Mercurial > public > ostc4

view Documentations/dump-disc.cfg @ 940:4a406e873a95 Evo_2_23 tip

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
GNSS improvments: - Introduce alive indicator; Status string will switch between white and grey with every message received from the module - shorten visibility of "shutting down" string. a busy wait of 1 second was applied in the sleep prepare function. The time is now included in the time needed to prepare the module for low power operation - make sure GPIO is properly initialized after deep sleep
author Ideenmodellierer
date Thu, 12 Dec 2024 21:12:07 +0100
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f427IIT6
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

puts "Flash banks:"
flash banks

#puts "Reading FIRMWARE..."
# Requires OpenOCD 0.10.0 / released January 2017 ?
#flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000

#puts "Done."
exit