view Small_CPU/Inc/pressure.h @ 475:4b000e2386c2 Improve_Button_Sleep

Changed default values: Invalid pressure was signalled using the float 100.0 causing the OSTC to enter dive mode if for some I2C communication was disturbed during startup. The default value for button responsitivness was set to 85% without considering the needed HWOS transformation calculation. Applying that the value for 85% is 51 PowerOnReset is state is now identified using the same functionality as already introduced for the battery charge handling. Initialization of pressure sensor in case of I2C problems only if the initialization was not successfull before: The pressure sensor is reset via a I2C commend in case of a I2C error. A reset might be helpfull in case of a "hanging" ADC operation but that would not be indicated by a I2C problem => resetting the sensor in case of a I2C problem might cause (small) change of pressure value
author ideenmodellierer
date Tue, 12 May 2020 22:52:05 +0200
parents 4093ac18b25c
children
line wrap: on
line source

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef PRESSURE_H
#define PRESSURE_H

#include <stdint.h>

uint8_t init_pressure(void);
void pressure_set_offset (float pressureOffset, float temperatureOffset);

uint8_t pressure_update(void);
void pressure_update_alternating(void);

uint8_t is_init_pressure_done(void);

HAL_StatusTypeDef  pressure_sensor_get_pressure_raw(void);
HAL_StatusTypeDef  pressure_sensor_get_temperature_raw(void);
void pressure_calculation(void);

float get_temperature(void);
float get_pressure_mbar(void);
float get_surface_mbar(void);

uint8_t is_surface_pressure_stable(void);
float set_last_surface_pressure_stable(void);

void init_surface_ring(uint8_t force);
void update_surface_pressure(uint8_t call_rhythm_seconds);

uint32_t demo_modify_temperature_and_pressure(int32_t divetime_in_seconds, uint8_t subseconds, float ceiling_mbar);

#endif /* PRESSURE_H */