Mercurial > public > ostc4
view Common/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_sdmmc.h @ 944:44599695df41 Evo_2_23
Restructure Date/Time menu:
To have more space for upcoming optins the selection of the date format (DDMMYY) has been moved into a submenu. In addition the function was upgraded to support multi language handling.
| author | Ideenmodellierer |
|---|---|
| date | Thu, 19 Dec 2024 18:58:18 +0100 |
| parents | c78bcbd5deda |
| children |
line wrap: on
line source
/** ****************************************************************************** * @file stm32f4xx_ll_sdmmc.h * @author MCD Application Team * @brief Header file of SDMMC HAL module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_LL_SDMMC_H #define __STM32F4xx_LL_SDMMC_H #ifdef __cplusplus extern "C" { #endif #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal_def.h" /** @addtogroup STM32F4xx_Driver * @{ */ /** @addtogroup SDMMC_LL * @{ */ /* Exported types ------------------------------------------------------------*/ /** @defgroup SDMMC_LL_Exported_Types SDMMC_LL Exported Types * @{ */ /** * @brief SDMMC Configuration Structure definition */ typedef struct { uint32_t ClockEdge; /*!< Specifies the clock transition on which the bit capture is made. This parameter can be a value of @ref SDMMC_LL_Clock_Edge */ uint32_t ClockBypass; /*!< Specifies whether the SDMMC Clock divider bypass is enabled or disabled. This parameter can be a value of @ref SDMMC_LL_Clock_Bypass */ uint32_t ClockPowerSave; /*!< Specifies whether SDMMC Clock output is enabled or disabled when the bus is idle. This parameter can be a value of @ref SDMMC_LL_Clock_Power_Save */ uint32_t BusWide; /*!< Specifies the SDMMC bus width. This parameter can be a value of @ref SDMMC_LL_Bus_Wide */ uint32_t HardwareFlowControl; /*!< Specifies whether the SDMMC hardware flow control is enabled or disabled. This parameter can be a value of @ref SDMMC_LL_Hardware_Flow_Control */ uint32_t ClockDiv; /*!< Specifies the clock frequency of the SDMMC controller. This parameter can be a value between Min_Data = 0 and Max_Data = 255 */ }SDIO_InitTypeDef; /** * @brief SDMMC Command Control structure */ typedef struct { uint32_t Argument; /*!< Specifies the SDMMC command argument which is sent to a card as part of a command message. If a command contains an argument, it must be loaded into this register before writing the command to the command register. */ uint32_t CmdIndex; /*!< Specifies the SDMMC command index. It must be Min_Data = 0 and Max_Data = 64 */ uint32_t Response; /*!< Specifies the SDMMC response type. This parameter can be a value of @ref SDMMC_LL_Response_Type */ uint32_t WaitForInterrupt; /*!< Specifies whether SDMMC wait for interrupt request is enabled or disabled. This parameter can be a value of @ref SDMMC_LL_Wait_Interrupt_State */ uint32_t CPSM; /*!< Specifies whether SDMMC Command path state machine (CPSM) is enabled or disabled. This parameter can be a value of @ref SDMMC_LL_CPSM_State */ }SDIO_CmdInitTypeDef; /** * @brief SDMMC Data Control structure */ typedef struct { uint32_t DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */ uint32_t DataLength; /*!< Specifies the number of data bytes to be transferred. */ uint32_t DataBlockSize; /*!< Specifies the data block size for block transfer. This parameter can be a value of @ref SDMMC_LL_Data_Block_Size */ uint32_t TransferDir; /*!< Specifies the data transfer direction, whether the transfer is a read or write. This parameter can be a value of @ref SDMMC_LL_Transfer_Direction */ uint32_t TransferMode; /*!< Specifies whether data transfer is in stream or block mode. This parameter can be a value of @ref SDMMC_LL_Transfer_Type */ uint32_t DPSM; /*!< Specifies whether SDMMC Data path state machine (DPSM) is enabled or disabled. This parameter can be a value of @ref SDMMC_LL_DPSM_State */ }SDIO_DataInitTypeDef; /** * @} */ /* Exported constants --------------------------------------------------------*/ /** @defgroup SDMMC_LL_Exported_Constants SDMMC_LL Exported Constants * @{ */ #define SDMMC_ERROR_NONE 0x00000000U /*!< No error */ #define SDMMC_ERROR_CMD_CRC_FAIL 0x00000001U /*!< Command response received (but CRC check failed) */ #define SDMMC_ERROR_DATA_CRC_FAIL 0x00000002U /*!< Data block sent/received (CRC check failed) */ #define SDMMC_ERROR_CMD_RSP_TIMEOUT 0x00000004U /*!< Command response timeout */ #define SDMMC_ERROR_DATA_TIMEOUT 0x00000008U /*!< Data timeout */ #define SDMMC_ERROR_TX_UNDERRUN 0x00000010U /*!< Transmit FIFO underrun */ #define SDMMC_ERROR_RX_OVERRUN 0x00000020U /*!< Receive FIFO overrun */ #define SDMMC_ERROR_ADDR_MISALIGNED 0x00000040U /*!< Misaligned address */ #define SDMMC_ERROR_BLOCK_LEN_ERR 0x00000080U /*!< Transferred block length is not allowed for the card or the number of transferred bytes does not match the block length */ #define SDMMC_ERROR_ERASE_SEQ_ERR 0x00000100U /*!