view Small_CPU/Src/tm_stm32f4_otp.c @ 475:4b000e2386c2 Improve_Button_Sleep

Changed default values: Invalid pressure was signalled using the float 100.0 causing the OSTC to enter dive mode if for some I2C communication was disturbed during startup. The default value for button responsitivness was set to 85% without considering the needed HWOS transformation calculation. Applying that the value for 85% is 51 PowerOnReset is state is now identified using the same functionality as already introduced for the battery charge handling. Initialization of pressure sensor in case of I2C problems only if the initialization was not successfull before: The pressure sensor is reset via a I2C commend in case of a I2C error. A reset might be helpfull in case of a "hanging" ADC operation but that would not be indicated by a I2C problem => resetting the sensor in case of a I2C problem might cause (small) change of pressure value
author ideenmodellierer
date Tue, 12 May 2020 22:52:05 +0200
parents 5f11787b4f42
children
line wrap: on
line source

/**	
 * |----------------------------------------------------------------------
 * | Copyright (C) Tilen Majerle, 2014
 * | 
 * | This program is free software: you can redistribute it and/or modify
 * | it under the terms of the GNU General Public License as published by
 * | the Free Software Foundation, either version 3 of the License, or
 * | any later version.
 * |  
 * | This program is distributed in the hope that it will be useful,
 * | but WITHOUT ANY WARRANTY; without even the implied warranty of
 * | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * | GNU General Public License for more details.
 * | 
 * | You should have received a copy of the GNU General Public License
 * | along with this program.  If not, see <http://www.gnu.org/licenses/>.
 * |----------------------------------------------------------------------
 */
#include "tm_stm32f4_otp.h"

HAL_StatusTypeDef TM_OTP_Write(uint8_t block, uint8_t byte, uint8_t data)
{
	HAL_StatusTypeDef answer;

	/* Check input parameters */
	if (
		block >= OTP_BLOCKS ||
		byte >= OTP_BYTES_IN_BLOCK
	) {
		/* Invalid parameters */
		return HAL_ERROR;
	}

	if(*(uint8_t *)(OTP_START_ADDR + block * OTP_BYTES_IN_BLOCK + byte) != 0xFF)
		return HAL_ERROR;	

	/* Unlock FLASH */
	HAL_FLASH_Unlock();

	answer = HAL_FLASH_Program(FLASH_TYPEPROGRAM_BYTE, (OTP_START_ADDR + block * OTP_BYTES_IN_BLOCK + byte), data);

	/* Lock FLASH */
	HAL_FLASH_Lock();

	return answer;
}


uint8_t TM_OTP_Read(uint8_t block, uint8_t byte) {
	uint8_t data;
	
	/* Check input parameters */
	if (
		block >= OTP_BLOCKS ||
		byte >= OTP_BYTES_IN_BLOCK
	) {
		/* Invalid parameters */
		return HAL_ERROR;
	}
	
	/* Get value */
	data = *(__IO uint8_t *)(OTP_START_ADDR + block * OTP_BYTES_IN_BLOCK + byte);
	
	/* Return data */
	return data;
}