view Discovery/Inc/simulation.h @ 475:4b000e2386c2 Improve_Button_Sleep

Changed default values: Invalid pressure was signalled using the float 100.0 causing the OSTC to enter dive mode if for some I2C communication was disturbed during startup. The default value for button responsitivness was set to 85% without considering the needed HWOS transformation calculation. Applying that the value for 85% is 51 PowerOnReset is state is now identified using the same functionality as already introduced for the battery charge handling. Initialization of pressure sensor in case of I2C problems only if the initialization was not successfull before: The pressure sensor is reset via a I2C commend in case of a I2C error. A reset might be helpfull in case of a "hanging" ADC operation but that would not be indicated by a I2C problem => resetting the sensor in case of a I2C problem might cause (small) change of pressure value
author ideenmodellierer
date Tue, 12 May 2020 22:52:05 +0200
parents 2bb1db22b5f5
children 55a9aa740f13
line wrap: on
line source

///////////////////////////////////////////////////////////////////////////////
/// -*- coding: UTF-8 -*-
///
/// \file   Discovery/Inc/simulation.h
/// \brief
/// \author Heinrichs Weikamp
/// \date   2018
///
/// $Id$
///////////////////////////////////////////////////////////////////////////////
/// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh
///
///     This program is free software: you can redistribute it and/or modify
///     it under the terms of the GNU General Public License as published by
///     the Free Software Foundation, either version 3 of the License, or
///     (at your option) any later version.
///
///     This program is distributed in the hope that it will be useful,
///     but WITHOUT ANY WARRANTY; without even the implied warranty of
///     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
///     GNU General Public License for more details.
///
///     You should have received a copy of the GNU General Public License
///     along with this program.  If not, see <http://www.gnu.org/licenses/>.
//////////////////////////////////////////////////////////////////////////////

#ifndef SIMULATION_H
#define SIMULATION_H

#include "stm32f4xx_hal.h"
#include "data_central.h"

typedef struct
{
    uint8_t depthMeterFirstStop;
    uint8_t descentRateMeterPerMinute;
    uint8_t ascentRateMeterPerMinute;
    uint16_t timeToBottom;
    uint16_t timeAtBottom;
    uint16_t timeToFirstStop;
    uint16_t timeToSurface;
    float	ppO2AtBottom;
} SSimDataSummary;

void simulation_start(int aim_depth);
void simulation_exit(void);

void simulation_set_heed_decostops(_Bool heed_decostops_while_ascending);

void simulation_UpdateLifeData( _Bool checkOncePerSecond);
void simulation_set_zero_time_descent(void);

uint16_t simulation_get_aim_depth(void);
_Bool simulation_get_heed_decostops(void);
SDecoinfo* simulation_decoplaner(uint16_t depth_meter, uint16_t intervall_time_minutes, uint16_t dive_time_minutes, uint8_t *gasChangeListDepthGas20x2);
SDecoinfo* simulation_decoplaner_Bachelorarbeit_VPM(uint16_t depth_meter, uint16_t intervall_time_minutes, uint16_t dive_time_minutes, uint8_t *gasChangeListDepthGas20x2);
void simulation_gas_consumption(uint16_t *outputConsumptionList, uint16_t depth_meter, uint16_t dive_time_minutes, SDecoinfo *decoInfoInput, uint8_t gasConsumTravelInput, uint8_t gasConsumDecoInput, const uint8_t *gasChangeListDepthGas20x2);
void simulation_helper_change_points(SSimDataSummary *outputSummary, uint16_t depth_meter, uint16_t dive_time_minutes, SDecoinfo *decoInfoInput, const uint8_t *gasChangeListDepthGas20x2);


void Sim_Descend (void);
void Sim_Ascend (void);
void Sim_Divetime (void);
void Sim_Quit (void);


#endif /* SIMULATION_H */