< An error in the sequence of erase command occurs */ #define SDMMC_ERROR_BAD_ERASE_PARAM 0x00000200U /*!< An invalid selection for erase groups */ #define SDMMC_ERROR_WRITE_PROT_VIOLATION 0x00000400U /*!< Attempt to program a write protect block */ #define SDMMC_ERROR_LOCK_UNLOCK_FAILED 0x00000800U /*!< Sequence or password error has been detected in unlock command or if there was an attempt to access a locked card */ #define SDMMC_ERROR_COM_CRC_FAILED 0x00001000U /*!< CRC check of the previous command failed */ #define SDMMC_ERROR_ILLEGAL_CMD 0x00002000U /*!< Command is not legal for the card state */ #define SDMMC_ERROR_CARD_ECC_FAILED 0x00004000U /*!< Card internal ECC was applied but failed to correct the data */ #define SDMMC_ERROR_CC_ERR 0x00008000U /*!< Internal card controller error */ #define SDMMC_ERROR_GENERAL_UNKNOWN_ERR 0x00010000U /*!< General or unknown error */ #define SDMMC_ERROR_STREAM_READ_UNDERRUN 0x00020000U /*!< The card could not sustain data reading in stream rmode */ #define SDMMC_ERROR_STREAM_WRITE_OVERRUN 0x00040000U /*!< The card could not sustain data programming in stream mode */ #define SDMMC_ERROR_CID_CSD_OVERWRITE 0x00080000U /*!< CID/CSD overwrite error */ #define SDMMC_ERROR_WP_ERASE_SKIP 0x00100000U /*!< Only partial address space was erased */ #define SDMMC_ERROR_CARD_ECC_DISABLED 0x00200000U /*!< Command has been executed without using internal ECC */ #define SDMMC_ERROR_ERASE_RESET 0x00400000U /*!< Erase sequence was cleared before executing because an out of erase sequence command was received */ #define SDMMC_ERROR_AKE_SEQ_ERR 0x00800000U /*!< Error in sequence of authentication */ #define SDMMC_ERROR_INVALID_VOLTRANGE 0x01000000U /*!< Error in case of invalid voltage range */ #define SDMMC_ERROR_ADDR_OUT_OF_RANGE 0x02000000U /*!< Error when addressed block is out of range */ #define SDMMC_ERROR_REQUEST_NOT_APPLICABLE 0x04000000U /*!< Error when command request is not applicable */ #define SDMMC_ERROR_INVALID_PARAMETER 0x08000000U /*!< the used parameter is not valid */ #define SDMMC_ERROR_UNSUPPORTED_FEATURE 0x10000000U /*!< Error when feature is not insupported */ #define SDMMC_ERROR_BUSY 0x20000000U /*!< Error when transfer process is busy */ #define SDMMC_ERROR_DMA 0x40000000U /*!< Error while DMA transfer */ #define SDMMC_ERROR_TIMEOUT 0x80000000U /*!< Timeout error */ /** * @brief SDMMC Commands Index */ #define SDMMC_CMD_GO_IDLE_STATE ((uint8_t)0) /*!< Resets the SD memory card. */ #define SDMMC_CMD_SEND_OP_COND ((uint8_t)1) /*!< Sends host capacity support information and activates the card's initialization process. */ #define SDMMC_CMD_ALL_SEND_CID ((uint8_t)2) /*!< Asks any card connected to the host to send the CID numbers on the CMD line. */ #define SDMMC_CMD_SET_REL_ADDR ((uint8_t)3) /*!< Asks the card to publish a new relative address (RCA). */ #define SDMMC_CMD_SET_DSR ((uint8_t)4) /*!< Programs the DSR of all cards. */ #define SDMMC_CMD_SDMMC_SEN_OP_COND ((uint8_t)5) /*!< Sends host capacity support information (HCS) and asks the accessed card to send its operating condition register (OCR) content in the response on the CMD line. */ #define SDMMC_CMD_HS_SWITCH ((uint8_t)6) /*!< Checks switchable function (mode 0) and switch card function (mode 1). */ #define SDMMC_CMD_SEL_DESEL_CARD ((uint8_t)7) /*!< Selects the card by its own relative address and gets deselected by any other address */ #define SDMMC_CMD_HS_SEND_EXT_CSD ((uint8_t)8) /*!< Sends SD Memory Card interface condition, which includes host supply voltage information and asks the card whether card supports voltage. */ #define SDMMC_CMD_SEND_CSD ((uint8_t)9) /*!< Addressed card sends its card specific data (CSD) on the CMD line. */ #define SDMMC_CMD_SEND_CID ((uint8_t)10) /*!< Addressed card sends its card identification (CID) on the CMD line. */ #define SDMMC_CMD_READ_DAT_UNTIL_STOP ((uint8_t)11) /*!< SD card doesn't support it. */ #define SDMMC_CMD_STOP_TRANSMISSION ((uint8_t)12) /*!< Forces the card to stop transmission. */ #define SDMMC_CMD_SEND_STATUS ((uint8_t)13) /*!< Addressed card sends its status register. */ #define SDMMC_CMD_HS_BUSTEST_READ ((uint8_t)14) /*!< Reserved */ #define SDMMC_CMD_GO_INACTIVE_STATE ((uint8_t)15) /*!< Sends an addressed card into the inactive state. */ #define SDMMC_CMD_SET_BLOCKLEN ((uint8_t)16) /*!< Sets the block length (in bytes for SDSC) for all following block commands (read, write, lock). Default block length is fixed to 512 Bytes. Not effective for SDHS and SDXC. */ #define SDMMC_CMD_READ_SINGLE_BLOCK ((uint8_t)17) /*!< Reads single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of fixed 512 bytes in case of SDHC and SDXC. */ #define SDMMC_CMD_READ_MULT_BLOCK ((uint8_t)18) /*!< Continuously transfers data blocks from card to host until interrupted by STOP_TRANSMISSION command. */ #define SDMMC_CMD_HS_BUSTEST_WRITE ((uint8_t)19) /*!