Mercurial > public > ostc4

view Documentations/dump-disc.cfg @ 916:4832981f9af8 Evo_2_23

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
External sensor UART: Switch to DMA TX transfers: The previous version used polling tx function to transfer data. Because of the short command length of the protocols supported this was no big issue. New protocolls (like GNSS) have longer command sequence which have an impact to the program flow. That's why the implementation has been changed to DMA transmission.
author Ideenmodellierer
date Mon, 28 Oct 2024 20:34:58 +0100
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f427IIT6
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

puts "Flash banks:"
flash banks

#puts "Reading FIRMWARE..."
# Requires OpenOCD 0.10.0 / released January 2017 ?
#flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000

#puts "Done."
exit