view ostc4pack/src/checksum_final_add_fletcher.cpp @ 475:4b000e2386c2 Improve_Button_Sleep

Changed default values: Invalid pressure was signalled using the float 100.0 causing the OSTC to enter dive mode if for some I2C communication was disturbed during startup. The default value for button responsitivness was set to 85% without considering the needed HWOS transformation calculation. Applying that the value for 85% is 51 PowerOnReset is state is now identified using the same functionality as already introduced for the battery charge handling. Initialization of pressure sensor in case of I2C problems only if the initialization was not successfull before: The pressure sensor is reset via a I2C commend in case of a I2C error. A reset might be helpfull in case of a "hanging" ADC operation but that would not be indicated by a I2C problem => resetting the sensor in case of a I2C problem might cause (small) change of pressure value
author ideenmodellierer
date Tue, 12 May 2020 22:52:05 +0200
parents 1e707b34667e
children 01f40cb1057e
line wrap: on
line source

#include <iostream>
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <time.h>

void fletcher16(unsigned char *result1, unsigned char *result2, unsigned char const *data, size_t bytes )
{
        unsigned short sum1 = 0xff, sum2 = 0xff;
        size_t tlen;
 
        while (bytes) {
                tlen = bytes >= 20 ? 20 : bytes;
                bytes -= tlen;
                do {
                        sum2 += sum1 += *data++;
                } while (--tlen);
                sum1 = (sum1 & 0xff) + (sum1 >> 8);
                sum2 = (sum2 & 0xff) + (sum2 >> 8);
        }
        /* Second reduction step to reduce sums to 8 bits */
        sum1 = (sum1 & 0xff) + (sum1 >> 8);
        sum2 = (sum2 & 0xff) + (sum2 >> 8);
        *result2 = (sum2 & 0xff);
        *result1 = (sum1 & 0xff);
//        return sum2 << 8 | sum1;
}


// This is a variant of fletcher16 with a 16 bit sum instead of an 8 bit sum,
// and modulo 2^16 instead of 2^16-1
void
hw_ostc3_firmware_checksum (unsigned char *result1, unsigned char *result2, unsigned char *result3, unsigned char *result4, unsigned char const *data, size_t bytes )
{
	unsigned short low = 0;
	unsigned short high = 0;
	for (unsigned int i = 0; i < bytes; i++) {
		low  += data[i];
		high += low;
	}
        *result1 = (low & 0xff);
        *result2 = (low/256 & 0xff);
        *result3 = (unsigned char)(high & 0xff);
        *result4 = (unsigned char)((high/256) & 0xff);
//	return (((unsigned int)high) << 16) + low;
}


int main(int argc, char** argv) {
	
	
	FILE *fp, * fpout;
	size_t lenTotal,lenTemp;
	unsigned char buf[2000000];
	char *file = argv[1];
	char *file2 =  argv[2];
	char *file3 =  argv[3];
	unsigned int pruefsumme;
	unsigned char buf2[4];

   	printf("1: %s\n",  file);
   	printf("2: %s\n",  file2);
   	printf("3: %s\n",  file3);
   	printf("\n");
     
	
		//write File with length and cheksum
	char filename[500], filenameout[510] ;
	sprintf(filename,"%s",file);
	int filelength = strlen(filename);
	filename[filelength -4] = 0;
	
	lenTotal = 0;
	if (NULL == (fp = fopen(file, "rb")))
	{
	    printf("Unable to open %s for reading\n", file);
	    return -1;
	}
	lenTemp = fread(&buf[lenTotal], sizeof(char), sizeof(buf), fp);
//	lenTemp = fread(buf, sizeof(char), sizeof(buf), fp);
	lenTotal = lenTemp;
	printf("%d bytes read (hex: %#x )\n", lenTemp,lenTemp);
	fclose(fp);

	if(file2)
	{
		if (NULL == (fp = fopen(file2, "rb")))
		{
		    printf("Unable to open %s for reading\n", file2);
		    return -1;
		}
		lenTemp = fread(&buf[lenTotal], sizeof(char), sizeof(buf)-lenTotal, fp);
		lenTotal += lenTemp;
		printf("%d bytes read (hex: %#x )\n", lenTemp,lenTemp);
		fclose(fp);
	}
	if(file3)
	{
		if (NULL == (fp = fopen(file3, "rb")))
		{
		    printf("Unable to open %s for reading\n", file3);
		    return -1;
		}
		lenTemp = fread(&buf[lenTotal], sizeof(char), sizeof(buf)-lenTotal, fp);
		lenTotal += lenTemp;
		printf("%d bytes read (hex: %#x )\n", lenTemp,lenTemp);
		fclose(fp);
	}

   	printf("\n");
	printf("%d bytes read (hex: %#x ) total \n", lenTotal,lenTotal);

	time_t rawtime;
	time (&rawtime);
	struct tm *timeinfo;
	timeinfo = localtime(&rawtime);
	
//	sprintf(filenameout,"fwupdate_%s.bin",ctime(&rawtime));
	sprintf(filenameout,"OSTC4update_%02u%02u%02u.bin",timeinfo->tm_year-100,timeinfo->tm_mon+1,timeinfo->tm_mday);

    fpout = fopen(filenameout, "wb");     
    for(int i = 0;i <lenTotal;i++)
    {
    	if(fwrite(&buf[i],1,1,fpout) != 1)
     	printf("error writing\n");
	}
	
	hw_ostc3_firmware_checksum(&buf2[0],&buf2[1],&buf2[2],&buf2[3],buf,lenTotal);
	printf("checksum  %#x %#x %#x %#x\n", buf2[0],buf2[1], buf2[2], buf2[3]);
   	if(fwrite(&buf2[0],1,4,fpout) != 4)
    	printf("error writing checksum\n");
    ;
	fclose(fpout);
}