< 64 bytes tuning pattern is sent for SDR50 and SDR104. */ #define SDMMC_CMD_WRITE_DAT_UNTIL_STOP ((uint8_t)20) /*!< Speed class control command. */ #define SDMMC_CMD_SET_BLOCK_COUNT ((uint8_t)23) /*!< Specify block count for CMD18 and CMD25. */ #define SDMMC_CMD_WRITE_SINGLE_BLOCK ((uint8_t)24) /*!< Writes single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of fixed 512 bytes in case of SDHC and SDXC. */ #define SDMMC_CMD_WRITE_MULT_BLOCK ((uint8_t)25) /*!< Continuously writes blocks of data until a STOP_TRANSMISSION follows. */ #define SDMMC_CMD_PROG_CID ((uint8_t)26) /*!< Reserved for manufacturers. */ #define SDMMC_CMD_PROG_CSD ((uint8_t)27) /*!< Programming of the programmable bits of the CSD. */ #define SDMMC_CMD_SET_WRITE_PROT ((uint8_t)28) /*!< Sets the write protection bit of the addressed group. */ #define SDMMC_CMD_CLR_WRITE_PROT ((uint8_t)29) /*!< Clears the write protection bit of the addressed group. */ #define SDMMC_CMD_SEND_WRITE_PROT ((uint8_t)30) /*!< Asks the card to send the status of the write protection bits. */ #define SDMMC_CMD_SD_ERASE_GRP_START ((uint8_t)32) /*!< Sets the address of the first write block to be erased. (For SD card only). */ #define SDMMC_CMD_SD_ERASE_GRP_END ((uint8_t)33) /*!< Sets the address of the last write block of the continuous range to be erased. */ #define SDMMC_CMD_ERASE_GRP_START ((uint8_t)35) /*!< Sets the address of the first write block to be erased. Reserved for each command system set by switch function command (CMD6). */ #define SDMMC_CMD_ERASE_GRP_END ((uint8_t)36) /*!< Sets the address of the last write block of the continuous range to be erased. Reserved for each command system set by switch function command (CMD6). */ #define SDMMC_CMD_ERASE ((uint8_t)38) /*!< Reserved for SD security applications. */ #define SDMMC_CMD_FAST_IO ((uint8_t)39) /*!< SD card doesn't support it (Reserved). */ #define SDMMC_CMD_GO_IRQ_STATE ((uint8_t)40) /*!< SD card doesn't support it (Reserved). */ #define SDMMC_CMD_LOCK_UNLOCK ((uint8_t)42) /*!< Sets/resets the password or lock/unlock the card. The size of the data block is set by the SET_BLOCK_LEN command. */ #define SDMMC_CMD_APP_CMD ((uint8_t)55) /*!< Indicates to the card that the next command is an application specific command rather than a standard command. */ #define SDMMC_CMD_GEN_CMD ((uint8_t)56) /*!< Used either to transfer a data block to the card or to get a data block from the card for general purpose/application specific commands. */ #define SDMMC_CMD_NO_CMD ((uint8_t)64) /*!< No command */ /** * @brief Following commands are SD Card Specific commands. * SDMMC_APP_CMD should be sent before sending these commands. */ #define SDMMC_CMD_APP_SD_SET_BUSWIDTH ((uint8_t)6) /*!< (ACMD6) Defines the data bus width to be used for data transfer. The allowed data bus widths are given in SCR register. */ #define SDMMC_CMD_SD_APP_STATUS ((uint8_t)13) /*!< (ACMD13) Sends the SD status. */ #define SDMMC_CMD_SD_APP_SEND_NUM_WRITE_BLOCKS ((uint8_t)22) /*!< (ACMD22) Sends the number of the written (without errors) write blocks. Responds with 32bit+CRC data block. */ #define SDMMC_CMD_SD_APP_OP_COND ((uint8_t)41) /*!< (ACMD41) Sends host capacity support information (HCS) and asks the accessed card to send its operating condition register (OCR) content in the response on the CMD line. */ #define SDMMC_CMD_SD_APP_SET_CLR_CARD_DETECT ((uint8_t)42) /*!< (ACMD42) Connect/Disconnect the 50 KOhm pull-up resistor on CD/DAT3 (pin 1) of the card */ #define SDMMC_CMD_SD_APP_SEND_SCR ((uint8_t)51) /*!< Reads the SD Configuration Register (SCR). */ #define SDMMC_CMD_SDMMC_RW_DIRECT ((uint8_t)52) /*!< For SD I/O card only, reserved for security specification. */ #define SDMMC_CMD_SDMMC_RW_EXTENDED ((uint8_t)53) /*!< For SD I/O card only, reserved for security specification. */ /** * @brief Following commands are SD Card Specific security commands. * SDMMC_CMD_APP_CMD should be sent before sending these commands. */ #define SDMMC_CMD_SD_APP_GET_MKB ((uint8_t)43) #define SDMMC_CMD_SD_APP_GET_MID ((uint8_t)44) #define SDMMC_CMD_SD_APP_SET_CER_RN1 ((uint8_t)45) #define SDMMC_CMD_SD_APP_GET_CER_RN2 ((uint8_t)46) #define SDMMC_CMD_SD_APP_SET_CER_RES2 ((uint8_t)47) #define SDMMC_CMD_SD_APP_GET_CER_RES1 ((uint8_t)48) #define SDMMC_CMD_SD_APP_SECURE_READ_MULTIPLE_BLOCK ((uint8_t)18) #define SDMMC_CMD_SD_APP_SECURE_WRITE_MULTIPLE_BLOCK ((uint8_t)25) #define SDMMC_CMD_SD_APP_SECURE_ERASE ((uint8_t)38) #define SDMMC_CMD_SD_APP_CHANGE_SECURE_AREA ((uint8_t)49) #define SDMMC_CMD_SD_APP_SECURE_WRITE_MKB ((uint8_t)48) /** * @brief Masks for errors Card Status R1 (OCR Register) */ #define SDMMC_OCR_ADDR_OUT_OF_RANGE 0x80000000U #define SDMMC_OCR_ADDR_MISALIGNED 0x40000000U #define SDMMC_OCR_BLOCK_LEN_ERR 0x20000000U #define SDMMC_OCR_ERASE_SEQ_ERR 0x10000000U #define SDMMC_OCR_BAD_ERASE_PARAM 0x08000000U #define SDMMC_OCR_WRITE_PROT_VIOLATION 0x04000000U #define SDMMC_OCR_LOCK_UNLOCK_FAILED 0x01000000U #define SDMMC_OCR_COM_CRC_FAILED 0x00800000U #define SDMMC_OCR_ILLEGAL_CMD 0x00400000U #define SDMMC_OCR_CARD_ECC_FAILED 0x00200000U #define SDMMC_OCR_CC_ERROR 0x00100000U #define SDMMC_OCR_GENERAL_UNKNOWN_ERROR 0x00080000U #define SDMMC_OCR_STREAM_READ_UNDERRUN 0x00040000U #define SDMMC_OCR_STREAM_WRITE_OVERRUN 0x00020000U #define SDMMC_OCR_CID_CSD_OVERWRITE 0x00010000U #define SDMMC_OCR_WP_ERASE_SKIP 0x00008000U #define SDMMC_OCR_CARD_ECC_DISABLED 0x00004000U #define SDMMC_OCR_ERASE_RESET 0x00002000U #define SDMMC_OCR_AKE_SEQ_ERROR 0x00000008U #define SDMMC_OCR_ERRORBITS 0xFDFFE008U /** * @brief Masks for R6 Response */ #define SDMMC_R6_GENERAL_UNKNOWN_ERROR 0x00002000U #define SDMMC_R6_ILLEGAL_CMD 0x00004000U #define SDMMC_R6_COM_CRC_FAILED 0x00008000U #define SDMMC_VOLTAGE_WINDOW_SD 0x80100000U #define SDMMC_HIGH_CAPACITY 0x40000000U #define SDMMC_STD_CAPACITY 0x00000000U #define SDMMC_CHECK_PATTERN 0x000001AAU #define SDMMC_MAX_VOLT_TRIAL 0x0000FFFFU #define SDMMC_MAX_TRIAL 0x0000FFFFU #define SDMMC_ALLZERO 0x00000000U #define SDMMC_WIDE_BUS_SUPPORT 0x00040000U #define SDMMC_SINGLE_BUS_SUPPORT 0x00010000U #define SDMMC_CARD_LOCKED 0x02000000U #define SDMMC_DATATIMEOUT 0xFFFFFFFFU #define SDMMC_0TO7BITS 0x000000FFU #define SDMMC_8TO15BITS 0x0000FF00U #define SDMMC_16TO23BITS 0x00FF0000U #define SDMMC_24TO31BITS 0xFF000000U #define SDMMC_MAX_DATA_LENGTH 0x01FFFFFFU #define SDMMC_HALFFIFO 0x00000008U #define SDMMC_HALFFIFOBYTES 0x00000020U /** * @brief Command Class supported */ #define SDIO_CCCC_ERASE 0x00000020U #define SDIO_CMDTIMEOUT 5000U /* Command send and response timeout */ #define SDIO_MAXERASETIMEOUT 63000U /* Max erase Timeout 63 s */ /** @defgroup SDIO_LL_Clock_Edge Clock Edge * @{ */ #define SDIO_CLOCK_EDGE_RISING 0x00000000U #define SDIO_CLOCK_EDGE_FALLING SDIO_CLKCR_NEGEDGE #define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_CLOCK_EDGE_RISING) || \ ((EDGE) == SDIO_CLOCK_EDGE_FALLING)) /** * @} */ /** @defgroup SDIO_LL_Clock_Bypass Clock Bypass * @{ */ #define SDIO_CLOCK_BYPASS_DISABLE 0x00000000U #define SDIO_CLOCK_BYPASS_ENABLE SDIO_CLKCR_BYPASS #define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_CLOCK_BYPASS_DISABLE) || \ ((BYPASS) == SDIO_CLOCK_BYPASS_ENABLE)) /** * @} */ /** @defgroup SDIO_LL_Clock_Power_Save Clock Power Saving * @{ */ #define SDIO_CLOCK_POWER_SAVE_DISABLE 0x00000000U #define SDIO_CLOCK_POWER_SAVE_ENABLE SDIO_CLKCR_PWRSAV #define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_CLOCK_POWER_SAVE_DISABLE) || \ ((SAVE) == SDIO_CLOCK_POWER_SAVE_ENABLE)) /** * @} */ /** @defgroup SDIO_LL_Bus_Wide Bus Width * @{ */ #define SDIO_BUS_WIDE_1B 0x00000000U #define SDIO_BUS_WIDE_4B SDIO_CLKCR_WIDBUS_0 #define SDIO_BUS_WIDE_8B SDIO_CLKCR_WIDBUS_1 #define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BUS_WIDE_1B) || \ ((WIDE) == SDIO_BUS_WIDE_4B) || \ ((WIDE) == SDIO_BUS_WIDE_8B)) /** * @} */ /** @defgroup SDIO_LL_Hardware_Flow_Control Hardware Flow Control * @{ */ #define SDIO_HARDWARE_FLOW_CONTROL_DISABLE 0x00000000U #define SDIO_HARDWARE_FLOW_CONTROL_ENABLE SDIO_CLKCR_HWFC_EN #define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_DISABLE) || \ ((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_ENABLE)) /** * @} */ /** @defgroup SDIO_LL_Clock_Division Clock Division * @{ */ #define IS_SDIO_CLKDIV(DIV) ((DIV) <= 0xFFU) /** * @} */ /** @defgroup SDIO_LL_Command_Index Command Index * @{ */ #define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40U) /** * @} */ /** @defgroup SDIO_LL_Response_Type Response Type * @{ */ #define SDIO_RESPONSE_NO 0x00000000U #define SDIO_RESPONSE_SHORT SDIO_CMD_WAITRESP_0 #define SDIO_RESPONSE_LONG SDIO_CMD_WAITRESP #define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_RESPONSE_NO) || \ ((RESPONSE) == SDIO_RESPONSE_SHORT) || \ ((RESPONSE) == SDIO_RESPONSE_LONG)) /** * @} */ /** @defgroup SDIO_LL_Wait_Interrupt_State Wait Interrupt * @{ */ #define SDIO_WAIT_NO 0x00000000U #define SDIO_WAIT_IT SDIO_CMD_WAITINT #define SDIO_WAIT_PEND SDIO_CMD_WAITPEND #define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_WAIT_NO) || \ ((WAIT) == SDIO_WAIT_IT) || \ ((WAIT) == SDIO_WAIT_PEND)) /** * @} */ /** @defgroup SDIO_LL_CPSM_State CPSM State * @{ */ #define SDIO_CPSM_DISABLE 0x00000000U #define SDIO_CPSM_ENABLE SDIO_CMD_CPSMEN #define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_DISABLE) || \ ((CPSM) == SDIO_CPSM_ENABLE)) /** * @} */ /** @defgroup SDIO_LL_Response_Registers Response Register * @{ */ #define SDIO_RESP1 0x00000000U #define SDIO_RESP2 0x00000004U #define SDIO_RESP3 0x00000008U #define SDIO_RESP4 0x0000000CU #define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || \ ((RESP) == SDIO_RESP2) || \ ((RESP) == SDIO_RESP3) || \ ((RESP) == SDIO_RESP4)) /** * @} */ /** @defgroup SDIO_LL_Data_Length Data Lenght * @{ */ #define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFFU) /** * @} */ /** @defgroup