Mercurial > public > ostc4
view Documentations/dump-disc.cfg @ 316:4da2bffb07ca Bugfix_Flip_FirmwareUpdate
Bugfix text display in update mode (flipped display) and reduction of timeout in case of a failed firmware update
The text shown during firmware update was not shown in the correct position => updated screen orientation
In case of an interrupt of a firmware update the sw was froozen for about 60 seconds (former timeout for receiption of data block). To reduce the timeout to 6 seconds the receiption of date will now be split into blocks of 16k byte instead of 64k byte.
author | ideenmodellierer |
---|---|
date | Mon, 17 Jun 2019 21:47:33 +0200 |
parents | 01cc5959f199 |
children |
line wrap: on
line source
#! openocd -f # Define the prob used: source [find interface/stlink-v2.cfg] set WORKAREASIZE 0x8000 transport select hla_swd # Reset options set ENABLE_LOW_POWER 1 set STOP_WATCHDOG 1 reset_config srst_only srst_nogate connect_assert_srst # Seelct the right chip set CHIPNAME stm32f427IIT6 set CONNECT_UNDER_RESET 1 source [find target/stm32f4x.cfg] # Allow to continue execution after a connection: init_reset run puts "Flash banks:" flash banks #puts "Reading FIRMWARE..." # Requires OpenOCD 0.10.0 / released January 2017 ? #flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000 #puts "Done." exit