ostc4
view Small_CPU/Src/adc.c @ 328:4fe5400567e7 I2C_Improvment
Set I2C speed to 88kHz, use digital filter only and reworked idle clock recovery
The errata describes a possible problem in operation between 88kHz and 100kHz => Set speed as recommended as work around.
Based on reference implementation only one filter should be use. Choice was digital because only drawback is lag of wakeup functionality which is not used
I2C communication may be randomly interrupted e.g. by a RTE reset or firmware update => reworked recovery function to get I2C devices in idle state again (Clk and SDA HIGH)
author | ideenmodellierer |
---|---|
date | Wed, 17 Jul 2019 22:42:15 +0200 |
parents | 5f11787b4f42 |
children |
line wrap: on
line source
/** ****************************************************************************** * @file adc.c * @author heinrichs weikamp gmbh * @version V0.0.1 * @date 11-Dec-2014 * @brief ADC for ambient light sensor * @verbatim ============================================================================== ##### How to use ##### ============================================================================== @endverbatim ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2014 heinrichs weikamp</center></h2> * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal.h" #include "adc.h" /* Exported variables --------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ ADC_HandleTypeDef AdcHandle; __IO uint16_t uhADCxConvertedValue = 0; /* Private types -------------------------------------------------------------*/ #define ADCx ADC1 #define ADCx_CLK_ENABLE() __ADC1_CLK_ENABLE(); #define ADCx_CHANNEL_GPIO_CLK_ENABLE() __GPIOF_CLK_ENABLE() #define ADCx_FORCE_RESET() __ADC_FORCE_RESET() #define ADCx_RELEASE_RESET() __ADC_RELEASE_RESET() /* Definition for ADCx Channel Pin */ #define ADCx_GPIO_PIN GPIO_PIN_0 #define ADCx_GPIO_PORT GPIOB #define ADCx_GPIO_CLK_ENABLE() __GPIOB_CLK_ENABLE() #define ADCx_GPIO_CLK_DISABLE() __GPIOB_CLK_DISABLE() /* Definition for ADCx's Channel */ #define ADCx_CHANNEL ADC_CHANNEL_8 /* Definition for ADCx's NVIC */ //#define ADCx_IRQn ADC_IRQn /* Private function prototypes -----------------------------------------------*/ void ADC_Start_single_IT_Conversion(void); /* Exported functions --------------------------------------------------------*/ uint16_t get_ambient_light_level(void) { #ifdef OSTC_ON_DISCOVERY_HARDWARE return 800; #endif return uhADCxConvertedValue; } static void ADCx_MspInit(ADC_HandleTypeDef *hadc) { #ifdef OSTC_ON_DISCOVERY_HARDWARE return; #endif GPIO_InitTypeDef GPIO_InitStruct; ADCx_GPIO_CLK_ENABLE(); GPIO_InitStruct.Pin = ADCx_GPIO_PIN ; GPIO_InitStruct.Mode = GPIO_MODE_ANALOG; GPIO_InitStruct.Pull = GPIO_NOPULL; HAL_GPIO_Init(ADCx_GPIO_PORT, &GPIO_InitStruct); ADCx_CLK_ENABLE(); // HAL_NVIC_SetPriority(ADCx_IRQn, 2, 0); // HAL_NVIC_EnableIRQ(ADCx_IRQn); } void ADCx_DeInit(void) { // HAL_ADC_Stop_IT(&AdcHandle); HAL_ADC_DeInit(&AdcHandle); } void ADCx_Init(void) { #ifdef OSTC_ON_DISCOVERY_HARDWARE return; #endif ADC_ChannelConfTypeDef sConfig; AdcHandle.Instance = ADCx; AdcHandle.Init.ClockPrescaler = ADC_CLOCKPRESCALER_PCLK_DIV4; AdcHandle.Init.Resolution = ADC_RESOLUTION12b; AdcHandle.Init.DataAlign = ADC_DATAALIGN_RIGHT; AdcHandle.Init.ContinuousConvMode = DISABLE; AdcHandle.Init.DiscontinuousConvMode = DISABLE; AdcHandle.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE; AdcHandle.Init.EOCSelection = EOC_SINGLE_CONV; AdcHandle.Init.NbrOfConversion = 1; AdcHandle.Init.DMAContinuousRequests = DISABLE; ADCx_MspInit(&AdcHandle); HAL_ADC_Init(&AdcHandle); sConfig.Channel = ADCx_CHANNEL; sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES; sConfig.Rank = 1; sConfig.Offset = 0; HAL_ADC_ConfigChannel(&AdcHandle, &sConfig); // ADC_Start_single_IT_Conversion(); } uint32_t adc_debug_status = 0; void adc_ambient_light_sensor_get_data(void) { #ifdef OSTC_ON_DISCOVERY_HARDWARE return; #endif HAL_ADC_Start(&AdcHandle); HAL_ADC_PollForConversion(&AdcHandle, 10); adc_debug_status = HAL_ADC_GetState(&AdcHandle); if(adc_debug_status == HAL_ADC_STATE_EOC_REG + HAL_ADC_STATE_READY) // new HAL_ADC_STATE_READY 160613 // if(HAL_ADC_GetState(&AdcHandle) == HAL_ADC_STATE_EOC_REG) uhADCxConvertedValue = HAL_ADC_GetValue(&AdcHandle); HAL_ADC_Stop(&AdcHandle); } /* Private functions ---------------------------------------------------------*/ /* void ADC_Start_single_IT_Conversion(void) { HAL_ADC_Start_IT(&AdcHandle); } void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* AdcHandle) { extern void copyAmbientLightData(void); uhADCxConvertedValue = HAL_ADC_GetValue(AdcHandle); copyAmbientLightData(); ADC_Start_single_IT_Conversion(); } */ /************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/