SDIO_LL_Data_Block_Size Data Block Size * @{ */ #define SDIO_DATABLOCK_SIZE_1B 0x00000000U #define SDIO_DATABLOCK_SIZE_2B SDIO_DCTRL_DBLOCKSIZE_0 #define SDIO_DATABLOCK_SIZE_4B SDIO_DCTRL_DBLOCKSIZE_1 #define SDIO_DATABLOCK_SIZE_8B (SDIO_DCTRL_DBLOCKSIZE_0|SDIO_DCTRL_DBLOCKSIZE_1) #define SDIO_DATABLOCK_SIZE_16B SDIO_DCTRL_DBLOCKSIZE_2 #define SDIO_DATABLOCK_SIZE_32B (SDIO_DCTRL_DBLOCKSIZE_0|SDIO_DCTRL_DBLOCKSIZE_2) #define SDIO_DATABLOCK_SIZE_64B (SDIO_DCTRL_DBLOCKSIZE_1|SDIO_DCTRL_DBLOCKSIZE_2) #define SDIO_DATABLOCK_SIZE_128B (SDIO_DCTRL_DBLOCKSIZE_0|SDIO_DCTRL_DBLOCKSIZE_1|SDIO_DCTRL_DBLOCKSIZE_2) #define SDIO_DATABLOCK_SIZE_256B SDIO_DCTRL_DBLOCKSIZE_3 #define SDIO_DATABLOCK_SIZE_512B (SDIO_DCTRL_DBLOCKSIZE_0|SDIO_DCTRL_DBLOCKSIZE_3) #define SDIO_DATABLOCK_SIZE_1024B (SDIO_DCTRL_DBLOCKSIZE_1|SDIO_DCTRL_DBLOCKSIZE_3) #define SDIO_DATABLOCK_SIZE_2048B (SDIO_DCTRL_DBLOCKSIZE_0|SDIO_DCTRL_DBLOCKSIZE_1|SDIO_DCTRL_DBLOCKSIZE_3) #define SDIO_DATABLOCK_SIZE_4096B (SDIO_DCTRL_DBLOCKSIZE_2|SDIO_DCTRL_DBLOCKSIZE_3) #define SDIO_DATABLOCK_SIZE_8192B (SDIO_DCTRL_DBLOCKSIZE_0|SDIO_DCTRL_DBLOCKSIZE_2|SDIO_DCTRL_DBLOCKSIZE_3) #define SDIO_DATABLOCK_SIZE_16384B (SDIO_DCTRL_DBLOCKSIZE_1|SDIO_DCTRL_DBLOCKSIZE_2|SDIO_DCTRL_DBLOCKSIZE_3) #define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DATABLOCK_SIZE_1B) || \ ((SIZE) == SDIO_DATABLOCK_SIZE_2B) || \ ((SIZE) == SDIO_DATABLOCK_SIZE_4B) || \ ((SIZE) == SDIO_DATABLOCK_SIZE_8B) || \ ((SIZE) == SDIO_DATABLOCK_SIZE_16B) || \ ((SIZE) == SDIO_DATABLOCK_SIZE_32B) || \ ((SIZE) == SDIO_DATABLOCK_SIZE_64B) || \ ((SIZE) == SDIO_DATABLOCK_SIZE_128B) || \ ((SIZE) == SDIO_DATABLOCK_SIZE_256B) || \ ((SIZE) == SDIO_DATABLOCK_SIZE_512B) || \ ((SIZE) == SDIO_DATABLOCK_SIZE_1024B) || \ ((SIZE) == SDIO_DATABLOCK_SIZE_2048B) || \ ((SIZE) == SDIO_DATABLOCK_SIZE_4096B) || \ ((SIZE) == SDIO_DATABLOCK_SIZE_8192B) || \ ((SIZE) == SDIO_DATABLOCK_SIZE_16384B)) /** * @} */ /** @defgroup SDIO_LL_Transfer_Direction Transfer Direction * @{ */ #define SDIO_TRANSFER_DIR_TO_CARD 0x00000000U #define SDIO_TRANSFER_DIR_TO_SDIO SDIO_DCTRL_DTDIR #define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TRANSFER_DIR_TO_CARD) || \ ((DIR) == SDIO_TRANSFER_DIR_TO_SDIO)) /** * @} */ /** @defgroup SDIO_LL_Transfer_Type Transfer Type * @{ */ #define SDIO_TRANSFER_MODE_BLOCK 0x00000000U #define SDIO_TRANSFER_MODE_STREAM SDIO_DCTRL_DTMODE #define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TRANSFER_MODE_BLOCK) || \ ((MODE) == SDIO_TRANSFER_MODE_STREAM)) /** * @} */ /** @defgroup SDIO_LL_DPSM_State DPSM State * @{ */ #define SDIO_DPSM_DISABLE 0x00000000U #define SDIO_DPSM_ENABLE SDIO_DCTRL_DTEN #define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_DISABLE) ||\ ((DPSM) == SDIO_DPSM_ENABLE)) /** * @} */ /** @defgroup SDIO_LL_Read_Wait_Mode Read Wait Mode * @{ */ #define SDIO_READ_WAIT_MODE_DATA2 0x00000000U #define SDIO_READ_WAIT_MODE_CLK (SDIO_DCTRL_RWMOD) #define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_READ_WAIT_MODE_CLK) || \ ((MODE) == SDIO_READ_WAIT_MODE_DATA2)) /** * @} */ /** @defgroup SDIO_LL_Interrupt_sources Interrupt Sources * @{ */ #define SDIO_IT_CCRCFAIL SDIO_STA_CCRCFAIL #define SDIO_IT_DCRCFAIL SDIO_STA_DCRCFAIL #define SDIO_IT_CTIMEOUT SDIO_STA_CTIMEOUT #define SDIO_IT_DTIMEOUT SDIO_STA_DTIMEOUT #define SDIO_IT_TXUNDERR SDIO_STA_TXUNDERR #define SDIO_IT_RXOVERR SDIO_STA_RXOVERR #define SDIO_IT_CMDREND SDIO_STA_CMDREND #define SDIO_IT_CMDSENT SDIO_STA_CMDSENT #define SDIO_IT_DATAEND SDIO_STA_DATAEND #define SDIO_IT_STBITERR SDIO_STA_STBITERR #define SDIO_IT_DBCKEND SDIO_STA_DBCKEND #define SDIO_IT_CMDACT SDIO_STA_CMDACT #define SDIO_IT_TXACT SDIO_STA_TXACT #define SDIO_IT_RXACT SDIO_STA_RXACT #define SDIO_IT_TXFIFOHE SDIO_STA_TXFIFOHE #define SDIO_IT_RXFIFOHF SDIO_STA_RXFIFOHF #define SDIO_IT_TXFIFOF SDIO_STA_TXFIFOF #define SDIO_IT_RXFIFOF SDIO_STA_RXFIFOF #define SDIO_IT_TXFIFOE SDIO_STA_TXFIFOE #define SDIO_IT_RXFIFOE SDIO_STA_RXFIFOE #define SDIO_IT_TXDAVL SDIO_STA_TXDAVL #define SDIO_IT_RXDAVL SDIO_STA_RXDAVL #define SDIO_IT_SDIOIT SDIO_STA_SDIOIT #define SDIO_IT_CEATAEND SDIO_STA_CEATAEND /** * @} */ /** @defgroup SDIO_LL_Flags Flags * @{ */ #define SDIO_FLAG_CCRCFAIL SDIO_STA_CCRCFAIL #define SDIO_FLAG_DCRCFAIL SDIO_STA_DCRCFAIL #define SDIO_FLAG_CTIMEOUT SDIO_STA_CTIMEOUT #define SDIO_FLAG_DTIMEOUT SDIO_STA_DTIMEOUT #define SDIO_FLAG_TXUNDERR SDIO_STA_TXUNDERR #define SDIO_FLAG_RXOVERR SDIO_STA_RXOVERR #define SDIO_FLAG_CMDREND SDIO_STA_CMDREND #define SDIO_FLAG_CMDSENT SDIO_STA_CMDSENT #define SDIO_FLAG_DATAEND SDIO_STA_DATAEND #define SDIO_FLAG_STBITERR SDIO_STA_STBITERR #define SDIO_FLAG_DBCKEND SDIO_STA_DBCKEND #define SDIO_FLAG_CMDACT SDIO_STA_CMDACT #define SDIO_FLAG_TXACT SDIO_STA_TXACT #define SDIO_FLAG_RXACT SDIO_STA_RXACT #define SDIO_FLAG_TXFIFOHE SDIO_STA_TXFIFOHE #define SDIO_FLAG_RXFIFOHF SDIO_STA_RXFIFOHF #define SDIO_FLAG_TXFIFOF SDIO_STA_TXFIFOF #define SDIO_FLAG_RXFIFOF SDIO_STA_RXFIFOF #define SDIO_FLAG_TXFIFOE SDIO_STA_TXFIFOE #define SDIO_FLAG_RXFIFOE SDIO_STA_RXFIFOE #define SDIO_FLAG_TXDAVL SDIO_STA_TXDAVL #define SDIO_FLAG_RXDAVL SDIO_STA_RXDAVL #define SDIO_FLAG_SDIOIT SDIO_STA_SDIOIT #define SDIO_FLAG_CEATAEND SDIO_STA_CEATAEND #define SDIO_STATIC_FLAGS ((uint32_t)(SDIO_FLAG_CCRCFAIL | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_CTIMEOUT |\ SDIO_FLAG_DTIMEOUT | SDIO_FLAG_TXUNDERR | SDIO_FLAG_RXOVERR |\ SDIO_FLAG_CMDREND | SDIO_FLAG_CMDSENT | SDIO_FLAG_DATAEND |\ SDIO_FLAG_DBCKEND)) /** * @} */ /** * @} */ /* Exported macro ------------------------------------------------------------*/ /** @defgroup SDIO_LL_Exported_macros SDIO_LL Exported Macros * @{ */ /** @defgroup SDMMC_LL_Alias_Region Bit Address in the alias region * @{ */ /* ------------ SDIO registers bit address in the alias region -------------- */ #define SDIO_OFFSET (SDIO_BASE - PERIPH_BASE) /* --- CLKCR Register ---*/ /* Alias word address of CLKEN bit */ #define CLKCR_OFFSET (SDIO_OFFSET + 0x04U) #define CLKEN_BITNUMBER 0x08U #define CLKCR_CLKEN_BB (PERIPH_BB_BASE + (CLKCR_OFFSET * 32U) + (CLKEN_BITNUMBER * 4U)) /* --- CMD Register ---*/ /* Alias word address of SDIOSUSPEND bit */ #define CMD_OFFSET (SDIO_OFFSET + 0x0CU) #define SDIOSUSPEND_BITNUMBER 0x0BU #define CMD_SDIOSUSPEND_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32U) + (SDIOSUSPEND_BITNUMBER * 4U)) /* Alias word address of ENCMDCOMPL bit */ #define ENCMDCOMPL_BITNUMBER 0x0CU #define CMD_ENCMDCOMPL_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32U) + (ENCMDCOMPL_BITNUMBER * 4U)) /* Alias word address of NIEN bit */ #define NIEN_BITNUMBER 0x0DU #define CMD_NIEN_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32U) + (NIEN_BITNUMBER * 4U)) /* Alias word address of ATACMD bit */ #define ATACMD_BITNUMBER 0x0EU #define CMD_ATACMD_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32U) + (ATACMD_BITNUMBER * 4U)) /* --- DCTRL Register ---*/ /* Alias word address of DMAEN bit */ #define DCTRL_OFFSET (SDIO_OFFSET + 0x2CU) #define DMAEN_BITNUMBER 0x03U #define DCTRL_DMAEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (DMAEN_BITNUMBER * 4U)) /* Alias word address of RWSTART bit */ #define RWSTART_BITNUMBER 0x08U #define DCTRL_RWSTART_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (RWSTART_BITNUMBER * 4U)) /* Alias word address of RWSTOP bit */ #define RWSTOP_BITNUMBER 0x09U #define DCTRL_RWSTOP_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (RWSTOP_BITNUMBER * 4U)) /* Alias word address of RWMOD bit */ #define RWMOD_BITNUMBER 0x0AU #define DCTRL_RWMOD_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (RWMOD_BITNUMBER * 4U)) /* Alias word address of SDIOEN bit */ #define SDIOEN_BITNUMBER 0x0BU #define DCTRL_SDIOEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (SDIOEN_BITNUMBER * 4U)) /** * @} */ /** @defgroup SDIO_LL_Register Bits And Addresses Definitions * @brief SDIO_LL registers bit address in the alias region * @{ */ /* ---------------------- SDIO registers bit mask --------------------------- */ /* --- CLKCR Register ---*/ /* CLKCR register clear mask */ #define CLKCR_CLEAR_MASK ((uint32_t)(SDIO_CLKCR_CLKDIV | SDIO_CLKCR_PWRSAV |\ SDIO_CLKCR_BYPASS | SDIO_CLKCR_WIDBUS |\ SDIO_CLKCR_NEGEDGE | SDIO_CLKCR_HWFC_EN)) /* --- DCTRL Register ---*/ /* SDIO DCTRL Clear Mask */ #define DCTRL_CLEAR_MASK ((uint32_t)(SDIO_DCTRL_DTEN | SDIO_DCTRL_DTDIR |\ SDIO_DCTRL_DTMODE | SDIO_DCTRL_DBLOCKSIZE)) /* --- CMD Register ---*/ /* CMD Register clear mask */ #define CMD_CLEAR_MASK ((uint32_t)(SDIO_CMD_CMDINDEX | SDIO_CMD_WAITRESP |\ SDIO_CMD_WAITINT | SDIO_CMD_WAITPEND |\ SDIO_CMD_CPSMEN | SDIO_CMD_SDIOSUSPEND)) /* SDIO Initialization Frequency (400KHz max) */ #define SDIO_INIT_CLK_DIV ((uint8_t)0x76) /* SDIO Data Transfer Frequency (25MHz max) */ #define SDIO_TRANSFER_CLK_DIV ((uint8_t)0x0) /** * @} */ /** @defgroup SDIO_LL_Interrupt_Clock Interrupt And Clock Configuration * @brief macros to handle interrupts and specific clock configurations * @{ */ /** * @brief Enable the SDIO device. * @param __INSTANCE__ SDIO Instance * @retval None */ #define __SDIO_ENABLE(__INSTANCE__) (*(__IO uint32_t *)CLKCR_CLKEN_BB = ENABLE) /** * @brief Disable the SDIO device. * @param __INSTANCE__ SDIO Instance * @retval None */ #define __SDIO_DISABLE(__INSTANCE__) (*(__IO uint32_t *)CLKCR_CLKEN_BB = DISABLE) /** * @brief Enable the SDIO DMA transfer. * @param __INSTANCE__ SDIO Instance * @retval None */ #define __SDIO_DMA_ENABLE(__INSTANCE__) (*(__IO uint32_t *)DCTRL_DMAEN_BB = ENABLE) /** * @brief Disable the SDIO DMA transfer. * @param __INSTANCE__ SDIO Instance * @retval None */ #define __SDIO_DMA_DISABLE(__INSTANCE__) (*(__IO uint32_t *)DCTRL_DMAEN_BB = DISABLE) /** * @brief Enable the SDIO device interrupt. * @param __INSTANCE__ Pointer to SDIO register base * @param __INTERRUPT__ specifies the SDIO interrupt sources to be enabled. * This parameter can be one or a combination of the following values: * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt * @arg SDIO_IT_TXACT: Data transmit in progress interrupt * @arg SDIO_IT_RXACT: Data receive in progress interrupt * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt * @retval None */ #define __SDIO_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK |= (__INTERRUPT__)) /** * @brief Disable the SDIO device interrupt. * @param __INSTANCE__ Pointer to SDIO register base * @param __INTERRUPT__ specifies the SDIO interrupt sources to be disabled. * This parameter can be one or a combination of the following values: * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt * @arg SDIO_IT_TXACT: Data transmit in progress interrupt * @arg SDIO_IT_RXACT: Data receive in progress interrupt * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt * @retval None */ #define __SDIO_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK &= ~(__INTERRUPT__)) /** * @brief Checks whether the specified SDIO flag is set or not. * @param __INSTANCE__ Pointer to SDIO register base * @param __FLAG__ specifies the flag to check. * This parameter can be one of the following values: * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) * @arg SDIO_FLAG_CTIMEOUT: Command response timeout * @arg SDIO_FLAG_DTIMEOUT: Data timeout * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) * @arg SDIO_FLAG_CMDACT: Command transfer in progress * @arg SDIO_FLAG_TXACT: Data transmit in progress * @arg SDIO_FLAG_RXACT: Data receive in progress * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received * @retval The new state of SDIO_FLAG (SET or RESET). */ #define __SDIO_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->STA &(__FLAG__)) != RESET) /** * @brief Clears the SDIO pending flags. * @param __INSTANCE__ Pointer to SDIO register base * @param __FLAG__ specifies the flag to clear. * This parameter can be one or a combination of the following values: * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) * @arg SDIO_FLAG_CTIMEOUT: Command response timeout * @arg SDIO_FLAG_DTIMEOUT: Data timeout * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received * @retval None */ #define __SDIO_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->ICR = (__FLAG__)) /** * @brief Checks whether the specified SDIO interrupt has occurred or not. * @param __INSTANCE__ Pointer to SDIO register base * @param __INTERRUPT__ specifies the SDIO interrupt source to check. * This parameter can be one of the following values: * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt * @arg SDIO_IT_TXACT: Data transmit in progress interrupt * @arg SDIO_IT_RXACT: Data receive in progress interrupt * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt * @retval The new state of SDIO_IT (SET or RESET). */ #define __SDIO_GET_IT (__INSTANCE__, __INTERRUPT__) (((__INSTANCE__)->STA &(__INTERRUPT__)) == (__INTERRUPT__)) /** * @brief Clears the SDIO's interrupt pending bits. * @param __INSTANCE__ Pointer to SDIO register base * @param __INTERRUPT__ specifies the interrupt pending bit to clear. * This parameter can be one or a combination of the following values: * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt * @arg SDIO_IT_DATAEND: Data end (data counter, SDIO_DCOUNT, is zero) interrupt * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt * @retval None */ #define __SDIO_CLEAR_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->ICR = (__INTERRUPT__)) /** * @brief Enable Start the SD I/O Read Wait operation. * @param __INSTANCE__ Pointer to SDIO register base * @retval None */ #define __SDIO_START_READWAIT_ENABLE(__INSTANCE__) (*(__IO uint32_t *) DCTRL_RWSTART_BB = ENABLE) /** * @brief Disable Start the SD I/O Read Wait operations. * @param __INSTANCE__ Pointer to SDIO register base * @retval None */ #define __SDIO_START_READWAIT_DISABLE(__INSTANCE__) (*(__IO uint32_t *) DCTRL_RWSTART_BB = DISABLE) /** * @brief Enable Start the SD I/O Read Wait operation. * @param __INSTANCE__ Pointer to SDIO register base * @retval None */ #define __SDIO_STOP_READWAIT_ENABLE(__INSTANCE__) (*(__IO uint32_t *) DCTRL_RWSTOP_BB = ENABLE) /** * @brief Disable Stop the SD I/O Read Wait operations. * @param __INSTANCE__ Pointer to SDIO register base * @retval None */ #define __SDIO_STOP_READWAIT_DISABLE(__INSTANCE__) (*(__IO uint32_t *) DCTRL_RWSTOP_BB = DISABLE) /** * @brief Enable the SD I/O Mode Operation. * @param __INSTANCE__ Pointer to SDIO register base * @retval None */ #define __SDIO_OPERATION_ENABLE(__INSTANCE__) (*(__IO uint32_t *) DCTRL_SDIOEN_BB = ENABLE) /** * @brief Disable the SD I/O Mode Operation. * @param __INSTANCE__ Pointer to SDIO register base * @retval None */ #define __SDIO_OPERATION_DISABLE(__INSTANCE__) (*(__IO uint32_t *) DCTRL_SDIOEN_BB = DISABLE) /** * @brief Enable the SD I/O Suspend command sending. * @param __INSTANCE__ Pointer to SDIO register base * @retval None */ #define __SDIO_SUSPEND_CMD_ENABLE(__INSTANCE__) (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = ENABLE) /** * @brief Disable the SD I/O Suspend command sending. * @param __INSTANCE__ Pointer to SDIO register base * @retval None */ #define __SDIO_SUSPEND_CMD_DISABLE(__INSTANCE__) (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = DISABLE) #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) /** * @brief Enable the command completion signal. * @retval None */ #define __SDIO_CEATA_CMD_COMPLETION_ENABLE() (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = ENABLE) /** * @brief Disable the command completion signal. * @retval None */ #define __SDIO_CEATA_CMD_COMPLETION_DISABLE() (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = DISABLE) /** * @brief Enable the CE-ATA interrupt. * @retval None */ #define __SDIO_CEATA_ENABLE_IT() (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)0U) /** * @brief Disable the CE-ATA interrupt. * @retval None */ #define __SDIO_CEATA_DISABLE_IT() (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)1U) /** * @brief Enable send CE-ATA command (CMD61). * @retval None */ #define __SDIO_CEATA_SENDCMD_ENABLE() (*(__IO uint32_t *) CMD_ATACMD_BB = ENABLE) /** * @brief Disable send CE-ATA command (CMD61). * @retval None */ #define __SDIO_CEATA_SENDCMD_DISABLE() (*(__IO uint32_t *) CMD_ATACMD_BB = DISABLE) #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE ||\ STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ /** * @} */ /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @addtogroup SDMMC_LL_Exported_Functions * @{ */ /* Initialization/de-initialization functions **********************************/ /** @addtogroup HAL_SDMMC_LL_Group1 * @{ */ HAL_StatusTypeDef SDIO_Init(SDIO_TypeDef *SDIOx, SDIO_InitTypeDef Init); /** * @} */ /* I/O operation functions *****************************************************/ /** @addtogroup HAL_SDMMC_LL_Group2 * @{ */ uint32_t SDIO_ReadFIFO(SDIO_TypeDef *SDIOx); HAL_StatusTypeDef SDIO_WriteFIFO(SDIO_TypeDef *SDIOx, uint32_t *pWriteData); /** * @} */ /* Peripheral Control functions ************************************************/ /** @addtogroup HAL_SDMMC_LL_Group3 * @{ */ HAL_StatusTypeDef SDIO_PowerState_ON(SDIO_TypeDef *SDIOx); HAL_StatusTypeDef SDIO_PowerState_OFF(SDIO_TypeDef *SDIOx); uint32_t SDIO_GetPowerState(SDIO_TypeDef *SDIOx); /* Command path state machine (CPSM) management functions */ HAL_StatusTypeDef SDIO_SendCommand(SDIO_TypeDef *SDIOx, SDIO_CmdInitTypeDef *Command); uint8_t SDIO_GetCommandResponse(SDIO_TypeDef *SDIOx); uint32_t SDIO_GetResponse(SDIO_TypeDef *SDIOx, uint32_t Response); /* Data path state machine (DPSM) management functions */ HAL_StatusTypeDef SDIO_ConfigData(SDIO_TypeDef *SDIOx, SDIO_DataInitTypeDef* Data); uint32_t SDIO_GetDataCounter(SDIO_TypeDef *SDIOx); uint32_t SDIO_GetFIFOCount(SDIO_TypeDef *SDIOx); /* SDMMC Cards mode management functions */ HAL_StatusTypeDef SDIO_SetSDMMCReadWaitMode(SDIO_TypeDef *SDIOx, uint32_t SDIO_ReadWaitMode); /* SDMMC Commands management functions */ uint32_t SDMMC_CmdBlockLength(SDIO_TypeDef *SDIOx, uint32_t BlockSize); uint32_t SDMMC_CmdReadSingleBlock(SDIO_TypeDef *SDIOx, uint32_t ReadAdd); uint32_t SDMMC_CmdReadMultiBlock(SDIO_TypeDef *SDIOx, uint32_t ReadAdd); uint32_t SDMMC_CmdWriteSingleBlock(SDIO_TypeDef *SDIOx, uint32_t WriteAdd); uint32_t SDMMC_CmdWriteMultiBlock(SDIO_TypeDef *SDIOx, uint32_t WriteAdd); uint32_t SDMMC_CmdSDEraseStartAdd(SDIO_TypeDef *SDIOx, uint32_t StartAdd); uint32_t SDMMC_CmdSDEraseEndAdd(SDIO_TypeDef *SDIOx, uint32_t EndAdd); uint32_t SDMMC_CmdErase(SDIO_TypeDef *SDIOx); uint32_t SDMMC_CmdStopTransfer(SDIO_TypeDef *SDIOx); uint32_t SDMMC_CmdSelDesel(SDIO_TypeDef *SDIOx, uint64_t Addr); uint32_t SDMMC_CmdGoIdleState(SDIO_TypeDef *SDIOx); uint32_t SDMMC_CmdOperCond(SDIO_TypeDef *SDIOx); uint32_t SDMMC_CmdAppCommand(SDIO_TypeDef *SDIOx, uint32_t Argument); uint32_t SDMMC_CmdAppOperCommand(SDIO_TypeDef *SDIOx, uint32_t SdType); uint32_t SDMMC_CmdBusWidth(SDIO_TypeDef *SDIOx, uint32_t BusWidth); uint32_t SDMMC_CmdSendSCR(SDIO_TypeDef *SDIOx); uint32_t SDMMC_CmdSendCID(SDIO_TypeDef *SDIOx); uint32_t SDMMC_CmdSendCSD(SDIO_TypeDef *SDIOx, uint32_t Argument); uint32_t SDMMC_CmdSetRelAdd(SDIO_TypeDef *SDIOx, uint16_t *pRCA); uint32_t SDMMC_CmdSendStatus(SDIO_TypeDef *SDIOx, uint32_t Argument); uint32_t SDMMC_CmdStatusRegister(SDIO_TypeDef *SDIOx); uint32_t SDMMC_CmdOpCondition(SDIO_TypeDef *SDIOx, uint32_t Argument); uint32_t SDMMC_CmdSwitch(SDIO_TypeDef *SDIOx, uint32_t Argument); uint32_t SDMMC_CmdEraseStartAdd(SDIO_TypeDef *SDIOx, uint32_t StartAdd); uint32_t SDMMC_CmdEraseEndAdd(SDIO_TypeDef *SDIOx, uint32_t EndAdd); /** * @} */ /** * @} */ /** * @} */ /** * @} */ #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ #ifdef __cplusplus } #endif #endif /* __STM32F4xx_LL_SDMMC_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/